messages from 2014-11-07 15:28:10 to 2014-11-10 07:16:58 UTC [more...]
[U-Boot] [RFC PATCH 0/12] RFC: dm: Add I2C support
2014-11-10 7:16 UTC (6+ messages)
` [U-Boot] [RFC PATCH 03/12] dm: i2c: Add a uclass for I2C
` [U-Boot] [RFC PATCH 04/12] dm: i2c: Implement driver model support in the i2c command
[U-Boot] [PATCH 0/39] x86: Add support for running on bare hardware
2014-11-10 6:49 UTC (42+ messages)
` [U-Boot] [PATCH 06/39] x86: config: Move common x86 configs to a common file
` [U-Boot] [PATCH 08/39] x86: Remove REALMODE_BASE which is no longer used
` [U-Boot] [PATCH 09/39] x86: Remove board_init16() call which is not used
` [U-Boot] [PATCH 11/39] x86: Invalidate TLB as early as possible
` [U-Boot] [PATCH 12/39] x86: Tidy up global descriptor table setup
` [U-Boot] [PATCH 13/39] x86: Use the standard dram_init() function
` [U-Boot] [PATCH 14/39] x86: Use the standard arch_cpu_init() function
` [U-Boot] [PATCH 16/39] x86: Fix up some missing prototypes
` [U-Boot] [PATCH 17/39] x86: Add chromebook_link board
` [U-Boot] [PATCH 18/39] x86: Save the BIST value on reset
` [U-Boot] [PATCH 19/39] x86: Build a .rom file which can be flashed to an x86 machine
` [U-Boot] [PATCH 31/39] x86: ivybridge: Check BIST value on boot
` [U-Boot] [PATCH 32/39] x86: ivybridge: Perform Intel microcode update "
` [U-Boot] [PATCH 33/39] RFC: x86: dts: Add microcode updates for ivybridge CPU
` [U-Boot] [PATCH 39/39] x86: ivybridge: Implement SDRAM init
[U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD
2014-11-10 6:38 UTC (2+ messages)
[U-Boot] [PATCH] arm: rmobile: alt: Change clock of SCIF to external clock
2014-11-10 5:43 UTC
[U-Boot] Pull request: u-boot-blackfin
2014-11-10 4:42 UTC
[U-Boot] [PATCH v6 0/3] Adds support for Exynos5422 odroid xu3 board
2014-11-10 1:41 UTC (4+ messages)
` [U-Boot] [PATCH v6 1/3] exynos5: fix GPIO information of exynos5420
` [U-Boot] [PATCH v6 2/3] Odroid-XU3: Add support for Odroid-XU3
` [U-Boot] [PATCH v6 3/3] Odroid-XU3: Add documentation "
[U-Boot] [PATCH v3 0/3] Add board level usb supporrt for mxsxsabresd and mx6slevk
2014-11-10 1:01 UTC (8+ messages)
` [U-Boot] [PATCH v3 1/3] usb:ehci-mx6 add board_usb_phy_mode function
[U-Boot] [PATCH v4 0/3] Add board level usb support for mxsxsabresd and mx6slevk
2014-11-10 0:50 UTC (4+ messages)
` [U-Boot] [PATCH v4 1/3] usb:ehci-mx6 add phy mode query function
` [U-Boot] [PATCH v4 2/3] imx:mx6sxsabresd add board level support for usb
` [U-Boot] [PATCH 3/3] imx:mx6slevk "
[U-Boot] [PATCH v2 0/8] *** iMX6 SabreSD SPL Support ***
2014-11-10 0:35 UTC (15+ messages)
` [U-Boot] [PATCH v2 1/8] mmc: add spl_board_mmc_init
` [U-Boot] [PATCH v2 2/8] mmc: imx6: call spl_board_mmc_init
` [U-Boot] [PATCH v2 3/8] imx6: add spl on board configuration
` [U-Boot] [PATCH v2 4/8] imx6: add some flexibility for defining macros
` [U-Boot] [PATCH v2 5/8] imx6: add spl on board configuration
` [U-Boot] [PATCH v2 6/8] imx6: SPL support for iMX6 SabreSD
` [U-Boot] [PATCH v2 7/8] imx6: add data configuration file for SPL
` [U-Boot] [PATCH v2 8/8] kconfig: imx6: add SUPPORT_SPL
[U-Boot] [PATCH 0/7] *** iMX6SL-evk SPL Support ***
2014-11-10 0:33 UTC (14+ messages)
` [U-Boot] [PATCH 1/7] imx6: add macro define inclusion
` [U-Boot] [PATCH 2/7] imx6sl: update DCD configuration file
` [U-Boot] [PATCH 3/7] imx6sl: add spl on board configuration
` [U-Boot] [PATCH 4/7] imx6: add additional flexibility for defining macros
` [U-Boot] [PATCH 5/7] imx6sl: add spl in include header file
` [U-Boot] [PATCH 6/7] imx6sl: add SPL support for iMX6SL-evk
` [U-Boot] [PATCH 7/7] kconfig: imx6sl: add add SUPPORT_SPL
[U-Boot] [PATCH] arm: rmobile: alt: Change clock of SCIF to external clock
2014-11-10 0:24 UTC
[U-Boot] [PATCH] arm: rmobile: kconfig: Remove '+S:' prefix from defconfig files
2014-11-10 0:23 UTC
[U-Boot] [PATCH v3 0/8] *** iMX6 SabreSD SPL Support ***
2014-11-10 0:23 UTC (15+ messages)
` [U-Boot] [PATCH v3 1/8] mmc: add spl_board_mmc_init
` [U-Boot] [PATCH v3 2/8] mmc: imx6: call spl_board_mmc_init
` [U-Boot] [PATCH v3 3/8] imx6: add spl on include header file
` [U-Boot] [PATCH v3 4/8] imx6: add some flexibility for defining macros
` [U-Boot] [PATCH v3 5/8] imx6: add spl on board configuration
` [U-Boot] [PATCH v3 6/8] imx6: add data configuration file for SPL
` [U-Boot] [PATCH v3 7/8] imx6: SPL support for iMX6 SabreSD
` [U-Boot] [PATCH v3 8/8] kconfig: imx6: add SUPPORT_SPL
[U-Boot] [PATCH 1/3] arm: rmobile: alt: Enable channel 1 of sh-i2c
2014-11-10 0:16 UTC (3+ messages)
` [U-Boot] [PATCH 2/3] arm: rmobile: alt: Fix typo in comment for sh-i2c
` [U-Boot] [PATCH 3/3] arm: rmobile: alt: Remove i2c_init function
[U-Boot] verified boot of beaglebone black
2014-11-10 0:13 UTC (13+ messages)
[U-Boot] [PATCH 0/9] cppcheck cleanup
2014-11-09 23:52 UTC (3+ messages)
` [U-Boot] [PATCH 7/9] board/renesas/ecovec/ecovec.c: fix buffer overflow
[U-Boot] [PATCH v2 4/4] x86: Save TSC frequency in the global data
2014-11-09 14:19 UTC
[U-Boot] [PATCH v2 3/4] x86: Add quick TSC calibration via PIT
2014-11-09 14:19 UTC
[U-Boot] [PATCH v2 2/4] x86: Do TSC MSR calibration only for known/supported CPUs
2014-11-09 14:19 UTC
[U-Boot] [PATCH v2 1/4] x86: Do CPU identification in the early phase
2014-11-09 14:18 UTC
[U-Boot] [PATCH v3 0/3] exynos config updates
2014-11-09 10:44 UTC (4+ messages)
` [U-Boot] [PATCH v3 1/3] exynos: Enable config_distro_defaults.h
` [U-Boot] [PATCH v3 2/3] exynos5: Use config_distro_bootcmd.h
` [U-Boot] [PATCH v3 3/3] exynos: Increase command line buffer size (CONFIG_SYS_CBSIZE)
[U-Boot] [PATCH 0/2] spl: MMC U-Boot image load from raw partition
2014-11-09 0:12 UTC (6+ messages)
` [U-Boot] [PATCH 1/2] MMC SD fs boot partition config coding style and proper description
` [U-Boot] [PATCH 2/2] spl: MMC U-Boot image load from raw partition
[U-Boot] [PATCH v4 0/3] mmc: Board-specific MMC power initializations
2014-11-08 21:29 UTC (5+ messages)
` [U-Boot] [PATCH v4 1/3] "
` [U-Boot] [PATCH v4 2/3] twl4030: device-index-specific MMC power initializations, common ramp-up delay
` [U-Boot] [PATCH v4 3/3] omap_hsmmc: Board-specific TWL4030 MMC power initializations
[U-Boot] [PATCH 0/10] x86: Add support for booting 64-bit uncompressed kernel images
2014-11-08 19:24 UTC (19+ messages)
` [U-Boot] [PATCH 01/10] x86: Move paging functions into cpu.c
` [U-Boot] [PATCH 02/10] x86: Bring in msr-index.h from linux 3.8
` [U-Boot] [PATCH 03/10] x86: Display basic CPU information on boot
` [U-Boot] [PATCH 04/10] x86: Add support for starting 64-bit kernel
` [U-Boot] [PATCH 05/10] x86: Move kernel boot function to arch/x86/lib/bootm.c
` [U-Boot] [PATCH 06/10] x86: image: Add new image type for x64_64
` [U-Boot] [PATCH 07/10] x86: bootm: Support booting a 64-bit raw kernel
` [U-Boot] [PATCH 08/10] x86: Correct a few progress message nits
` [U-Boot] [PATCH 10/10] x86: config: Increase CONFIG_SYS_BOOTM_LEN to 16MB
[U-Boot] [PATCH 1/4] x86: Display more detailed CPU information on boot
2014-11-08 18:54 UTC (6+ messages)
[U-Boot] [PATCH 0/8] *** iMX6 SabreSD SPL Support ***
2014-11-08 16:35 UTC (12+ messages)
` [U-Boot] [PATCH 1/8] kconfig: add SUPPORT_SPL
` [U-Boot] [PATCH 2/8] imx: add file in makefile
` [U-Boot] [PATCH 3/8] imx6: add spl on board configuration
` [U-Boot] [PATCH 4/8] imx6: add flexibility for defining stack address
` [U-Boot] [PATCH 5/8] mmc: imx: add spl_board_mmc_init
` [U-Boot] [PATCH 6/8] mx6: add SPL support in the header
` [U-Boot] [PATCH 7/8] imx: add configuration file for SPL
` [U-Boot] [PATCH 8/8] imx: SPL support for iMX6 SabreSD
[U-Boot] [U-Boot,v2] mpc85xx: inhibit bman portals by default
2014-11-08 16:28 UTC
[U-Boot] [PATCH] usb_storage: blacklist Enclosure Service Devices
2014-11-08 12:49 UTC
[U-Boot] [PATCH 0/4 v4] arm: socfpga: Add Cadence QSPI support
2014-11-08 12:18 UTC (12+ messages)
` [U-Boot] [PATCH 1/4 v4] spi: Add Cadence QSPI DM driver used by SoCFPGA
` [U-Boot] [PATCH 2/4 v4] arm: socfpga: dts: Add Cadence QSPI DT node to socfpga.dtsi
` [U-Boot] [PATCH 3/4 v4] arm: socfpga: dts: Add spi0 alias for Cadence QSPI driver
[U-Boot] [PATCH V4 1/3] usb: eth: fix Makefile
2014-11-08 11:31 UTC (5+ messages)
` [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER
` [U-Boot] [PATCH V4 3/3] usb: eth: enable AX88179 DRIVER for ARNDALE 5250
[U-Boot] [PATCH] usb_storage: skip all unknown devices when probing
2014-11-08 11:04 UTC (4+ messages)
` [U-Boot] [PATCH] usb_storage: blacklist Enclosure Service Devices
[U-Boot] [PATCH v3 0/11] sun6i: Add dram init and SPL support
2014-11-08 10:35 UTC (25+ messages)
` [U-Boot] [PATCH v3 01/11] sun6i: Add new p2wi controller driver
` [U-Boot] [PATCH v3 02/11] sun6i: Add basic axp221 driver
` [U-Boot] [PATCH v3 03/11] sun6i: Add clock functions needed for SPL / DRAM init
` [U-Boot] [PATCH v3 04/11] sun6i: Add cpucfg register definitions
` [U-Boot] [PATCH v3 05/11] sun4i: Rename dram files to dram_sun4i.x
` [U-Boot] [PATCH v3 06/11] sun6i: Add dram initialization code
` [U-Boot] [PATCH v3 07/11] sun6i: Poke magic sram controller register to avoid cache issues
` [U-Boot] [PATCH v3 08/11] sun6i: Enable SPL
` [U-Boot] [PATCH v3 09/11] sun6i: Add Mele M9 board
` [U-Boot] [PATCH v3 10/11] sunxi: ehci: Add proper Kconfig options to select the usb Vbus gpio-s
` [U-Boot] [PATCH v3 11/11] sun6i: ehci: Add sun6i ehci support
[U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support
2014-11-08 8:31 UTC (7+ messages)
` [U-Boot] [PATCH v2 32/40] ARM: cache_v7: Various minor cleanups
` [U-Boot] [PATCH v2 33/40] ARM: cache-cp15: Use more accurate types
` [U-Boot] [PATCH v2 34/40] malloc: Output region when debugging
[U-Boot] [PATCH] broadcom: add seven boards
2014-11-08 8:25 UTC (2+ messages)
[U-Boot] [PATCH 0/8] PSCI v0.2 framework for ARMv8
2014-11-08 8:11 UTC (4+ messages)
` [U-Boot] [PATCH 1/8] ARM: PSCI: Update psci.h for psci v0.2
` [U-Boot] [PATCH 1/8] ARM: PSCI: Update psci.h for psci v0.2 -- CORRECTION
[U-Boot] Pull request: u-boot-arm/master
2014-11-08 0:07 UTC
[U-Boot] [PATCH] test: ums: Add sleep before unmount directory
2014-11-07 23:03 UTC (9+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] mpc85xx: inhibit bman portals by default
2014-11-07 20:52 UTC
[U-Boot] [PATCH] driver/ddr/fsl: Adjust timing_cfg_0 to better support two DDR slots
2014-11-07 20:14 UTC
[U-Boot] [PATCH 0/6] arm: socfpga: Add Designware SPI support
2014-11-07 18:01 UTC (3+ messages)
` [U-Boot] [PATCH 3/6] spi: Add designware master SPI DM driver used on SoCFPGA
[U-Boot] Fwd: verifying & signing
2014-11-07 17:38 UTC (8+ messages)
` [U-Boot] "
[U-Boot] [PATCH] exynos: dts: Correct USB vbus-gpio numbering for Snow
2014-11-07 17:06 UTC (2+ messages)
[U-Boot] uboot uImage binary does not boot in Qemu
2014-11-07 16:28 UTC (2+ messages)
[U-Boot] [PATCH v1 0/6] Update gdsys board support
2014-11-07 16:19 UTC (5+ messages)
[U-Boot] [PATCH 1/5] usb: s3c-otg: Remove useless include
2014-11-07 15:37 UTC (13+ messages)
` [U-Boot] [PATCH 5/5] arm: socfpga: Add example UDC config
` [U-Boot] [PATCH 4/5] usb: s3c-otg: Allow custom gusbcfg
` [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox