messages from 2014-04-24 06:40:41 to 2014-04-27 18:56:56 UTC [more...]
[U-Boot] usbtty using i.MX6
2014-04-27 18:56 UTC (5+ messages)
[U-Boot] [linux-sunxi] Uboot error: address not aligned in v7_dcache_inval_range
2014-04-27 18:47 UTC (12+ messages)
` [U-Boot] [PATCH 1/3] net/designware: ensure device private data is DMA aligned
` [U-Boot] [PATCH 2/3] net/designware: invalidate entire descriptor in dw_eth_send
[U-Boot] [PATCH v3 0/9] sunxi: initial upstreamining effort
2014-04-27 18:38 UTC (26+ messages)
` [U-Boot] [PATCH v3 1/9] sunxi: add sun7i clocks and timer support
` [U-Boot] [PATCH v3 2/9] sunxi: add sun7i pinmux and gpio support
` [U-Boot] [PATCH v3 3/9] sunxi: add sun7i dram setup support
` [U-Boot] [PATCH v3 5/9] sunxi: add support for Cubietruck booting in FEL mode
` [U-Boot] [PATCH v3 6/9] sunxi: add gmac Ethernet support
` [U-Boot] [PATCH v3 7/9] sunxi: mmc support
` [U-Boot] [PATCH v3 8/9] sunxi: non-FEL SPL boot support for sun7i
` [U-Boot] [PATCH v3 9/9] net/designware: Reduce DMA burst length
[U-Boot] [PATCH 0/3] cm_t54: add MAC address and env partiton handling
2014-04-27 10:18 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] cm-t54: add EEPROM support and MAC address handling
` [U-Boot] [PATCH 2/3] env_mmc: support env partition setup in runtime
` [U-Boot] [PATCH 3/3] cm-t54: add environment partition runtime detection
[U-Boot] [PATCH 0/4] ARM: OMAP5: add cm-t54 board support
2014-04-27 10:17 UTC (5+ messages)
` [U-Boot] [PATCH 1/4] ARM: OMAP5: add UART4 support
` [U-Boot] [PATCH 2/4] ARM: OMAP5: Power: add LDO2 support for Palmas driver
` [U-Boot] [PATCH 3/4] ARM: OMAP5: add CKO buffer control mask
` [U-Boot] [PATCH 4/4] cm-t54: add cm-t54 board support
[U-Boot] [PATCH v2 0/6] ARM: tegra: add nvec keyboard support for paz00
2014-04-27 1:14 UTC (7+ messages)
` [U-Boot] [PATCH v2 1/6] i2c: add slave mode support
` [U-Boot] [PATCH v2 2/6] ARM: tegra: "
` [U-Boot] [PATCH v2 3/6] ARM: tegra: i2c: add nvec driver
` [U-Boot] [PATCH v2 4/6] ARM: tegra: nvec: add keyboard support
` [U-Boot] [PATCH v2 5/6] ARM: tegra: paz00: add dt bindings for nvec
` [U-Boot] [PATCH v2 6/6] ARM: tegra: paz00: enable nvec keyboard
[U-Boot] [PATCH 0/11] Kconfig for U-Boot
2014-04-26 23:03 UTC (7+ messages)
` [U-Boot] [PATCH 01/11] kconfig: import Kconfig files from Linux v3.14 tag
` [U-Boot] [PATCH 02/11] Do not apply: tools: add genkconfig
` [U-Boot] [PATCH 03/11] kconfig: add board Kconfig and defconfig files
[U-Boot] [PATCH v4 00/10] ARMv7: add PSCI support to U-Boot
2014-04-26 21:34 UTC (15+ messages)
` [U-Boot] [PATCH v4 01/10] ARM: HYP/non-sec: move switch to non-sec to the last boot phase
` [U-Boot] [PATCH v4 02/10] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1
` [U-Boot] [PATCH v4 03/10] ARM: non-sec: reset CNTVOFF to zero
` [U-Boot] [PATCH v4 04/10] ARM: add missing HYP mode constant
` [U-Boot] [PATCH v4 05/10] ARM: HYP/non-sec: add separate section for secure code
` [U-Boot] [PATCH v4 06/10] ARM: HYP/non-sec: allow relocation to secure RAM
` [U-Boot] [PATCH v4 07/10] ARM: HYP/non-sec: add generic ARMv7 PSCI code
` [U-Boot] [PATCH v4 08/10] ARM: HYP/non-sec: add the option for a second-stage monitor
` [U-Boot] [PATCH v4 09/10] ARM: convert arch_fixup_memory_node to a generic FDT fixup function
` [U-Boot] [PATCH v4 10/10] ARM: HYP/non-sec/PSCI: emit DT nodes
` [U-Boot] DA850EVM with USE_NAND config does not pad the AIS file
[U-Boot] [PATCH] Start the deprecation process for generic board
2014-04-26 20:25 UTC (3+ messages)
[U-Boot] [RFC] RFC: convert MPC8536DS to use generic board
2014-04-26 20:18 UTC (5+ messages)
[U-Boot] [v2] powerpc/mpc8572ds: Increase u-boot size to 768KB
2014-04-26 3:56 UTC (2+ messages)
[U-Boot] Open Source Organizational Culture
2014-04-26 3:08 UTC
[U-Boot] [PATCH] board/freescale: Move CRC32 offset in NXID v1 data format
2014-04-25 23:38 UTC
[U-Boot] [PATCH] ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD
2014-04-25 23:15 UTC
[U-Boot] [PATCH] imx: ventana: add HDMI and LVDS display capability
2014-04-25 22:39 UTC
[U-Boot] [PATCH] imx: ventana: Convert to generic board
2014-04-25 22:17 UTC
[U-Boot] please pull u-boot-arc master
2014-04-25 19:45 UTC (2+ messages)
[U-Boot] Please pull u-boot-ppc4xx/master
2014-04-25 19:45 UTC (2+ messages)
[U-Boot] [PATCH 0/3] mpc83xx: add support for the ids8313 board
2014-04-25 19:45 UTC (4+ messages)
` [U-Boot] [GIT PULL] u-boot-mpc83xx: "
[U-Boot] Please pull u-boot-mpc85xx master
2014-04-25 19:44 UTC (2+ messages)
[U-Boot] SPI NOR MTD's
2014-04-25 19:41 UTC (2+ messages)
[U-Boot] [PATCH] spl: consolidate arch/arm/include/asm/arch-*/spl.h
2014-04-25 18:52 UTC (2+ messages)
[U-Boot] ARM: zynq: sdhci clock frequency init question
2014-04-25 16:19 UTC
[U-Boot] [PATCH] imx6: ventana: fix system-serial dt property
2014-04-25 16:18 UTC
[U-Boot] [PATCH v9 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions
2014-04-25 15:32 UTC
[U-Boot] [PATCH v9 0/2] S5P: Exynos: Add GPIO numbering feature
2014-04-25 15:31 UTC
[U-Boot] [PATCH 1/8] wandboard: Convert to generic board
2014-04-25 13:53 UTC (2+ messages)
[U-Boot] [PATCH 1/2] serial: zynq: Remove sparse warnings
2014-04-25 13:50 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] serial: zynq: Fix typo in suffix function name
[U-Boot] [PATCH] env_eeprom: Assign default environment during board_init_f
2014-04-25 13:49 UTC
[U-Boot] [PATCH] fat: Define MAX_CLUSTSIZE only if not defined in config
2014-04-25 13:48 UTC
[U-Boot] [PATCH] sf: params: Added support for Spansion S25FL512S_512K
2014-04-25 13:47 UTC
[U-Boot] [PATCH] i2c: zynq: Fixed compilation errors when using DEBUG
2014-04-25 13:46 UTC
[U-Boot] [PATCH 1/2] net: zynq: Use predefined macros instead of hardcoded value
2014-04-25 13:45 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] net: zynq: Fix sparse warnings in gem
[U-Boot] [PATCH v9 0/2] S5P: Exynos: Add GPIO numbering feature
2014-04-25 13:44 UTC (4+ messages)
` [U-Boot] [PATCH v9 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions
[U-Boot] [PATCH 0/18] ARM zynq changes
2014-04-25 13:42 UTC (19+ messages)
` [U-Boot] [PATCH 01/18] ARM: zynq: Fix sparse warnings in slcr.c
` [U-Boot] [PATCH 02/18] ARM: zynq: Fix sparse warning in ddrc.c
` [U-Boot] [PATCH 03/18] ARM: zynq: Remove sparse warnings
` [U-Boot] [PATCH 04/18] ARM: zynq: Added efuse status register base address
` [U-Boot] [PATCH 05/18] ARM: zynq: Do not use half memory size for ECC case
` [U-Boot] [PATCH 06/18] ARM: zynq: Call zynq board_init() in SPL
` [U-Boot] [PATCH 07/18] ARM: zynq: slcr: Fix incorrect commentary
` [U-Boot] [PATCH 08/18] ARM: zynq: Setup correct slcr_lock value
` [U-Boot] [PATCH 09/18] ARM: zynq: Fix bootmode mask
` [U-Boot] [PATCH 10/18] ARM: zynq: Fix building SPL without FPGA support
` [U-Boot] [PATCH 11/18] ARM: zynq: Extend kernel image size to 60MB
` [U-Boot] [PATCH 12/18] ARM: zynq: Add MIO detection code
` [U-Boot] [PATCH 13/18] ARM: zynq: ehci: Added USB host driver support
` [U-Boot] [PATCH 14/18] ARM: zynq: Added USB host support for zynq boards
` [U-Boot] [PATCH 15/18] ARM: zynq: Enable the FAT write capability
` [U-Boot] [PATCH 16/18] ARM: zynq: Move USB/SD/MMC common FAT configs
` [U-Boot] [PATCH 17/18] ARM: zynq: Enable EXT4 configs
` [U-Boot] [PATCH 18/18] ARM: zynq: Extend maximum number of command arguments
[U-Boot] [PATCH] hush shell: Avoid string write overflow when entering max cmd length
2014-04-25 13:35 UTC
[U-Boot] [PATCH v3 0/5] Android Fastboot support
2014-04-25 13:30 UTC (7+ messages)
` [U-Boot] [PATCH v4 "
` [U-Boot] [PATCH v4 4/5] usb/gadget: add the fastboot gadget
[U-Boot] [PATCH 1/9] fpga: spartan2: Avoid CamelCase
2014-04-25 13:30 UTC (9+ messages)
` [U-Boot] [PATCH 2/9] fpga: spartan3: "
` [U-Boot] [PATCH 3/9] fpga: virtex2: "
` [U-Boot] [PATCH 4/9] fpga: xilinx: Avoid CamelCase for in Xilinx_desc
` [U-Boot] [PATCH 5/9] fpga: xilinx: Fix the rest of CamelCases
` [U-Boot] [PATCH 6/9] fpga: xilinx: Simplify load/dump/info function handling
` [U-Boot] [PATCH 7/9] fpga: zynq: Remove sparse warnings
` [U-Boot] [PATCH 8/9] fpga: zynq: Use helper functions for zynq dma
` [U-Boot] [PATCH 9/9] fpga: zynq: Use helper function zynq_validate_bitstream
[U-Boot] [PATCH] kbuild: allow null board for spl build
2014-04-25 12:54 UTC
[U-Boot] [PATCH] arm: fdt_control: fix a build error with CONFIG_OF_EMBED=y
2014-04-25 12:51 UTC
[U-Boot] [PATCH v3 1/4] samsung: misc: allows using environmental macros as args in menu commands
2014-04-25 10:20 UTC (6+ messages)
` [U-Boot] [PATCH v4 1/5] "
` [U-Boot] [PATCH v4 2/5] samsung: misc: add gpt restore option to lcd menu
` [U-Boot] [PATCH v4 3/5] samsung: misc: add env default "
` [U-Boot] [PATCH v4 4/5] samsung: misc: keys: fix gpio key bouncing by adding 50 ms delay
` [U-Boot] [PATCH v4 5/5] samsung: misc: remove download mode info screen
[U-Boot] [PATCH] mtd: nand: omap_gpmc: Fix update of read_ecc in oob
2014-04-25 10:14 UTC (2+ messages)
[U-Boot] [PATCH] qe: disable qe when qe-ucode fails to be uploaded
2014-04-25 9:14 UTC
[U-Boot] [PATCH v2] powerpc/85xx: add T4080 SoC support
2014-04-25 8:31 UTC
[U-Boot] am33xx : bit-flip correction in oob
2014-04-25 8:19 UTC (7+ messages)
[U-Boot] iMX6 PCie inbound traffic not working
2014-04-25 6:19 UTC (3+ messages)
[U-Boot] [PATCH] powerpc: Increase u-boot size for selected boards
2014-04-25 5:49 UTC (5+ messages)
[U-Boot] Some PowerPC boards are broken
2014-04-25 5:09 UTC (2+ messages)
[U-Boot] [PATCH] lib/sha256: fix compile on some hosts
2014-04-25 4:59 UTC (2+ messages)
[U-Boot] [PATCH 1/5] usb: ci_udc: Support larger packets
2014-04-24 23:52 UTC (5+ messages)
` [U-Boot] [PATCH 2/5] usb: ci_udc: set ep->req.actual after transfer
` [U-Boot] [PATCH 3/5] usb: ci_udc: make PHY initialization conditional
` [U-Boot] [PATCH 4/5] usb: ci_udc: support variants with hostpc register
` [U-Boot] [PATCH 5/5] usb: ums: use only 1 buffer for CI_UDC
[U-Boot] [PATCH] ARM: tegra: use a CPU freq that all SKUs can support
2014-04-24 19:30 UTC
[U-Boot] [PATCH] dfu:fix: Replace wrong return value with proper one
2014-04-24 18:50 UTC (2+ messages)
[U-Boot] [PATCH v2] spi: soft_spi: Support NULL din/dout buffers
2014-04-24 18:39 UTC
[U-Boot] MMC: proposal to support multiple physical partitions
2014-04-24 17:50 UTC
[U-Boot] [PATCH 0/5] siemens: update and cleanup code
2014-04-24 15:57 UTC (6+ messages)
` [U-Boot] [PATCH 1/5] siemens: cosmetic: remove unused and rename defines
` [U-Boot] [PATCH 2/5] siemens: update DDR3 parameters for dxr2
` [U-Boot] [PATCH 3/5] siemens: add led cmd for flexible LED control
` [U-Boot] [PATCH 4/5] siemens: change LED indication in DFU mode
` [U-Boot] [PATCH 5/5] siemens: cosmetic: rename project_dir
[U-Boot] [PATCH] kbuild: Fix trailing whitespaces
2014-04-24 13:24 UTC
[U-Boot] [PATCH V2] 4xx: add support for new PMC440 revision with cleanup
2014-04-24 11:19 UTC (2+ messages)
[U-Boot] [PATCH 1/2] mtd: denali: improve nand_read_oob and fix nand_write_oob
2014-04-24 10:25 UTC (3+ messages)
[U-Boot] [PATCH v7] nand/denali: Adding Denali NAND driver support
2014-04-24 10:22 UTC (3+ messages)
[U-Boot] [PATCH 1/2] mtd: denali: improve nand_read_oob and fix nand_write_oob
2014-04-24 10:20 UTC (3+ messages)
[U-Boot] [PATCH v2] drivers/i2c/fsl_i2c: modify i2c_read to handle multi-byte write
2014-04-24 9:21 UTC
[U-Boot] [PATCH 0/4] ventana: Add LTC3676 PMIC support
2014-04-24 8:30 UTC (9+ messages)
` [U-Boot] [PATCH 1/4] power: make pfuze100 be able to coexist with other pmics
` [U-Boot] [PATCH 3/4] power: Add support for LTC3676 PMIC
` [U-Boot] [PATCH 4/4] [PATCH] ventana: Add support for the "
[U-Boot] [PATCH 0/2] eMMC: support for Read Protected Memory Block (RPMB)
2014-04-24 8:30 UTC (14+ messages)
` [U-Boot] [PATCH V4 0/3] "
` [U-Boot] [PATCH V4 1/3] eMMC: add support for operations in RPMB partition
` [U-Boot] [PATCH V4 3/3] eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command
` [U-Boot] [PATCH V5 0/3] eMMC: support for Read Protected Memory Block (RPMB)
` [U-Boot] [PATCH V5 1/3] eMMC: add support for operations in RPMB partition
` [U-Boot] [PATCH V5 2/3] Add the function 'confirm_yesno' for interactive
` [U-Boot] [PATCH V5 3/3] eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command
[U-Boot] [PATCH 00/11] MX6: SPL NAND support
2014-04-24 8:22 UTC (13+ messages)
` [U-Boot] [PATCH 07/11] MX6: use macro building for MX6Q/MX6DL iomux regs
` [U-Boot] [PATCH 11/11] ventana: switch to SPL
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox