public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
 messages from 2016-01-13 20:10:06 to 2016-01-14 13:44:58 UTC [more...]

[U-Boot] [PATCH 1/9] ARM: zynq: Remove memory division by 2 for ECC case
 2016-01-14 13:44 UTC  (7+ messages)
` [U-Boot] [PATCH 2/9] ARM: zynq: Do not select options if SPL is not enabled
` [U-Boot] [PATCH 3/9] ARM: zynq: Define sys prompt for all Zynq boards
` [U-Boot] [PATCH 4/9] ARM: zynq: Enable SPI_FLASH for zc770 xm013 platform
` [U-Boot] [PATCH 5/9] ARM: zynq: Move FLASH_BAR to Kconfig
` [U-Boot] [PATCH 6/9] ARM: zynq: Clean DTSI coding style
` [U-Boot] [PATCH 7/9] ARM: zynq: Fix all remaining zynq platform to use stdout-path

[U-Boot] [PATCH 1/2] mmc: sdhci: Clear high speed if not supported
 2016-01-14 13:38 UTC  (2+ messages)
` [U-Boot] [PATCH 2/2] mmc: zynq_sdhci: Added qurik to disable high speed

[U-Boot] [PATCH] sdhci: zynq: Remove hardcoded value zero as min frequency
 2016-01-14 13:37 UTC 

[U-Boot] [PATCH] net: zynq: Change MDC setup for arm64
 2016-01-14 13:37 UTC 

[U-Boot] [PATCH] net: phy: ti: Enable automatic crossover mode
 2016-01-14 13:36 UTC 

[U-Boot] [PATCH 1/2] serial: zynq: Extend compatible string list
 2016-01-14 13:36 UTC  (2+ messages)
` [U-Boot] [PATCH 2/2] serial: zynq: Fix address reading from DM

[U-Boot] [PATCH 1/3] fpga: xilinx: Check for substring in device ID validation
 2016-01-14 13:35 UTC  (3+ messages)
` [U-Boot] [PATCH 2/3] fpga: Add bitstream type BIT_NONE
` [U-Boot] [PATCH 3/3] fpga: Fix compilation warnings

[U-Boot] Please pull u-boot-marvell/master
 2016-01-14 13:28 UTC 

[U-Boot] [PATCH v2 resend] cmd_boot: Add a poweroff command
 2016-01-14 13:22 UTC  (2+ messages)
` [U-Boot] [U-Boot,v2,resend] "

[U-Boot] [PATCH] common: env_flags: fix loop condition when using env_flags_varaccess_mask
 2016-01-14 13:22 UTC  (3+ messages)
` [U-Boot] "

[U-Boot] [PATCH V2] common: cli_simple: use strlcpy instead of strcpy
 2016-01-14 13:22 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH] net: lpc32xx: fix ignored MDIO busy wait status on read
 2016-01-14 13:22 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH 2/2] sniper: Mux configuration cleanup
 2016-01-14 13:22 UTC  (2+ messages)
` [U-Boot] [U-Boot,2/2] "

[U-Boot] [PATCH 1/2] sniper: Various boot-related env settings, devicetree support
 2016-01-14 13:22 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH] lpc32xx: devkit3250: update board configuration file
 2016-01-14 13:22 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH v2 3/3] arm: lpc32xx: switch SPL builds to driver model
 2016-01-14 13:21 UTC  (2+ messages)
` [U-Boot] [U-Boot, v2, "

[U-Boot] [PATCH v2 2/3] arm: lpc32xx: switch serial console to driver model
 2016-01-14 13:21 UTC  (2+ messages)
` [U-Boot] [U-Boot, v2, "

[U-Boot] [PATCH v2 1/3] serial: lpc32xx hsuart: port driver to driver model
 2016-01-14 13:21 UTC  (2+ messages)
` [U-Boot] [U-Boot, v2, "

[U-Boot] [PATCH] test/fs: error case fixes/enhancements
 2016-01-14 13:21 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH 3/3] omap4_panda: Convert to config_distro_bootcmd.h
 2016-01-14 13:21 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH 2/3] ti_armv7_common.h: Add CONFIG_CMD_EXT4_WRITE
 2016-01-14 13:21 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH 1/3] am335x_evm.h: unsed CONFIG_BOOTDELAY
 2016-01-14 13:21 UTC  (2+ messages)
` [U-Boot] [U-Boot,1/3] "

[U-Boot] [PATCH] ext4_common.c: Clean up failure cases in alloc_triple_indirect_block
 2016-01-14 13:21 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH 3/3] ums: support multiple LUNs at once
 2016-01-14 13:21 UTC  (2+ messages)
` [U-Boot] [U-Boot,3/3] "

[U-Boot] [PATCH 2/3] mmc: store hwpart in the block device
 2016-01-14 13:21 UTC  (2+ messages)
` [U-Boot] [U-Boot,2/3] "

[U-Boot] [PATCH 1/3] block: pass block dev not num to read/write/erase()
 2016-01-14 13:20 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH] Re-enable setexpr on Raspberry Pi
 2016-01-14 13:20 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH v7 2/2] arm: move gd handling outside of C code
 2016-01-14 13:20 UTC  (2+ messages)
` [U-Boot] [U-Boot, v7, "

[U-Boot] [PATCH v7 1/2] Fix board init code to respect the C runtime environment
 2016-01-14 13:20 UTC  (2+ messages)
` [U-Boot] [U-Boot, v7, "

[U-Boot] [PATCH] hash.c: Conditionally compile hash_command, static hash_show
 2016-01-14 13:20 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [GIT PULL] SPL_DM_SEQ_ALIAS changes
 2016-01-14 13:20 UTC  (2+ messages)

[U-Boot] Pull request: u-boot-net
 2016-01-14 13:20 UTC  (15+ messages)

[U-Boot] [PATCH] MAINTAINERS: Update Marvell custodianship
 2016-01-14 13:19 UTC  (5+ messages)

[U-Boot] [GIT PULL] Microblaze changes
 2016-01-14 13:17 UTC  (2+ messages)

[U-Boot] [PATCH 1/2] i2c: mvtwsi: Fix mvtwsi not working on sun6i and newer sunxi SoCs
 2016-01-14 13:06 UTC  (2+ messages)
` [U-Boot] [PATCH 2/2] sunxi: Add support for the I2C controller which is part of the PRCM

[U-Boot] [PATCH 00/50] rockchip: Add support for cros_ec keyboard
 2016-01-14 12:47 UTC  (55+ messages)
` [U-Boot] [PATCH 01/50] dm: clk: Add support for decoding clocks from the device tree
` [U-Boot] [PATCH 02/50] dm: core: Don't set pinctrl for pinctrl devices
` [U-Boot] [PATCH 03/50] dm: pinctrl: Add a function to parse PIN_CONFIG flags
` [U-Boot] [PATCH 04/50] dm: pmic: Add 'reg status' to show all regulators
` [U-Boot] [PATCH 05/50] dts: Bring in pinctrl device tree binding
` [U-Boot] [PATCH 06/50] power: Add base support for the RK808 PMIC
` [U-Boot] [PATCH 07/50] power: Add support for RK808 regulators
` [U-Boot] [PATCH 08/50] dm: Add a power sequencing uclass
` [U-Boot] [PATCH 09/50] rockchip: Avoid using MMC code when not booting from MMC
` [U-Boot] [PATCH 10/50] rockchip: Convert the PMU IOMUX registers into an array
` [U-Boot] [PATCH 11/50] rockchip: mmc: Use a pwrseq device if available
` [U-Boot] [PATCH 12/50] rockchip: Correct the defconfig order
` [U-Boot] [PATCH 13/50] rockchip: Use pwrseq for MMC start-up on jerry
` [U-Boot] [PATCH 14/50] rockchip: jerry: Disable pmic-int-1 setup to avoid a hang
` [U-Boot] [PATCH 15/50] rockchip: Use a separate clock ID for clocks
` [U-Boot] [PATCH 16/50] rockchip: clock: Rename the general clock variable to gclk_rate
` [U-Boot] [PATCH 17/50] rockchip: clk: Add a function to get a peripheral clock rate
` [U-Boot] [PATCH 18/50] rockchip: clock: Add a function to find a clock by ID
` [U-Boot] [PATCH 19/50] rockchip: i2c: Update the driver to use the new clock ID
` [U-Boot] [PATCH 20/50] rockchip: spi: "
` [U-Boot] [PATCH 21/50] rockchip: spi: Avoid setting the pinctrl twice
` [U-Boot] [PATCH 22/50] rockchip: mmc: Update the driver to use the new clock ID
` [U-Boot] [PATCH 23/50] rockchip: pinctrl: Add a full pinctrl driver
` [U-Boot] [PATCH 24/50] rockchip: Move firefly and jerry to use the full pinctrl
` [U-Boot] [PATCH 25/50] rockchip: jerry: Enable the RK808 PMIC and regulator
` [U-Boot] [PATCH 26/50] rockchip: Disable simple-bus in SPL for firefly-rk3288, jerry
` [U-Boot] [PATCH 27/50] rockchip: jerry: Drop unused options
` [U-Boot] [PATCH 28/50] gpio: Allow 's' as an abbreviation for 'status'
` [U-Boot] [PATCH 29/50] cros_ec: Disable the Chrome OS EC in SPL
` [U-Boot] [PATCH 30/50] dm: i2c: Allow muxes to be enabled for SPL separately
` [U-Boot] [PATCH 31/50] spi: Correct device tree usage in spi_flash_decode_fdt()
` [U-Boot] [PATCH 32/50] dm: power: Allow regulators to be omitted from SPL
` [U-Boot] [PATCH 33/50] dm: pinctrl: Add a way for a GPIO driver to obtain a pin function
` [U-Boot] [PATCH 34/50] dm: core: Export uclass_find_device_by_of_offset()
` [U-Boot] [PATCH 35/50] dm: power: Tidy up debugging output and return values
` [U-Boot] [PATCH 36/50] dm: power: Allow regulators to not implement all operations
` [U-Boot] [PATCH 37/50] dm: clk: Add a simple version of clk_get_by_index()
` [U-Boot] [PATCH 38/50] rockchip: sdram: Use the rk_clr/setreg() interface
` [U-Boot] [PATCH 39/50] rockchip: reset: "
` [U-Boot] [PATCH 40/50] rockchip: spi: Remember the last speed to avoid re-setting it
` [U-Boot] [PATCH 41/50] rockchip: spi: Correct the bus init code
` [U-Boot] [PATCH 42/50] rockchip: clk: Make rkclk_get_clk() SoC-specific
` [U-Boot] [PATCH 43/50] rockchip: pinctrl: Reduce the size for SPL
` [U-Boot] [PATCH 44/50] rockchip: pinctrl: Implement the get_gpio_mux() method
` [U-Boot] [PATCH 45/50] rockchip: gpio: Read the GPIO value correctly
` [U-Boot] [PATCH 46/50] rockchip: gpio: Implement the get_function() method
` [U-Boot] [PATCH 47/50] rockchip: spi: Implement the delays
` [U-Boot] [PATCH 48/50] rockchip: spi: Correct chip-enable code
` [U-Boot] [PATCH 49/50] rockchip: spi: Remove the explicit pinctrl setting
` [U-Boot] [PATCH 50/50] rockchip: jerry: Enable the Chrome OS EC

[U-Boot] [PATCH] ls2-2085a: Increase default hugepage count
 2016-01-14 12:42 UTC  (2+ messages)
` [U-Boot] [PATCH] ls2-2085ardb: Correct the model name of ls2085ardb

[U-Boot] [PATCH] ls2-2085a: Increase default hugepage count
 2016-01-14 12:34 UTC  (2+ messages)
` [U-Boot] [PATCH] ls2-2085ardb: Correct the model name of ls2085ardb

[U-Boot] [PATCH] ls2-2085a: Increase default hugepage count
 2016-01-14 12:32 UTC  (2+ messages)
` [U-Boot] [PATCH] ls2-2085ardb: Correct the model name of ls2085ardb

[U-Boot] [PATCH v3 00/14] Initial Microchip PIC32MZ[DA] Support
 2016-01-14 12:30 UTC  (41+ messages)
` [U-Boot] [PATCH v3 01/14] MIPS: initialize board_init_f() argument to zero
` [U-Boot] [PATCH v3 03/14] drivers: clk: Add clock driver for Microchip PIC32 Microcontroller
` [U-Boot] [PATCH v3 05/14] drivers: gpio: add driver for Microchip PIC32 GPIO controller
` [U-Boot] [PATCH v3 06/14] drivers: serial: add driver for Microchip PIC32 UART controller
` [U-Boot] [PATCH v3 08/14] MIPS: Add support for Microchip PIC32MZ[DA] SoC family
` [U-Boot] [PATCH v3 09/14] board: Add Microchip PIC32MZ[DA]-Starter-Kit board
` [U-Boot] [PATCH v3 10/14] drivers: mmc: add driver for Microchip PIC32 SDHCI controller
` [U-Boot] [PATCH v3 11/14] board: add SDHCI support for PIC32MZDASK board
` [U-Boot] [PATCH v3 13/14] drivers: net: Add ethernet driver for Microchip PIC32

[U-Boot] [PATCH 1/2] clk: add static qualifier to local functions
 2016-01-14 11:36 UTC  (5+ messages)
` [U-Boot] [PATCH 2/2] clk: change the type of return value to long

[U-Boot] [PATCH] powerpc/83xx: fix build failure
 2016-01-14 10:45 UTC 

[U-Boot] [PATCH 1/2] Revert "powerpc/mpc85xx: SECURE BOOT - Bypass PAMU in case of secure boot"
 2016-01-14  8:41 UTC  (2+ messages)
` [U-Boot] [PATCH 2/2] powerpc/SECURE_BOOT: Add PAMU driver

[U-Boot] [PATCH v2 0/9] arm: ls1021atwr: Convert to driver model and enable serial support
 2016-01-14  8:14 UTC  (11+ messages)
` [U-Boot] [PATCH v2 1/9] Revert "fdt_support: Add multi-serial support for stdout fixup"
` [U-Boot] [PATCH v2 2/9] arm: ls1021atwr: Convert to driver model and enable serial support
` [U-Boot] [PATCH v2 3/9] serial: lpuart: Move CONFIG_FSL_LPUART to Kconfig
` [U-Boot] [PATCH v2 4/9] serial: lpuart: Fix several cosmetic issues
` [U-Boot] [PATCH v2 5/9] serial: lpuart: Call local version of setbrg and putc directly
` [U-Boot] [PATCH v2 6/9] serial: lpuart: Prepare the driver for DM conversion
` [U-Boot] [PATCH v2 7/9] serial: lpuart: Add driver model serial support
` [U-Boot] [PATCH v2 8/9] arm: ls1021atwr: Split off board device tree
` [U-Boot] [PATCH v2 9/9] arm: ls1021atwr: Enable driver model lpuart serial driver

[U-Boot] [PATCH 0/8] arm: ls1021atwr: Convert to driver model and enable serial support
 2016-01-14  8:10 UTC  (26+ messages)
` [U-Boot] [PATCH 1/8] fdt: Fix up stdout correctly in fdt_fixup_stdout()
` [U-Boot] [PATCH 6/8] serial: lpuart: Prepare the driver for DM conversion
` [U-Boot] [PATCH 7/8] serial: lpuart: Add driver model serial support

[U-Boot] [PATCH] image: fix getenv_bootm_size() function
 2016-01-14  5:50 UTC  (3+ messages)

[U-Boot] [PATCH v3 2/2] usb: eth: add Realtek RTL8152B/RTL8153 driver
 2016-01-14  5:37 UTC  (5+ messages)
` [U-Boot] [PATCH v4 2/2] usb: eth: add Realtek RTL8152B/RTL8153 DRIVER

[U-Boot] [Patch V3 0/3] LS1043AQDS SPI related patches
 2016-01-14  4:26 UTC  (6+ messages)
` [U-Boot] [Patch V3 3/3] armv8/ls1043aqds: add QSPI boot support

[U-Boot] [PATCH 1/2] arm: imx6: Add DDR3 calibration code for MX6 Q/D/DL
 2016-01-14  3:06 UTC  (8+ messages)

[U-Boot] [PATCH v4 0/6] rockchip: kylin: Boot with android boot image
 2016-01-14  2:31 UTC  (7+ messages)
` [U-Boot] [PATCH v4 1/6] common/image-fdt.c: Make boot_get_fdt() perform a check for Android images
` [U-Boot] [PATCH v4 5/6] rockchip: kylin: Enable boot with android boot image

[U-Boot] [PATCH] imx: mx6/7 define CONFIG_SYS_VSNPRINTF
 2016-01-14  2:24 UTC  (4+ messages)

[U-Boot] [PATCH v5 0/6] rockchip: kylin: Boot with android boot image
 2016-01-14  2:19 UTC  (7+ messages)
` [U-Boot] [PATCH v5 1/6] ARM: bootm: Try to use relocated ramdisk
` [U-Boot] [PATCH v5 2/6] rockchip: rk3036: Bind GPIO banks
` [U-Boot] [PATCH v5 3/6] rockchip: kylin: Add default gpt partition table
` [U-Boot] [PATCH v5 4/6] rockchip: kylin: Enable boot with android boot image
` [U-Boot] [PATCH v5 5/6] rockchip: kylin: Check fastboot request
` [U-Boot] [PATCH v5 6/6] rockchip: kylin: Store env in emmc

[U-Boot] [PATCH 0/4 v4] arm: socfpga: Add Cadence QSPI support
 2016-01-14  2:17 UTC  (4+ messages)
` [U-Boot] [PATCH 1/4 v4] spi: Add Cadence QSPI DM driver used by SoCFPGA

[U-Boot] [PATCH 00/17] arm: ls1021atwr: Convert to use driver model TSEC driver
 2016-01-14  1:57 UTC  (6+ messages)
` [U-Boot] [PATCH 16/17] arm: ls1021atwr: Disable CONFIG_E1000 temporarily

[U-Boot] [PATCH 01/10] video: Add S3C24xx framebuffer support
 2016-01-14  1:41 UTC  (4+ messages)
` [U-Boot] [PATCH 07/10] mtd: nand: s3c: Add missing correction and select_chip functions

[U-Boot] [PATCH] igep00x0: Falcon mode
 2016-01-14  0:44 UTC 

[U-Boot] [PATCH] usb: add clock support for generic EHCI
 2016-01-13 23:58 UTC  (4+ messages)

[U-Boot] [PATCH] gunzip.c: Only include gzwrite on CONFIG_CMD_UNZIP
 2016-01-13 23:17 UTC 

[U-Boot] [PATCH] gdsys: Drop print_fpga_state function
 2016-01-13 23:12 UTC 

[U-Boot] 2TB disks
 2016-01-13 21:55 UTC  (3+ messages)
` [U-Boot] [PATCH] Don't wrap to negative after 2G sectors

[U-Boot] [PATCH 00/18] dm: video: Introduce initial driver-model video support
 2016-01-13 21:55 UTC  (11+ messages)
` [U-Boot] [PATCH 01/18] tiny-printf: Always print zeroes
` [U-Boot] [PATCH 02/18] sandbox: Support the bmp command
` [U-Boot] [PATCH 03/18] dm: core: Call uclass post_bind() after the driver's bind() method
` [U-Boot] [PATCH 04/18] bzip2: Support compression for sandbox

[U-Boot] Please pull u-boot-x86
 2016-01-13 21:55 UTC  (2+ messages)

[U-Boot] [PATCH] image: check "bootm_low" and "bootm_size" if "initrd_high" is missing
 2016-01-13 21:55 UTC  (2+ messages)

[U-Boot] Pull request: u-boot-spi/master
 2016-01-13 21:54 UTC  (2+ messages)

[U-Boot] [PATCH] patman: Add --thread option
 2016-01-13 21:39 UTC 

[U-Boot] [PATCH 00/11] imx: introduce rdc and boot auxiliary core
 2016-01-13 20:45 UTC  (5+ messages)
` [U-Boot] [PATCH 06/11] imx: imx-common: introduce "

[U-Boot] [PATCHv2 1/3] arm: socfpga: add reset manager defines for Arria10
 2016-01-13 20:37 UTC  (4+ messages)

[U-Boot] [PATCH v1 00/16] Add support for 96boards Dragonboard410C board
 2016-01-13 20:32 UTC  (5+ messages)
` [U-Boot] [PATCH v1 16/16] board: Add Qualcomm Dragonboard 410C support

[U-Boot] [PATCH 1/7] devicetree: use wildcard to clean arch subdir
 2016-01-13 20:10 UTC  (3+ messages)
` [U-Boot] [PATCH v2 1/9] "

[U-Boot] [PATCH v3 0/6] rockchip: kylin: Boot with android boot image
 2016-01-13 20:10 UTC  (3+ messages)
` [U-Boot] [PATCH v3 6/6] rockchip: kylin: Check fastboot request

[U-Boot] [PATCH v3] dm: core: Add option to configure an offset for the address translation
 2016-01-13 20:10 UTC  (4+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox