public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
 messages from 2014-10-30 21:06:55 to 2014-11-01 15:12:37 UTC [more...]

[U-Boot] [PATCH 1/6] dlmalloc: ensure gd is set for early alloc
 2014-11-01 15:12 UTC  (12+ messages)
` [U-Boot] [PATCH 2/6] sandbox: init cli for -c
` [U-Boot] [PATCH 3/6] hush: return consistent codes from run_command()
` [U-Boot] [PATCH 4/6] hush: fix segfault on syntax error
` [U-Boot] [PATCH 5/6] hush: make run_command() return an error on parsing failure
` [U-Boot] [PATCH 6/6] hush: add some tests for quoting

[U-Boot] [PATCH v3 0/6] dm: Introduce driver model for sunxi
 2014-11-01 15:11 UTC  (10+ messages)
` [U-Boot] [PATCH v3 1/6] dm: sunxi: dts: Add sun7i device tree files
` [U-Boot] [PATCH v3 2/6] dm: sunxi: Add a new config for an FDT-based pcDuino3
` [U-Boot] [PATCH v3 3/6] dm: sunxi: Add pinmux functions which take a bank parameter
` [U-Boot] [PATCH v3 4/6] dm: sunxi: Make sure that GPIOs are requested
` [U-Boot] [PATCH v3 5/6] dm: sunxi: Modify the GPIO driver to support driver model
` [U-Boot] [PATCH v3 6/6] dm: sunxi: Add support for serial using "

[U-Boot] [PATCH 1/2] imx:mx6sl_pins add pad settings for usb
 2014-11-01 14:31 UTC  (3+ messages)
` [U-Boot] [PATCH 2/2] arm:imx-common add function prototype for gpr set

[U-Boot] [PATCH 0/5] add usb support for mx6 board
 2014-11-01 13:45 UTC  (12+ messages)
` [U-Boot] [PATCH 1/5] imx:mx6sxsabresd add usb support
` [U-Boot] [PATCH 2/5] imx:mx6slevk "
` [U-Boot] [PATCH 3/5] arm:imx-common introduce a new function to set gpr
` [U-Boot] [PATCH 4/5] imx:mx6qarm2 add usb support
` [U-Boot] [PATCH 5/5] imx:mx6sabresd "

[U-Boot] [PATCH] power: LP8720 regulator support
 2014-11-01 11:01 UTC  (2+ messages)

[U-Boot] [PATCH v3 0/2] mmc: Board-specific MMC power initializations
 2014-11-01 10:52 UTC  (3+ messages)
` [U-Boot] [PATCH v3 1/2] "
` [U-Boot] [PATCH v3 2/2] omap_hsmmc: Board-specific TWL4030 "

[U-Boot] [PATCH] omap_hsmmc: Allow for board-specific MMC power init
 2014-11-01 10:35 UTC  (3+ messages)
` [U-Boot] [PATCH v2 1/2] mmc: Board-specific MMC power initializations
  ` [U-Boot] [PATCH v2 2/2] omap_hsmmc: Board-specific TWL4030 "

[U-Boot] Need FTP client support in U-Boot
 2014-11-01 10:10 UTC  (7+ messages)

[U-Boot] [PATCH v2 12/12] sf: Give proper spacing between flash table params
 2014-11-01  8:55 UTC 

[U-Boot] [PATCH v2 11/12] sf: Update Winbond flash params
 2014-11-01  8:55 UTC 

[U-Boot] [PATCH v2 10/12] sf: Update Micron flash params
 2014-11-01  8:55 UTC 

[U-Boot] [PATCH v2 09/12] sf: Update Spansion flash params
 2014-11-01  8:55 UTC 

[U-Boot] [PATCH v2 08/12] sf: Update Macronix flash params
 2014-11-01  8:54 UTC 

[U-Boot] [PATCH v2 07/12] sf: Update GigaDevice flash params
 2014-11-01  8:54 UTC 

[U-Boot] [PATCH v2 06/12] sf: Update EON flash params
 2014-11-01  8:54 UTC 

[U-Boot] [PATCH v2 05/12] sf: Update Atmel flash params
 2014-11-01  8:54 UTC 

[U-Boot] [PATCH v2 04/12] sf: Update SST flash params
 2014-11-01  8:54 UTC 

[U-Boot] [PATCH v2 03/12] spi: sf: Support byte program for sst spi flash
 2014-11-01  8:53 UTC 

[U-Boot] [PATCH v2 02/12] spi/ich.c: Set the rx operation mode for ich 7
 2014-11-01  8:53 UTC 

[U-Boot] [PATCH v2 01/12] spi/ich.c: Fix a bug of reading from a non-64 bytes aligned address
 2014-11-01  8:53 UTC 

[U-Boot] [PATCH v2 00/12] spi: sf: ICH SPI driver fix and flash params update
 2014-11-01  8:53 UTC 

[U-Boot] [PATCH] powerpc/t1040qds: Add support of SD boot for T1040QDS Board
 2014-11-01  7:31 UTC 

[U-Boot] [PATCH] blackfin: rename blackfin i2c driver to adi
 2014-11-01  6:08 UTC  (4+ messages)

[U-Boot] [RFC PATCH v1 0/2] kgdb:add breakpoint and arm support
 2014-11-01  5:12 UTC  (3+ messages)
` [U-Boot] [RFC PATCH v1 1/2] kgdb: add breakpoint support
` [U-Boot] [RFC PATCH v1 2/2] arm:kgdb add KGDB support for arm platform

[U-Boot] [PATCH] imx:mx6sxsabresd fix pfuz probe failed
 2014-11-01  0:16 UTC  (5+ messages)

[U-Boot] [PATCH v5] fs: fat/ext4/sandbox - Deal with files greater than 2GB
 2014-10-31 22:40 UTC  (3+ messages)

[U-Boot] [GIT PULL] u-boot-mips/master
 2014-10-31 18:50 UTC 

[U-Boot] [off-topic] LinuxCon/ELCE 2014 presentation on "Redundant booting with U-Boot"
 2014-10-31 16:54 UTC  (3+ messages)

[U-Boot] [PATCH 1/2] sunxi: Request card detect gpio
 2014-10-31 16:23 UTC  (2+ messages)
` [U-Boot] [PATCH 2/2] sunxi: Request USB vbus gpio

[U-Boot] [PATCH] fs: make it possible to read the filesystem UUID
 2014-10-31 15:08 UTC 

[U-Boot] [PATCH v2 00/10] ARM: sunxi: Add basic support for Allwinner A31 (sun6i)
 2014-10-31 15:03 UTC  (4+ messages)
` [U-Boot] [PATCH v2 06/10] ARM: sunxi-mmc: Add mmc support for sun6i / A31

[U-Boot] [PATCH] MAINTAINERS: CFI flash maintainership only includes the CFI related files
 2014-10-31 14:01 UTC  (2+ messages)

[U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD
 2014-10-31 12:49 UTC  (7+ messages)

[U-Boot] [v3 PATCH 0/12] arm, at91, spl: add spl support for the taurus and corvus boards
 2014-10-31 12:31 UTC  (18+ messages)
` [U-Boot] [v3 PATCH 01/12] spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header
` [U-Boot] [v3 PATCH 02/12] arm, at91: add spi dataflash support for the taurus board
` [U-Boot] [v3 PATCH 03/12] arm, at91, mpddrc: fix typo in ddr2_init()
` [U-Boot] [v3 PATCH 04/12] arm, at91: compile mpddrc ram init code also for AT91SAM9M10G45
` [U-Boot] [v3 PATCH 05/12] arm, at91: add missing ddr2 cr register MPDDRC_CR_EBISHARE define
` [U-Boot] [v3 PATCH 06/12] spl, nand: add option to boot raw u-boot.bin image only
` [U-Boot] [v3 PATCH 07/12] mtd: atmel_nand: add missign include
` [U-Boot] [v3 PATCH 08/12] spl, nand, atmel_nand: add erase one block function
` [U-Boot] [v3 PATCH 09/12] spl, mtd, nand, atmel_nand: invert device ready pin logic
` [U-Boot] [v3 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support
` [U-Boot] [v3 PATCH 11/12] arm, at91, spl: add spl support for the taurus board
` [U-Boot] [v3 PATCH 12/12] arm, spl, at91: add spl support for the corvus board

[U-Boot] [PATCH v2 0/4] Adds support for Exynos5422 odroid xu3 board
 2014-10-31 12:14 UTC  (5+ messages)
` [U-Boot] [PATCH v2 1/4] exynos5: fix GPIO information of exynos5420
` [U-Boot] [PATCH v2 2/4] Exynos5800: Add support for Exynos5800
` [U-Boot] [PATCH v2 3/4] odroid: make some macros common
` [U-Boot] [PATCH v2 4/4] Odroid-XU3: Add support for Odroid-XU3

[U-Boot] [PATCH 0/4] Adds support for Exynos5422 odroid xu3 board
 2014-10-31 12:08 UTC  (5+ messages)
` [U-Boot] [PATCH 1/4] exynos5: fix GPIO information of exynos5420
` [U-Boot] [PATCH 2/4] Exynos5800: Add support for Exynos5800
` [U-Boot] [PATCH 3/4] odroid: make some macros common
` [U-Boot] [PATCH 4/4] Odroid-XU3: Add support for Odroid-XU3

[U-Boot] [PATCH v2] mtd, cfi, ubi: add missing writebufsize initialization
 2014-10-31 10:29 UTC 

[U-Boot] [PATCH v2] powerpc/t208xqds: VID support
 2014-10-31 10:06 UTC 

[U-Boot] mtd, ubi: errormessage handling
 2014-10-31 10:03 UTC 

[U-Boot] [PATCH v3 0/7] Addition of new board Peach-Pi
 2014-10-31  9:57 UTC  (9+ messages)
` [U-Boot] [PATCH v3 1/7] Exynos5800: Introduce new proid for Exynos5800
` [U-Boot] [PATCH v3 2/7] Exynos5800: Add DTS for new board Peach-Pi
` [U-Boot] [PATCH v3 3/7] Config: Exynos5800: Enable build for Peach-Pi
` [U-Boot] [PATCH v3 4/7] DMC: Exynos5: Enable update mode for DREX controller
` [U-Boot] [PATCH v3 5/7] Config: Exynos5420: Refactor SDRAM Bank and Size
` [U-Boot] [PATCH v3 6/7] Exynos5: ddr3: Choose between single or double channel config
` [U-Boot] [PATCH v3 7/7] Peach-Pi: Use the enhanced usb_copy() prototype

[U-Boot] [PATCH 1/3] exynos5: fix GPIO information of exynos5420
 2014-10-31  9:56 UTC  (5+ messages)
  ` [U-Boot] [PATCH 2/3] Exynos5422: Add support for Exynos5422
  ` [U-Boot] [PATCH 3/3] Odroid-XU3: Add support for Odroid-XU3

[U-Boot] [PATCH v2 0/6] dm: Introduce driver model for sunxi
 2014-10-31  9:55 UTC  (14+ messages)
` [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model

[U-Boot] [PATCH] mtd, cfi, ubi: add missing writebufsize initialization
 2014-10-31  9:45 UTC  (3+ messages)

[U-Boot] [PATCH] arm: socfpga: Add example config entry for EPCS/EPCQ SPI
 2014-10-31  9:19 UTC  (7+ messages)

[U-Boot] [PATCH v2 0/6] Addition of new board Peach-Pi
 2014-10-31  8:52 UTC 

[U-Boot] [PATCH 1/3] exynos5: fix GPIO information of exynos5420
 2014-10-31  8:41 UTC  (3+ messages)
` [U-Boot] [PATCH 2/3] Exynos5800: Add support for Exynos5800
` [U-Boot] [PATCH 3/3] Odroid-XU3: Add support for Odroid-XU3

[U-Boot] Flat Image Tree and boot arguments
 2014-10-31  8:05 UTC  (3+ messages)

[U-Boot] [PATCH v4 0/29] Introduce driver model support for SPI, SPI flash, cros_ec
 2014-10-31  8:01 UTC  (7+ messages)
` [U-Boot] [PATCH v4 05/29] dm: spi: Add a uclass for SPI

[U-Boot] DECLARE_GLOBAL_DATA_PTR : move from source to Makefile
 2014-10-31  7:57 UTC  (3+ messages)

[U-Boot] [PATCH 1/3] arm: rmobile: alt: Fix typo of SCIF id
 2014-10-31  7:30 UTC  (3+ messages)
` [U-Boot] [PATCH 2/3] arm: rmobile: alt: Add support USB and USB commands
` [U-Boot] [PATCH 3/3] arm: rmobile: alt: Add VFAT filesystem support

[U-Boot] [PATCH 1/6] arm: rmobile: lager: Add external RAM boot
 2014-10-31  7:16 UTC  (6+ messages)
` [U-Boot] [PATCH 2/6] arm: rmobile: koelsch: "
` [U-Boot] [PATCH 3/6] arm: rmobile: alt: "
` [U-Boot] [PATCH 4/6] arm: rmobile: lager: Remove RAM address initialization
` [U-Boot] [PATCH 5/6] arm: rmobile: koelsch: "
` [U-Boot] [PATCH 6/6] arm: rmobile: alt: "

[U-Boot] [PATCH] arm: rmobile: lager: Fix change of the CPU frequency
 2014-10-31  7:08 UTC 

[U-Boot] [PATCH] arm: rmobile: r8a7790: Update initialize L2 cache
 2014-10-31  7:07 UTC 

[U-Boot] [PATCH 0/2] Follow-up patches for commit 2e07c249a67e (kconfig: arm: introduce symbol for ARM CPUs)
 2014-10-31  6:59 UTC  (4+ messages)
` [U-Boot] [PATCH 1/2] kconfig: arm: select CPU_V7 for some new boards
` [U-Boot] [PATCH 2/2] kconfig: arm: move "armv8" define to arch/arm/Kconfig

[U-Boot] verified boot of beaglebone black
 2014-10-31  6:59 UTC  (7+ messages)

[U-Boot] [PATCH 3/3] ARM: kwimage: fix v0 format
 2014-10-31  6:56 UTC  (3+ messages)

[U-Boot] [BUG] kwimage v0 broken
 2014-10-31  6:54 UTC  (6+ messages)

[U-Boot] [v2 PATCH 0/12] arm, at91, spl: add spl support for the taurus and corvus boards
 2014-10-31  6:08 UTC  (15+ messages)
` [U-Boot] [v2 PATCH 03/12] arm, at91, mpddrc: fix typo in ddr2_init()
` [U-Boot] [v2 PATCH 08/12] spl, nand, atmel_nand: add erase one block function
` [U-Boot] [v2 PATCH 09/12] spl, mtd, nand, atmel_nand: invert device ready pin logic
` [U-Boot] [v2 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support

[U-Boot] [PATCH] arm: ls102xa: Update PCIe dts node status
 2014-10-31  5:43 UTC 

[U-Boot] [PATCH] powerpc/t208xqds: VID support
 2014-10-31  3:52 UTC 

[U-Boot] [PATCH 02/10] Add some standard headers external code might need
 2014-10-31  2:43 UTC  (4+ messages)

[U-Boot] [PATCH v2] kbuild: do not hide clang warnings during build with W=1
 2014-10-31  2:00 UTC 

[U-Boot] [PATCH v4] powerpc/mpc85xx: modify erratum A007186
 2014-10-31  1:34 UTC  (3+ messages)

[U-Boot] Pull request: u-boot-staging
 2014-10-31  0:02 UTC 

[U-Boot] [PATCH] Remove the CREDITS file
 2014-10-30 23:52 UTC  (2+ messages)

[U-Boot] [PATCH] novena: Add MAINTAINERS file
 2014-10-30 23:48 UTC  (2+ messages)

[U-Boot] [PATCH] ppc/arm: remove remainders of dead boards in Kconfig
 2014-10-30 23:44 UTC  (2+ messages)

[U-Boot] [PATCH] Remove unused files
 2014-10-30 23:43 UTC  (2+ messages)

[U-Boot] [PATCH] twl4030: TWL4030 VMMC2 3.2V enable on MMC init
 2014-10-30 23:35 UTC  (3+ messages)
` [U-Boot] [PATCH v2] twl4030: "

[U-Boot] [PATCH 0/2] Fix u-boot compile on darwin host
 2014-10-30 23:27 UTC  (4+ messages)
` [U-Boot] [PATCH 2/2] tools/kwbimage.c: fix build on darwin

[U-Boot] [PATCH v2] tools/kwbimage: Fix compilation warning
 2014-10-30 22:16 UTC  (2+ messages)

[U-Boot] [PATCH 1/2] arm: mx6: add support for TBS2910 Matrix ARM miniPC
 2014-10-30 21:06 UTC  (4+ messages)
` [U-Boot] [PATCH v2 1/3] arm: arch-mx6: typo fixes in crm_regs.h
  ` [U-Boot] [PATCH v2 3/3] video: speedup writing strings to fb console


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox