messages from 2015-05-26 12:27:22 to 2015-05-28 09:54:21 UTC [more...]
[U-Boot] [PATCH 1/5] warp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE
2015-05-28 9:54 UTC (7+ messages)
` [U-Boot] [PATCH 2/5] warp: Fix CONFIG_SYS_FSL_ESDHC_ADDR
` [U-Boot] [PATCH 3/5] warp: Enable CONFIG_SUPPORT_EMMC_BOOT
` [U-Boot] [PATCH 4/5] warp: Add fuse command support
` [U-Boot] [PATCH 5/5] warp: Fix the 'saveenv' command
[U-Boot] [PATCH] sunxi/spl: Detect at runtime where SPL was read from
2015-05-28 9:52 UTC (3+ messages)
[U-Boot] [PATCH] mx6_common: Fix LOADADDR and SYS_TEXT_BASE for MX6SL and MX6SX
2015-05-28 9:52 UTC (3+ messages)
[U-Boot] [PATCH] pci: imx: display message if no pcie link
2015-05-28 9:45 UTC (4+ messages)
[U-Boot] [PATCH v3] armv8: caches: Added routine to set non cacheable region
2015-05-28 9:39 UTC (2+ messages)
[U-Boot] [PATCH 01/22][v2] armv8/ls2085ardb: Add eth & phy f/w loading support
2015-05-28 9:24 UTC (22+ messages)
` [U-Boot] [PATCH 02/22][v2] armv8/ls2085ardb: add hwconfig setting for eSDHC
` [U-Boot] [PATCH 03/22][v2] armv8/ls2085a: Enable Date command for QDS and RDB
` [U-Boot] [PATCH 04/22][v2] armv8/ls2085aqds: Add support of SerDes protocol 0x49
` [U-Boot] [PATCH 05/22][v2] armv8/ls2085a: Update LS2085a PCIe compatible
` [U-Boot] [PATCH 06/22][v2] armv8/ls2085a: call ft_pcie_setup() to change dts status
` [U-Boot] [PATCH 07/22][v2] armv8/ls2085qds: Update SFP TX bit as "0" to enable XFI
` [U-Boot] [PATCH 08/22][v2] armv8/ls2085rdb: Update PCA9547PW slave address
` [U-Boot] [PATCH 09/22][v2] armv8/ls2085a: Increase the supported kernel size
` [U-Boot] [PATCH 10/22][v2] board/fsl/common: Fix eeprom system version endianness
` [U-Boot] [PATCH 11/22][v2] armv8/ls2085RDB: Update board version print logic
` [U-Boot] [PATCH 12/22][v2] armv8/fsl-lsch3: Fix DDR speed message
` [U-Boot] [PATCH 13/22][v2] armv8/fsl-ch3: Add support to print SoC personality
` [U-Boot] [PATCH 14/22][v2] armv8/ls2085a: Avoid hard-coding for board name print
` [U-Boot] [PATCH 15/22][v2] driver/ddr/fsl: Add a hook to update SPD address
` [U-Boot] [PATCH 16/22][v2] armv8/ls2085ardb: Fix SPD address error on early boards
` [U-Boot] [PATCH 17/22][v2] armv8/ls2085a: Expose all DDR region(s) to Linux
` [U-Boot] [PATCH 18/22][v2] armv8/ls2085a: Update SoC README for DDR layout
` [U-Boot] [PATCH 19/22][v2] driver/fsl_debug_server: Fix the DDR hide logic for LS2085a
` [U-Boot] [PATCH 20/22][v2] arm/errata: Update required bits for A57 cores erratas
` [U-Boot] [PATCH 21/22][v2] armv8/fsl-lsch3: Support 256M mem split for MC & dbg-srvr
` [U-Boot] [PATCH 22/22][v2] armv8/ls2085a: enable debug server
[U-Boot] [PATCH 1/4] zynqmp: gem: Set data bus with to 64bit for arm64
2015-05-28 7:01 UTC (3+ messages)
[U-Boot] [PATCH v2 1/4] zynqmp: gem: Set data bus width to 64bit for arm64
2015-05-28 7:00 UTC (4+ messages)
` [U-Boot] [PATCH v2 2/4] zynqmp: gem: Flush the rx buffers while transmitting
` [U-Boot] [PATCH v2 3/4] zynq: gem: Increase the Rx buffer descriptors to 32
` [U-Boot] [PATCH v2 4/4] zynq: gem: Setting up WRAP bit for one TX bd
[U-Boot] [PATCH] board: add support for Vision System's Baltos Industrial PC
2015-05-28 6:55 UTC (3+ messages)
` [U-Boot] "
[U-Boot] [PATCH] imx: missing CONFIG_NET after consolidation patches
2015-05-28 5:28 UTC (2+ messages)
[U-Boot] [PATCH v2] am33xx, spl, siemens: enable debug uart output again
2015-05-28 5:27 UTC
[U-Boot] Regarding learning reference of uboot loading secondary uboot
2015-05-28 3:41 UTC (2+ messages)
[U-Boot] [PATCH] x86: Fix regression build issue of coreboot-x86_defconfig
2015-05-28 3:10 UTC (11+ messages)
[U-Boot] [PATCH 0/3] stv0991: enable cadence qspi controller & spi flash
2015-05-28 1:42 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] stv0991: configure clock & pad muxing for qspi
` [U-Boot] [PATCH 2/3] stv0991: enable cadence qspi controller & spi flash
` [U-Boot] [PATCH 3/3] stv0991: configure device tree for cadence qspi & flash
[U-Boot] [PATCH v3 1/4] Kconfig: Enable usage of escape char '\' in string values
2015-05-27 21:58 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH 1/1] board: Add Toby-Churchill SL50 board support
2015-05-27 21:55 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] Proposal to add NAND-boot support for Sunxi SPL
2015-05-27 20:19 UTC (14+ messages)
` [U-Boot] [linux-sunxi] "
[U-Boot] soft-i2c and i2c-gpio issues with at91
2015-05-27 19:21 UTC (9+ messages)
[U-Boot] [PATCH 2/6] x86: qemu: Adjust VGA initialization
2015-05-27 17:47 UTC (20+ messages)
` [U-Boot] [PATCH 3/6] x86: coreboot: Don't write I/O port 0xb2 for QEMU targets
` [U-Boot] [PATCH 4/6] x86: coreboot: Fix cosmetic issues
` [U-Boot] [PATCH 5/6] x86: qemu: Create i440fx and q35 board configuration and device tree
` [U-Boot] [PATCH 6/6] x86: qemu: Implement PIRQ routing
[U-Boot] [PATCH 1/2] Move setexpr to Kconfig
2015-05-27 17:42 UTC (2+ messages)
` [U-Boot] [U-Boot,1/2] "
[U-Boot] pull request: u-boot-uniphier/misc
2015-05-27 17:09 UTC (2+ messages)
[U-Boot] Pull request: u-boot-net.git master
2015-05-27 16:17 UTC (3+ messages)
[U-Boot] [PATCH v2 3/6] x86: Make QEMU the default vendor
2015-05-27 16:11 UTC (8+ messages)
[U-Boot] [PATCH] kbuild: define DO_DEPS_ONLY for u-boot.cfg to fix build error
2015-05-27 15:55 UTC (2+ messages)
[U-Boot] Falcon mode with initrd
2015-05-27 15:49 UTC (2+ messages)
[U-Boot] [PATCH] kconfiglib: sync with the latest in Kconfiglib project
2015-05-27 15:33 UTC (2+ messages)
[U-Boot] [PATCH 01/20] armv8/ls2085ardb: Add eth & phy f/w loading support
2015-05-27 15:27 UTC (10+ messages)
` [U-Boot] [PATCH 04/20] armv8/ls2085aqds: Add support of 0x49 in ethernet
` [U-Boot] [PATCH 05/20] armv8/ls2085a: call ft_pcie_setup() to change dts status
` [U-Boot] [PATCH 07/20] armv8/ls2085rdb: Update PCA9547PW slave address
[U-Boot] [PATCH v2 0/22] x86: Add bare support for Intel Minnowboard Max
2015-05-27 14:39 UTC (7+ messages)
` [U-Boot] [PATCH v2 22/22] x86: Add "
[U-Boot] [PATCH] pci: display header for bus scan
2015-05-27 13:24 UTC (2+ messages)
[U-Boot] [PATCH] env_mmc: add error message to pass to set_default_env
2015-05-27 13:18 UTC (2+ messages)
[U-Boot] FW: eTSEC0 internal loopback test
2015-05-27 12:03 UTC
[U-Boot] [PATCH] x86: baytrail: PCI is not always mapped to end of ram
2015-05-27 11:53 UTC (5+ messages)
[U-Boot] [PATCH] vexpress64: let Juno wait for root device
2015-05-27 7:48 UTC (2+ messages)
[U-Boot] [PATCH] vexpress64: fix various memory issues
2015-05-27 7:47 UTC (2+ messages)
[U-Boot] [PATCH] vexpress64: use uncompressed kernel by default
2015-05-27 7:45 UTC
[U-Boot] cpsw not working with slave2 port defined only
2015-05-27 6:54 UTC (4+ messages)
[U-Boot] [PATCH 0/10 v3] i.MX6: move duplicated options to mx6_common to standardise mx6 config
2015-05-27 6:26 UTC (7+ messages)
[U-Boot] [PATCH v2 0/2] kbuild: create a symbolic link only when necessary
2015-05-27 6:09 UTC (3+ messages)
` [U-Boot] [PATCH v2 1/2] nds32: include <asm/arch-*/*.h> instead of <asm/arch/*.h>
` [U-Boot] [PATCH v2 2/2] kbuild: create symbolic link only for ARM, SPARC, PowerPC, x86
[U-Boot] [PATCH] net: designware: fix driver name
2015-05-27 5:57 UTC
[U-Boot] [PATCH v2 0/7] UniPhier updates for v2015.07-rc2
2015-05-27 5:35 UTC (8+ messages)
` [U-Boot] [PATCH v2 1/7] ARM: UniPhier: use 32 bit register access for debug UART setting
` [U-Boot] [PATCH v2 2/7] ARM: UniPhier: remove unnecessary cache coherency code
` [U-Boot] [PATCH v2 3/7] ARM: UniPhier: remove meaningless CONFIG_SPL_BUILD ifdefs
` [U-Boot] [PATCH v2 4/7] ARM: UniPhier: move CONFIG_SYS_TEXT_BASE to Kconfig
` [U-Boot] [PATCH v2 5/7] ARM: UniPhier: set MACH_PH1_PRO4 as default SoC
` [U-Boot] [PATCH v2 6/7] ARM: UniPhier: enable CONFIG_NET_RANDOM_ETHADDR
` [U-Boot] [PATCH v2 7/7] ARM: UniPhier: update DDR PHY register map for PH1-Pro5
[U-Boot] [PATCH v2 3/3] x86: qemu: Add graphics support
2015-05-27 4:02 UTC (5+ messages)
[U-Boot] [PATCH 1/6] x86: qemu: Enable legacy IDE I/O ports decode
2015-05-27 3:13 UTC (2+ messages)
[U-Boot] [PATCH 0/5] UniPhier updates for v2015.07-rc2
2015-05-27 1:49 UTC (6+ messages)
` [U-Boot] [PATCH 1/5] ARM: UniPhier: use 32 bit register access for debug UART setting
` [U-Boot] [PATCH 2/5] ARM: UniPhier: remove unnecessary cache coherency code
` [U-Boot] [PATCH 3/5] ARM: UniPhier: remove meaningless CONFIG_SPL_BUILD ifdefs
` [U-Boot] [PATCH 4/5] ARM: UniPhier: move CONFIG_SYS_TEXT_BASE to Kconfig
` [U-Boot] [PATCH 5/5] ARM: UniPhier: update DDR PHY register map for PH1-Pro5
[U-Boot] [PATCH v4] tools: moveconfig: a tool to move CONFIGs from headers to defconfigs
2015-05-27 0:43 UTC (3+ messages)
[U-Boot] [PATCH v4 01/10] moveconfig: Always run savedefconfig on the moved config
2015-05-26 23:43 UTC (3+ messages)
` [U-Boot] [PATCH v5 1/9] "
[U-Boot] [PATCH v2] wandboard: Add board revision detection support
2015-05-26 22:11 UTC (13+ messages)
[U-Boot] [PATCH V4] Add Sunxi NAND support to SPL
2015-05-26 21:24 UTC (6+ messages)
` [U-Boot] [PATCH V4 1/4] sunxi/nand: change BLOCK_SIZE in mksunxiboot to match NAND block size
` [U-Boot] [PATCH V4 2/4] sunxi: Add DMA definitions
` [U-Boot] [PATCH V4 3/4] sunxi: Match sun4i, sun6i, sun9i CCI definitions for NAND and DMA
` [U-Boot] [PATCH V4 4/4] sunxi/nand: Add support for booting from internal NAND memory
[U-Boot] [PATCH v2 1/4] x86: Refactor PIRQ routing support
2015-05-26 20:58 UTC (2+ messages)
[U-Boot] [PATCH] net: Fix NET_RANDOM_ETHADDR dependencies
2015-05-26 18:35 UTC (2+ messages)
[U-Boot] [PATCH] sparc: fix build error on gr_ep2s60 board
2015-05-26 18:35 UTC (3+ messages)
[U-Boot] [PATCH] blackfin: fix build error on bct-brettl2 board
2015-05-26 18:35 UTC (3+ messages)
[U-Boot] [PATCH 0/5] imx: ventana: various cleanups
2015-05-26 18:04 UTC (6+ messages)
` [U-Boot] [PATCH 1/5] imx: ventana: various board-specific GPIO config updates
` [U-Boot] [PATCH 2/5] imx: ventana: make model env var automatic and non-overridable
` [U-Boot] [PATCH 3/5] imx: ventana: make fdt_file1 and fdt_file2 "
` [U-Boot] [PATCH 4/5] imx: ventana: hang if board model could not be determined
` [U-Boot] [PATCH 5/5] imx: ventana: skip mtdparts fixup if no flash
[U-Boot] [PATCH] imx: drop warning: unused variable 'max_freq'
2015-05-26 17:56 UTC
[U-Boot] [PULL] Please pull u-boot-imx
2015-05-26 17:37 UTC (2+ messages)
[U-Boot] [GIT PULL] Zynq changes
2015-05-26 17:36 UTC (2+ messages)
[U-Boot] [PATCH] mx6: invalidate D-cache only when booting from USB
2015-05-26 17:08 UTC (3+ messages)
[U-Boot] [PATCH] sandbox: Compile test device tree when CONFIG_UT_DM is defined
2015-05-26 17:03 UTC (3+ messages)
[U-Boot] [PATCH 1/4] dm: Sort the uclass IDs after the tegra/PMIC addition
2015-05-26 17:03 UTC (11+ messages)
` [U-Boot] [PATCH 2/4] sandbox: dts: Sort the test.dts file a little
` [U-Boot] [PATCH 3/4] sandbox: dts: Sort the sandbox.dts file
` [U-Boot] [PATCH 4/4] sandbox: dts: Add the real-time-clock test nodes back in
[U-Boot] [PATCH 19/20] armv8/fsl-lsch3: Support 256M mem split for MC & dbg-srvr
2015-05-26 16:13 UTC (2+ messages)
[U-Boot] [PATCH 17/20] driver/fsl_debug_server: Fix the DDR hide logic for LS2085a
2015-05-26 16:10 UTC (2+ messages)
[U-Boot] [PATCH 08/20] armv8/ls2085a: Increase the supported kernel size
2015-05-26 16:05 UTC (2+ messages)
[U-Boot] [PATCH] fdt: Documentation for a few support functions aside their prototypes
2015-05-26 15:15 UTC (2+ messages)
[U-Boot] [PATCH 0/4] x86: support of pin-muxing from device tree
2015-05-26 14:41 UTC (7+ messages)
` [U-Boot] [PATCH v3 4/4] x86: minnowmax: initialize the "
[U-Boot] [PATCH] spl: spl_mmc: fix mmc Falcon mode regression
2015-05-26 12:27 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox