public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
 messages from 2014-11-12 09:07:49 to 2014-11-13 07:30:53 UTC [more...]

[U-Boot] [PATCH 1/3 v2] blackfin: rename bfin-twi_i2c driver to adi_i2c
 2014-11-13  7:30 UTC 

[U-Boot] [PATCH v3 0/26] x86: Add support for running on bare hardware
 2014-11-13  7:06 UTC  (33+ messages)
` [U-Boot] [PATCH v3 01/26] x86: Allow timer calibration to work on ivybridge
` [U-Boot] [PATCH v3 02/26] x86: Drop old CONFIG_INTEL_CORE_ARCH code
` [U-Boot] [PATCH v3 03/26] x96: ifdtool: Allow creation of an empty ROM
` [U-Boot] [PATCH v3 04/26] x86: Add chromebook_link board
` [U-Boot] [PATCH v3 05/26] x86: Build a .rom file which can be flashed to an x86 machine
` [U-Boot] [PATCH v3 06/26] x86: Emit post codes in startup code for Chromebooks
` [U-Boot] [PATCH v3 07/26] x86: chromebook_link: Implement CAR support (cache as RAM)
` [U-Boot] [PATCH v3 08/26] x86: Refactor PCI to permit alternate init
` [U-Boot] [PATCH v3 09/26] x86: Support use of PCI before relocation
` [U-Boot] [PATCH v3 10/26] x86: ivybridge: Enable PCI in early init
` [U-Boot] [PATCH v3 11/26] x86: pci: Allow configuration before relocation
` [U-Boot] [PATCH v3 12/26] x86: ivybridge: Add early LPC init so that serial works
` [U-Boot] [PATCH v3 13/26] x86: Tidy up coreboot header usage
` [U-Boot] [PATCH v3 14/26] x86: Add clr/setbits functions
` [U-Boot] [PATCH v3 15/26] x86: Add msr read/write functions that use a structure
` [U-Boot] [PATCH v3 16/26] x86: ivybridge: Perform initial CPU setup
` [U-Boot] [PATCH v3 17/26] x86: ivybridge: Check BIST value on boot
` [U-Boot] [PATCH v3 18/26] x86: ivybridge: Perform Intel microcode update "
` [U-Boot] [PATCH v3 19/26] x86: dts: Add microcode updates for ivybridge CPU
` [U-Boot] [PATCH v3 20/26] x86: ivybridge: Add early init for PCH devices
` [U-Boot] [PATCH v3 21/26] x86: ivybridge: Add support for early GPIO init
` [U-Boot] [PATCH v3 22/26] x86: chromebook_link: Enable GPIO support
` [U-Boot] [PATCH v3 23/26] x86: Make show_boot_progress() common
` [U-Boot] [PATCH v3 24/26] x86: ivybridge: Add LAPIC support
` [U-Boot] [PATCH v3 25/26] x86: ivybridge: Implement SDRAM init
` [U-Boot] [PATCH v3 26/26] x86: Rename chromebook-x86 to coreboot

[U-Boot] [PATCH 1/2] blackfin: spi: move spi max chip select to spi.h
 2014-11-13  6:53 UTC  (4+ messages)
` [U-Boot] [PATCH 2/2] spi: add common spi3 controller driver

[U-Boot] [PATCH v2] spl: Change debug to printf for "Unsupported boot-device"
 2014-11-13  6:52 UTC  (2+ messages)

[U-Boot] [PATCH v3 0/5] ls102xa: HYP/non-sec: for ls102xa
 2014-11-13  6:15 UTC  (2+ messages)

[U-Boot] [PATCH v2 0/4] ls102xa: HYP/non-sec: for ls102xa
 2014-11-13  6:09 UTC  (4+ messages)
` [U-Boot] [PATCH v2 4/4] ARM: ls102xa: allow all the peripheral access permissions as R/W

[U-Boot] [PATCH] km_arm: convert the km_arm boards to the generic board support
 2014-11-13  6:03 UTC  (2+ messages)

[U-Boot] [PATCH v7 0/3] Adds support for Exynos5422 odroid xu3 board
 2014-11-13  5:55 UTC  (5+ messages)
` [U-Boot] [PATCH v7 1/3] exynos5: fix GPIO information of exynos5420
` [U-Boot] [PATCH v7 2/3] Odroid-XU3: Add support for Odroid-XU3
` [U-Boot] [PATCH v7 3/3] Odroid-XU3: Add documentation "

[U-Boot] [PATCH] x86: Fix a warning with gcc 4.4.4
 2014-11-13  5:25 UTC  (2+ messages)

[U-Boot] [PATCH v2 09/33] x86: Replace fill_processor_name() with cpu_get_name()
 2014-11-13  5:25 UTC  (4+ messages)
` [U-Boot] [PATCH v3] "

[U-Boot] [PATCH v2 0/33] x86: Add support for running on bare hardware
 2014-11-13  5:25 UTC  (20+ messages)
` [U-Boot] [PATCH v2 01/33] Move early malloc() to before arch_cpu_init()
` [U-Boot] [PATCH v2 02/33] fdt: Add a function to decode a variable-sized u32 array
` [U-Boot] [PATCH v2 03/33] dm: serial: Move current serial port pointer to global_data
` [U-Boot] [PATCH v2 04/33] dm: gpio: Add a function to read an ID from a list of GPIOs
` [U-Boot] [PATCH v2 05/33] x86: Add ifdtool for working with Intel Flash Descriptor ROM images
` [U-Boot] [PATCH v2 06/33] x86: config: Move common x86 configs to a common file
` [U-Boot] [PATCH v2 07/33] x86: Add processor functions to halt and get stack pointer
` [U-Boot] [PATCH v2 08/33] x86: Remove unnecessary find_fdt(), prepare_fdt() functions

[U-Boot] [PATCH 0/4] kbuild: descend into SOC directory from CPU directory
 2014-11-13  3:32 UTC  (7+ messages)
` [U-Boot] [PATCH 1/4] kbuild: Descend "
` [U-Boot] [PATCH 2/4] x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory
` [U-Boot] [PATCH 3/4] kbuild: use SoC-specific CONFIG to descend into SoC directory
` [U-Boot] [PATCH 4/4] tegra: do not descend into empty directories

[U-Boot] [PATCH 5/5] B4860QDS: Enable enet port as per fsl_b4860_serdes2 string in hwconfig
 2014-11-13  3:28 UTC 

[U-Boot] [PATCH 4/5] powerpc/b4860qds: add workaround for XFI
 2014-11-13  3:27 UTC 

[U-Boot] [PATCH 3/5] B4860QDS: Enable SFP or AMC on basis of hwconfig string
 2014-11-13  3:27 UTC 

[U-Boot] [PATCH 2/5] powerpc/b4860qds: dtb fixup for xfi
 2014-11-13  3:27 UTC 

[U-Boot] [PATCH 1/5] powerpc/b4860qds: add xfi support
 2014-11-13  3:26 UTC 

[U-Boot] Flat Image Tree and boot arguments
 2014-11-13  3:08 UTC  (3+ messages)

[U-Boot] [PATCH] buildman: Save *.img files too
 2014-11-13  3:08 UTC  (2+ messages)

[U-Boot] [PATCH v2 0/9] dm: Introduce driver model for Atmel at91
 2014-11-13  2:44 UTC  (2+ messages)

[U-Boot] [PATCH v2] mtd: nand: omap_gpmc: Always use ready/busy pin
 2014-11-13  2:43 UTC 

[U-Boot] [PATCH v2 01/11] fdt: Allow ft_board_setup() to report failure
 2014-11-13  2:40 UTC  (12+ messages)
` [U-Boot] [PATCH v2 04/11] fdt: Add device tree memory bindings
` [U-Boot] [PATCH v2 08/11] fdt: Add ft_system_setup() function for system device tree additions

[U-Boot] [PATCH v3] fs: make it possible to read the filesystem UUID
 2014-11-13  2:37 UTC  (3+ messages)
` [U-Boot] [PATCH v2] "

[U-Boot] putc
 2014-11-13  2:32 UTC  (3+ messages)

[U-Boot] [PATCH v3 0/7] Addition of new board Peach-Pi
 2014-11-13  2:23 UTC  (16+ messages)
` [U-Boot] [PATCH v3 1/7] Exynos5800: Introduce new proid for Exynos5800
` [U-Boot] [PATCH v3 2/7] Exynos5800: Add DTS for new board Peach-Pi
` [U-Boot] [PATCH v3 3/7] Config: Exynos5800: Enable build for Peach-Pi
` [U-Boot] [PATCH v3 4/7] DMC: Exynos5: Enable update mode for DREX controller
` [U-Boot] [PATCH v3 5/7] Config: Exynos5420: Refactor SDRAM Bank and Size
` [U-Boot] [PATCH v3 6/7] Exynos5: ddr3: Choose between single or double channel config
` [U-Boot] [PATCH v3 7/7] Peach-Pi: Use the enhanced usb_copy() prototype

[U-Boot] [PATCH v3 0/30] ARM: tegra: Add PCIe support
 2014-11-13  1:27 UTC  (31+ messages)
` [U-Boot] [PATCH v3 01/30] vsprintf: Add modifier for phys_addr_t
` [U-Boot] [PATCH v3 02/30] pci: Abort early if bus does not exist
` [U-Boot] [PATCH v3 03/30] pci: Honour pci_skip_dev()
` [U-Boot] [PATCH v3 04/30] Add pr_fmt() macro
` [U-Boot] [PATCH v3 05/30] power: Add AMS AS3722 PMIC support
` [U-Boot] [PATCH v3 06/30] ARM: tegra: Implement tegra_plle_enable()
` [U-Boot] [PATCH v3 07/30] ARM: tegra: Provide PCIEXCLK reset ID
` [U-Boot] [PATCH v3 08/30] ARM: tegra: Implement powergate support
` [U-Boot] [PATCH v3 09/30] ARM: tegra: Implement XUSB pad controller
` [U-Boot] [PATCH v3 10/30] ARM: tegra: Add XUSB pad controller on Tegra124
` [U-Boot] [PATCH v3 11/30] ARM: tegra: Enable XUSB pad controller on Jetson TK1
` [U-Boot] [PATCH v3 12/30] pci: tegra: Add Tegra PCIe driver
` [U-Boot] [PATCH v3 13/30] ARM: tegra: Add Tegra20 PCIe device tree node
` [U-Boot] [PATCH v3 14/30] ARM: tegra: Enable PCIe on TrimSlice
` [U-Boot] [PATCH v3 15/30] ARM: tegra: Add GIC for Tegra30
` [U-Boot] [PATCH v3 16/30] ARM: tegra: Add Tegra30 PCIe device tree node
` [U-Boot] [PATCH v3 17/30] ARM: tegra: Enable PCIe on Cardhu
` [U-Boot] [PATCH v3 18/30] ARM: tegra: Enable PCIe on Beaver
` [U-Boot] [PATCH v3 19/30] ARM: tegra: Add GIC for Tegra124
` [U-Boot] [PATCH v3 20/30] ARM: tegra: Add Tegra124 PCIe device tree node
` [U-Boot] [PATCH v3 21/30] ARM: tegra: Enable PCIe on Jetson TK1
` [U-Boot] [PATCH v3 22/30] ARM: cache_v7: Various minor cleanups
` [U-Boot] [PATCH v3 23/30] ARM: cache-cp15: Use more accurate types
` [U-Boot] [PATCH v3 24/30] malloc: Output region when debugging
` [U-Boot] [PATCH v3 25/30] ARM: Implement non-cached memory support
` [U-Boot] [PATCH v3 26/30] ARM: tegra: Enable non-cached memory
` [U-Boot] [PATCH v3 27/30] net: rtl8169: Honor CONFIG_SYS_RX_ETH_BUFFER
` [U-Boot] [PATCH v3 28/30] net: rtl8169: Properly align buffers
` [U-Boot] [PATCH v3 29/30] net: rtl8169: Use non-cached memory if available
` [U-Boot] [PATCH v3 30/30] net: rtl8169: Add support for RTL-8168/8111g

[U-Boot] [PATCH 0/9] net: rtl8169: Fix cache maintenance issues
 2014-11-13  1:22 UTC  (7+ messages)
` [U-Boot] [PATCH 7/9] net: rtl8169: Properly align buffers

[U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support
 2014-11-12 23:37 UTC  (6+ messages)
` [U-Boot] [PATCH v2 35/40] ARM: Implement non-cached memory support
` [U-Boot] [PATCH v2 38/40] net: rtl8169: Properly align buffers

[U-Boot] [PATCH v7 0/5] iMX6 SabreSD SPL Support
 2014-11-12 22:44 UTC  (7+ messages)
` [U-Boot] [PATCH v7 1/5] imx6: add spl config for mx6sabresd
` [U-Boot] [PATCH v7 2/5] imx6: add data configuration file for SPL
` [U-Boot] [PATCH v7 3/5] kconfig: imx6: add SUPPORT_SPL
` [U-Boot] [PATCH v7 4/5] imx6: add spl in the header file
` [U-Boot] [PATCH v7 5/5] imx6: SPL support for iMX6 SabreSD

[U-Boot] [ANN] U-Boot v2015.01-rc1 released
 2014-11-12 22:16 UTC  (7+ messages)

[U-Boot] [RFC PATCH] sf: New SF-NOR framework
 2014-11-12 22:16 UTC  (4+ messages)

[U-Boot] [PATCH] test: ums: Add sleep before unmount directory
 2014-11-12 21:49 UTC  (9+ messages)
` [U-Boot] [PATCH v2] "

[U-Boot] [PATCH 1/2] mtd: nand: omap_gpmc: Add CONFIG_SYS_NAND_USE_READY to enable ready/busy
 2014-11-12 21:34 UTC  (4+ messages)
` [U-Boot] [PATCH 2/2] arm: am335x: Enable CONFIG_SYS_NAND_USE_READY on siemens am33xx

[U-Boot] [PATCH v6 0/5] iMX6 SabreSD SPL Support
 2014-11-12 21:27 UTC  (13+ messages)
` [U-Boot] [PATCH v6 1/5] imx6: add spl config for mx6sabresd
` [U-Boot] [PATCH v6 2/5] imx6: add data configuration file for SPL
` [U-Boot] [PATCH v6 3/5] kconfig: imx6: add SUPPORT_SPL
` [U-Boot] [PATCH v6 4/5] imx6: add spl in the header file
` [U-Boot] [PATCH v6 5/5] imx6: SPL support for iMX6 SabreSD

[U-Boot] [PATCH v2] ARM: tegra: Add support for norrin board
 2014-11-12 19:35 UTC  (5+ messages)

[U-Boot] [PATCH v3] arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target
 2014-11-12 17:56 UTC  (2+ messages)

[U-Boot] [PATCH 0/6] arm: socfpga: Add Designware SPI support
 2014-11-12 17:53 UTC  (13+ messages)
` [U-Boot] [PATCH 1/6] arm: socfpga: Add DW master SPI clock to clock_manager.c
` [U-Boot] [PATCH 2/6] arm: socfpga: Add socfpga_spim_enable() to reset_manager.c
` [U-Boot] [PATCH 3/6] spi: Add designware master SPI DM driver used on SoCFPGA
` [U-Boot] [PATCH 4/6] arm: socfpga: dts: Add spi0/1 dts nodes for the Designware master SPI devices
` [U-Boot] [PATCH 5/6] arm: socfpga: dts: socrates: Add spi1/2 aliases needed DM SPI probing
` [U-Boot] [PATCH 6/6] arm: socfpga: Add Designware (DW) SPI support to config header

[U-Boot] [PATCH v3 0/8] *** iMX6 SabreSD SPL Support ***
 2014-11-12 16:14 UTC  (8+ messages)
` [U-Boot] [PATCH v3 7/8] imx6: SPL support for iMX6 SabreSD

[U-Boot] [PATCH v4 0/7] iMX6 SabreSD SPL Support
 2014-11-12 15:56 UTC  (6+ messages)
` [U-Boot] [PATCH v4 5/7] imx6: add some flexibility for defining macros

[U-Boot] [PATCH v6 0/3] Adds support for Exynos5422 odroid xu3 board
 2014-11-12 15:52 UTC  (7+ messages)
` [U-Boot] [PATCH v6 1/3] exynos5: fix GPIO information of exynos5420
` [U-Boot] [PATCH v6 2/3] Odroid-XU3: Add support for Odroid-XU3
` [U-Boot] [PATCH v6 3/3] Odroid-XU3: Add documentation "

[U-Boot] [PATCH] mx53loco: Change 'fdt_file' dynamically
 2014-11-12 15:51 UTC  (3+ messages)

[U-Boot] [PATCH 00/19] [RFC] Power(full) framework based on Driver Model
 2014-11-12 15:26 UTC  (11+ messages)
` [U-Boot] [PATCH 04/19] dm: pmic: add implementation of driver model pmic uclass

[U-Boot] [PATCH 0/33] x86: Add additional system setup for ivybridge
 2014-11-12 15:25 UTC  (7+ messages)
` [U-Boot] [PATCH 10/33] rtc: mc146818: Set up RTC at start of day
` [U-Boot] [PATCH 23/33] x86: ivybridge: Add SATA init

[U-Boot] [PATCH v2 2/4] x86: Do TSC MSR calibration only for known/supported CPUs
 2014-11-12 15:19 UTC  (6+ messages)

[U-Boot] [PATCH 0/6] kbuild, kconfig: sync with Linux 3.18-rc1
 2014-11-12 15:11 UTC  (3+ messages)
` [U-Boot] [PATCH 6/6] kbuild: Make scripts executable

[U-Boot] [PATCH 0/2] mtd: denali: Use SELF_INIT to fix up registers after nand_scan_ident()
 2014-11-12 15:06 UTC  (4+ messages)
` [U-Boot] [PATCH 1/2] mtd: denali: use CONFIG_SYS_NAND_SELF_INIT

[U-Boot] [PATCH v2 1/2] imx: mx6q/dl sabre_common: Move MMC ENV offset to 512KB position
 2014-11-12 11:28 UTC  (3+ messages)
` [U-Boot] [PATCH v2 2/2] imx: mx6q/dlsabreauto: And NAND flash support

[U-Boot] [PATCH] sata: fix a bug in init_sata() for pci-sata card
 2014-11-12 11:16 UTC 

[U-Boot] [PATCH] arm: am33xx: Handle NAND+I2C boot-device the same way as NAND
 2014-11-12 10:57 UTC 

[U-Boot] [PATCH for-next] arndale: Enable config_distro_defaults.h
 2014-11-12 10:45 UTC  (4+ messages)
` [U-Boot] [PATCH] arndale: Use config_distro_bootcmd.h

[U-Boot] [PATCH 1/3] 85xx/b4860: Add alternate serdes protocols for B4860/B4420
 2014-11-12 10:32 UTC 

[U-Boot] [PATCH 3/3] B4860: Add alternate LC VCO serdes protocols support in board file
 2014-11-12 10:30 UTC 

[U-Boot] [PATCH 2/3] B4860QDS: SGMII related updates
 2014-11-12 10:30 UTC 

[U-Boot] [PATCH 1/3] 85xx/b4860: Add alternate serdes protocols for B4860/B4420
 2014-11-12 10:29 UTC 

[U-Boot] [PATCH 1/3] 85xx/b4860: Add alternate serdes protocols for B4860/B4420
 2014-11-12 10:10 UTC  (3+ messages)
` [U-Boot] [PATCH 2/3] B4860QDS: SGMII related updates
` [U-Boot] [PATCH 3/3] B4860: Add alternate LC VCO serdes protocols support in board file

[U-Boot] [PATCH v3 0/3] add support for new arch stv0991
 2014-11-12  9:07 UTC  (3+ messages)
` [U-Boot] [PATCH v3 1/3] stv0991: Add basic stv0991 architecture support


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox