messages from 2015-06-28 10:57:02 to 2015-06-30 09:09:25 UTC [more...]
[U-Boot] [PATCH 0/8] JFFS2 fixes and performance improvements
2015-06-30 9:09 UTC (13+ messages)
` [U-Boot] [PATCH 1/8] JFFS2: Return early when file read not necessary
` [U-Boot] [PATCH 2/8] JFFS2: Speed up and fix comparison functions
` [U-Boot] [PATCH 3/8] JFFS2: Only list each directory entry once
` [U-Boot] [PATCH 4/8] JFFS2: Improve speed reading flash files
` [U-Boot] [PATCH 5/8] JFFS2: Optimize building lists during scan
` [U-Boot] [PATCH 6/8] JFFS2: Change scansize to match linux kernel
` [U-Boot] [PATCH 7/8] JFFS2: Use CLEANMARKER to reduce scanning time
` [U-Boot] [PATCH 8/8] JFFS2: Use merge sort when parsing filesystem
[U-Boot] [PATCH 00/11 v2] Add more commands for VSC9953 L2 Switch
2015-06-30 9:03 UTC (17+ messages)
` [U-Boot] [PATCH 03/11 v2] drivers/net/vsc9953: Add default configuration "
` [U-Boot] [PATCH 04/11 v2] drivers/net/vsc9953: Refractor the parser for VSC9953 commands
` [U-Boot] [PATCH 05/11 v2] drivers/net/vsc9953: Add command to show/clear port counters
` [U-Boot] [PATCH 06/11 v2] drivers/net/vsc9953: Add commands to enable/disable HW learning
[U-Boot] [PATCH v2] ARM: UniPhier: drop special CONFIG_AUTOBOOT_ settings
2015-06-30 8:10 UTC
[U-Boot] [PATCH] imx: imximage: add new CHECK/CLR BIT command
2015-06-30 8:02 UTC (3+ messages)
[U-Boot] [PATCH] arm: convert am3517_crane and am3517_evm to generic boards
2015-06-30 7:59 UTC
[U-Boot] FEL mode broken since "sunxi: Move all boards to the driver-model"
2015-06-30 7:33 UTC (4+ messages)
[U-Boot] Marvell Armada XP SATA support
2015-06-30 6:57 UTC (5+ messages)
[U-Boot] [v3 00/10] spi: cadence_qspi: sram depth from DT & fix for FIFO width
2015-06-30 6:29 UTC (13+ messages)
` [U-Boot] [v3 01/10] stv0991: enable saving enrironment in spi flash
` [U-Boot] [v3 02/10] stv0991: move OF_CONTROL config to defconfig
` [U-Boot] [v3 03/10] stv0991: remove define CONFIG_OF_SEPARATE from board file
` [U-Boot] [v3 04/10] stv0991: configure clock & pad muxing for qspi
` [U-Boot] [v3 05/10] stv0991: enable cadence qspi controller & spi flash
` [U-Boot] [v3 06/10] stv0991: configure device tree for cadence qspi & flash
` [U-Boot] [v3 07/10] spi: cadence_qspi: move the sram partition in init
` [U-Boot] [v3 08/10] spi: cadence_qspi: get sram size from device tree
` [U-Boot] [v3 09/10] spi: cadence_qspi: support FIFO width other than 4 bytes
` [U-Boot] [v3 10/10] spi: cadence_qspi: add device tree binding doc
[U-Boot] [PATCH] net: designware: fix driver name
2015-06-30 5:20 UTC (2+ messages)
[U-Boot] [PATCH] powerpc/mpc85xx:Add GCC flag -fno-delete-null-pointer-checks
2015-06-30 4:18 UTC (4+ messages)
[U-Boot] [PATCH V4 1/6] imx: add dummpy cpu type MXC_CPU_MX6QP/DP
2015-06-30 2:36 UTC (6+ messages)
` [U-Boot] [PATCH V4 2/6] imx: mx6: ccm: Change the clock settings for i.MX6QP
` [U-Boot] [PATCH V4 3/6] imx: mx6: hab : Remove the cache issue workaroud in hab "
` [U-Boot] [PATCH V4 4/6] imx: mx6qp Enable PRG clock for IPU
` [U-Boot] [PATCH V4 5/6] imx: mx6sabresd/sabreauto runtime setting fdt_file
` [U-Boot] [PATCH V4 6/6] imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support
[U-Boot] [PATCH][v7] mpc85xx/T104xD4RDB: Add T104xD4RDB boards support
2015-06-29 23:28 UTC (4+ messages)
[U-Boot] [PATCH v6 1/5] dm: sf: Add Atmel DataFlash spi flash driver
2015-06-29 23:18 UTC (2+ messages)
[U-Boot] [PATCH v2 5/5] armv7: ls1021a: Enable OF_CONTROL and DM support for DSPI and QSPI in defconfig
2015-06-29 23:18 UTC (2+ messages)
[U-Boot] [PATCH v2 0/7] dm: x86: PCI/SPI fixes for minnowboard MAX
2015-06-29 22:58 UTC (16+ messages)
` [U-Boot] [PATCH v2 1/7] dm: spi: Correct status register access width
` [U-Boot] [PATCH v2 2/7] dm: spi: Correct BIOS protection logic for ICH9
` [U-Boot] [PATCH v2 4/7] x86: Add ROM image description for minnowmax
` [U-Boot] [PATCH v2 5/7] x86: pci: Tidy up the generic x86 PCI driver
` [U-Boot] [PATCH v2 7/7] dm: x86: baytrail: Correct PCI region 3 when driver model is used
[U-Boot] [ANN] U-Boot v2015.07-rc3 released
2015-06-29 21:51 UTC
[U-Boot] Pull request: u-boot-spi/master
2015-06-29 21:51 UTC (2+ messages)
[U-Boot] [PATCH] sunxi: Fix wrong pinmux names in arch/arm/cpu/armv7/sunxi/board.c
2015-06-29 21:03 UTC
[U-Boot] [PATCH] net: lpc32xx: correct command register reset value
2015-06-29 20:38 UTC (3+ messages)
[U-Boot] [PATCH] net: lpc32xx: connect MAC to phy with CONFIG_PHY_ADDR id
2015-06-29 20:37 UTC (3+ messages)
[U-Boot] [PATCH 01/12][v3] drivers/fsl-mc: Make MC boot error messages more readable
2015-06-29 20:01 UTC (7+ messages)
` [U-Boot] [PATCH 06/12][v3] drivers: fsl-mc: Return error for major version mismatch
` [U-Boot] [PATCH 10/12][v3] driver/ldpaa_eth: Retry enqueue if portal was busy
` [U-Boot] [PATCH 11/12][v3] driver/ldpaa_eth: Add timeout handling DQRR entry read
[U-Boot] [PATCH v2] spi: cf_qspi: fix clamp macro type check compilation warnings
2015-06-29 20:00 UTC (4+ messages)
[U-Boot] [PATCH v2] sf: update sst25wf040b flash params
2015-06-29 19:53 UTC (4+ messages)
[U-Boot] [PATCH v7 0/5] sf: Add dataflash support
2015-06-29 19:52 UTC (15+ messages)
` [U-Boot] [PATCH 1/5] dm: sf: Add Atmel DataFlash spi flash driver
` [U-Boot] [PATCH 2/5] dm: ls1021aqds: dts: Use "spi_dataflash" driver instead of "spi_flash_std" for DSPI flash
` [U-Boot] [PATCH 3/5] arm: ls102xa: Enable Driver Model SPI for ls1021aqds
` [U-Boot] [PATCH 4/5] arm: ls102xa: Enable Driver Model SPI for ls1021atwr
` [U-Boot] [PATCH 5/5] defconfig: ls1021a: Add OF_CONTROL and DM support
[U-Boot] [PATCH 0/5] sf: defconfig/kconfig updates
2015-06-29 19:29 UTC (6+ messages)
` [U-Boot] [PATCH 1/5] README: Remove CONFIG_SPI_FLASH_MTD help text
` [U-Boot] [PATCH 2/5] defconfig: Move CONFIG_SPI_FLASH_BAR from configs
` [U-Boot] [PATCH 3/5] sf: Kconfig: Add SPI_FLASH_BAR entry
` [U-Boot] [PATCH 4/5] README: Remove CONFIG_SPI_FLASH_BAR help text
` [U-Boot] [PATCH 5/5] README: Remove CONFIG_SPI_FLASH_DATAFLASH "
[U-Boot] [v2 0/6] stv0991: enable cadence qspi controller & spi flash
2015-06-29 19:06 UTC (6+ messages)
[U-Boot] [PATCH] qemu-ppce500: Align code at 64k boundary
2015-06-29 18:38 UTC (4+ messages)
[U-Boot] [PATCH 1/2] qe: transform parameter to compatible type
2015-06-29 18:30 UTC (8+ messages)
` [U-Boot] [PATCH 2/2] qe: use strncpy instead of strcpy
[U-Boot] [PATCH] x86: WIP: Enable D0 stepping microcode for MinnowMax
2015-06-29 17:57 UTC (10+ messages)
[U-Boot] USE_HOSTCC in lib/rsa/rsa-verify.c
2015-06-29 17:52 UTC (2+ messages)
[U-Boot] git fsck errors with u-boot
2015-06-29 17:31 UTC
[U-Boot] [PATCH v1 0/9] mvebu/a38x: Add MMC/SDIO, SATA/AHCI and USB/EHCI support
2015-06-29 16:03 UTC (12+ messages)
` [U-Boot] [PATCH v1 1/9] mmc: sdhci: Use timer based timeout detection in sdhci_send_command()
` [U-Boot] [PATCH v1 2/9] mmc: sdhci.c: Add config option to use a fixed buffer for transfers
` [U-Boot] [PATCH v1 3/9] arm: mvebu: Add SDIO/SDHCI support for Armada A38x
` [U-Boot] [PATCH v1 4/9] arm: mvebu: db-88f6820-gp: Add MMC/SDIO support
` [U-Boot] [PATCH v1 5/9] block: ahci: Don't enable port interrupts
` [U-Boot] [PATCH v1 6/9] arm: mvebu: Add SATA/SCSI (AHCI) support for Armada A38x
` [U-Boot] [PATCH v1 7/9] arm: mvebu: db-88f6820-gp.h: Add SATA/SCSI (AHCI) support
` [U-Boot] [PATCH v1 8/9] usb: Add EHCI support for Armada 38x (mvebu)
` [U-Boot] [PATCH v1 9/9] arm: mvebu: db-88f6820-gp: Add USB/EHCI support
[U-Boot] [PATCH 00/20] spi/sf: Kconfig updates
2015-06-29 16:00 UTC (8+ messages)
` [U-Boot] [PATCH 06/20] sf: Kconfig: Add SPI_FLASH_MTD entry
` [U-Boot] [PATCH 10/20] spi: Kconfig: Add TI_QSPI entry
` [U-Boot] [PATCH 17/20] spi: Kconfig: Add ICH_SPI entry
[U-Boot] [PATCH V3 1/6] imx: add dummpy cpu type MXC_CPU_MX6QP/DP
2015-06-29 15:31 UTC (12+ messages)
` [U-Boot] [PATCH V3 2/6] imx: mx6: ccm: Change the clock settings for i.MX6QP
` [U-Boot] [PATCH V3 3/6] imx: mx6: hab : Remove the cache issue workaroud in hab "
` [U-Boot] [PATCH V3 4/6] imx: mx6qp Enable PRG clock for IPU
` [U-Boot] [PATCH V3 5/6] imx: mx6sabresd/sabreauto runtime setting fdt_file
` [U-Boot] [PATCH V3 6/6] imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support
[U-Boot] [PATCH] x86: baytrail: Configure FSP UPD from device tree
2015-06-29 15:10 UTC
[U-Boot] [PATCH v2 1/8] imx: mx6 correct is_soc_rev usage
2015-06-29 12:26 UTC (12+ messages)
` [U-Boot] [PATCH v2 4/8] imx: mx6: ccm: Change the clock settings for i.MX6QP
` [U-Boot] [PATCH v2 7/8] imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support
[U-Boot] [PATCH v2] Initial support for ACPI Tables for qemu-x86 target
2015-06-29 11:50 UTC (6+ messages)
[U-Boot] [PATCH 2/2] armv8/ls2085aqds: enable 32KHz rtc output
2015-06-29 10:09 UTC
[U-Boot] [PATCH 1/2] rtc:ds3232/ds3231: Add support to generate 32KHz output
2015-06-29 10:09 UTC
[U-Boot] [PATCH 3/3] sunxi:Added difference MMC SLOT for booting
2015-06-29 9:48 UTC
[U-Boot] [PATCH 2/3] sunxi:Added Mele i7 eMMC MOD DTS
2015-06-29 9:47 UTC
[U-Boot] [PATCH 1/3] sunxi:Added NAND Flash defines and MMC2 IO defines for sun6i
2015-06-29 9:47 UTC
[U-Boot] [PATCH 1/2] defconfig: Add CONFIG_OF_CONTROL in zynq_picozed
2015-06-29 9:03 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] zynq: defconfig: Move CONFIG_OF_* to Kconfig
[U-Boot] [PATCH] sf: update sst25wf040b flash params
2015-06-29 8:40 UTC (4+ messages)
[U-Boot] [PATCH] armv8/fsl-lsch3: Fix TCR_EL3 for the final MMU setup
2015-06-29 7:50 UTC
[U-Boot] [PATCH v4 14/16] dm: spi: xilinx_spi: Convert to driver model
2015-06-29 7:50 UTC
[U-Boot] [PATCH 1/2] armv8: Fix TCR macros for shareability attribute
2015-06-29 7:49 UTC
[U-Boot] [PATCH v8 3/5] arm: ls102xa: Enable Driver Model SPI for ls1021aqds
2015-06-29 7:48 UTC (2+ messages)
[U-Boot] [PATCH V2 1/2] imx: mx6 remove duplicated enable_cspi_clock
2015-06-29 7:29 UTC (6+ messages)
` [U-Boot] [PATCH V2 2/2] imx: mx6 add i2c4 clock support for i.MX6SX
[U-Boot] [PATCH v2 0/3] add support for the at91 based smartweb board
2015-06-29 7:10 UTC (4+ messages)
` [U-Boot] [PATCH v2 1/3] spl, common, serial: build SPL without serial support
` [U-Boot] [PATCH v2 2/3] nand, atmel: remove udelay in spl_nand_erase_one()
` [U-Boot] [PATCH v2 3/3] arm, at91: support for sam9260 based smwartweb board
[U-Boot] [PATCH v2 1/2] pci: Configure expansion ROM during auto config process
2015-06-29 5:08 UTC (2+ messages)
[U-Boot] [PATCH 00/22] Convert musb host mode code to the device-model
2015-06-29 3:45 UTC (31+ messages)
` [U-Boot] [PATCH 01/22] usb: Always declare usb function prototypes
` [U-Boot] [PATCH 02/22] usb: Drop device-model specific copy of usb_legacy_port_reset
` [U-Boot] [PATCH 03/22] usb: usb_setup_device: Drop unneeded portnr function argument
` [U-Boot] [PATCH 04/22] usb: Pass device instead of portnr to usb_legacy_port_reset
` [U-Boot] [PATCH 05/22] usb: Add an usb_device parameter to usb_reset_root_port
` [U-Boot] [PATCH 06/22] dm: Export device_chld_remove / device_chld_unbind
` [U-Boot] [PATCH 07/22] dm: usb: Fix "usb tree" output
` [U-Boot] [PATCH 08/22] dm: usb: Use device_chld_remove and _unbind to clean up usb devs on stop
` [U-Boot] [PATCH 09/22] dm: usb: Allow usb host drivers to implement usb_reset_root_port
` [U-Boot] [PATCH 10/22] dm: usb: Do not assume that first child is always a hub
` [U-Boot] [PATCH 11/22] musb: Allow musb_platform_enable to return an error code
` [U-Boot] [PATCH 12/22] musb: Update usb-compat to work with struct usb_device without a parent ptr
` [U-Boot] [PATCH 13/22] musb: Rename and wrap public functions
` [U-Boot] [PATCH 14/22] musb: Add musb_host_data struct to hold global data
` [U-Boot] [PATCH 15/22] musb: Add device-model support to the musb-host u-boot glue
[U-Boot] Please pull u-boot-marvell master
2015-06-29 0:36 UTC (2+ messages)
[U-Boot] [PATCH 0/2] sunxi: musb: Fix "usb reset" handling
2015-06-28 20:42 UTC (4+ messages)
[U-Boot] [PATCH v2 05/20] sf: Kconfig: Update SPI_FLASH entry
2015-06-28 19:32 UTC
[U-Boot] Setting up vexpress u-boot for distro configs and use in virt
2015-06-28 19:27 UTC (5+ messages)
` [U-Boot] [PATCH 1/3] PXE: if a board has set its own value for CONFIG_BOOTP_VCI_STRING do not set the default one. Use the board set value instead
` [U-Boot] [PATCH 2/3] Move setting CONFIG_BOOTP_VCI_STRING to before including the vexpress-common header
` [U-Boot] [PATCH 3/3] port vexpress to use distro boot commands
[U-Boot] [PATCH 4/7] imx6: define CONFIG_IMX6_THERMAL as a default option
2015-06-28 16:32 UTC (6+ messages)
[U-Boot] Please pull u-boot-sunxi master (fixes for v2015.07)
2015-06-28 16:06 UTC (4+ messages)
[U-Boot] [PATCH v3 0/4] arm: mvebu: Allow DB-88F6820-GP to boot Linux
2015-06-28 16:00 UTC (4+ messages)
` [U-Boot] [PATCH v3 3/4] mv-common.h: Include support for device trees
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox