messages from 2014-12-09 20:17:19 to 2014-12-11 07:40:41 UTC [more...]
[U-Boot] [PATCH v3 0/9] sf: Update flash params for supported read commands and sector size
2014-12-11 7:40 UTC (18+ messages)
` [U-Boot] [PATCH v3 1/9] sf: Update SST flash params
` [U-Boot] [PATCH v3 2/9] sf: Update Atmel "
` [U-Boot] [PATCH v3 3/9] sf: Update EON "
` [U-Boot] [PATCH v3 4/9] sf: Update GigaDevice "
` [U-Boot] [PATCH v3 5/9] sf: Update Macronix "
` [U-Boot] [PATCH v3 6/9] sf: Update Spansion "
` [U-Boot] [PATCH v3 7/9] sf: Update Micron "
` [U-Boot] [PATCH v3 8/9] sf: Update Winbond "
` [U-Boot] [PATCH v3 9/9] sf: Give proper spacing between flash table params
[U-Boot] [PATCH v2 0/27] x86: Add Intel Queensbay platform support
2014-12-11 6:46 UTC (24+ messages)
` [U-Boot] [PATCH v2 02/27] tools/ifdtool: Support writing multiple files (-w) simultaneously
` [U-Boot] [PATCH v2 05/27] x86: ich6-gpio: Move setup_pch_gpios() to board support codes
` [U-Boot] [PATCH v2 07/27] x86: Add a simple superio driver for SMSC LPC47M
` [U-Boot] [PATCH v2 10/27] x86: Initial import from Intel FSP release for Queensbay platform
` [U-Boot] [PATCH v2 11/27] x86: queensbay: Adapt FSP support codes
` [U-Boot] [PATCH v2 13/27] x86: Support Intel FSP initialization path in start.S
` [U-Boot] [PATCH v2 14/27] x86: Add a simple command to show FSP HOB information
` [U-Boot] [PATCH v2 15/27] x86: Integrate Tunnel Creek processor microcode
[U-Boot] [PATCH 1/2] usb, g_dnl: generalize DFU detach functions
2014-12-11 6:14 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] fastboot: add support for continue command
[U-Boot] [PATCH] dm: sh: serial: Add support driver model
2014-12-11 4:49 UTC (2+ messages)
[U-Boot] [PATCH v6 0/11] dm: Add I2C support and convert sandbox, tegra
2014-12-11 3:35 UTC (17+ messages)
` [U-Boot] [PATCH v6 01/11] dm: i2c: Add a uclass for I2C
` [U-Boot] [PATCH v6 02/11] dm: i2c: Implement driver model support in the i2c command
` [U-Boot] [PATCH v6 03/11] dm: i2c: Add I2C emulation driver for sandbox
` [U-Boot] [PATCH v6 04/11] dm: i2c: Add a sandbox I2C driver
` [U-Boot] [PATCH v6 05/11] dm: i2c: Add an I2C EEPROM simulator
` [U-Boot] [PATCH v6 06/11] dm: i2c: config: Enable I2C for sandbox using driver model
` [U-Boot] [PATCH v6 07/11] dm: i2c: dts: Add an I2C bus for sandbox
` [U-Boot] [PATCH v6 08/11] dm: Add a simple EEPROM driver
` [U-Boot] [PATCH v6 09/11] dm: i2c: Add tests for I2C
` [U-Boot] [PATCH v6 10/11] dm: device: Add newline to debug() messages
` [U-Boot] [PATCH v6 11/11] dm: i2c: tegra: Convert to driver model
[U-Boot] [PATCH 00/19] [RFC] Power(full) framework based on Driver Model
2014-12-11 3:25 UTC (4+ messages)
` [U-Boot] [PATCH 01/19] lib: errno: introduce errno_str(): returns errno related message
[U-Boot] [PATCH] gpio: intel_ich6: Set correct gpio output value in ich6_gpio_direction_output()
2014-12-11 3:22 UTC (3+ messages)
[U-Boot] [RESEND PATCH] x86: ich-spi: Fix a bug of reading from a non-64 bytes aligned address
2014-12-11 3:19 UTC (2+ messages)
[U-Boot] [PATCH] bios_emulator: Correct ordering of includes
2014-12-11 3:12 UTC
[U-Boot] [PATCH v3 2/2] x86: ich-spi: Set the tx operation mode for ich 7
2014-12-11 2:58 UTC (4+ messages)
[U-Boot] Use .data section in SPL ?
2014-12-11 2:20 UTC (6+ messages)
[U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board
2014-12-11 2:11 UTC (9+ messages)
[U-Boot] Problem converting da850evm to generic board and use libfdt
2014-12-11 2:10 UTC (13+ messages)
[U-Boot] [PATCH 0/13] ARM: atmel: enable spl for sama5d4 related boards
2014-12-11 1:56 UTC (8+ messages)
` [U-Boot] [PATCH 12/13] ARM: atmel: sama5d4ek: enable SPL support
` [U-Boot] [PATCH 13/13] ARM: atmel: sama5d4_xplained: enable spl support
[U-Boot] [PATCH v2] fastboot: handle flash write to GPT partition
2014-12-11 1:48 UTC (3+ messages)
[U-Boot] [PATCH v3] fastboot: handle flash write to GPT partitions
2014-12-11 1:40 UTC
[U-Boot] [PATCH] spl: spl_nor: surround Linux-load code with #ifdef CONFIG_SPL_OS_BOOT
2014-12-11 1:34 UTC (2+ messages)
[U-Boot] [PATCH v9 0/3] Adds support for Exynos5422 odroid xu3 board
2014-12-11 1:13 UTC (18+ messages)
` [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3
[U-Boot] [PATCHv1] powerpc/p2041rdb: Convert to generic board
2014-12-10 22:34 UTC (3+ messages)
[U-Boot] [PATCH v5 1/3] dts: Bring in Chrome OS keyboard device tree definition
2014-12-10 21:45 UTC (7+ messages)
` [U-Boot] [PATCH v5 3/3] ARM: tegra: Add support for nyan-big board
[U-Boot] [PULL] Please pull u-boot-imx
2014-12-10 21:40 UTC (2+ messages)
[U-Boot] Pull request: u-boot-sh/rmolbile
2014-12-10 21:39 UTC (2+ messages)
[U-Boot] [PATCH] beagle_x15: enable NFS command
2014-12-10 20:16 UTC
[U-Boot] [PATCH 0/17] buildman: A few more features and improvements (Christmas edition)
2014-12-10 19:58 UTC (4+ messages)
[U-Boot] [PATCH v5 0/11] dm: Add I2C support and convert sandbox, tegra
2014-12-10 18:00 UTC (18+ messages)
` [U-Boot] [PATCH v5 01/11] dm: i2c: Add a uclass for I2C
` [U-Boot] [PATCH v5 02/11] dm: i2c: Implement driver model support in the i2c command
` [U-Boot] [PATCH v5 03/11] dm: i2c: Add I2C emulation driver for sandbox
` [U-Boot] [PATCH v5 04/11] dm: i2c: Add a sandbox I2C driver
` [U-Boot] [PATCH v5 05/11] dm: i2c: Add an I2C EEPROM simulator
` [U-Boot] [PATCH v5 07/11] dm: i2c: dts: Add an I2C bus for sandbox
` [U-Boot] [PATCH v5 08/11] dm: Add a simple EEPROM driver
[U-Boot] [PATCH] dm: serial: pl01x: Add priv_auto_alloc_size
2014-12-10 18:00 UTC (2+ messages)
[U-Boot] [PATCH v3 0/2] dm: rpi: Move Raspberry Pi to use driver model
2014-12-10 17:59 UTC (6+ messages)
` [U-Boot] [PATCH v3 1/2] dm: rpi: Move serial to "
` [U-Boot] [PATCH v3 2/2] dm: serial_pl01x: Add missing private data size
[U-Boot] [PATCH v1 1/1] Fix autoconf_is_current make function
2014-12-10 16:52 UTC
[U-Boot] USB Host not enumerating properly on AM335x-based board
2014-12-10 15:23 UTC (2+ messages)
[U-Boot] [PATCH v4 11/11] dm: i2c: tegra: Convert to driver model
2014-12-10 15:19 UTC (4+ messages)
[U-Boot] [PATCH v4 0/23] ARM: tegra: Add PCIe support
2014-12-10 15:03 UTC (25+ messages)
` [U-Boot] [PATCH v4 01/23] power: Add AMS AS3722 PMIC support
` [U-Boot] [PATCH v4 02/23] ARM: tegra: Implement tegra_plle_enable()
` [U-Boot] [PATCH v4 03/23] ARM: tegra: Provide PCIEXCLK reset ID
` [U-Boot] [PATCH v4 04/23] ARM: tegra: Implement powergate support
` [U-Boot] [PATCH v4 05/23] ARM: tegra: Implement XUSB pad controller
` [U-Boot] [PATCH v4 06/23] ARM: tegra: Add XUSB pad controller on Tegra124
` [U-Boot] [PATCH v4 07/23] ARM: tegra: Enable XUSB pad controller on Jetson TK1
` [U-Boot] [PATCH v4 08/23] pci: tegra: Add Tegra PCIe driver
` [U-Boot] [PATCH v4 09/23] ARM: tegra: Add Tegra20 PCIe device tree node
` [U-Boot] [PATCH v4 10/23] ARM: tegra: Enable PCIe on TrimSlice
` [U-Boot] [PATCH v4 11/23] ARM: tegra: Add GIC for Tegra30
` [U-Boot] [PATCH v4 12/23] ARM: tegra: Add Tegra30 PCIe device tree node
` [U-Boot] [PATCH v4 13/23] ARM: tegra: Enable PCIe on Cardhu
` [U-Boot] [PATCH v4 14/23] ARM: tegra: Enable PCIe on Beaver
` [U-Boot] [PATCH v4 15/23] ARM: tegra: Add GIC for Tegra124
` [U-Boot] [PATCH v4 16/23] ARM: tegra: Add Tegra124 PCIe device tree node
` [U-Boot] [PATCH v4 17/23] ARM: tegra: Enable PCIe on Jetson TK1
` [U-Boot] [PATCH v4 18/23] ARM: Implement non-cached memory support
` [U-Boot] [PATCH v4 19/23] ARM: tegra: Enable non-cached memory
` [U-Boot] [PATCH v4 20/23] net: rtl8169: Honor CONFIG_SYS_RX_ETH_BUFFER
` [U-Boot] [PATCH v4 21/23] net: rtl8169: Properly align buffers
` [U-Boot] [PATCH v4 22/23] net: rtl8169: Use non-cached memory if available
` [U-Boot] [PATCH v4 23/23] net: rtl8169: Add support for RTL-8168/8111g
[U-Boot] [PATCH v4 01/11] dm: i2c: Add a uclass for I2C
2014-12-10 13:18 UTC (3+ messages)
[U-Boot] [PATCH v2] powerpc/t4240rdb: Add alternate SerDes 2 protocol to align with RCW
2014-12-10 12:00 UTC
[U-Boot] [PATCH] powerpc/t4240rdb: Add alternate SerDes 2 protocol to align with RCW
2014-12-10 11:10 UTC
[U-Boot] ti, am3517: errata 430973 workaround
2014-12-10 10:25 UTC (3+ messages)
[U-Boot] [PATCH] memmove_wd: copy chunk down from big address if parameter to is larger than from
2014-12-10 10:20 UTC
[U-Boot] [PATCH 0/4] sf: SST changes, Byte program
2014-12-10 10:18 UTC (9+ messages)
` [U-Boot] [PATCH 1/4] sf: Fix look for the fastest read command
` [U-Boot] [PATCH 3/4] spi: sf: Support byte program for sst spi flash
` [U-Boot] [PATCH 4/4] sf: Enable byte program support
[U-Boot] [PATCH] arm: mx6: Add Barco platinum-picon and platinum-titanium
2014-12-10 9:15 UTC
[U-Boot] compiling error for rc3
2014-12-10 9:14 UTC (2+ messages)
[U-Boot] [PATCH v3 1/2] x86: ich-spi: Set the rx operation mode for ich 7
2014-12-10 8:37 UTC
[U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number
2014-12-10 8:24 UTC
[U-Boot] [PATCH 1/2] arm: ls102xa: Add dummy gpio.h to enable CONFIG_OF_CONTROL
2014-12-10 7:50 UTC (2+ messages)
[U-Boot] [PATCH] arm: rmobile: kconfig: Remove '+S:' prefix from defconfig files
2014-12-10 7:28 UTC
[U-Boot] [PATCH 2/2] powerpc: mpc85xx: Add dummy gpio.h to enable CONFIG_OF_CONTROL
2014-12-10 6:22 UTC
[U-Boot] [PATCH] serial: sh: Remove invalid UTF-8 character
2014-12-10 5:45 UTC
[U-Boot] [PATCH v2 01/11] fdt: Allow ft_board_setup() to report failure
2014-12-10 5:31 UTC (11+ messages)
` [U-Boot] [PATCH v2 04/11] fdt: Add device tree memory bindings
[U-Boot] [PATCH 1/4] arm: rmobile: Add mmc.h for sh_mmcif of rmobile
2014-12-10 5:26 UTC (4+ messages)
` [U-Boot] [PATCH 2/4] arm: rmobile: rcar: Add support ext2 and ext4 file system
` [U-Boot] [PATCH 3/4] arm: rmobile: lager: Add support MMC and MMC command
` [U-Boot] [PATCH 4/4] arm: rmobile: alt: "
[U-Boot] [PATCH 1/2] x86: move arch-specific asmlinkage to <asm/linkage.h>
2014-12-10 5:12 UTC (4+ messages)
[U-Boot] [RFC PATCH v1 0/1] net: Support for Broadcom Tigon 3 NICs
2014-12-10 3:34 UTC (2+ messages)
` [U-Boot] [RFC PATCH v1] net: Add support for Tigon3 based Ethernet NICs
[U-Boot] [PATCH] arm:ls1021a:configure ls1021 scfg for QSPI
2014-12-10 2:41 UTC (3+ messages)
[U-Boot] [PATCH v2] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board
2014-12-10 2:38 UTC (4+ messages)
[U-Boot] U-Boot on nyan-big via legacy boot
2014-12-10 0:56 UTC (4+ messages)
[U-Boot] [PATCH] common/board_f.c: fix compile error when tracing disabled
2014-12-10 0:48 UTC (2+ messages)
[U-Boot] [PATCH v3] bcm281xx: add support for "USB OTG clock"
2014-12-09 21:21 UTC (2+ messages)
[U-Boot] [PATCH 2/2] dm: stv0991: Move serial to driver model
2014-12-09 20:17 UTC (2+ messages)
` [U-Boot] [U-Boot,2/2] "
[U-Boot] [PATCH 1/2] stv0991: increase the initial ram size config
2014-12-09 20:17 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH v5 3/3] stv0991: enable default and misc command configs
2014-12-09 20:17 UTC (2+ messages)
` [U-Boot] [U-Boot, v5, "
[U-Boot] [PATCH v5 2/3] stv0991: enable ethernet support
2014-12-09 20:17 UTC (2+ messages)
` [U-Boot] [U-Boot,v5,2/3] "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox