messages from 2015-06-25 17:55:19 to 2015-06-29 02:05:01 UTC [more...]
[U-Boot] [PATCH v2 1/8] imx: mx6 correct is_soc_rev usage
2015-06-29 2:05 UTC (18+ messages)
` [U-Boot] [PATCH v2 2/8] imx: mx6 correct get_cpu_rev
` [U-Boot] [PATCH v2 3/8] imx: mx6 introuduce macro is_mx6dqp
` [U-Boot] [PATCH v2 4/8] imx: mx6: ccm: Change the clock settings for i.MX6QP
` [U-Boot] [PATCH v2 6/8] imx: mx6qp Enable PRG clock and AQoS setting for IPU
` [U-Boot] [PATCH v2 7/8] imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support
` [U-Boot] [PATCH v2 8/8] imx: mx6qp: Adjust AQos settings for peripherals
[U-Boot] [PATCH V2 1/2] imx: mx6 remove duplicated enable_cspi_clock
2015-06-29 1:33 UTC (5+ messages)
` [U-Boot] [PATCH V2 2/2] imx: mx6 add i2c4 clock support for i.MX6SX
[U-Boot] USE_HOSTCC in lib/rsa/rsa-verify.c
2015-06-29 1:03 UTC
[U-Boot] Please pull u-boot-marvell master
2015-06-29 0:36 UTC (2+ messages)
[U-Boot] [PATCH] net: lpc32xx: connect MAC to phy with CONFIG_PHY_ADDR id
2015-06-29 0:35 UTC
[U-Boot] [PATCH 0/2] sunxi: musb: Fix "usb reset" handling
2015-06-28 20:42 UTC (6+ messages)
[U-Boot] [PATCH v2 05/20] sf: Kconfig: Update SPI_FLASH entry
2015-06-28 19:32 UTC
[U-Boot] Setting up vexpress u-boot for distro configs and use in virt
2015-06-28 19:27 UTC (5+ messages)
` [U-Boot] [PATCH 1/3] PXE: if a board has set its own value for CONFIG_BOOTP_VCI_STRING do not set the default one. Use the board set value instead
` [U-Boot] [PATCH 2/3] Move setting CONFIG_BOOTP_VCI_STRING to before including the vexpress-common header
` [U-Boot] [PATCH 3/3] port vexpress to use distro boot commands
[U-Boot] [PATCH v2] Initial support for ACPI Tables for qemu-x86 target
2015-06-28 17:08 UTC (6+ messages)
[U-Boot] Minor i.MX6 updates
2015-06-28 16:32 UTC (16+ messages)
` [U-Boot] [PATCH 1/7] Drop duplicate CONFIG_SYS_NO_FLASH from mx6_common
` [U-Boot] [PATCH 2/7] mx6cuboxi: drop options that are duplicated in mx6_common
` [U-Boot] [PATCH 3/7] imx6: standardise OCOTP and fuse config to mx6_common
` [U-Boot] [PATCH 4/7] imx6: define CONFIG_IMX6_THERMAL as a default option
[U-Boot] Please pull u-boot-sunxi master (fixes for v2015.07)
2015-06-28 16:06 UTC (4+ messages)
[U-Boot] [PATCH v3 0/4] arm: mvebu: Allow DB-88F6820-GP to boot Linux
2015-06-28 16:00 UTC (4+ messages)
` [U-Boot] [PATCH v3 3/4] mv-common.h: Include support for device trees
[U-Boot] FEL mode broken since "sunxi: Move all boards to the driver-model"
2015-06-28 15:28 UTC (2+ messages)
[U-Boot] [PATCH] imx: imximage: add new CHECK/CLR BIT command
2015-06-28 11:00 UTC (2+ messages)
[U-Boot] [v2 0/6] stv0991: enable cadence qspi controller & spi flash
2015-06-28 10:57 UTC (4+ messages)
` [U-Boot] [v2 6/6] stv0991: configure device tree for cadence qspi & flash
[U-Boot] [PATCH 0/20] tegra: Expand Nyan-big support
2015-06-28 9:48 UTC
[U-Boot] [PATCH] board/ls2085rdb: Export functions for standalone AQ FW load apps
2015-06-28 5:33 UTC
[U-Boot] [PATCH 01/12][v3] drivers/fsl-mc: Make MC boot error messages more readable
2015-06-28 4:39 UTC (12+ messages)
` [U-Boot] [PATCH 02/12][v3] driver/ldpaa_eth:Flush buffer before seeding BMAN after TX_conf
` [U-Boot] [PATCH 03/12][v3] drivers/fsl-mc: Autoload AOIP image from NOR flash
` [U-Boot] [PATCH 04/12][v3] drivers: fsl-mc: Update flibs to mc-0.6.0.1
` [U-Boot] [PATCH 05/12][v3] drivers: fsl-mc: Update qbman driver
` [U-Boot] [PATCH 06/12][v3] drivers: fsl-mc: Return error for major version mismatch
` [U-Boot] [PATCH 07/12][v3] armv8/fsl-lsch3: partition stream IDs
` [U-Boot] [PATCH 08/12][v3] drivers/fsl-mc: dynamically create ICID pool in DPC
` [U-Boot] [PATCH 09/12][v3] armv8/fsl-lsch3: device tree fixups for PCI stream IDs
` [U-Boot] [PATCH 10/12][v3] driver/ldpaa_eth: Retry enqueue if portal was busy
` [U-Boot] [PATCH 11/12][v3] driver/ldpaa_eth: Add timeout handling DQRR entry read
` [U-Boot] [PATCH 12/12][v3] driver/ldpaa_eth: Avoid TX conf frames
[U-Boot] [PATCH] net: lpc32xx: correct command register reset value
2015-06-28 3:03 UTC
[U-Boot] [PATCH v7 0/5] sf: Add dataflash support
2015-06-27 18:36 UTC (8+ messages)
` [U-Boot] [PATCH 1/5] dm: sf: Add Atmel DataFlash spi flash driver
` [U-Boot] [PATCH 2/5] dm: ls1021aqds: dts: Use "spi_dataflash" driver instead of "spi_flash_std" for DSPI flash
` [U-Boot] [PATCH 3/5] arm: ls102xa: Enable Driver Model SPI for ls1021aqds
` [U-Boot] [PATCH 4/5] arm: ls102xa: Enable Driver Model SPI for ls1021atwr
` [U-Boot] [PATCH 5/5] defconfig: ls1021a: Add OF_CONTROL and DM support
[U-Boot] [PATCH 00/20] spi/sf: Kconfig updates
2015-06-27 18:14 UTC (21+ messages)
` [U-Boot] [PATCH 01/20] sf: dataflash: Rename to CONFIG_SPI_FLASH_DATAFLASH
` [U-Boot] [PATCH 02/20] README: Add CONFIG_SPI_FLASH_DATAFLASH description
` [U-Boot] [PATCH 03/20] sf: Add Kconfig menu entry
` [U-Boot] [PATCH 04/20] common: Add CMD_SF Kconfig entry
` [U-Boot] [PATCH 05/20] sf: Kconfig: Update SPI_FLASH entry
` [U-Boot] [PATCH 06/20] sf: Kconfig: Add SPI_FLASH_MTD entry
` [U-Boot] [PATCH 07/20] sf: Kconfig: Add SPI_FLASH_DATAFLASH entry
` [U-Boot] [PATCH 08/20] spi: Add Kconfig menu entry
` [U-Boot] [PATCH 09/20] spi: Kconfig: Add XILINX_SPI entry
` [U-Boot] [PATCH 10/20] spi: Kconfig: Add TI_QSPI entry
` [U-Boot] [PATCH 11/20] spi: Makefile: Use object file alphabetic order
` [U-Boot] [PATCH 12/20] spi: Kconfig: Show dm-spi drivers if DM_SPI set
` [U-Boot] [PATCH 13/20] spi: Kconfig: Add FSL_DSPI entry
` [U-Boot] [PATCH 14/20] spi: Kconfig: Add FSL_ESPI entry
` [U-Boot] [PATCH 15/20] spi: Kconfig: Add FSL_QSPI entry
` [U-Boot] [PATCH 16/20] spi: Kconfig: Add EXYNOS_SPI entry
` [U-Boot] [PATCH 17/20] spi: Kconfig: Add ICH_SPI entry
` [U-Boot] [PATCH 18/20] spi: Kconfig: Add TEGRA114_SPI entry
` [U-Boot] [PATCH 19/20] spi: Kconfig: Add TEGRA20_SFLASH entry
` [U-Boot] [PATCH 20/20] spi: Kconfig: Add TEGRA20_SLINK entry
[U-Boot] [PATCH 0/2] ARM: ts4800: add board support
2015-06-27 17:35 UTC (3+ messages)
` [U-Boot] [PATCH 1/2] ARM: ts4800: add basic "
[U-Boot] [PATCH v2 0/5] arm: imx6: tqma6: Kconfig rework
2015-06-27 16:04 UTC (3+ messages)
[U-Boot] [PATCH v2 00/16] tegra: Expand Nyan-big support
2015-06-27 7:39 UTC (4+ messages)
[U-Boot] [PATCH 0/3] nand: Sync with Linux v4.1
2015-06-27 6:16 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] nand: Remove __UBOOT__ ifdefs
` [U-Boot] [PATCH 2/3] mtd: Introduce mtd_block_isreserved()
` [U-Boot] [PATCH 3/3] nand: Sync with Linux v4.1
[U-Boot] dm-spi: spi_chip_select value
2015-06-26 23:02 UTC (4+ messages)
[U-Boot] [PATCH] sunxi: Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR by default
2015-06-26 21:16 UTC (23+ messages)
` [U-Boot] [PATCH 0/7] Move include/config_cmd_default.h into Kconfig / remove arch defaults
` [U-Boot] [PATCH 1/7] mtd: spi: Add the SPI_FLASH config to Kconfig
` [U-Boot] [PATCH 2/7] common: Fix comment for saveenv in Kconfig
` [U-Boot] [PATCH 3/7] common: Add the CMD_ENV_EXISTS config to Kconfig
` [U-Boot] [PATCH 4/7] arm: Make new baltos board not break on savedefconfig
` [U-Boot] [PATCH 5/7] a3m071: Add needed dependency on LIB_RAND
` [U-Boot] [PATCH 6/7] Move default y configs out of arch/board Kconfig
` [U-Boot] [PATCH 7/7] Move defaults from config_cmd_default.h to Kconfig
[U-Boot] [PATCH] mmc: bcm2835_sdhci: Restore original delay behavior
2015-06-26 21:04 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCHv4 0/3] drivers/ddr/altera: Add the DDR controller driver for SoCFPGA
2015-06-26 20:01 UTC (3+ messages)
[U-Boot] [PATCH] sf: update sst25wf040b flash params
2015-06-26 19:35 UTC (2+ messages)
[U-Boot] [PATCH v3 00/16] spi/sf: Cleansup and driver model
2015-06-26 19:27 UTC (18+ messages)
` [U-Boot] [PATCH v3 01/16] spi: Zap andes_spi driver
` [U-Boot] [PATCH v3 02/16] spi: Zap ftssp010_spi driver
` [U-Boot] [PATCH v3 03/16] spi: Zap oc_tiny_spi driver
` [U-Boot] [PATCH v3 04/16] spi: xilinx_spi: Move header code to driver
` [U-Boot] [PATCH v3 05/16] spi: xilinx_spi: Driver clean-up
` [U-Boot] [PATCH v3 06/16] spi: davinci_spi: Move header code to driver
` [U-Boot] [PATCH v3 07/16] spi: davinci_spi: Driver cleanup
` [U-Boot] [PATCH v3 08/16] spi/sf: Minor cleanups
` [U-Boot] [PATCH v3 09/16] dm: spi: zynq_spi: Convert to driver model
` [U-Boot] [PATCH v3 10/16] zynq: Kconfig: Enable dm spi and spi_flash
` [U-Boot] [PATCH v3 11/16] dts: zynq: Add zynq spi controller nodes
` [U-Boot] [PATCH v3 12/16] spi: zynq_spi: Add fdt support in driver
` [U-Boot] [PATCH v3 13/16] dts: zynq: Enable spi1 for zc770_xm010 board
` [U-Boot] [PATCH v3 14/16] dm: spi: xilinx_spi: Convert to driver model
` [U-Boot] [PATCH v3 15/16] spi: xilinx_spi: Add asm/io.h include file
` [U-Boot] [PATCH v3 16/16] spi: Kconfig: Add Zynq SPI controller entry
[U-Boot] [PATCH] arm: imx: Switch Wandboard to use config_distro_bootcmd.h
2015-06-26 19:15 UTC (8+ messages)
[U-Boot] x86: ACPI support suggestion
2015-06-26 15:24 UTC (10+ messages)
[U-Boot] [PATCH] drivers: usb: fsl: Remove LS102XA immap inclusion
2015-06-26 14:34 UTC (2+ messages)
[U-Boot] [PATCH] keystone2: config: update default mtd
2015-06-26 14:17 UTC (3+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] Fwd: Re: sd card not working
2015-06-26 14:08 UTC
[U-Boot] [PATCH v4] armv8: caches: Added routine to set non cacheable region
2015-06-26 12:35 UTC
[U-Boot] [PATCH 2/2] armv8: ls2085ardb: DSPI pin muxing configure through QIXIS CPLD
2015-06-26 11:58 UTC
[U-Boot] [PATCH 1/2] armv8: ls2085aqds: DSPI pin muxing configure through QIXIS
2015-06-26 11:58 UTC
[U-Boot] [PATCH] fdt: armv8: Fix build warnings on armv8
2015-06-26 11:56 UTC
[U-Boot] [PATCH] armv8: ls2085a: Enable DSPI get input clk form 'mxc_get_clock'
2015-06-26 11:56 UTC
[U-Boot] [PATCH 06/12] fdt: armv8: Fix build warnings on armv8
2015-06-26 11:53 UTC
[U-Boot] [PATCH 05/12] armv8: ls2085a: Enable DSPI get input clk form 'mxc_get_clock'
2015-06-26 11:53 UTC
[U-Boot] [PATCH 3/3] dm: dts: ls2085a: Add dts files for LS2085AQDS and LS2085ARDB
2015-06-26 11:48 UTC
[U-Boot] [PATCH 2/3] dm: dts: ls2085a: Add DSPI dts node
2015-06-26 11:48 UTC
[U-Boot] [PATCH 1/3] dm: dts: ls2085a: Bring in ls2085a dts files from linux kernel
2015-06-26 11:48 UTC
[U-Boot] [PATCH 4/4][v2] config: ls2085ardb: Add USB support for ls2085ardb
2015-06-26 11:32 UTC
[U-Boot] [PATCH 3/4][v2] config: ls2085aqds: Add USB support for ls2085aqds
2015-06-26 11:32 UTC
[U-Boot] [PATCH 2/4][v2] config: lsch3: Define USB XHCI controller base address for LS2085A
2015-06-26 11:31 UTC
[U-Boot] [PATCH v2 5/5] armv7: ls1021a: Enable OF_CONTROL and DM support for DSPI and QSPI in defconfig
2015-06-26 11:31 UTC
[U-Boot] [PATCH v4 4/5] arm: ls102xa: Enable Driver Model SPI for ls1021atwr
2015-06-26 11:31 UTC
[U-Boot] [PATCH v4 3/5] arm: ls102xa: Enable Driver Model SPI for ls1021aqds
2015-06-26 11:30 UTC
[U-Boot] [PATCH v2 2/5] dm: ls1021aqds: dts: Use "spi_dataflash" driver instead of "spi_flash_std" for DSPI flash
2015-06-26 11:30 UTC
[U-Boot] [PATCH v6 1/5] dm: sf: Add Atmel DataFlash spi flash driver
2015-06-26 11:30 UTC
[U-Boot] [PATCH 1/4][v2] config: lsch3: Define CONFIG_SYS_CACHELINE_SIZE for LS2085A
2015-06-26 11:29 UTC
[U-Boot] [PATCH] armv7: ls1021a: Enable OF_CONTROL and DM support for DSPI and QSPI in defconfig
2015-06-26 10:36 UTC (2+ messages)
[U-Boot] [PATCH v3 00/25] dm: Introduce Rockchip RK3288 support
2015-06-26 10:23 UTC (7+ messages)
` [U-Boot] [PATCH v3 04/25] mkimage: Allow padding to any length
` [U-Boot] [PATCH v3 05/25] mkimage: Allow the original file size to be recorded
` [U-Boot] [PATCH v3 19/25] rockchip: Add an MMC driver
[U-Boot] [PATCH 0/5] sunxi: misc fixes and SinA33 support
2015-06-26 10:14 UTC (2+ messages)
[U-Boot] [PATCH v3 4/4] arm: ls102xa: Enable Driver Model SPI for ls1021atwr
2015-06-26 8:18 UTC (12+ messages)
[U-Boot] corrupted tags in git://git.denx.de/u-boot ?
2015-06-26 6:12 UTC (7+ messages)
[U-Boot] [PATCH v3 00/54] dm: Introduce new driver model uclasses
2015-06-26 4:49 UTC (7+ messages)
` [U-Boot] [PATCH v3 32/54] mmc: Calculate dwmmc FIFO threshold size if not provided
` [U-Boot] [PATCH v3 50/54] mkimage: Set up a file size parameter and keep it updated
[U-Boot] [Resend: U-Boot PATCH] keystone2: config: update default mtd
2015-06-26 1:03 UTC
[U-Boot] [PATCH 01/14][v2] armv8/ls2085a: define CONFIG_PCI
2015-06-25 23:56 UTC (12+ messages)
` [U-Boot] [PATCH 07/14][v2] drivers: fsl-mc: Return error for major version mismatch
` [U-Boot] [PATCH 11/14][v2] driver/ldpaa_eth: Retry enqueue if portal was busy
` [U-Boot] [PATCH 12/14][v2] driver/ldpaa_eth: Add timeout handling DQRR entry read
` [U-Boot] [PATCH 13/14][v2] driver/ldpaa_eth: Avoid TX conf frames
` [U-Boot] [PATCH 14/14][v2] driver/ldpaa_eth:Avoid infinite loop in QBMAN buf release
[U-Boot] [PATCH 00/11 v2] Add more commands for VSC9953 L2 Switch
2015-06-25 22:42 UTC (18+ messages)
` [U-Boot] [PATCH 03/11 v2] drivers/net/vsc9953: Add default configuration "
` [U-Boot] [PATCH 04/11 v2] drivers/net/vsc9953: Refractor the parser for VSC9953 commands
` [U-Boot] [PATCH 05/11 v2] drivers/net/vsc9953: Add command to show/clear port counters
` [U-Boot] [PATCH 06/11 v2] drivers/net/vsc9953: Add commands to enable/disable HW learning
` [U-Boot] [PATCH 07/11 v2] drivers/net/vsc9953: Add commands to manipulate the FDB for VSC9953
` [U-Boot] [PATCH 08/11 v2] drivers/net/vsc9953: Add VLAN commands "
` [U-Boot] [PATCH 09/11 v2] drivers/net/vsc9953: Add command for shared/private VLAN learning
` [U-Boot] [PATCH 10/11 v2] drivers/net/vsc9953: Add commands for VLAN ingress filtering
[U-Boot] [PATCH v2 0/7] dm: x86: PCI/SPI fixes for minnowboard MAX
2015-06-25 17:55 UTC (5+ messages)
` [U-Boot] [PATCH v2 4/7] x86: Add ROM image description for minnowmax
` [U-Boot] [PATCH v2 5/7] x86: pci: Tidy up the generic x86 PCI driver
` [U-Boot] [PATCH v2 6/7] dm: x86: minnowmax: Move PCI to use driver model
` [U-Boot] [PATCH v2 7/7] dm: x86: baytrail: Correct PCI region 3 when driver model is used
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox