messages from 2014-10-11 15:47:45 to 2014-10-14 20:21:05 UTC [more...]
[U-Boot] [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR
2014-10-14 20:21 UTC (4+ messages)
[U-Boot] [PATCH 0/3] arm: add interrupt support
2014-10-14 20:02 UTC (5+ messages)
` [U-Boot] [PATCH v2 0/3] arm: fix exception handling
` [U-Boot] [PATCH v2 2/3] arm: relocate the exception vectors
[U-Boot] [PATCH v2] powerpc/mpc85xx: modify erratum A007186
2014-10-14 19:22 UTC (2+ messages)
[U-Boot] [PATCH v3 1/3] net: Add a command to manipulate ethernet devices
2014-10-14 19:18 UTC (6+ messages)
` [U-Boot] [PATCH v3 2/3] net: Add a command to access the EEPROM from "
` [U-Boot] [PATCH v3 3/3] usb: eth: smsc95xx: Add EEPROM access support for LAN9514
[U-Boot] [PATCH 2/4] qe: add u-qe support to arm board
2014-10-14 19:03 UTC (2+ messages)
[U-Boot] [PATCH v2] ARM: tegra: Use mem size from MC in combination with get_ram_size()
2014-10-14 18:53 UTC (2+ messages)
[U-Boot] [PATCH 1/2] video: ipo: fix debug and comment
2014-10-14 18:37 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] video: ipu_disp: remove pixclk fixup
[U-Boot] [PATCH] powerpc/t104xrdb: make T104x board compliant in u-boot
2014-10-14 18:34 UTC (2+ messages)
[U-Boot] [PATCH v3] powerpc/85xx: enable some P1/P2 boards mtdparts for nor flash
2014-10-14 18:31 UTC (3+ messages)
[U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables
2014-10-14 18:05 UTC (4+ messages)
[U-Boot] [PATCH] Revert "common, env: Fix support for environment in i2c eeprom"
2014-10-14 14:21 UTC (5+ messages)
[U-Boot] [PATCH] Kconfig: Add EXPERT option
2014-10-14 12:39 UTC
[U-Boot] [PATCH] km_kirkwood: remove KM_ENV_BUS and use CONFIG_I2C_ENV_EEPROM_BUS
2014-10-14 12:05 UTC (2+ messages)
[U-Boot] dm: Should U-Boot driver model abandon platform data?
2014-10-14 11:18 UTC (2+ messages)
[U-Boot] [PATCH v2 1/2] imx: mx6sl: Add IOMUX setting for USDHC1-3
2014-10-14 10:51 UTC (4+ messages)
` [U-Boot] [PATCH v2 2/2] imx: mx6slevk: Add support for USDHC1 and USDHC3 slots
[U-Boot] [PATCH] sunxi: Add CONFIG_MACH_TYPE defines to sun4i, sun5i and sun7i
2014-10-14 9:56 UTC (2+ messages)
[U-Boot] [PATCH] dm: serial: Fix breakage due to stdio changes
2014-10-14 9:48 UTC (5+ messages)
[U-Boot] [ANN] U-Boot v2014.10 released
2014-10-14 8:47 UTC
[U-Boot] [PATCH] Makefile: drop "tools-only" from no-dot-config-targets
2014-10-14 8:27 UTC (2+ messages)
[U-Boot] [PATCH v10 02/14] patman: Fix indentation in terminal.py
2014-10-14 8:17 UTC (4+ messages)
` [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL
[U-Boot] Broken target
2014-10-14 8:15 UTC (6+ messages)
[U-Boot] [PATCH 0/14] dm: omap: Provide access to driver model for am335x, and move boards
2014-10-14 7:26 UTC (2+ messages)
[U-Boot] [PATCH v4 6/9] dm: imx: Use gpio_request() to request GPIOs
2014-10-14 7:25 UTC (5+ messages)
` [U-Boot] [PATCH 0/2] Split "dm: imx: Use gpio_request() to request GPIOs"
` [U-Boot] [PATCH 1/2] dm: imx: i2c: Use gpio_request() to request GPIOs
[U-Boot] [PATCH v2 2/2] imx: mx6sxsabresd: Add board support for USDHC2 and USDHC3
2014-10-14 6:36 UTC
[U-Boot] [PATCH v2 1/2] mmc: fsl_esdhc: Update esdhc driver for iMX6SX
2014-10-14 6:35 UTC
[U-Boot] [PATCH v2 1/2] net: Add a command to access the EEPROM from ethernet devices
2014-10-14 6:26 UTC (4+ messages)
[U-Boot] [PATCH v3 1/4] QuadSPI: use QSPI_CMD_xx instead of flash opcodes
2014-10-14 6:06 UTC (4+ messages)
` [U-Boot] [PATCH v3 2/4] QuadSPI: use correct amba_base
` [U-Boot] [PATCH v3 3/4] arm:mx6sx add QSPI support
` [U-Boot] [PATCH v3 4/4] imx:mx6sxsabresd add qspi support
[U-Boot] [PATCH v4 0/29] Introduce driver model support for SPI, SPI flash, cros_ec
2014-10-14 5:42 UTC (30+ messages)
` [U-Boot] [PATCH v4 01/29] sandbox: dts: Add a SPI device and cros_ec device
` [U-Boot] [PATCH v4 02/29] dm: core: Add functions for iterating through device children
` [U-Boot] [PATCH v4 03/29] dm: core: Allow parents to pass data to children during probe
` [U-Boot] [PATCH v4 04/29] dm: core: Add a clarifying comment on struct udevice's seq member
` [U-Boot] [PATCH v4 05/29] dm: spi: Add a uclass for SPI
` [U-Boot] [PATCH v4 06/29] dm: sandbox: Add a SPI emulation uclass
` [U-Boot] [PATCH v4 07/29] dm: Remove spi_init() from board_r.c when using driver model
` [U-Boot] [PATCH v4 08/29] dm: Add spi.h header to a few files
` [U-Boot] [PATCH v4 09/29] dm: spi: Adjust cmd_spi to work with driver model
` [U-Boot] [PATCH v4 10/29] dm: sandbox: spi: Move to "
` [U-Boot] [PATCH v4 11/29] dm: spi: Rename soft_spi.c to soft_spi_legacy.c
` [U-Boot] [PATCH v4 12/29] dm: spi: Remove SPI_INIT feature
` [U-Boot] [PATCH v4 13/29] dm: spi: Add soft_spi implementation
` [U-Boot] [PATCH v4 14/29] dm: exynos: Convert SPI to driver model
` [U-Boot] [PATCH v4 15/29] dm: spi: Add documentation on how to convert over SPI drivers
` [U-Boot] [PATCH v4 16/29] exynos: universal_c210: Move to driver model soft_spi
` [U-Boot] [PATCH v4 17/29] sf: Tidy up public and private header files
` [U-Boot] [PATCH v4 18/29] spi: Use error return value in sf_ops
` [U-Boot] [PATCH v4 19/29] dm: sf: Add a uclass for SPI flash
` [U-Boot] [PATCH v4 20/29] dm: Convert spi_flash_probe() and 'sf probe' to use driver model
` [U-Boot] [PATCH v4 21/29] dm: sf: sandbox: Convert SPI flash driver to "
` [U-Boot] [PATCH v4 22/29] dm: exynos: config: Use driver model for SPI flash
` [U-Boot] [PATCH v4 23/29] dm: spi: Add tests
` [U-Boot] [PATCH v4 24/29] dm: sf: Add tests for SPI flash
` [U-Boot] [PATCH v4 25/29] dm: tegra: dts: Add aliases for spi on tegra30 boards
` [U-Boot] [PATCH v4 26/29] dm: tegra: spi: Convert to driver model
` [U-Boot] [PATCH v4 27/29] dm: cros_ec: Add support for "
` [U-Boot] [PATCH v4 28/29] dm: sandbox: cros_ec: Move sandbox cros_ec to driver module
` [U-Boot] [PATCH v4 29/29] dm: exynos: cros_ec: Move cros_ec_spi to driver model
[U-Boot] [PATCH 0/6] Addition of new board Peach-Pi
2014-10-14 5:10 UTC
[U-Boot] [PATCH v8 0/12] Enable driver model for GPIOs on Tegra and Exynos
2014-10-14 5:04 UTC (3+ messages)
[U-Boot] [PATCH 0/6] Addition of new board Peach-Pi
2014-10-14 4:22 UTC
[U-Boot] [PATCH 0/4] Deep sleep patches for Freescale QorIQ platforms
2014-10-14 2:30 UTC (4+ messages)
[U-Boot] [PATCH 1/2] imx: mx6sl: Add IOMUX setting for USDHC1-3
2014-10-13 15:34 UTC (3+ messages)
` [U-Boot] [PATCH 2/2] imx: mx6slevk: Add support for USDHC1 and USDHC3 slots
[U-Boot] [PATCH 1/2] mmc: fsl_esdhc: Update esdhc driver for iMX6SX
2014-10-13 14:30 UTC (2+ messages)
[U-Boot] [PATCH fix for v2014.10] sunxi: axp152: dcdc3 scale is 50mV / step
2014-10-13 13:02 UTC (3+ messages)
` [U-Boot] [PATCH fix for v2014.10] sunxi: axp152: dcdc3 scale is 50mV / step not 25mV "
[U-Boot] [PATCH v2] imx: mx6 sabreauto: Add board support for USB EHCI
2014-10-13 12:59 UTC (2+ messages)
[U-Boot] [PATCH 0/9] ARM: sunxi: Add Allwinner A23 (sun8i) support
2014-10-13 12:57 UTC (28+ messages)
` [U-Boot] [PATCH 1/9] ARM: sunxi: Fix build break when CONFIG_MMC is not defined
` [U-Boot] [PATCH 2/9] ARM: sunxi: Add sun8i (A23) UART0 pin mux support
` [U-Boot] [PATCH 3/9] ARM: sunxi: Add support for uart0 on port F (mmc0)
` [U-Boot] [PATCH 4/9] mmc: sunxi: Add support for sun8i (A23)
` [U-Boot] [PATCH 5/9] ARM: sunxi: Add basic A23 support
` [U-Boot] [PATCH 6/9] ARM: sunxi: Add support for R_PIO gpio banks
` [U-Boot] [PATCH 7/9] ARM: sunxi: Allow specifying module in prcm apb0 init function
` [U-Boot] [PATCH 8/9] ARM: sunxi: Add support for using R_UART as console
` [U-Boot] [PATCH 9/9] ARM: sunxi: Add Ippo-q8h-v5 A23 tablet board defconfig
[U-Boot] [PATCH v4 1/1] Enable Android Fastboot support on am335x_evm board
2014-10-13 11:08 UTC
[U-Boot] [PATCH] imx: mx6 sabreauto: Add board support for USB EHCI
2014-10-13 11:03 UTC (4+ messages)
[U-Boot] [PATCH 2/2] imx: mx6sxsabresd: Add board support for USDHC2 and USDHC3
2014-10-13 9:17 UTC
[U-Boot] [PATCH resend] kconfig: Fix compiler warning in menu.c
2014-10-13 9:01 UTC (6+ messages)
[U-Boot] [PATCH v3 0/6] sunxi: Enable second sdcard slot found on some boards
2014-10-13 7:00 UTC (12+ messages)
` [U-Boot] [PATCH v3 1/6] sunxi: Add mmc card-detect functionality
` [U-Boot] [PATCH v3 2/6] sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option
` [U-Boot] [PATCH v3 3/6] sunxi: When we've both mmc0 and mmc2, detect from which one we're booting
` [U-Boot] [PATCH v3 4/6] sunxi: Use PG3 - PG8 as io-pins for mmc1
` [U-Boot] [PATCH v3 5/6] sunxi: Enable second sdcard slot found on some boards
` [U-Boot] [PATCH v3 6/6] sunxi: Kconfig: Unify sunxi Kconfig code
[U-Boot] [RFC PATCH 0/12] RFC: dm: Add I2C support
2014-10-13 5:39 UTC (13+ messages)
` [U-Boot] [RFC PATCH 01/12] dm: core: Allow access to the device's driver_id data
` [U-Boot] [RFC PATCH 02/12] dm: core: Add functions to find parent and OF data
` [U-Boot] [RFC PATCH 03/12] dm: i2c: Add a uclass for I2C
` [U-Boot] [RFC PATCH 04/12] dm: i2c: Implement driver model support in the i2c command
` [U-Boot] [RFC PATCH 05/12] dm: i2c: Add I2C emulation driver for sandbox
` [U-Boot] [RFC PATCH 06/12] dm: i2c: Add a sandbox I2C driver
` [U-Boot] [RFC PATCH 07/12] dm: i2c: Add an I2C EEPROM simulator
` [U-Boot] [RFC PATCH 08/12] dm: i2c: config: Enable I2C for sandbox using driver model
` [U-Boot] [RFC PATCH 09/12] dm: i2c: dts: Add an I2C bus for sandbox
` [U-Boot] [RFC PATCH 10/12] dm: WIP: EEPROM driver
` [U-Boot] [RFC PATCH 11/12] dm: i2c: Add tests for I2C
` [U-Boot] [RFC PATCH 12/12] dm: i2c: tegra: Convert to driver model for I2C for seaboard
[U-Boot] [PATCH] novena: Fix ethernet PHY reset sequence
2014-10-12 16:00 UTC (2+ messages)
[U-Boot] [RFC PATCH] genboardscfg.py: use Python2 from default path
2014-10-12 15:46 UTC (2+ messages)
[U-Boot] [SoCFPGA] next steps
2014-10-12 15:06 UTC (11+ messages)
` [U-Boot] Discussion topics / issues
[U-Boot] New discussion proposal for u-boot summit: "switch malloc to succeed or die model, as glib does"
2014-10-12 10:40 UTC (3+ messages)
[U-Boot] [PATCH v2 0/5] sunxi: Enable second sdcard slot found on some boards
2014-10-12 9:20 UTC (12+ messages)
` [U-Boot] [PATCH v2 1/5] sunxi: Add mmc card-detect functionality
` [U-Boot] [PATCH v2 2/5] sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option
` [U-Boot] [PATCH v2 3/5] sunxi: When we've both mmc0 and mmc2, detect from which one we're booting
` [U-Boot] [PATCH v2 5/5] sunxi: Enable second sdcard slot found on some boards
[U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena
2014-10-12 6:33 UTC (10+ messages)
[U-Boot] [PATCH 0/3] ARM: sunxi: Fix reset support on sun6i/sun8i
2014-10-12 2:40 UTC (4+ messages)
` [U-Boot] [PATCH 3/3] ARM: sunxi: Fix reset command "
[U-Boot] [PATCH v4] ARM: mxs: tools: Add support for boot progress display flag
2014-10-12 0:54 UTC (2+ messages)
[U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2014-10-11 22:58 UTC (2+ messages)
[U-Boot] [PATCH] arm: mxs: Define bootscript env variable on m28evk
2014-10-11 22:00 UTC
[U-Boot] [PATCH 0/2] Introduce CONFIG_SUPPORT_SPL/TPL
2014-10-11 20:49 UTC (5+ messages)
` [U-Boot] [PATCH 2/2] kconfig: add CONFIG_SUPPORT_TPL
[U-Boot] [PULL] u-boot-socfpga/topic/arm/socfpga-20141010
2014-10-11 19:22 UTC (3+ messages)
[U-Boot] [PATCH v3 0/29] Introduce driver model support for SPI, SPI flash, cros_ec
2014-10-11 18:55 UTC (11+ messages)
` [U-Boot] [PATCH v3 05/29] dm: spi: Add a uclass for SPI
[U-Boot] [PATCH 01/10] video: Add S3C24xx framebuffer support
2014-10-11 16:42 UTC (10+ messages)
` [U-Boot] [PATCH 02/10] arm: s3c24xx: Fix incorrect CONFIG_SYS_S3C2410_NAND_HWECC name
` [U-Boot] [PATCH 03/10] mtd: nand: s3c: Fix data type width in debug()
` [U-Boot] [PATCH 04/10] mtd: nand: s3c: Unify the register definition and naming
` [U-Boot] [PATCH 05/10] mtd: nand: s3c: Add S3C2440 specifics
` [U-Boot] [PATCH 06/10] mtd: nand: s3c: Add S3C2440 buffer reading
` [U-Boot] [PATCH 07/10] mtd: nand: s3c: Add missing correction and select_chip functions
` [U-Boot] [PATCH 08/10] i2c: s3c: Implant support for S3C2440
` [U-Boot] [PATCH 09/10] gpio: s3c: Fix the GPIO driver
` [U-Boot] [PATCH 10/10] net: smc911x: Keep MAC programmed
[U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands
2014-10-11 16:22 UTC (4+ messages)
[U-Boot] [PATCH 0/8] PSCI v0.2 framework for ARMv8
2014-10-11 16:04 UTC (7+ messages)
` [U-Boot] [PATCH 4/8] ARMv8: PSCI: Add linker section to hold PSCI code
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox