messages from 2016-04-09 18:40:14 to 2016-04-11 13:06:52 UTC [more...]
[U-Boot] [uboot] [PATCH v5 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
2016-04-11 13:06 UTC (10+ messages)
` [U-Boot] [uboot] [PATCH v5 2/7] net: zynq_gem: Add the passing of the "
` [U-Boot] [uboot] [PATCH v5 3/7] net: phy: dp83867: Add device tree bindings and documentation
` [U-Boot] [uboot] [PATCH v5 4/7] net: phy: ti: Allow the driver to be more configurable
` [U-Boot] [uboot] [PATCH v5 5/7] net: phy: Move is_rgmii helper to phy.h
` [U-Boot] [uboot] [PATCH v5 6/7] net: phy: Add phy_interface_is_sgmii "
` [U-Boot] [uboot] [PATCH v5 7/7] net: phy: dp83867: Add SGMII helper for configuration
[U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig
2016-04-11 12:56 UTC (3+ messages)
[U-Boot] [PATCH v2 1/2] i2c: Describe Cadence I2C devicetree bindings
2016-04-11 12:55 UTC (2+ messages)
` [U-Boot] [PATCH v2 2/2] dm: i2c: Add driver for Cadence I2C IP
[U-Boot] [RFC 0/2] Add cdns-i2c driver as drop in for zynq-i2c
2016-04-11 12:50 UTC (4+ messages)
` [U-Boot] [RFC 2/2] dm: i2c: Add driver for Cadence I2C IP
[U-Boot] [PATCH] dm: gpio: pca953x: introduce driver model support for pca953x
2016-04-11 12:40 UTC (5+ messages)
[U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
2016-04-11 12:29 UTC (15+ messages)
[U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral
2016-04-11 12:20 UTC (7+ messages)
[U-Boot] [uboot] [PATCH 1/7] drivers: net: cpsw: Add readinf of DT phy-handle node
2016-04-11 12:16 UTC (24+ messages)
` [U-Boot] [uboot] [PATCH 2/7] net: zynq_gem: Add the passing of the "
` [U-Boot] [uboot] [PATCH v4 3/7] net: phy: dp83867: Add device tree bindings and documentation
` [U-Boot] [uboot] [PATCH v4 4/7] net: phy: ti: Allow the driver to be more configurable
` [U-Boot] [uboot] [PATCH 5/7] net: phy: Move is_rgmii helper to phy.h
` [U-Boot] [uboot] [PATCH 6/7] net: phy: Add phy_interface_is_sgmii "
` [U-Boot] [uboot] [PATCH 7/7] net: phy: dp83867: Add SGMII helper for configuration
[U-Boot] [PATCH] buildman: allow more incremental building
2016-04-11 12:04 UTC (3+ messages)
[U-Boot] [PATCH] lib/crc8: Add crc start value
2016-04-11 12:00 UTC (2+ messages)
[U-Boot] [PATCH] GPIO: pca953x: Remove compilation warnings on arm64
2016-04-11 11:53 UTC
[U-Boot] [PATCH] ARM64: zynqmp: Enable pca953x driver for zcu102
2016-04-11 11:52 UTC
[U-Boot] Ethernet via USB on Sinlinx SinA33
2016-04-11 11:32 UTC (7+ messages)
[U-Boot] [PATCH] USB: g_dnl: Change device class
2016-04-11 11:21 UTC (2+ messages)
[U-Boot] [PATCH 01/10] ddr: altera: Replace ad-hoc constant with macro
2016-04-11 11:05 UTC (3+ messages)
` [U-Boot] [PATCH 09/10] ddr: altera: Staticize global variables
[U-Boot] [PATCH] usb: ums - expose selected partition/s
2016-04-11 10:28 UTC (2+ messages)
[U-Boot] is there an official MAINTAINER for u-boot POST support?
2016-04-11 10:08 UTC
[U-Boot] [PATCH 1/7] gpio: zynq: Convert Zynq GPIO to driver model
2016-04-11 10:00 UTC (7+ messages)
` [U-Boot] [PATCH 2/7] gpio: Kconfig: Enable Zynq GPIO driver using kconfig
` [U-Boot] [PATCH 3/7] gpio: zynq: Remove non driver model code
` [U-Boot] [PATCH 4/7] gpio: zynq: Move the definitions to driver file
` [U-Boot] [PATCH 5/7] gpio: zynqmp: Add GPIO driver support for ZynqMP
` [U-Boot] [PATCH 6/7] zynqmp: Kconfig: Enable ZYNQ_GPIO "
` [U-Boot] [PATCH 7/7] ARM64: zynqmp: Enable CMD_GPIO and DM_GPIO for ep108
[U-Boot] [PATCH] spl: mmc: raw: Try to load u-boot if Linux image is not found
2016-04-11 9:54 UTC
[U-Boot] [PATCH] ARM64: zynqmp: Remove netdev.h from board file
2016-04-11 9:48 UTC
[U-Boot] [PATCH] ARM64: zynqmp: Add defconfig for zcu102 revB board
2016-04-11 9:05 UTC
[U-Boot] [PATCH] Revert "T2080QDS/PCIe: Soft Reset PCIe on T2080QDS for down-training issue"
2016-04-11 8:53 UTC
[U-Boot] [PATCH 1/3] tests: py: dfu: Add global variables to store dfu alt numbers for test and dummy files
2016-04-11 8:42 UTC (4+ messages)
` [U-Boot] [PATCH 3/3] tests: py: dfu: Provide functionality to set test and dummy files alt settings
[U-Boot] [PATCH 0/3] ARM: at91: sama5d2_xplained: change SDHCI GCK's clock source to UPLL
2016-04-11 8:41 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] ARM: at91: clock: fix the GCK's clock source
` [U-Boot] [PATCH 2/3] ARM: at91: clock: complete the GCK's clock sources
` [U-Boot] [PATCH 3/3] board: sama5d2_xplained: change SDHCI GCK's clock source to UPLL
[U-Boot] [PATCH v8 1/9] mips: add base support for QCA/Atheros ath79 SOCs
2016-04-11 7:57 UTC (5+ messages)
` [U-Boot] [PATCH v8 6/9] drivers: serial: add serial driver for ar933x SOC
[U-Boot] [PATCH] armv8/fdt: add fixup_crypto_node
2016-04-11 7:42 UTC
[U-Boot] [PATCH] board: atmel: sama5d2_xplained: fix the missing pin config of SDMMC0
2016-04-11 6:07 UTC
[U-Boot] [PATCH] dm: spi: Read default speed, mode values from DT
2016-04-11 6:01 UTC (5+ messages)
[U-Boot] [PATCH 00/11] cpsw: enable DM_ETH on dra74 and am437x evms
2016-04-11 5:54 UTC (8+ messages)
` [U-Boot] [PATCH 02/11] lib: fdtdec: fix size cell and address cell parse from DT
` [U-Boot] [PATCH 03/11] ti_omap5_common: eth: do not define DM_ETH for spl
[U-Boot] [PATCH 1/2] dm: spi: soft_spi: support linux way and bug fix
2016-04-11 5:45 UTC (6+ messages)
` [U-Boot] [PATCH 2/2] dm: gpio: introduce 74x164 driver
[U-Boot] [PATCH v2 0/2] spl: Add support to load FIT from Filesystem
2016-04-11 5:42 UTC (5+ messages)
` [U-Boot] [PATCH v2 1/2] spl: Add an option to load a FIT containing U-Boot from FS
` [U-Boot] [PATCH v2 2/2] spl: Support loading a FIT from FAT FS
[U-Boot] [RFC 1/2] mmc: introduce mmc_power_init and pwrup hook function
2016-04-11 5:34 UTC (3+ messages)
[U-Boot] [PATCH v2 1/2] kconfig: Move CONFIG_OF_LIBFDT to Kconfig
2016-04-11 5:33 UTC (4+ messages)
` [U-Boot] [PATCH v2 2/2] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
[U-Boot] [PATCH 1/2] dm: gpio: mxc: fix mxc_gpio_bank_get_value
2016-04-11 5:28 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] dm: gpio: mxc: implement xlate function
[U-Boot] [PATCH] board: ti: am57xx: Add support for am572x idk in SPL
2016-04-11 5:20 UTC (2+ messages)
[U-Boot] [PATCH] board: ti: am57xx: Update EMIF SDRAM 1 and 3 Timings
2016-04-11 5:19 UTC (2+ messages)
[U-Boot] [PATCH 00/44] dm: blk: Add more driver-model support for block devices
2016-04-11 5:02 UTC (46+ messages)
` [U-Boot] [PATCH 01/44] Revert "dm: sandbox: Drop the pre-DM host implementation"
` [U-Boot] [PATCH 02/44] dm: sandbox: Add a board for sandbox without CONFIG_BLK
` [U-Boot] [PATCH 03/44] pci: Drop CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
` [U-Boot] [PATCH 04/44] dm: Rename disk uclass to ahci
` [U-Boot] [PATCH 05/44] Allow iotrace byte access to use an address of any size
` [U-Boot] [PATCH 06/44] sandbox: Add string and 16-bit I/O functions
` [U-Boot] [PATCH 07/44] sandbox: Add dummy SCSI functions
` [U-Boot] [PATCH 08/44] sandbox: Add dummy SATA functions
` [U-Boot] [PATCH 09/44] dm: scsi: Remove the forward declarations
` [U-Boot] [PATCH 10/44] dm: scsi: Fix up code style
` [U-Boot] [PATCH 11/44] dm: ide: Correct various code style problems
` [U-Boot] [PATCH 12/44] dm: ide: Remove the forward declarations
` [U-Boot] [PATCH 13/44] dm: sata: Fix code style problems in cmd/sata.c
` [U-Boot] [PATCH 14/44] dm: scsi: Rename CONFIG_CMD_SCSI to CONFIG_SCSI
` [U-Boot] [PATCH 15/44] dm: blk: Add a legacy block interface
` [U-Boot] [PATCH 16/44] dm: systemace: "
` [U-Boot] [PATCH 17/44] dm: sandbox: Add a legacy host "
` [U-Boot] [PATCH 18/44] dm: usb: Add a legacy block interface for USB storage
` [U-Boot] [PATCH 19/44] dm: mmc: Add a legacy block interface for MMC
` [U-Boot] [PATCH 20/44] dm: mmc: Add an implementation of the 'devnum' functions
` [U-Boot] [PATCH 21/44] dm: scsi: Separate the non-command code into its own file
` [U-Boot] [PATCH 22/44] dm: ide: "
` [U-Boot] [PATCH 23/44] dm: sata: "
` [U-Boot] [PATCH 24/44] dm: disk: Use legacy block driver info for block device access
` [U-Boot] [PATCH 25/44] dm: usb: Drop the get_dev() function
` [U-Boot] [PATCH 26/44] dm: ide: "
` [U-Boot] [PATCH 27/44] dm: mmc: "
` [U-Boot] [PATCH 28/44] dm: scsi: "
` [U-Boot] [PATCH 29/44] dm: sata: "
` [U-Boot] [PATCH 30/44] dm: systemace: "
` [U-Boot] [PATCH 31/44] dm: blk: Drop the systemace.h header
` [U-Boot] [PATCH 32/44] dm: sandbox: Drop the host_get_dev() function
` [U-Boot] [PATCH 33/44] dm: part: Drop the get_dev() method
` [U-Boot] [PATCH 34/44] dm: ide: Add support for driver-model block devices
` [U-Boot] [PATCH 35/44] dm: sandbox: Enable IDE
` [U-Boot] [PATCH 36/44] dm: scsi: Add support for driver-model block devices
` [U-Boot] [PATCH 37/44] dm: sandbox: Enable SCSI
` [U-Boot] [PATCH 38/44] dm: sata: Add support for driver-model block devices
` [U-Boot] [PATCH 39/44] dm: sandbox: Enable SATA
` [U-Boot] [PATCH 40/44] dm: blk: Allow blk_create_device() to allocate the device number
` [U-Boot] [PATCH 41/44] dm: blk: Add a easier way to create a named block device
` [U-Boot] [PATCH 42/44] dm: systemace: Reorder function to avoid forward declarataions
` [U-Boot] [PATCH 43/44] dm: systemace: Add driver-mode block-device support
` [U-Boot] [PATCH 44/44] dm: sandbox: Enable systemace
[U-Boot] [PATCH 2/6 v3] i2c: designware_i2c: Add dw_i2c_enable() helper function
2016-04-11 4:33 UTC (2+ messages)
[U-Boot] [PATCH 0/6] Remove calls from net drivers to legacy miiphy_register() entry-point
2016-04-11 4:23 UTC (11+ messages)
` [U-Boot] [PATCH 1/6] common: Always include errno.h in common.h
` [U-Boot] [PATCH 3/6] net: mii: Use spatch to update miiphy_register
` [U-Boot] [PATCH 4/6] net: mii: Changes not made by spatch
` [U-Boot] [PATCH 5/6] net: mii: Fix changes "
` [U-Boot] [PATCH 6/6] net: mii: Clean up legacy glue that is not used
[U-Boot] [PATCH] armv8/ls2080a: configure PMU's PCTBENR to enable WDT
2016-04-11 2:44 UTC (3+ messages)
[U-Boot] [PATCH v2] armv8/ls2080a: configure PMU's PCTBENR to enable WDT
2016-04-11 2:37 UTC
[U-Boot] [PATCH v2 1/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
2016-04-11 2:19 UTC (2+ messages)
[U-Boot] Newbie SPL question for socfpga_sockit
2016-04-11 2:03 UTC (24+ messages)
[U-Boot] [PATCH] serial: add BCM283x mini UART driver
2016-04-11 1:17 UTC (5+ messages)
[U-Boot] [PATCH 00/23] dm: mmc: Add driver-model block-device support to MMC
2016-04-11 1:12 UTC (24+ messages)
` [U-Boot] [PATCH 01/23] dm: blk: Fix allocation of block-device numbering
` [U-Boot] [PATCH 02/23] dm: core: Allow device names to be freed automatically
` [U-Boot] [PATCH 03/23] dm: blk: Free the block device name when unbound
` [U-Boot] [PATCH 04/23] dm: mmc: Move mmc_switch_part() above its callers
` [U-Boot] [PATCH 05/23] dm: mmc: Implement the select_hwpart() method
` [U-Boot] [PATCH 06/23] dm: mmc: Add a function to obtain the block device
` [U-Boot] [PATCH 07/23] dm: mmc: spl: Use the legacy block interface in SPL
` [U-Boot] [PATCH 08/23] dm: mmc: Use the new select_hwpart() API
` [U-Boot] [PATCH 09/23] dm: blk: Add functions to select a hardware partition
` [U-Boot] [PATCH 10/23] dm: part: Use the legacy block driver for hardware partition support
` [U-Boot] [PATCH 11/23] dm: part: Drop the block_drvr table
` [U-Boot] [PATCH 12/23] dm: blk: Add a comment as to why the bdev member is needed
` [U-Boot] [PATCH 13/23] dm: mmc: Set up the device pointer when using the MMC uclass
` [U-Boot] [PATCH 14/23] dm: mmc: Move the device list into a separate file
` [U-Boot] [PATCH 15/23] dm: blk: Use the correct error code for blk_get_device_by_str()
` [U-Boot] [PATCH 16/23] dm: mmc: Adjust mmc_switch_part() to use a struct mmc
` [U-Boot] [PATCH 17/23] dm: sandbox: Only enable the sandbox MMC driver when valid
` [U-Boot] [PATCH 18/23] dm: mmc: Implement the MMC functions for block devices
` [U-Boot] [PATCH 19/23] dm: mmc: Add a way to bind MMC devices with driver model
` [U-Boot] [PATCH 20/23] dm: mmc: Add support for driver-model block devices
` [U-Boot] [PATCH 21/23] dm: mmc: sandbox: Add an SD-card emulation
` [U-Boot] [PATCH 22/23] dm: sandbox: mmc: Enable building MMC code for sandbox
` [U-Boot] [PATCH 23/23] dm: mmc: test: Add tests for MMC
[U-Boot] [PATCH v3 0/2] Amlogic Meson GXBaby and ODROID-C2 support
2016-04-11 0:08 UTC (5+ messages)
` [U-Boot] [PATCH v3 1/2] net: designware: fix descriptor layout and warnings on 64-bit archs
` [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
[U-Boot] [PATCH] efi_loader: Always flush in cache line size granularity
2016-04-10 22:36 UTC (4+ messages)
[U-Boot] [PULL] u-boot-socfpga/master
2016-04-10 19:18 UTC
[U-Boot] [PULL] u-boot-usb/master
2016-04-10 19:17 UTC
[U-Boot] [PATCH 0/4] QEMU (qemu-mips) and MIPS 64-bit changes
2016-04-10 18:43 UTC (2+ messages)
[U-Boot] [PATCH v3 1/2] flash: add device ID for Microchip PIC32 internal flash
2016-04-10 18:37 UTC (4+ messages)
` [U-Boot] [PATCH v3 2/2] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver
[U-Boot] [PATCH v5 0/4] This series add MUSB support on PIC32MZDA Starter Kit
2016-04-10 17:44 UTC (6+ messages)
` [U-Boot] [PATCH v5 1/4] arm: add missing writes[bwql], reads[bwql]
[U-Boot] [PATCH] mips: Report reloc information in bdinfo
2016-04-10 17:33 UTC (2+ messages)
[U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
2016-04-10 15:55 UTC (16+ messages)
` [U-Boot] [PATCH 0/7] Handle GPIO_ACTIVE_LOW in gpio-uclass
` [U-Boot] [PATCH 7/7] gpio: tegra: remove flags parsing in xlate routine
[U-Boot] [PATCH v2 0/9] Amlogic Meson GXBaby and ODROID-C2 support
2016-04-10 15:35 UTC (4+ messages)
` [U-Boot] [PATCH v2 9/9] board: odroid-c2: add Ethernet support
[U-Boot] [PATCH] armv8: ls2080a: Update MAINTAINERS file
2016-04-10 14:56 UTC
[U-Boot] ext4 and caching
2016-04-10 14:31 UTC (9+ messages)
` [U-Boot] [RFC PATCH 0/2] simple cache layer for block devices
` [U-Boot] [RFC PATCH 2/2] mmc: add support for block device cache
[U-Boot] [PATCH] bugfix: unlock current sector instead of sector 0 before, buffered write
2016-04-10 11:38 UTC
[U-Boot] [PATCH] sunxi: H3: Do not clear usb companion clk-gate / reset on remove
2016-04-10 8:45 UTC (3+ messages)
[U-Boot] [PATCH] sunxi: Add defconfig and dts file for Orange Pi One SBC
2016-04-10 8:18 UTC (2+ messages)
[U-Boot] [PATCH RESEND 0/2] cmd: fdt: Add device tree overlays support
2016-04-09 18:40 UTC (3+ messages)
` [U-Boot] [PATCH RESEND 2/2] cmd: fdt: add fdt overlay application subcommand
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox