public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
 messages from 2014-12-08 09:31:11 to 2014-12-09 21:15:31 UTC [more...]

[U-Boot] compiling error for rc3
 2014-12-09 21:15 UTC 

[U-Boot] [PATCH 2/2] dm: stv0991: Move serial to driver model
 2014-12-09 20:17 UTC  (2+ messages)
` [U-Boot] [U-Boot,2/2] "

[U-Boot] [PATCH 1/2] stv0991: increase the initial ram size config
 2014-12-09 20:17 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH v5 3/3] stv0991: enable default and misc command configs
 2014-12-09 20:17 UTC  (2+ messages)
` [U-Boot] [U-Boot, v5, "

[U-Boot] [PATCH v5 2/3] stv0991: enable ethernet support
 2014-12-09 20:17 UTC  (2+ messages)
` [U-Boot] [U-Boot,v5,2/3] "

[U-Boot] [PATCH v5 1/3] stv0991: Add basic stv0991 architecture support
 2014-12-09 20:17 UTC  (2+ messages)
` [U-Boot] [U-Boot, v5, "

[U-Boot] [PATCH v3] bcm281xx: add support for "USB OTG clock"
 2014-12-09 19:40 UTC 

[U-Boot] [PATCH v2] bcm281xx: add support for "USB OTG clock"
 2014-12-09 19:38 UTC  (3+ messages)

[U-Boot] [U-boot PATCH] keystone: set default pci mode to root complex
 2014-12-09 19:32 UTC 

[U-Boot] [PATCH] arm:ls1021a:configure ls1021 scfg for QSPI
 2014-12-09 19:05 UTC  (2+ messages)

[U-Boot] U-Boot on nyan-big via legacy boot
 2014-12-09 18:19 UTC  (3+ messages)

[U-Boot] [PATCH v4] Export redesign
 2014-12-09 16:04 UTC  (2+ messages)

[U-Boot] [PATCH] mxsldr: add status read after firmware upload
 2014-12-09 16:00 UTC 

[U-Boot] [PATCH 0/4] sf: SST changes, Byte program
 2014-12-09 15:32 UTC  (6+ messages)
` [U-Boot] [PATCH 1/4] sf: Fix look for the fastest read command
` [U-Boot] [PATCH 2/4] spi: Fix flag collision for SST_WP
` [U-Boot] [PATCH 3/4] spi: sf: Support byte program for sst spi flash
` [U-Boot] [PATCH 4/4] sf: Enable byte program support

[U-Boot] [PATCH v2 0/27] x86: Add Intel Queensbay platform support
 2014-12-09 14:50 UTC  (28+ messages)
` [U-Boot] [PATCH v2 01/27] x86: Make ROM_SIZE configurable in Kconfig
` [U-Boot] [PATCH v2 02/27] tools/ifdtool: Support writing multiple files (-w) simultaneously
` [U-Boot] [PATCH v2 03/27] x86: Refactor u-boot.rom build rules
` [U-Boot] [PATCH v2 04/27] x86: Clean up asm-offsets
` [U-Boot] [PATCH v2 05/27] x86: ich6-gpio: Move setup_pch_gpios() to board support codes
` [U-Boot] [PATCH v2 06/27] x86: Add Intel Crown Bay board dts file
` [U-Boot] [PATCH v2 07/27] x86: Add a simple superio driver for SMSC LPC47M
` [U-Boot] [PATCH v2 08/27] x86: Add Intel Topcliff PCH device IDs
` [U-Boot] [PATCH v2 09/27] x86: ich-spi: Add Intel Tunnel Creek SPI controller support
` [U-Boot] [PATCH v2 10/27] x86: Initial import from Intel FSP release for Queensbay platform
` [U-Boot] [PATCH v2 11/27] x86: queensbay: Adapt FSP support codes
` [U-Boot] [PATCH v2 12/27] x86: Add post failure codes for bist and car
` [U-Boot] [PATCH v2 13/27] x86: Support Intel FSP initialization path in start.S
` [U-Boot] [PATCH v2 14/27] x86: Add a simple command to show FSP HOB information
` [U-Boot] [PATCH v2 15/27] x86: Integrate Tunnel Creek processor microcode
` [U-Boot] [PATCH v2 16/27] x86: Add basic support to queensbay platform and crownbay board
` [U-Boot] [PATCH v2 17/27] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support
` [U-Boot] [PATCH v2 18/27] x86: Enable the queensbay cpu directory build
` [U-Boot] [PATCH v2 19/27] x86: Add queensbay and crownbay Kconfig files
` [U-Boot] [PATCH v2 20/27] x86: Add crownbay defconfig and config.h
` [U-Boot] [PATCH v2 21/27] x86: Use consistent name XXX_ADDR for binary blob flash address
` [U-Boot] [PATCH v2 22/27] x86: Include FSP and CMC binary in the u-boot.rom build rules
` [U-Boot] [PATCH v2 23/27] x86: crownbay: Add SPI flash support
` [U-Boot] [PATCH v2 24/27] x86: crownbay: Enable Intel E1000 NIC support
` [U-Boot] [PATCH v2 25/27] x86: crownbay: Add SDHCI support
` [U-Boot] [PATCH v2 26/27] x86: Rename coreboot-serial to x86-serial
` [U-Boot] [PATCH v2 27/27] x86: Add a README.x86 for U-Boot on x86 support

[U-Boot] [PATCH 16/25] x86: Integrate Tunnel Creek processor microcode
 2014-12-09 14:39 UTC  (5+ messages)

[U-Boot] Hi Simon, Problems about RSA public exponents for verified boot
 2014-12-09 14:17 UTC  (3+ messages)

[U-Boot] [PATCH V3 00/12] cleanup and refactor lcd.c
 2014-12-09 13:57 UTC  (14+ messages)
` [U-Boot] [PATCH V3 01/12] lcd: remove CONFIG_SYS_INVERT_COLORS
` [U-Boot] [PATCH V3 02/12] lcd: cleanup lcd_drawchars
` [U-Boot] [PATCH V3 03/12] mpc8xx_lcd: get rid of CONFIG_EDT32F10
` [U-Boot] [PATCH V3 04/12] lcd: remove LCD_MONOCHROME
` [U-Boot] [PATCH V3 05/12] lcd: rename console_(row|col)
` [U-Boot] [PATCH V3 06/12] lcd: replace CONSOLE_(ROWS|COLS) with variables
` [U-Boot] [PATCH V3 07/12] lcd: expand console api
` [U-Boot] [PATCH V3 08/12] lcd: get rid of COLOR_MASK
` [U-Boot] [PATCH V3 09/12] lcd: introduce getters for bg/fg color
` [U-Boot] [PATCH V3 10/12] lcd: make lcd_drawchars() independant of lcd_base
` [U-Boot] [PATCH V3 11/12] lcd: refactor lcd console stuff into its own file
` [U-Boot] [PATCH V3 12/12] lcd_console: remove unused defines

[U-Boot] [PATCH v5 0/11] dm: Add I2C support and convert sandbox, tegra
 2014-12-09 13:54 UTC  (6+ messages)
` [U-Boot] [PATCH v5 01/11] dm: i2c: Add a uclass for I2C

[U-Boot] [PATCH 0/5] peach_pi: Add support for FIMD and DP
 2014-12-09 13:32 UTC  (12+ messages)
` [U-Boot] [PATCH 2/5] arm: exynos: add display clocks for Exynos5800
` [U-Boot] [PATCH 4/5] exynos5420: Add LCD and LED powerup settings for peach-pi

[U-Boot] [PATCH 1/2] RFC: dm: Kconfig: Move all driver model CONFIGs to Kconfig
 2014-12-09 13:21 UTC  (2+ messages)
` [U-Boot] [PATCH 2/2] Kconfig: Move CONFIG_SYS_MALLOC_F_LEN "

[U-Boot] [PATCH v9 0/3] Adds support for Exynos5422 odroid xu3 board
 2014-12-09 13:15 UTC  (15+ messages)
` [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3

[U-Boot] /proc/cpuinfo Revision field is 0000 on raspberry pi after booting with u-boot
 2014-12-09 13:01 UTC 

[U-Boot] A23 u-boot with SPL / dram init available in my personal git repo
 2014-12-09 12:31 UTC  (8+ messages)

[U-Boot] [PATCH ] MMC: add MMC_VERSION_5_0
 2014-12-09 10:04 UTC  (2+ messages)

[U-Boot] [PATCH] sun6i: Add new board Merrii Hummingbird A31
 2014-12-09  9:50 UTC  (4+ messages)

[U-Boot] [PATCH v1] ls102xa: etsec: Select ge0_clk125 for eTSEC clock muxing as default
 2014-12-09  9:38 UTC 

[U-Boot] [PATCH v5] arm: ls102xa: Add NAND boot support for LS1021AQDS board
 2014-12-09  9:38 UTC 

[U-Boot] [PATCH v2] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board
 2014-12-09  9:38 UTC 

[U-Boot] [PATCH v1] arm: ls102xa: Fix SD/NAND/QSPI boot defination error for QE support
 2014-12-09  9:37 UTC 

[U-Boot] [PATCH v2] arm: ls1021a: Add CONFIG_DOS_PARTITION and CONFIG_CMD_FAT support
 2014-12-09  9:37 UTC 

[U-Boot] [ANN] U-Boot v2015.01-rc3 released
 2014-12-09  9:32 UTC  (7+ messages)

[U-Boot] [PATCH 1/2] sun6i: Update Colombus defconfig settings
 2014-12-09  9:29 UTC  (6+ messages)

[U-Boot] [PATCH v2] fastboot: handle flash write to GPT partition
 2014-12-09  9:05 UTC  (2+ messages)

[U-Boot] [PATCH] p5040ds: changed liodn offsets
 2014-12-09  9:00 UTC 

[U-Boot] ti, am3517: errata 430973 workaround
 2014-12-09  8:51 UTC  (2+ messages)

[U-Boot] [PATCH v1] fastboot: handle flash write to GPT partition
 2014-12-09  8:22 UTC  (6+ messages)

[U-Boot] [PATCH v2] odroid-XU3: Add entry for DTS EHCI GPIO
 2014-12-09  7:44 UTC  (6+ messages)

[U-Boot] [PATCH] mtd: nand: mxs: Add support for multiple NAND chips
 2014-12-09  7:34 UTC  (7+ messages)

[U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board
 2014-12-09  2:39 UTC  (4+ messages)
` [U-Boot] [PATCH v11 1/3] config: exynos5420: move non common configs to specific board files
` [U-Boot] [PATCH v11 2/3] Odroid-XU3: Add support for Odroid-XU3
` [U-Boot] [PATCH v11 3/3] Odroid-XU3: Add documentation "

[U-Boot] [PATCH v2 03/12] spi: sf: Support byte program for sst spi flash
 2014-12-09  2:31 UTC  (3+ messages)

[U-Boot] [PATCH v4 9/9] arm: ls102xa: Add NAND boot support for LS1021AQDS board
 2014-12-09  2:30 UTC  (3+ messages)

[U-Boot] [PATCH v10 0/4] Adds support for Exynos5422 odroid xu3 board
 2014-12-09  2:09 UTC  (7+ messages)
` [U-Boot] [PATCH v10 2/4] Odroid-XU3: Add support for Odroid-XU3
` [U-Boot] [PATCH v10 3/4] Odroid-XU3: Add documentation "

[U-Boot] [PATCH] arm/ls1021a: Add workaround for DDR erratum A008378
 2014-12-08 23:30 UTC 

[U-Boot] [PATCH v2] exynos5250/arndale: Enable SATA/AHCI support
 2014-12-08 22:24 UTC  (2+ messages)

[U-Boot] Pull request: u-boot-uniphier (updated!)
 2014-12-08 21:44 UTC  (2+ messages)

[U-Boot] [PATCH] kconfig: Fix warning "‘jump’ may be used uninitialized"
 2014-12-08 21:43 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH 3/3] libfdt: move CONFIG_OF_LIBFDT and CONFIG_FIT to lib/Makefile
 2014-12-08 21:43 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH 2/3] libfdt: descend from lib/ to lib/libfdt/
 2014-12-08 21:43 UTC  (2+ messages)
` [U-Boot] [U-Boot,2/3] "

[U-Boot] [PATCH 1/3] lib: bzip2: move bzip2 files to lib/bzip2/ directory
 2014-12-08 21:43 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH v2] fdt: Allow non-FDT kernels to boot when CONFIG_OF_LIBFDT is defined
 2014-12-08 21:43 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH 2/2] blackfin: include <linux/compiler.h> rather than define __iomem
 2014-12-08 21:43 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH 1/2] linux/compat.h: remove redundant macro defines
 2014-12-08 21:43 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH] Replace <compiler.h> with <linux/compiler.h>
 2014-12-08 21:43 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH] Add Alison Wang m68k custodian email/alias
 2014-12-08 21:43 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH v2] Add custodians to the m68k subsystem
 2014-12-08 21:43 UTC  (2+ messages)
` [U-Boot] [U-Boot,v2] "

[U-Boot] [PATCH v2] Kbuild: introduce Makefile in arch/$ARCH/
 2014-12-08 21:43 UTC  (2+ messages)
` [U-Boot] [U-Boot,v2] "

[U-Boot] [PATCH v3] arm: bcm: update Cygnus and NSP board families
 2014-12-08 21:42 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH v2 5/5] serial: pl01x: avoid pl01x type check two times
 2014-12-08 21:42 UTC  (2+ messages)
` [U-Boot] [U-Boot, v2, "

[U-Boot] [PATCH v2 4/5] serial: pl01x: disable as per type of pl01x
 2014-12-08 21:42 UTC  (2+ messages)
` [U-Boot] [U-Boot, v2, "

[U-Boot] [PATCH v2 3/5] serial: pl01x: move all line control at same place
 2014-12-08 21:42 UTC  (2+ messages)
` [U-Boot] [U-Boot, v2, "

[U-Boot] [PATCH v2 2/5] serial: pl01x: fix pl011 baud rate configuration
 2014-12-08 21:42 UTC  (2+ messages)
` [U-Boot] [U-Boot, v2, "

[U-Boot] [PATCH v2 1/5] serial: pl01x: pass pl01x_type to set baudrate
 2014-12-08 21:42 UTC  (2+ messages)
` [U-Boot] [U-Boot, v2, "

[U-Boot] [PATCH 3/3] imx6: remove redudant CONFIG_SPL_START_S_PATH define
 2014-12-08 21:42 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH 2/3] powerpc: a3m071: remove redundant CONFIG_SPL_* defines
 2014-12-08 21:42 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH 1/3] powerpc: lwmon5: remove redundant CONFIG_SPL_* defines
 2014-12-08 21:42 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH v2] powerpc: mpc8xx: remove hermes board support
 2014-12-08 21:42 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH v2] cmd_fuse: return CMD_RET_FAILURE on error
 2014-12-08 21:42 UTC  (2+ messages)
` [U-Boot] [U-Boot,v2] "

[U-Boot] [PATCH 2/2] ARM: rpi: support an environment
 2014-12-08 21:42 UTC  (2+ messages)
` [U-Boot] [U-Boot,2/2] "

[U-Boot] [PATCH 1/2] ARM: rpi: rename rpi_b to rpi
 2014-12-08 21:42 UTC  (2+ messages)
` [U-Boot] [U-Boot,1/2] "

[U-Boot] [PATCH] git-mailrc: fix mips alias
 2014-12-08 21:41 UTC  (3+ messages)
` [U-Boot] "

[U-Boot] [PATCH U-Boot] ARM: rpi_b: detect board revision
 2014-12-08 21:41 UTC  (2+ messages)
` [U-Boot] [U-Boot,U-Boot] "

[U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
 2014-12-08 21:41 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of UBI
 2014-12-08 21:41 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH] net: bootp: as CONFIG_BOOTP_SERVERIP is defined, keep bootfile not changed
 2014-12-08 21:41 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH] get_maintainer.pl: fix source tree detection
 2014-12-08 21:41 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH] Fix console functions for U-Boot API
 2014-12-08 21:41 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH 2/2] spl: MMC U-Boot image load from raw partition
 2014-12-08 21:41 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH 1/2] MMC SD fs boot partition config coding style and proper description
 2014-12-08 21:41 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] Please pull u-boot-mpc85xx master
 2014-12-08 21:41 UTC  (2+ messages)

[U-Boot] Please pull u-boot-ti/master
 2014-12-08 21:41 UTC  (2+ messages)

[U-Boot] [i2c] Pull request
 2014-12-08 21:41 UTC  (2+ messages)

[U-Boot] Pull request: u-boot-sh/master
 2014-12-08 21:40 UTC  (2+ messages)

[U-Boot] [PATCH] doc/gitmail-rc: Update m68k alias
 2014-12-08 21:40 UTC  (2+ messages)

[U-Boot] Link error for arm targets
 2014-12-08 20:21 UTC  (3+ messages)

[U-Boot] [PATCH V5] mpc85xx: inhibit qman and bman portals by default
 2014-12-08 19:54 UTC 

[U-Boot] [PATCH v4] mpc85xx: inhibit bman portals by default
 2014-12-08 19:51 UTC 

[U-Boot] [PATCH] Add support for Seagate BlackArmor NAS220
 2014-12-08 16:49 UTC 

[U-Boot] [PATCH RFC] arm: mx6: Add CCGR0 configuration to default DCD (spl_sd.cfg)
 2014-12-08 16:27 UTC  (9+ messages)

[U-Boot] [PATCH v2 6/9] ARM: UniPhier: add more device nodes to device tree
 2014-12-08 15:18 UTC  (4+ messages)
` [U-Boot] [PATCH v2 7/9] ARM: UniPhier: add device tree sources for PH1-sLD3

[U-Boot] USB Host not enumerating properly on AM335x-based board
 2014-12-08 13:59 UTC  (3+ messages)

[U-Boot] Implementing the uBoot SYSCALL interface for MIPS
 2014-12-08 12:42 UTC 

[U-Boot] [PATCH 1/6] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define
 2014-12-08 11:48 UTC  (3+ messages)

[U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning
 2014-12-08 11:40 UTC  (12+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox