public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
 messages from 2016-11-05 16:09:12 to 2016-11-08 10:13:39 UTC [more...]

[U-Boot] [PATCH 0/4] enable the host controller for rk3036
 2016-11-08 10:13 UTC  (2+ messages)
` [U-Boot] [PATCH 1/4] config: rk3036: enable configs for USB HOST

[U-Boot] [PATCH v2 0/4] serial: pxa: kconfig and optional driver model integration
 2016-11-08  9:34 UTC  (5+ messages)
` [U-Boot] [PATCH v2 1/4] serial: pxa: use kconfig for serial configuration
` [U-Boot] [PATCH v2 2/4] serial: pxa: integrate optional driver model handling
` [U-Boot] [PATCH v2 3/4] colibri_pxa270: drop edit, elf, fpga, hush, regex et al. for space reason
` [U-Boot] [PATCH v2 4/4] colibri_pxa270: transition to driver model for serial

[U-Boot] [PATCH] arm: ls1021a: improve the core frequency to 1.2GHZ
 2016-11-08  8:42 UTC 

[U-Boot] [PATCH] armv8: QSPI: Add AHB bus 16MB+ size support
 2016-11-08  6:03 UTC  (3+ messages)

[U-Boot] [PATCH] ls1021a: QSPI: update the node for QSPI support
 2016-11-08  6:01 UTC  (5+ messages)

[U-Boot] [PATCH v2] armv8: fsl-layerscape: Add Readme for deploy QSPI image
 2016-11-08  5:44 UTC  (3+ messages)

[U-Boot] [PATCH] driver: net: fsl-mc: Use aligned address for MC FW load
 2016-11-08  5:37 UTC  (3+ messages)

[U-Boot] 2016.09: FIT Image
 2016-11-08  5:34 UTC 

[U-Boot] [PATCH v5] efi_loader: console: Correctly report modes
 2016-11-08  5:03 UTC 

[U-Boot] [PATCH v5 00/21] sf: Updates on flash detection
 2016-11-08  4:52 UTC  (5+ messages)
` [U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux
` [U-Boot] [PATCH v5 21/21] sf: dataflash: Minor cleanups

[U-Boot] [PATCH] board/ls2080qds: add the procedure to deply QSPI image
 2016-11-08  3:54 UTC  (9+ messages)

[U-Boot] [PATCH 2/2] fs-test.sh: Update expected results
 2016-11-08  3:29 UTC  (4+ messages)
` [U-Boot] [PATCH v2 1/2] ext4: Allow reading files with non-zero offset, clamp read len

[U-Boot] [PATCH v3 0/3] Raspberry Pi EFI enablement
 2016-11-08  3:26 UTC  (11+ messages)
` [U-Boot] [PATCH v3 1/3] ARM: bcm283x: Implement EFI RTS reset_system
` [U-Boot] [PATCH v3 2/3] bcm2835 video: Map frame buffer as 32bpp
` [U-Boot] [PATCH v3 3/3] bcm2835: Reserve the spin table in efi memory map

[U-Boot] [PATCH v2] rpi: passthrough of the firmware provided FDT blob
 2016-11-08  3:14 UTC  (2+ messages)

[U-Boot] [PATCH 1/5] common/Kconfig: remove NOR_BOOT's depends on NOR
 2016-11-08  2:39 UTC  (5+ messages)
` [U-Boot] [PATCH 4/5] kconfig: fsl PPA: move CONFIG_* to Kconfig

[U-Boot] [PATCH 0/3] arm: Move TI/omap related code to arch/arm/mach-omap2
 2016-11-08  2:34 UTC  (4+ messages)
` [U-Boot] [PATCH 1/3] arm: Introduce ARCH_OMAP2
` [U-Boot] [PATCH 2/3] arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms
` [U-Boot] [PATCH 3/3] TI: Remove CONFIG_OMAP_COMMON in favor of CONFIG_ARCH_OMAP2

[U-Boot] [PATCH 1/1] ARM: ts4600: add basic board support
 2016-11-07 22:57 UTC  (9+ messages)
` [U-Boot] [PATCH v2 "

[U-Boot] [PATCH] net: use random ethernet address if invalid and not zero
 2016-11-07 22:25 UTC  (5+ messages)
` [U-Boot] "

[U-Boot] [PATCH] Add workaround for USB PHY errata
 2016-11-07 18:59 UTC  (3+ messages)
` [U-Boot] [PATCH] armv8: Add workaround for USB erratum A-009008

[U-Boot] [PATCH] armv8: ls2080aqds: fix SGMII repeater settings
 2016-11-07 18:42 UTC  (2+ messages)

[U-Boot] [PATCH] armv8/ls1043a: Add the OCRAM initialization
 2016-11-07 18:36 UTC  (9+ messages)

[U-Boot] [PATCH 1/9] dm: pci: return the real controller in pci_bus_to_hose()
 2016-11-07 18:13 UTC  (8+ messages)

[U-Boot] [PATCH] net: mvgbe: Fix build error with CONFIG_PHYLIB
 2016-11-07 17:31 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH v2] net: phy: micrel: center FLP burst timing at 16ms
 2016-11-07 17:31 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH 4/4] ARM: tegra: enable Ethernet on p2771-0000
 2016-11-07 17:31 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH 3/4] ARM: tegra: add DWC EQoS (ethernet) to Tegra186 DT
 2016-11-07 17:31 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH 2/4] ARM: tegra: configure Ethernet address on Tegra186
 2016-11-07 17:31 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH 1/4] ARM: tegra: add SoC-level hook for board_late_init()
 2016-11-07 17:31 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH V3 2/2] net: add driver for Synopsys Ethernet QoS device
 2016-11-07 17:31 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH V3 1/2] dt: net: add DWC EQoS binding
 2016-11-07 17:31 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] Pull request: u-boot-net.git master
 2016-11-07 17:29 UTC 

[U-Boot] [PATCH 1/3] fsl/ddr: Revise erratum a009942 and clean related erratum
 2016-11-07 17:04 UTC  (4+ messages)

[U-Boot] [PATCH v7 0/2] armv8: Support loading 32-bit OS in AArch32 execution state
 2016-11-07 16:56 UTC  (18+ messages)
` [U-Boot] [PATCH v7 1/2] "

[U-Boot] [PATCH v3 1/8] x86: Add implementations of setjmp() and longjmp()
 2016-11-07 16:32 UTC  (12+ messages)
` [U-Boot] [PATCH v3 2/8] efi: Use asmlinkage for EFIAPI
` [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program

[U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function
 2016-11-07 16:23 UTC  (12+ messages)

[U-Boot] [PATCH v4 00/14] efi: x86: Add EFI hello world and loader support for x86
 2016-11-07 15:47 UTC  (15+ messages)
` [U-Boot] [PATCH v4 01/14] x86: Correct a build warning in x86 tables
` [U-Boot] [PATCH v4 02/14] efi: Correct cache flush alignment
` [U-Boot] [PATCH v4 03/14] efi: Fix debug message address format
` [U-Boot] [PATCH v4 04/14] x86: Tidy up selection of building the EFI stub
` [U-Boot] [PATCH v4 05/14] efi: Makefile: Export variables for use with EFI
` [U-Boot] [PATCH v4 06/14] efi: Add support for a hello world test program
` [U-Boot] [PATCH v4 07/14] elf: arm: Add a few ARM relocation types
` [U-Boot] [PATCH v4 08/14] efi: arm: Add EFI app support
` [U-Boot] [PATCH v4 09/14] efi: arm: Add aarch64 "
` [U-Boot] [PATCH v4 10/14] efi: arm: Enable the hello world test program
` [U-Boot] [PATCH v4 11/14] x86: Move efi .lds files into the 'lib' directory
` [U-Boot] [PATCH v4 12/14] x86: Move efi .S "
` [U-Boot] [PATCH v4 13/14] efi: x86: Adjust EFI files support efi_loader
` [U-Boot] [PATCH v4 14/14] x86: Enable EFI loader support

[U-Boot] [PATCH 1/6] x86: Add implementations of setjmp() and longjmp()
 2016-11-07 15:46 UTC  (17+ messages)
` [U-Boot] [PATCH 3/6] arm: efi: Add a hello world test program
` [U-Boot] [PATCH 4/6] x86: efi: Add EFI loader support for x86

[U-Boot] [PATCH v2 1/8] x86: Add implementations of setjmp() and longjmp()
 2016-11-07 15:45 UTC  (11+ messages)
` [U-Boot] [PATCH v2 5/8] arm: efi: Add a hello world test program

[U-Boot] [PATCH v4 0/7] toradex: config block handling
 2016-11-07 13:36 UTC  (8+ messages)
` [U-Boot] [PATCH v4 1/7] Revert "generic-board: allow showing custom board info"
` [U-Boot] [PATCH v4 2/7] generic-board: make show_board_info a weak function
` [U-Boot] [PATCH v4 3/7] apalis/colibri_t20/t30: deactivate displaying board info
` [U-Boot] [PATCH v4 4/7] toradex: config block handling
` [U-Boot] [PATCH v4 5/7] apalis/colibri_imx7/pxa270/t20/t30/vf: integrate "
` [U-Boot] [PATCH v4 6/7] apalis/colibri_t30: move environment location
` [U-Boot] [PATCH v4 7/7] colibri_vf: usb gadget: toradex pid is now set generically

[U-Boot] [PATCH] tools: Makefile: improve cross_tools target usability
 2016-11-07 12:05 UTC  (3+ messages)

[U-Boot] [PATCH] evb-rk3399: deduced the dram node size when space reserved
 2016-11-07  9:40 UTC  (2+ messages)

[U-Boot] [PATCH 0/4] sunxi: Improve the SinA33 support
 2016-11-07  8:47 UTC  (7+ messages)
` [U-Boot] [PATCH 2/4] mmc: sunxi: Enable 8bits bus width for sun8i

[U-Boot] [PATCH 0/4] config: Add FreeBSD kconfig options
 2016-11-07  8:34 UTC  (5+ messages)
` [U-Boot] [PATCH 1/4] kconfig: Add API kconfig file
` [U-Boot] [PATCH 2/4] kconfig: arm: Add SYS_DCACHE_OFF option
` [U-Boot] [PATCH 3/4] kconfig: Add a FREEBSD option
` [U-Boot] [PATCH 4/4] distro_bootcmd: Add command to run FreeBSD

[U-Boot] [PATCH] config: evb-rk3399: enable PWM_ROCKCHIP
 2016-11-07  8:30 UTC 

[U-Boot] [PATCH v2 0/1] cmd: pci: add option to parse and display BAR information
 2016-11-07  6:55 UTC  (3+ messages)
` [U-Boot] [PATCH v2 1/1] "

[U-Boot] [PATCH 1/3 v2] fsl/ddr: Revise erratum a009942 and clean related erratum
 2016-11-07  6:11 UTC 

[U-Boot] [PATCH v3 0/5] Add ARMv8 PSCI framework
 2016-11-07  4:13 UTC  (6+ messages)
` [U-Boot] [PATCH v3 1/5] ARMv8: Enable SMC instruction
` [U-Boot] [PATCH v3 2/5] ARMv8: Add secure sections for PSCI text and data
` [U-Boot] [PATCH v3 3/5] ARMv8: Add basic PSCI framework
` [U-Boot] [PATCH v3 4/5] ARMv8: Setup PSCI memory and device tree
` [U-Boot] [PATCH v3 5/5] ARMv8: LS1043A: Enable LS1043A default PSCI support

[U-Boot] [PATCH v2 1/2] arm: print the cache config option in hex instead of decimal
 2016-11-07  4:07 UTC  (9+ messages)
` [U-Boot] [PATCH v2 2/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode

[U-Boot] Rockchip USB driver
 2016-11-07  2:59 UTC  (3+ messages)

[U-Boot] [PATCH] travis-ci: Try harder to build all ARM targets
 2016-11-07  1:17 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH] buildman: Fix building based on 'options' field
 2016-11-07  1:17 UTC  (3+ messages)
` [U-Boot] "

[U-Boot] [PATCH] mkimage: Allow including a ramdisk in FIT auto mode
 2016-11-07  1:16 UTC  (3+ messages)
` [U-Boot] "

[U-Boot] [PATCH] wandboard: Make Ethernet functional again
 2016-11-07  1:16 UTC  (3+ messages)
` [U-Boot] "

[U-Boot] [PATCH] tools: imximage: check return value when open the plugin file
 2016-11-07  1:15 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH] doc: update README.arm64
 2016-11-07  1:15 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH] armv8: define get_ticks() for the ARMv8 Generic Timer
 2016-11-07  1:14 UTC  (2+ messages)
` [U-Boot] "

[U-Boot] [PATCH v4 2/2] image: Protect against overflow in unknown_msg()
 2016-11-07  1:13 UTC  (2+ messages)
` [U-Boot] [U-Boot, v4, "

[U-Boot] [PATCH 3/4] colibri_pxa270: drop lzma support for space reason
 2016-11-07  1:13 UTC  (2+ messages)
` [U-Boot] [U-Boot, "

[U-Boot] [PATCH 1/2] ext4: Allow reading files with non-zero offset, clamp read len
 2016-11-06 17:12 UTC  (3+ messages)

[U-Boot] [PATCH v2 0/7] imx6: icorem6: Add framebuffer and I2C support
 2016-11-06 15:58 UTC  (2+ messages)

[U-Boot] [PATCH v7 0/5] net: fec_mxc: Convert to DM
 2016-11-06 15:54 UTC  (3+ messages)

[U-Boot] [PATCH v2 0/5] arm: imx6: Enable Secure Boot (HAB) with SPL Builds
 2016-11-06 15:37 UTC  (6+ messages)
` [U-Boot] [PATCH v2 1/5] arm: imx: remove bmode , hdmidet and dek commands from SPL
` [U-Boot] [PATCH v2 2/5] arm: imx: add HAB authentication of image to SPL boot
` [U-Boot] [PATCH v2 3/5] tools: mkimage: add firmware-ivt image type for HAB verification
` [U-Boot] [PATCH v2 4/5] doc: imx6: add section for secure boot with SPL
` [U-Boot] [PATCH v2 5/5] Makefile: preserve output for images that can contain HAB Blocks

[U-Boot] [PATCH] mx6sabresd: Make Ethernet functional again
 2016-11-06 11:59 UTC  (5+ messages)
` [U-Boot] "

[U-Boot] [PATCH 0/2] rpi: enable passthrough of FDT blob provided by the firmware
 2016-11-06 11:27 UTC  (9+ messages)
` [U-Boot] [PATCH 1/2] rpi: save firmware provided boot param for later use
` [U-Boot] [PATCH 2/2] rpi: expose the firmware provided FDT blob in ${fw_fdt_addr}

[U-Boot] [PATCH 1/3] test/py: expose config and log as session scoped fixture
 2016-11-06  3:17 UTC  (5+ messages)
` [U-Boot] [PATCH 2/3] test/py: Allow to pass u_boot_log instead of console for run_and_log
` [U-Boot] [PATCH 3/3] test/py: Create tests for ext4 and fat testing on sandbox

[U-Boot] [PATCH 0/5] arm: imx6: Enable Secure Boot (HAB) with SPL Builds
 2016-11-05 23:22 UTC  (6+ messages)
` [U-Boot] [PATCH 1/5] arm: imx: remove bmode , hdmidet and dek commands from SPL
` [U-Boot] [PATCH 2/5] arm: imx: add HAB authentication of image to SPL boot
` [U-Boot] [PATCH 3/5] tools: mkimage: add firmware-ivt image type for HAB verification
` [U-Boot] [PATCH 4/5] doc: imx6: add section for secure boot with SPL
` [U-Boot] [PATCH 5/5] Makefile: preserve output for images that can contain HAB Blocks

[U-Boot] [PATCH] api: Use hashtable function for API_env_enum
 2016-11-05 21:27 UTC 

[U-Boot] [PATCH] ext4: Fix handling of sparse files
 2016-11-05 21:17 UTC 

[U-Boot] [PATCH] sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICE
 2016-11-05 19:51 UTC 

[U-Boot] [PATCH v5 0/2] spl: Convert MMC raw mode sector options to Kconfig
 2016-11-05 18:25 UTC  (3+ messages)
` [U-Boot] [PATCH v5 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR "

[U-Boot] [PATCH 0/3] Create python filesystem tests
 2016-11-05 16:45 UTC 

[U-Boot] [PATCH v3] gpio: dwapb: Add support for port B
 2016-11-05 16:12 UTC  (2+ messages)

[U-Boot] [RFC PATCH 00/10] sunxi: Allwinner A64 SPL support
 2016-11-05 16:11 UTC  (7+ messages)
` [U-Boot] [RFC PATCH 02/10] Makefile: use "arm64" architecture for U-Boot image files
` [U-Boot] [RFC PATCH 08/10] SPL: read and store arch property from U-Boot image
` [U-Boot] [RFC PATCH 09/10] sunxi: introduce RMR switch to enter payloads in 64-bit mode

[U-Boot] [PATCH v9 00/21] dm: Generic MTD Subsystem/SPI-NOR
 2016-11-05 16:10 UTC  (31+ messages)
` [U-Boot] [PATCH v9 02/21] mtd: Add SPI-NOR core support
` [U-Boot] [PATCH v9 03/21] mtd: spi-nor: Kconfig: Add MTD_SPI_NOR entry
` [U-Boot] [PATCH v9 04/21] mtd: spi-nor: Kconfig: Add MTD_SPI_NOR_USE_4K_SECTORS
` [U-Boot] [PATCH v9 05/21] mtd: spi-nor: Kconfig: Add SPI_NOR_MISC entry
` [U-Boot] [PATCH v9 06/21] mtd: spi-nor: Kconfig: Add SPI_NOR_MACRONIX entry
` [U-Boot] [PATCH v9 07/21] mtd: spi-nor: Kconfig: Add SPI_NOR_SPANSION entry
` [U-Boot] [PATCH v9 08/21] mtd: spi-nor: Kconfig: Add SPI_NOR_STMICRO entry
` [U-Boot] [PATCH v9 09/21] mtd: spi-nor: Kconfig: Add SPI_NOR_SST entry
` [U-Boot] [PATCH v9 10/21] mtd: spi-nor: Kconfig: Add SPI_NOR_WINBOND entry
` [U-Boot] [PATCH v9 11/21] spi: Add spi_write_then_read
` [U-Boot] [PATCH v9 12/21] mtd: spi-nor: Add m25p80 driver
` [U-Boot] [PATCH v9 13/21] mtd: spi-nor: Kconfig: Add MTD_M25P80 entry
` [U-Boot] [PATCH v9 17/21] dm: mtd: Add uclass_driver.flags
` [U-Boot] [PATCH v9 18/21] dm: mtd: Add post_bind
` [U-Boot] [PATCH v9 19/21] cmd: Add mtd command support


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox