messages from 2015-08-13 13:18:27 to 2015-08-13 19:08:46 UTC [more...]
[U-Boot] [PATCH 1/3] tbs2910: use full name in Kconfig board selection
2015-08-13 19:08 UTC (2+ messages)
` [U-Boot] [PATCH 2/3] tbs2910: remove deprecated CONFIG_SYS_EXTRA_OPTIONS
[U-Boot] [PATCH v2 01/15] cgtqmx6eval: Use default prompt
2015-08-13 19:07 UTC (3+ messages)
` [U-Boot] [PATCH v2 08/15] cgtqmx6eval: Add SPI NOR flash support
[U-Boot] [v2 0/6] spi: cadence_qspi: optimize & fix indirect rd-writes
2015-08-13 19:05 UTC (17+ messages)
` [U-Boot] [v2 1/6] spi: cadence_qspi: move trigger base configuration in init
` [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read
` [U-Boot] [v2 3/6] spi: cadence_qspi: remove sram polling from flash write
` [U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer start address
[U-Boot] [PATCH 1/3] ARM: at91: sama5: move the sd/mmc env config to at91-sama5_common.h
2015-08-13 19:04 UTC (3+ messages)
` [U-Boot] [PATCH 3/3] ARM: at91: sama5: update the spi flash mapping
[U-Boot] [PATCH v3 00/11] arm: rpi: Enable USB and Ethernet driver model Raspberry Pi
2015-08-13 19:04 UTC (7+ messages)
` [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART
[U-Boot] [U-Boot PATCH v2 00/10] Enable edma support for ti-qspi
2015-08-13 19:00 UTC (28+ messages)
` [U-Boot] [U-Boot PATCH v2 01/10] sf: allocate cache aligned buffers to copy from flash
` [U-Boot] [U-Boot PATCH v2 02/10] env: use cache line aligned memory for flash read
` [U-Boot] [U-Boot PATCH v2 03/10] ARM: AM43xx: Add support for disabling clocks in uboot
` [U-Boot] [U-Boot PATCH v2 04/10] ARM: OMAP5: "
` [U-Boot] [U-Boot PATCH v2 05/10] ARM: OMAP5: Add functions to enable and disable EDMA3 clocks
` [U-Boot] [U-Boot PATCH v2 06/10] ARM: AM43XX: "
` [U-Boot] [U-Boot PATCH v2 07/10] sf: ops: Add spi_flash_copy_mmap function
` [U-Boot] [U-Boot PATCH v2 08/10] dma: ti-edma3: Add helper function to support edma3 transfer
` [U-Boot] [U-Boot PATCH v2 09/10] spi: ti_qspi: Use DMA to read from qspi flash
` [U-Boot] [U-Boot PATCH v2 10/10] ARM: dra7xx_evm: Enable EDMA3 in SPL to support DMA on qspi
[U-Boot] [PATCH] usb_storage: USB storage transfer size increase for xHCI
2015-08-13 19:00 UTC
[U-Boot] tftpserver in uboot
2015-08-13 18:40 UTC
[U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)
2015-08-13 18:38 UTC (5+ messages)
[U-Boot] [PATCH] spi: zynq_spi: Simplify debug macro
2015-08-13 18:37 UTC (2+ messages)
[U-Boot] [PATCH 01/19] ARM: zynq: DT: Use the right names for nodes
2015-08-13 18:36 UTC (3+ messages)
` [U-Boot] [PATCH 06/19] spi: Fix zynq SPI binding
[U-Boot] [PATCH v2] kconfiglib: update to the latest version
2015-08-13 18:25 UTC (3+ messages)
[U-Boot] [PATCH] ti: qspi: set flash quad bit based on quad support flag
2015-08-13 18:11 UTC (2+ messages)
[U-Boot] printf("%d") breaks u-boot 2015.01+
2015-08-13 17:41 UTC (12+ messages)
` [U-Boot] [patch] break build if it would produce broken binary
[U-Boot] [RESEND PATCH 1/1] armv8: Add framework for CCN-504 interconnect configuration
2015-08-13 17:40 UTC (2+ messages)
[U-Boot] [RESUBMIT PATCH v3 0/8] This patch series adds support for Cavium ThunderX 88xx SoC family
2015-08-13 17:31 UTC (10+ messages)
` [U-Boot] [RESUBMIT PATCH v3 1/8] armv8: Add read_mpidr() function
` [U-Boot] [RESUBMIT PATCH v3 2/8] armv8: New MMU setup code allowing to use 48+ bits PA/VA
` [U-Boot] [RESUBMIT PATCH v3 3/8] armv8: Add SMC calls infrastructure
` [U-Boot] [RESUBMIT PATCH v3 4/8] armv8: Add psci.h from the Linux kernel
` [U-Boot] [RESUBMIT PATCH v3 5/8] arm: serial: Add ability to use pre-initialized UARTs
` [U-Boot] [RESUBMIT PATCH v3 6/8] armv8: cavium: Add ThunderX 88xx board definition
` [U-Boot] [RESUBMIT PATCH v3 7/8] armv8: cavium: Add an implementation of ATF calling functions
` [U-Boot] [RESUBMIT PATCH v3 8/8] armv8: cavium: Get DRAM size from ATF
[U-Boot] [PATCH v2 0/2] Rename DDR4 target names
2015-08-13 17:22 UTC (3+ messages)
` [U-Boot] [PATCH v2 1/2] armv8/ls2085a_emu: Drop DDR3 emulation target
` [U-Boot] [PATCH v2 2/2] powerpc/defconfig: Rename defconfig file for T1040QDS/T1024QDS DDR4 targets
[U-Boot] [PATCH] kconfiglib: update to the latest version
2015-08-13 17:02 UTC (4+ messages)
` [U-Boot] "
[U-Boot] [PATCH v4 1/2] x86: minnowmax: Define and enable interrupt setup
2015-08-13 16:36 UTC (2+ messages)
` [U-Boot] [PATCH v4 2/2] x86: Add a simple interrupt script to the README
[U-Boot] [PATCH v3 0/7] This patch series adds support for Cavium ThunderX 88xx SoC family
2015-08-13 16:29 UTC (10+ messages)
` [U-Boot] [PATCH v3 1/7] armv8: New MMU setup code allowing to use 48+ bits PA/VA
` [U-Boot] [PATCH v3 2/7] armv8: Add SMC calls infrastructure
` [U-Boot] [PATCH v3 3/7] armv8: Add psci.h from the Linux kernel
` [U-Boot] [PATCH v3 4/7] arm: serial: Add ability to use pre-initialized UARTs
` [U-Boot] [PATCH v3 5/7] armv8: cavium: Add ThunderX 88xx board definition
` [U-Boot] [PATCH v3 6/7] armv8: cavium: Add an implementation of ATF calling functions
` [U-Boot] [PATCH v3 7/7] armv8: cavium: Get DRAM size from ATF
[U-Boot] [PATCH v2 0/6] net: Move e1000 driver to driver model and Kconfig
2015-08-13 15:55 UTC (9+ messages)
` [U-Boot] [PATCH v2 3/6] net: e1000: Convert to driver model
` [U-Boot] [PATCH v2 5/6] Tidy up some defconfig files
[U-Boot] [PATCH 0/3] Introduce TPM driver model and STMicroelectronics ST33ZP24 TPMs
2015-08-13 15:55 UTC (7+ messages)
` [U-Boot] [PATCH 1/3] tpm: Move tpm_tis_i2c to tpm_i2c_infineon
` [U-Boot] [PATCH 2/3] tpm: Initial work to introduce TPM driver model
` [U-Boot] [PATCH 3/3] tpm: Add st33zp24 tpm with i2c and spi phy
[U-Boot] [PATCH v3 04/16] drivers/net/vsc9953: Fix missing reserved register
2015-08-13 15:54 UTC (12+ messages)
` [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address
[U-Boot] [PATCH v3 0/6] net: Move e1000 driver to driver model and Kconfig
2015-08-13 15:50 UTC (7+ messages)
` [U-Boot] [PATCH v3 1/6] net: e1000: Move #include of common.h to the C files
` [U-Boot] [PATCH v3 2/6] net: e1000: Prepare for driver model conversion
` [U-Boot] [PATCH v3 3/6] net: e1000: Convert to driver model
` [U-Boot] [PATCH v3 4/6] net: e1000: Add Kconfig options
` [U-Boot] [PATCH v3 5/6] Tidy up some defconfig files
` [U-Boot] [PATCH v3 6/6] net: Move CONFIG_E1000 options to Kconfig
[U-Boot] [PATCH] ARM: OMAP5+: configs: Fix default boot command
2015-08-13 15:42 UTC (7+ messages)
[U-Boot] [RFC PATCH 00/28] Janitorial: powerpc: remove PowerPC non-generic boards
2015-08-13 15:13 UTC (6+ messages)
` [U-Boot] [RFC PATCH 27/28] powerpc: remove MPC8610HPCD support
[U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver
2015-08-13 15:03 UTC (6+ messages)
[U-Boot] [PATCH 0/3] ARM: DRA74x: Add support for ES2.0
2015-08-13 14:51 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] ARM: DRA7: Add detection of ES2.0
` [U-Boot] [PATCH 2/3] ARM: DRA74-evm: Add iodelay values for SR2.0
` [U-Boot] [PATCH 3/3] ARM: DRA74-evm: Use SMA_1 spare register to workaround DP83865 phy on SR2.0
[U-Boot] [PATCH 0/6] ti: dwc3: Enable USB clocks on-demand
2015-08-13 14:34 UTC (7+ messages)
` [U-Boot] [PATCH 2/6] ARM: OMAP5: Add functions to enable and disable USB clocks
` [U-Boot] [PATCH 4/6] ARM: AM43xx: "
[U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file
2015-08-13 14:22 UTC (10+ messages)
` [U-Boot] [PATCH 2/4] x86: Update microcode dtsi and board dts files per microcode-tool
` [U-Boot] [PATCH 3/4] x86: baytrail: Add microcode for BayTrail-I D0 stepping
` [U-Boot] [PATCH 4/4] x86: baytrail: Support multiple microcode copies
[U-Boot] [PATCH] Add clarifications to the x86 README
2015-08-13 13:54 UTC (7+ messages)
` [U-Boot] [PATCH] x86: "
[U-Boot] [U-BOOT PATCH v3 0/4] x86: This series adds ACPI support for qemu targets
2015-08-13 13:46 UTC (5+ messages)
` [U-Boot] [U-BOOT PATCH v3 3/4] x86: Added ACPI support for Qemu
` [U-Boot] [U-BOOT PATCH v3 4/4] x86: Added dsdt tables for Qemu ACPI implementation
[U-Boot] [PATCH 0/4] arm: at91: change mpddr and support picosam9g45
2015-08-13 13:43 UTC (5+ messages)
` [U-Boot] [PATCH 1/4] arm: at91: mpddr: allow multiple DDR controllers
` [U-Boot] [PATCH 2/4] arm: at91: at91sam9m10g45ek/corvus remove useless chip select 1 init
` [U-Boot] [PATCH 3/4] arm: at91: pmc: replace the constant with a define in at91_pmc.h
` [U-Boot] [PATCH 4/4] arm: at91: add support for mini-box picosam9g45 board
[U-Boot] [PATCH v4 0/9] Add support for hi6220 SoC and HiKey 96boards CE board
2015-08-13 13:24 UTC (2+ messages)
[U-Boot] GCC 5.2 issue on imx28
2015-08-13 13:23 UTC (2+ messages)
[U-Boot] [PATCH 1/2] configs: ti_armv7_keystone2: fix initrd address at args_ramfs
2015-08-13 13:23 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [RESEND PATCH v5] image-fdt.c: store returned error value
2015-08-13 13:23 UTC (2+ messages)
` [U-Boot] [U-Boot, RESEND, "
[U-Boot] [RESEND PATCH v5] colibri_vf: remove spurious new line
2015-08-13 13:23 UTC (2+ messages)
` [U-Boot] [U-Boot, RESEND, "
[U-Boot] [RESEND PATCH v5] generic-board: allow showing custom board info
2015-08-13 13:23 UTC (2+ messages)
` [U-Boot] [U-Boot, RESEND, "
[U-Boot] [RESEND PATCH v5] fs/fs.c: read up to EOF when len would read past EOF
2015-08-13 13:23 UTC (2+ messages)
` [U-Boot] [U-Boot, RESEND, "
[U-Boot] [PATCH 2/2] configs: ti_armv7_keystone2: increase size reserved for initrd
2015-08-13 13:23 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [RESEND PATCH] common/lcd_console: fix console/logo regression
2015-08-13 13:23 UTC (2+ messages)
` [U-Boot] [U-Boot, RESEND] "
[U-Boot] [PATCH V3] kconfig: add config option for shell prompt
2015-08-13 13:23 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH] ARM: drop "optional" from target select in favor of ARCH_VERSATILE
2015-08-13 13:23 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH 5/5] dra7xx: Add dra72_evm_defconfig using CONFIG_DM
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 4/5] dra7xx: Move CONS_INDEX to Kconfig and enable CONFIG_SPL_STACK_ADDR
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 3/5] ARM: SPL: Use CONFIG_SPL_DM not CONFIG_DM
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 2/5] gpio: omap: Drop 'method' parameter
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot,2/5] "
[U-Boot] [PATCH 1/5] am33xx: Update DT files, add am335x_gp_evm_config target
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 6/6] arm: am437x: Introduce new board cm-t43
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot,6/6] "
[U-Boot] [PATCH 5/6] gpio: am43xx: expand gpio support
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot,5/6] "
[U-Boot] [PATCH 4/6] mmc: omap_hsmmc: enable 8bit interface for eMMC for AM43xx
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 3/6] mmc: omap_hsmmc: enable proper CMD(DAT) lines reset procedure for am43xx
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 2/6] arm: am43xx: enable spi clock
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot,2/6] "
[U-Boot] [PATCH 1/6] spi: omap3_spi: add am43xx support to omap3_spi
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH v4 8/9] ARM64: hikey: Add a README for this board
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot, v4, "
[U-Boot] [PATCH v4 7/9] ARM64: hikey: hi6220: Add u-boot support for the 96boards CE HiKey board
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot, v4, "
[U-Boot] [PATCH v4 6/9] mmc: hi6220_dw_mmc: Add hi6220 glue code for dw_mmc controller
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot, v4, "
[U-Boot] [PATCH v4 5/9] pmic: pmic_hi6553: Add a driver for the hi6553 pmic found on hikey board
2015-08-13 13:22 UTC (2+ messages)
` [U-Boot] [U-Boot, v4, "
[U-Boot] [PATCH v4 4/9] hisilicon: hi6220: Add a hi6220 pinmux driver
2015-08-13 13:21 UTC (2+ messages)
` [U-Boot] [U-Boot, v4, "
[U-Boot] [PATCH v4 3/9] ARM: hi6220: Add register and bitfield definition header files
2015-08-13 13:21 UTC (2+ messages)
` [U-Boot] [U-Boot, v4, "
[U-Boot] [PATCH v4 2/9] dm: gpio: hi6220: Add a hi6220 GPIO driver model driver
2015-08-13 13:21 UTC (2+ messages)
` [U-Boot] [U-Boot, v4, "
[U-Boot] [PATCH 1/2] spl: Fix compile warning for arm64
2015-08-13 13:21 UTC (2+ messages)
` [U-Boot] [U-Boot,1/2] "
[U-Boot] [PATCH 2/2] common/cmd_source.c: Fix the source command failure under 64-bit platform
2015-08-13 13:21 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH v2 8/8] ARM: keystone2: Use common definition for clk_get_rate
2015-08-13 13:21 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 7/8] ARM: keystone2: Remove unsed external clocks
2015-08-13 13:21 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 6/8] ARM: keystone2: Cleanup init_pll definition
2015-08-13 13:21 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 5/8] ARM: keystone2: Use common structure for PLLs
2015-08-13 13:21 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 4/8] ARM: keystone2: Fix dev and arm speed detection
2015-08-13 13:21 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 3/8] ARM: keystone2: Cleanup PLL init code
2015-08-13 13:21 UTC (2+ messages)
` [U-Boot] [U-Boot,v2,3/8] "
[U-Boot] [PATCH v2 2/8] ARM: keystone2: Enable CONFIG_DISPLAY_CPUINFO
2015-08-13 13:21 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 1/8] ARM: keystone2: Cleanup SoC detection
2015-08-13 13:21 UTC (2+ messages)
` [U-Boot] [U-Boot,v2,1/8] "
[U-Boot] [PATCH V2 3/3] ARM: DRA72: disable workaround for 801819
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot, V2, "
[U-Boot] [PATCH V2 2/3] ARM: DRA7/ OMAP5: implement Auxiliary Control Register configuration
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot, V2, "
[U-Boot] [PATCH V2 1/3] ARM: Introduce erratum workaround for 801819
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot, V2, "
[U-Boot] [PATCH 7/7] net: lpc32xx: eth buffers base config
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot,7/7] "
[U-Boot] [PATCH 6/7] i2c: lpc32xx: fix write timeout
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot,6/7] "
[U-Boot] [PATCH 5/7] i2c: lpc32xx: fix read timeout
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot,5/7] "
[U-Boot] [PATCH 4/7] i2c: lpc32xx: use api to get hclk instead of fix value
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 3/7] arm: lpc32xx: gpio macro for pin mapping
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot,3/7] "
[U-Boot] [PATCH 2/7] lpc32xx: cpu: add support for soft reset
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot,2/7] "
[U-Boot] [PATCH 1/7] arm: lpc32xx: mux: add missing registers
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot,1/7] "
[U-Boot] [PATCH v2] integrator: switch to DM serial port
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot,v2] "
[U-Boot] [PATCH v3 4/4] usb: ohci: enable cache support
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot,v3,4/4] "
[U-Boot] [PATCH v3 3/4] ARM: cache: implement a default weak flush_cache() function
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v3 2/4] ARM: cache: add an empty stub function for invalidate/flush dcache
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v3 1/4] m68k: cache: add an empty stub functions for invalidate/flush dcache
2015-08-13 13:20 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH][v2] Correct License and Copyright information on few files
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] [U-Boot, v2] "
[U-Boot] [PATCH V2 3/3] ti: drop value from CONFIG_SYS_NAND_BUSWIDTH_16BIT
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] [U-Boot, V2, "
[U-Boot] [PATCH V2 2/3] mcx: add Ethernet over USB
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] [U-Boot,V2,2/3] "
[U-Boot] [PATCH V2 1/3] omap3: fix NAND support for mcx board
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] [U-Boot,V2,1/3] "
[U-Boot] [PATCH] drivers: hierarchize drivers Kconfig menu
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] include/bitfield.h: Assure new bitfield value doesn't touch unwanted bits
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v4 7/7] arm/rpi: Enable dcache
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] [U-Boot,v4,7/7] "
[U-Boot] [PATCH v4 6/7] dwc2: Add dcache support
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] [U-Boot,v4,6/7] "
[U-Boot] [PATCH v4 5/7] arm/mach-bcm283x/mbox: Flush and invalidate dcache when using fw mailbox
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] [U-Boot, v4, "
[U-Boot] [PATCH v4 4/7] ARM: bcm283x: Allocate all mailbox buffers cacheline aligned
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] [U-Boot, v4, "
[U-Boot] [PATCH v4 3/7] ARM: bcm283x: Define CONFIG_SYS_CACHELINE_SIZE
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] [U-Boot, v4, "
[U-Boot] [PATCH v4 2/7] arm1136/arm1176: Merge cache handling code
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] [U-Boot, v4, "
[U-Boot] [PATCH v4 1/7] arm1136: Remove dead code
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] [U-Boot,v4,1/7] "
[U-Boot] [PATCH 12/12] sniper: Keypad support, with recovery and fastboot key combinations
2015-08-13 13:19 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 11/12] sniper: Power off when the power on reason is not a valid one
2015-08-13 13:18 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 10/12] sniper: Power button reset support
2015-08-13 13:18 UTC (2+ messages)
` [U-Boot] [U-Boot,10/12] "
[U-Boot] [PATCH 09/12] sniper: Fastboot support
2015-08-13 13:18 UTC (2+ messages)
` [U-Boot] [U-Boot,09/12] "
[U-Boot] [PATCH 08/12] sniper: Pass serial number through ATAG
2015-08-13 13:18 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 07/12] sniper: Serial number support, obtained from die ID
2015-08-13 13:18 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 06/12] sniper: OMAP3 reboot mode support
2015-08-13 13:18 UTC (2+ messages)
` [U-Boot] [U-Boot,06/12] "
[U-Boot] [PATCH 05/12] LG Optimus Black (P970) codename sniper support
2015-08-13 13:18 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 04/12] omap3: Reboot mode support
2015-08-13 13:18 UTC (2+ messages)
` [U-Boot] [U-Boot,04/12] "
[U-Boot] [PATCH 03/12] input: twl4030: Keypad scan and input
2015-08-13 13:18 UTC (2+ messages)
` [U-Boot] [U-Boot,03/12] "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox