public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
 messages from 2014-07-15 14:13:25 to 2014-07-18 17:09:44 UTC [more...]

[U-Boot] [PATCH 0/2] sunxi: FEL boot mode improvements
 2014-07-18 17:09 UTC  (2+ messages)
` [U-Boot] [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode

[U-Boot] [PATCH 00/14] sunxi: Allwinner A10/A13/A20 DRAM controller fixes
 2014-07-18 16:23 UTC  (15+ messages)
` [U-Boot] [PATCH 01/14] sunxi: dram: Remove useless 'dramc_scan_dll_para()' function
` [U-Boot] [PATCH 02/14] sunxi: dram: Remove broken super-standby remnants
` [U-Boot] [PATCH 03/14] sunxi: dram: Respect the DDR3 reset timing requirements
` [U-Boot] [PATCH 04/14] sunxi: dram: Code cleanup and comments for the CKE delay handling
` [U-Boot] [PATCH 05/14] sunxi: dram: Code cleanup for the impedance calibration
` [U-Boot] [PATCH 06/14] sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)
` [U-Boot] [PATCH 07/14] sunxi: dram: Use divisor P=1 for PLL5
` [U-Boot] [PATCH 08/14] sunxi: dram: Improve DQS gate data training error handling
` [U-Boot] [PATCH 09/14] sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'
` [U-Boot] [PATCH 10/14] sunxi: dram: Configurable DQS gating window mode and delay
` [U-Boot] [PATCH 11/14] sunxi: dram: Support sun4i (Allwinner A10) and sun5i (Allwinner A13)
` [U-Boot] [PATCH 12/14] sunxi: dram: Drop DDR2 support and assume only single rank DDR3 memory
` [U-Boot] [PATCH 13/14] sunxi: dram: Derive write recovery delay from DRAM clock speed
` [U-Boot] [PATCH 14/14] sunxi: dram: Autodetect DDR3 bus width and density

[U-Boot] [PATCH 1/5] am335x_evm: Move SPL network defines
 2014-07-18 15:51 UTC  (5+ messages)
` [U-Boot] [PATCH v3 2/5] TI:armv7: Change CONFIG_SPL_STACK to not be CONFIG_SYS_INIT_SP_ADDR
` [U-Boot] [PATCH 3/5] tseries: Set CONFIG_ENV_IS_NOWHERE for SPL+NAND
` [U-Boot] [PATCH 4/5] common/Makefile: Consolidate SPL ENV options, correct inclusion
` [U-Boot] [PATCH 5/5] am335x_evm: Enable CONFIG_SPL_ENV_SUPPORT on EMMC_BOOT

[U-Boot] [PATCH v5 00/12] Add support to Odroid U3/X2
 2014-07-18 15:29 UTC  (26+ messages)
` [U-Boot] [PATCH v5 01/12] samsung: misc: fix soc revision setting in the set_board_info()
` [U-Boot] [PATCH v5 02/12] exynos: pinmux: fix the gpio names for exynos4x12 mmc
` [U-Boot] [PATCH v5 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup
` [U-Boot] [PATCH v5 04/12] board:samsung: check the boot device and init the right mmc driver
` [U-Boot] [PATCH v5 05/12] samsung: misc: add function for setting $dfu_alt_info
` [U-Boot] [PATCH v5 06/12] samsung:board: misc_init_r: call set_dfu_alt_info()
` [U-Boot] [PATCH v5 07/12] arm:reset: call the reset_misc() before the cpu reset
` [U-Boot] [PATCH v5 08/12] samsung: board: enable support of multiple board types
` [U-Boot] [PATCH v5 09/12] samsung: misc: use board specific functions to set env board info
` [U-Boot] [PATCH v5 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412
` [U-Boot] [PATCH v5 11/12] odroid: add odroid U3/X2 device tree description
` [U-Boot] [PATCH v5 12/12] odroid: add odroid_config
` [U-Boot] [PATCH v6 00/12] Add support to Odroid U3/X2
  ` [U-Boot] [PATCH v6 01/12] samsung: misc: fix soc revision setting in the set_board_info()
  ` [U-Boot] [PATCH v6 02/12] exynos: pinmux: fix the gpio names for exynos4x12 mmc
  ` [U-Boot] [PATCH v6 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup
  ` [U-Boot] [PATCH v6 04/12] board:samsung: check the boot device and init the right mmc driver
  ` [U-Boot] [PATCH v6 05/12] samsung: misc: add function for setting $dfu_alt_info
  ` [U-Boot] [PATCH v6 06/12] samsung:board: misc_init_r: call set_dfu_alt_info()
  ` [U-Boot] [PATCH v6 07/12] arm:reset: call the reset_misc() before the cpu reset
  ` [U-Boot] [PATCH v6 08/12] samsung: board: enable support of multiple board types
  ` [U-Boot] [PATCH v6 09/12] samsung: misc: use board specific functions to set env board info
  ` [U-Boot] [PATCH v6 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412
  ` [U-Boot] [PATCH v6 11/12] odroid: add odroid U3/X2 device tree description
  ` [U-Boot] [PATCH v6 12/12] odroid: add odroid_config

[U-Boot] [PATCH v4] Add TQ Systems TQMa6 board support
 2014-07-18 14:52 UTC 

[U-Boot] uboot/odroid test report
 2014-07-18 14:48 UTC  (11+ messages)

[U-Boot] Random number generator - why I need it
 2014-07-18 14:41 UTC 

[U-Boot] [PATCH v2 0/5] sunxi: i2c and pmic support
 2014-07-18 13:51 UTC  (7+ messages)
` [U-Boot] [PATCH v2 3/5] sunxi: Add axp209 "

[U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB
 2014-07-18 13:11 UTC 

[U-Boot] [PATCH v1 0/3] ARM: omap: clean GPMC macros
 2014-07-18 12:29 UTC  (4+ messages)
` [U-Boot] [PATCH v1 1/3] ARM: omap: fix GPMC address-map size for NAND and NOR devices
` [U-Boot] [PATCH v1 2/3] ARM: omap: clean redundant PISMO_xx macros used in OMAP3
` [U-Boot] [PATCH v1 3/3] ARM: omap: move board specific NAND configs out from ti_armv7_common.h

[U-Boot] [PATCH] km-powerpc: define CONFIG_PRAM to protect PHRAM and PNVRAM
 2014-07-18  9:10 UTC  (3+ messages)

[U-Boot] [PATCH v2 0/2] ARM: atmel: sama5d3xek: enable NOR flash support
 2014-07-18  8:43 UTC  (3+ messages)
` [U-Boot] [PATCH v2 1/2] ARM: atmel: sama5d3xek: add nor flash init function
` [U-Boot] [PATCH v2 2/2] ARM: atmel: sama5d3xek: enable NOR flash support

[U-Boot] [PATCH] ARM: OMAP: Fix handling of errata i727
 2014-07-18  5:48 UTC 

[U-Boot] [PATCH] patman: make "No recipient" checking more tolerant
 2014-07-18  5:23 UTC 

[U-Boot] [PATCH v2 0/3] spi, sf: add mtdparts feature to spi and sf commands
 2014-07-18  4:19 UTC  (4+ messages)
` [U-Boot] [PATCH v2 1/3] mtd, spi: add MTD layer driver
` [U-Boot] [PATCH v2 2/3] mtd, nand: move common functions from cmd_nand.c to common place
` [U-Boot] [PATCH v2 3/3] spi, sf: use offset and size in sf cmd from mtdpartition

[U-Boot] [PATCH v4 0/6] arm, imx6: add aristainetos board support
 2014-07-18  4:07 UTC  (7+ messages)
` [U-Boot] [PATCH v4 1/6] imx6: add gpr2 usb_otg_id iomux select control define
` [U-Boot] [PATCH v4 2/6] i.MX6: define struct pwm_regs and PWMCR_* defines
` [U-Boot] [PATCH v4 3/6] pwm, imx6: add support for pwm modul on imx6
` [U-Boot] [PATCH v4 4/6] i.MX6: add enable_spi_clk()
` [U-Boot] [PATCH v4 5/6] spi: add config option to enable the WP pin function on st micron flashes
` [U-Boot] [PATCH v4 6/6] arm, imx6: add aristainetos board

[U-Boot] DM, Kconfig and clang changes
 2014-07-17 22:17 UTC  (3+ messages)

[U-Boot] ARM: 743626—An imprecise external abort, received while the processor enters WFI, may cause a processor deadlock
 2014-07-17 20:29 UTC  (2+ messages)

[U-Boot] [PATCH 0/25] Introduce driver model support for SPI, SPI flash, cros_ec
 2014-07-17 18:29 UTC  (8+ messages)
` [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI

[U-Boot] [PATCH v2 0/29] Add additional core driver model features
 2014-07-17 15:20 UTC  (6+ messages)
` [U-Boot] [PATCH v2 26/29] dm: Add child_pre_probe() and child_post_remove() methods

[U-Boot] [PATCH v1 0/7] TI: armv7: add parallel NAND support
 2014-07-17 12:57 UTC  (13+ messages)
` [U-Boot] [PATCH v1 2/7] board/ti/am335x: add support for beaglebone NAND cape
` [U-Boot] [PATCH v1 3/7] arm: lib: continue board_init_r even if valid flash device is not detected
` [U-Boot] [PATCH v1 4/7] board/ti/am335x: add support for beaglebone NOR Cape
` [U-Boot] [PATCH v1 6/7] board/ti/am43xx: add support for parallel NAND
` [U-Boot] [PATCH v1 7/7] board/ti/dra7xx: "

[U-Boot] [PATCH] kmp204x: set the ZL clk chips reset to power up only
 2014-07-17 12:22 UTC 

[U-Boot] socfpga: initialize MMC
 2014-07-17 12:01 UTC  (5+ messages)

[U-Boot] Enabling multiple serial ports for OMAP3 EVM on u-boot 2014.04
 2014-07-17 12:00 UTC 

[U-Boot] [RESEND PATCH v2] bcm2835_sdhci: Add SDHCI_QUIRK_NO_HISPD_BIT flag
 2014-07-17 11:57 UTC 

[U-Boot] [PATCH] socfpga: timer actually counts down
 2014-07-17 10:21 UTC  (2+ messages)

[U-Boot] [PATCH 0/3] Do not hard-code the command name 'make' in upper-level tools
 2014-07-17  9:18 UTC  (4+ messages)
` [U-Boot] [PATCH 1/3] scripts: add scripts/gnu_make to not hard-code make command
` [U-Boot] [PATCH 2/3] MAKEALL: make sure to invoke GNU Make
` [U-Boot] [PATCH 3/3] buildman: "

[U-Boot] [PATCH] powerpc/83xx: add support for kmtepr2 board
 2014-07-17  9:15 UTC 

[U-Boot] [PATCH v2 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support
 2014-07-17  8:43 UTC  (17+ messages)
` [U-Boot] [PATCH v2 1/5] sunxi: add defines to control USB Host clocks/resets
` [U-Boot] [PATCH v2 2/5] sunxi: add USB EHCI driver
    ` [U-Boot] [linux-sunxi] "
  ` [U-Boot] [linux-sunxi] "
` [U-Boot] [PATCH v2 3/5] sunxi: add USB options to configs
` [U-Boot] [PATCH v2 4/5] sun7i: add USB EHCI configuration
` [U-Boot] [PATCH v2 5/5] sun7i: cubietruck: enable USB EHCI

[U-Boot] [PATCH 0/3] spi, sf: add mtdparts feature to spi and sf commands
 2014-07-17  4:27 UTC  (4+ messages)
` [U-Boot] [PATCH 1/3] mtd, spi: add MTD layer driver

[U-Boot] [PATCH] .gitignore: clean-up unnecessary entries
 2014-07-17  3:16 UTC 

[U-Boot] A way to change the status of the whole series on Patchwork ?
 2014-07-17  2:49 UTC  (2+ messages)

[U-Boot] ARM: omap: Looking to dynamically setup ECC and nand settings during boot
 2014-07-16 20:53 UTC  (6+ messages)
  ` [U-Boot] "

[U-Boot] [PATCH] cmd_nand/cmd_ubi/cmd_nboot: Set environment variable 'filesize'
 2014-07-16 20:50 UTC  (3+ messages)

[U-Boot] Please pull u-boot-sunxi.git/next
 2014-07-16 19:31 UTC  (2+ messages)

[U-Boot] ARMv8 spin-table patches
 2014-07-16 15:37 UTC  (7+ messages)

[U-Boot] CPU Wachtog for P2041
 2014-07-16 15:29 UTC  (3+ messages)

[U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support
 2014-07-16 13:06 UTC  (7+ messages)

[U-Boot] new dev question
 2014-07-16 12:00 UTC 

[U-Boot] [PATCH v3 0/6] arm, imx6: add aristainetos board support
 2014-07-16  9:44 UTC  (11+ messages)
` [U-Boot] [PATCH v3 1/6] imx6: add gpr2 usb_otg_id iomux select control define
` [U-Boot] [PATCH v3 2/6] i.MX6: define struct pwm_regs and PWMCR_* defines
` [U-Boot] [PATCH v3 3/6] pwm, imx6: add support for pwm modul on imx6
` [U-Boot] [PATCH v3 4/6] i.MX6: add enable_spi_clk()
` [U-Boot] [PATCH v3 5/6] spi: add config option to enable the WP pin function on st micron flashes
` [U-Boot] [PATCH v3 6/6] arm, imx6: add aristainetos board

[U-Boot] [PATCH] dfu: fix: Add the absolute path to the file name for ext4 write operation
 2014-07-16  9:38 UTC 

[U-Boot] [ANN] U-Boot v2014.07 released
 2014-07-16  9:21 UTC  (2+ messages)

[U-Boot] [PATCH v2 0/3] Add .mailmap file and a tool to maintain it
 2014-07-16  8:49 UTC  (4+ messages)
` [U-Boot] [PATCH v2 1/3] add .mailmap for proper git-shortlog output
` [U-Boot] [PATCH v2 2/3] scripts: add mailmapper, a tool to create/update mailmap file
` [U-Boot] [PATCH v2 3/3] Update .mailmap using scripts/mailmapper

[U-Boot] [YBA] mx28evk.h CONFIG_EHCI_MXS_PORT0 power?
 2014-07-16  8:35 UTC  (2+ messages)

[U-Boot] [i2c] Pull request
 2014-07-16  8:06 UTC  (4+ messages)

[U-Boot] [GIT] Pull request: u-boot-dfu
 2014-07-16  7:18 UTC 

[U-Boot] i.MX tree out of sync
 2014-07-16  6:53 UTC  (2+ messages)

[U-Boot] [PATCH] board/ls2085a: Add support of NOR and NAND flash for simulator
 2014-07-16  3:51 UTC 

[U-Boot] [U-boot] [Patch 0/6] Add support for k2e SoC and EVM
 2014-07-15 21:59 UTC  (7+ messages)
` [U-Boot] [U-boot] [Patch 1/6] ARM: keystone2: add K2E SoC hardware definitions
` [U-Boot] [U-boot] [Patch 2/6] ARM: keystone2: clock: add K2E clock support
` [U-Boot] [U-boot] [Patch 3/6] ARM: keystone2: add MSMC cache coherency support for K2E SOC
` [U-Boot] [U-boot] [Patch 4/6] keystone2: use CONFIG_SOC_KEYSTONE in common places
` [U-Boot] [U-boot] [Patch 5/6] ARM: keystone2: spl: add K2E SoC support
` [U-Boot] [U-boot] [Patch 6/6] board: k2e-evm: add board support

[U-Boot] [PATCH] Fix help text of ext2load and fatload
 2014-07-15 21:37 UTC  (3+ messages)

[U-Boot] [PATCH] mx6: add support of multi-processor command
 2014-07-15 19:59 UTC  (6+ messages)
` [U-Boot] [PATCH v5] "

[U-Boot] [PATCH] lcd: support displaying 24bpp BMPs on >= 24bpp LCDs
 2014-07-15 14:28 UTC 


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox