messages from 2014-12-15 08:01:45 to 2014-12-16 08:03:37 UTC [more...]
[U-Boot] [PATCH] cros-ec-keyboard: Synchronize DT binding from linux
2014-12-16 8:03 UTC (3+ messages)
[U-Boot] [PATCH] powerpc/t1024: add serdes protocol 0x40
2014-12-16 7:10 UTC
[U-Boot] [PATCH] ls102xa: dcu: Add platform support for DCU on LS1021AQDS board
2014-12-16 6:50 UTC
[U-Boot] [PATCH 0/5] arm: omap: reset sata on OS boot
2014-12-16 6:50 UTC (12+ messages)
` [U-Boot] [PATCH 1/5] ahci: introduce ahci_reset()
` [U-Boot] [PATCH 2/5] ahci-plat: provide a weak scsi_bus_reset() hook
` [U-Boot] [PATCH 3/5] OMAP5+: sata/scsi: implement scsi_bus_reset()
` [U-Boot] [PATCH 4/5] arm: omap: reset sata on boot
` [U-Boot] [PATCH 5/5] omap5: cm-t54: add sata support
[U-Boot] [PATCH] mtd: nand: revive "nand scrub" command
2014-12-16 6:41 UTC (10+ messages)
[U-Boot] [PATCH v2] mtd: nand: revive "nand scrub" command
2014-12-16 6:36 UTC
[U-Boot] Problem converting da850evm to generic board and use libfdt
2014-12-16 6:27 UTC (14+ messages)
[U-Boot] [PATCH] powerpc: SECURE BOOT- Add secure boot target for T1042RDB
2014-12-16 6:18 UTC
[U-Boot] [PATCH] powerpc/913x: Add config flag for bootdelay
2014-12-16 6:15 UTC (4+ messages)
[U-Boot] [PATCH v2] x86: Clean up the FSP support codes
2014-12-16 5:18 UTC (2+ messages)
[U-Boot] [PATCH 0/8] x86: Support microcode in a single place
2014-12-16 5:03 UTC (18+ messages)
` [U-Boot] [PATCH 2/8] x86: ifdtool: Correct a debug() missing parameter
` [U-Boot] [PATCH 3/8] x86: ifdtool: Display filename when file errors are reported
` [U-Boot] [PATCH 4/8] x86: ifdtool: Use a structure for the file/address list
` [U-Boot] [PATCH 5/8] x86: ifdtool: Add support for early microcode access
` [U-Boot] [PATCH 6/8] x86: Move microcode updates into a separate directory
` [U-Boot] [PATCH 8/8] x86: Convert microcode format to device-tree-only
[U-Boot] [PATCH v2 0/6] x86: Support microcode in a single place
2014-12-16 5:02 UTC (7+ messages)
` [U-Boot] [PATCH v2 1/6] x86: Add a script to process Intel microcode files
` [U-Boot] [PATCH v2 2/6] x86: ifdtool: Add support for early microcode access
` [U-Boot] [PATCH v2 3/6] x86: Move microcode updates into a separate directory
` [U-Boot] [PATCH v2 4/6] x86: ivybridge: Update the microcode
` [U-Boot] [PATCH v2 5/6] x86: Correct problems in the microcode loading
` [U-Boot] [PATCH v2 6/6] x86: Convert microcode format to device-tree-only
[U-Boot] [PATCH 0/17] buildman: A few more features and improvements (Christmas edition)
2014-12-16 4:54 UTC (3+ messages)
` [U-Boot] [PATCH 01/17] buildman: Add tests that check the correct output directory is used
[U-Boot] [PATCH 0/19] powerpc: Introduce device tree control and driver model
2014-12-16 4:39 UTC (22+ messages)
` [U-Boot] [PATCH 01/19] Introduce board_init_f_mem() to handle early memory layout
` [U-Boot] [PATCH 02/19] powerpc: Permit device tree control of U-Boot (CONFIG_OF_CONTROL)
` [U-Boot] [PATCH 03/19] powerpc: ppc4xx: canyonlands: config: Tidy up CONFIGs and config.mk
` [U-Boot] [PATCH 04/19] powerpc: ppc4xx: Move CANYONLANDS/GLACIER/ARCHES to Kconfig
` [U-Boot] [PATCH 05/19] powerpc: ppc4xx: Add ramboot config for glacier
` [U-Boot] [PATCH 06/19] WIP: powerpc: ppc4xx: Somehow BSS is not cleared in RAMBOOT case
` [U-Boot] [PATCH 07/19] powerpc: ppc4xx: canyonlands: Move to generic board
` [U-Boot] [PATCH 08/19] powerpc: ppc4xx: dts: Bring in canyonlands device tree files
` [U-Boot] [PATCH 09/19] powerpc: ppc4xx: Call board_init_f_mem() for generic board
` [U-Boot] [PATCH 10/19] powerpc: ppc4xx: Add a gpio.h header file
` [U-Boot] [PATCH 11/19] powerpc: ppc4xx: Allow the end of u-boot.bin to be found
` [U-Boot] [PATCH 12/19] powerpc: ppc4xx: Use CONFIG_OF_CONTROL for canyonlands boards
` [U-Boot] [PATCH 13/19] ppc: amcc: Omit unneeded ns16550 CONFIG if using driver model
` [U-Boot] [PATCH 14/19] powerpc: Add serial driver for "
` [U-Boot] [PATCH 15/19] dm: powerpc: ppc4xx: Move glacier to use driver model for serial
` [U-Boot] [PATCH 16/19] powerpc: Add linkage.h file
` [U-Boot] [PATCH 17/19] serial: Support an early UART for debugging
` [U-Boot] [PATCH 18/19] serial: ns16550: Support debug UART
` [U-Boot] [PATCH 19/19] powerpc: ppc4xx: Provide early debug UART defaults
[U-Boot] [PATCH] x86: ifdtool: Separate out filenames for -D and -i
2014-12-16 4:27 UTC (2+ messages)
[U-Boot] [PATCH 16/25] x86: Integrate Tunnel Creek processor microcode
2014-12-16 4:12 UTC (4+ messages)
[U-Boot] [OpenQuestion] stdint.h and inttypes.h in U-Boot ?
2014-12-16 1:47 UTC (3+ messages)
[U-Boot] [PATCH 0/10] Provide inttypes.h to avoid 32/64 bit problems with printf()
2014-12-16 1:38 UTC (7+ messages)
` [U-Boot] [PATCH 04/10] Use uint64_t for time types
` [U-Boot] [PATCH 08/10] scsi: Use correct printf() format string for uintptr_t
[U-Boot] Please pull u-boot-x86
2014-12-16 1:15 UTC (2+ messages)
[U-Boot] [PATCH 25/25] x86: Add a README.x86 for U-Boot on x86 support
2014-12-15 22:34 UTC (2+ messages)
[U-Boot] [PATCH 15/25] x86: Add a simple command to show FSP HOB information
2014-12-15 22:34 UTC (2+ messages)
[U-Boot] [PATCH v2] arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)
2014-12-15 22:34 UTC (2+ messages)
[U-Boot] Falcon mode boot support
2014-12-15 22:08 UTC (3+ messages)
[U-Boot] [PATCH] memmove_wd: copy chunk down from big address if parameter to is larger than from
2014-12-15 21:22 UTC (2+ messages)
[U-Boot] [PATCH v2] arm: build arch memset/memcpy in Thumb2 mode
2014-12-15 21:06 UTC (5+ messages)
[U-Boot] [PATCH v3] common/board_f.c: fix compile error when tracing disabled
2014-12-15 20:07 UTC
[U-Boot] [PATCH v2] common/board_f.c: fix compile error when tracing disabled
2014-12-15 19:31 UTC
[U-Boot] [PATCH V4 1/3] usb: eth: fix Makefile
2014-12-15 18:50 UTC (3+ messages)
` [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER
[U-Boot] [PATCH 0/2] Consolidate asmlinkage defines
2014-12-15 18:27 UTC (3+ messages)
` [U-Boot] [PATCH 2/2] ARM: remove redundant asmlinkage define
[U-Boot] [PATCH 1/2] x86: move arch-specific asmlinkage to <asm/linkage.h>
2014-12-15 18:26 UTC (5+ messages)
[U-Boot] [PATCH v3 0/27] x86: Add Intel Queensbay platform support
2014-12-15 18:26 UTC (35+ messages)
` [U-Boot] [PATCH v3 01/27] x86: Make ROM_SIZE configurable in Kconfig
` [U-Boot] [PATCH v3 02/27] tools/ifdtool: Support writing multiple files (-w) simultaneously
` [U-Boot] [PATCH v3 03/27] x86: Refactor u-boot.rom build rules
` [U-Boot] [PATCH v3 04/27] x86: Clean up asm-offsets
` [U-Boot] [PATCH v3 05/27] x86: ich6-gpio: Move setup_pch_gpios() to board support codes
` [U-Boot] [PATCH v3 06/27] x86: Add Intel Crown Bay board dts file
` [U-Boot] [PATCH v3 07/27] x86: Add a simple superio driver for SMSC LPC47M
` [U-Boot] [PATCH v3 08/27] x86: Add Intel Topcliff PCH device IDs
` [U-Boot] [PATCH v3 09/27] x86: ich-spi: Add Intel Tunnel Creek SPI controller support
` [U-Boot] [PATCH v3 10/27] x86: Initial import from Intel FSP release for Queensbay platform
` [U-Boot] [PATCH v3 11/27] x86: queensbay: Adapt FSP support codes
` [U-Boot] [PATCH v3 12/27] x86: Add post failure codes for bist and car
` [U-Boot] [PATCH v3 13/27] x86: Support Intel FSP initialization path in start.S
` [U-Boot] [PATCH v3 14/27] x86: Add a simple command to show FSP HOB information
[U-Boot] Fastboot and MUSB driver on OMAP3
2014-12-15 17:06 UTC (2+ messages)
[U-Boot] Pull request: u-boot-mmc 12122014
2014-12-15 17:01 UTC (2+ messages)
[U-Boot] [PATCH] qe/deep-sleep: modify qe deep-sleep for generic board
2014-12-15 16:52 UTC (2+ messages)
[U-Boot] m68k: Build problems on some boards
2014-12-15 16:46 UTC (4+ messages)
[U-Boot] [PATCH 0/26] Start removing non-generic boards
2014-12-15 16:46 UTC (28+ messages)
` [U-Boot] [PATCH 01/26] mpc8xx: remove FPS{850, 860}L, NSCU, SM850, TK885D, virtlab2 support
` [U-Boot] [PATCH 02/26] powerpc: manroland: remove uc100, uc101, mucmc52, hmi1001 support
` [U-Boot] [PATCH 03/26] mpc8xx: remove ELPT860 board support
` [U-Boot] [PATCH 04/26] mpc8xx: remove KUP4X, KUP4K "
` [U-Boot] [PATCH 05/26] mpc8xx: remove SPD823TS "
` [U-Boot] [PATCH 06/26] mpc8xx: remove RRvision "
` [U-Boot] [PATCH 07/26] mpc8xx: remove R360MPI "
` [U-Boot] [PATCH 08/26] mpc8xx: remove NETVIA "
` [U-Boot] [PATCH 09/26] mpc8xx: remove lwmon "
` [U-Boot] [PATCH 10/26] mpc8xx: remove IVMS8, IVML24 "
` [U-Boot] [PATCH 11/26] mpc8xx: remove IP860 "
` [U-Boot] [PATCH 12/26] mpc8xx: remove ESTEEM192E "
` [U-Boot] [PATCH 13/26] powerpc: remove cogent_8xx, cogent_mpc8260 "
` [U-Boot] [PATCH 14/26] mpc8260: remove sacsng "
` [U-Boot] [PATCH 15/26] mpc8260: remove ppmc8260 "
` [U-Boot] [PATCH 16/26] mpc8260: remove ep8260 "
` [U-Boot] [PATCH 17/26] mpc8260: remove VoVPN-GW "
` [U-Boot] [PATCH 18/26] mpc8260: remove MPC8266ADS "
` [U-Boot] [PATCH 19/26] mpc8260: remove PM825, PM826, PM828 "
` [U-Boot] [PATCH 20/26] mpc8260: remove muas3001 "
` [U-Boot] [PATCH 21/26] mpc8260: remove IPHASE4539 "
` [U-Boot] [PATCH 22/26] mpc8260: remove gw8260 "
` [U-Boot] [PATCH 23/26] mpc8260: remove ep82xxm "
` [U-Boot] [PATCH 24/26] mpc8260: remove CPU86, CPU87 "
` [U-Boot] [PATCH 25/26] mpc8260: remove atc "
` [U-Boot] [PATCH 26/26] powerpc: mpc824x: remove MPC824X cpu support
[U-Boot] Falcon mode boot support
2014-12-15 16:20 UTC
[U-Boot] [PATCH 0/2] sun7i: PSCI enhancements
2014-12-15 15:48 UTC (6+ messages)
` [U-Boot] [PATCH 1/2] sun7i: Add support for taking CPUs offline via PSCI
` [U-Boot] [PATCH 2/2] sun7i: Add PSCI v0.2 support
[U-Boot] [PATCH 01/10] net/fm: Fix error when FMAN MAC has no PHY
2014-12-15 15:37 UTC (10+ messages)
` [U-Boot] [PATCH 02/10] arch/powerpc: Add SGMII support for the L2 Switch ports
` [U-Boot] [PATCH 03/10] net/fm: Enable FMAN ports if l2switch ports are connected over SGMII
` [U-Boot] [PATCH 04/10] net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IP
` [U-Boot] [PATCH 05/10] arch/powerpc: Enable VSC9953 driver on T1040 and T1020
` [U-Boot] [PATCH 06/10] board/T1040qds: Fix lane-to-slot mapping for SerDes protocol 0x89
` [U-Boot] [PATCH 07/10] board/T1040qds: T1040 FMAN ports FM1@DTSEC1 and FM1@DTSEC2 have no PHYs
` [U-Boot] [PATCH 08/10] board/T104xrdb: "
` [U-Boot] [PATCH 09/10] board/T1040qds: Add VSC9953 support for T1040qds board
` [U-Boot] [PATCH 10/10] board/T1040rdb: Add VSC9953 support for T1040rdb board
[U-Boot] A23 u-boot with SPL / dram init available in my personal git repo
2014-12-15 14:59 UTC (12+ messages)
` [U-Boot] [linux-sunxi] "
[U-Boot] [PATCH 1/2] arm: ls102xa: Add dummy gpio.h to enable CONFIG_OF_CONTROL
2014-12-15 14:40 UTC (3+ messages)
[U-Boot] [PATCH v3 0/9] sf: Update flash params for supported read commands and sector size
2014-12-15 13:51 UTC (6+ messages)
[U-Boot] [PATCH V3 00/12] cleanup and refactor lcd.c
2014-12-15 12:02 UTC (2+ messages)
[U-Boot] [PATCH] allow config_distro_bootcmd to pass uuid to extlinux.conf
2014-12-15 11:53 UTC (5+ messages)
[U-Boot] [PATCH v2 1/1] ARM: kirkwood: mvebu_mmc: Speed up access time
2014-12-15 11:14 UTC (3+ messages)
` [U-Boot] [PATCH v3 0/6] "
[U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number
2014-12-15 11:14 UTC (6+ messages)
[U-Boot] [PATCH] USB: gadget: atmel_usba_udc: fix transfer hang issue
2014-12-15 10:12 UTC
[U-Boot] [PATCH 3/3 v2] arm: semihosting: get rid of forward declarations
2014-12-15 10:06 UTC
[U-Boot] [PATCH 2/3 v2] arm: semihosting: fix up compile bugs
2014-12-15 10:05 UTC
[U-Boot] [PATCH 1/3 v2] arm: semihosting: staticize internal functions
2014-12-15 10:05 UTC
[U-Boot] [PATCH 1/2] dfu: mmc: check if mmc device exists in mmc_block_op()
2014-12-15 9:34 UTC (4+ messages)
` [U-Boot] [Patch V2 1/3] "
` [U-Boot] [Patch V2 2/3] gadget: f_thor: check pointers before use in download_tail()
` [U-Boot] [Patch V2 3/3] dfu: dfu_get_buf: check the value of env dfu_bufsiz before use
[U-Boot] [PATCH v2 00/18] Support for eMMC partitioning and related fixes
2014-12-15 9:32 UTC (3+ messages)
[U-Boot] [PATCH v3 00/18] Support for eMMC partitioning and related fixes
2014-12-15 9:27 UTC (19+ messages)
` [U-Boot] [PATCH v3 01/18] mmc: show hardware partition sizes in mmcinfo output
` [U-Boot] [PATCH v3 02/18] mmc: extend mmcinfo to show enhanced partition attribute
` [U-Boot] [PATCH v3 03/18] mmc: make eMMC general purpose partition numbering match spec
` [U-Boot] [PATCH v3 04/18] mmc: skip mmcinfo partition info processing for eMMC < 4.41
` [U-Boot] [PATCH v3 05/18] mmc: incomplete test to switch to high-capacity group size definitions
` [U-Boot] [PATCH v3 06/18] mmc: computation of eMMC GP partition size was missing 512 KiB factor
` [U-Boot] [PATCH v3 07/18] mmc: read the size of eMMC enhanced user data area
` [U-Boot] [PATCH v3 08/18] mmc: display size and start of eMMC enhanced user data area in mmcinfo
` [U-Boot] [PATCH v3 09/18] mmc: fix erase_grp_size computation with high-capacity size definition
` [U-Boot] [PATCH v3 10/18] mmc: read the high capacity WP group size for eMMC
` [U-Boot] [PATCH v3 11/18] mmc: show the erase group size and HC WP group size in mmcinfo output
` [U-Boot] [PATCH v3 12/18] mmc: eMMC partitioning data is not effective till partitioning completed
` [U-Boot] [PATCH v3 13/18] mmc: the ext_csd data may be used during init even if reading failed
` [U-Boot] [PATCH v3 14/18] mmc: add API to do eMMC hardware partitioning
` [U-Boot] [PATCH v3 15/18] mmc: add mmc hwpartition sub-command "
` [U-Boot] [PATCH v3 16/18] mmc: extend the mmc hardware partitioning API with write reliability
` [U-Boot] [PATCH v3 17/18] mmc: extend the mmc hwpartition sub-command to change "
` [U-Boot] [PATCH v3 18/18] mmc: extend mmcinfo output to show partition write reliability settings
[U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
2014-12-15 9:01 UTC (4+ messages)
[U-Boot] [PATCH] mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoC
2014-12-15 8:13 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox