messages from 2017-01-18 06:37:41 to 2017-01-20 01:53:20 UTC [more...]
[U-Boot] [RFC PATCH 00/11] extend FIT loading support (plus Pine64/ATF support)
2017-01-20 1:53 UTC
[U-Boot] mmc: fsl_esdhc: eMMC boot: CMD_ERR (-ECOMM) in u-boot while accessing SD
2017-01-20 1:15 UTC (3+ messages)
[U-Boot] u-boot hangs when attaching an mtd to ubi using spinor flash, MX25L51245G
2017-01-20 1:15 UTC
[U-Boot] Porting u-boot to a new soc, unsure of standards to follow
2017-01-19 23:21 UTC (2+ messages)
[U-Boot] [PATCH 1/9] mmc: sdhci: Clear SDHCI_CLOCK_CONTROL before configuring the new value
2017-01-19 23:16 UTC (10+ messages)
` [U-Boot] [PATCH 2/9] mmc: sdhci: Add support for optional controller specific set_ios_post()
` [U-Boot] [PATCH 3/9] mmc: Add Marvell Xenon SDHCI controller driver
` [U-Boot] [PATCH 4/9] arm64: mvebu: Armada 3700: Add SDHCI device tree nodes
` [U-Boot] [PATCH 5/9] arm64: mvebu: Armada 3720-db: "
` [U-Boot] [PATCH 6/9] arm64: mvebu: Enable SDHCI/MMC support for the db-88f3720
` [U-Boot] [PATCH 7/9] arm64: mvebu: Armada 7k/8k: Add SDHCI device tree nodes
` [U-Boot] [PATCH 8/9] arm64: mvebu: Armada 7040-db: "
` [U-Boot] [PATCH 9/9] arm64: mvebu: Enable SDHCI/MMC support for the db-88f7040/8040
[U-Boot] [PATCH v3 0/9] imx6ul: Add Engicam Is.IoT MX6UL support
2017-01-19 23:02 UTC (10+ messages)
` [U-Boot] [PATCH v3 1/9] configs: imx6: Don't define USDHC2_BASE_ADDR
` [U-Boot] [PATCH v3 2/9] arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support
` [U-Boot] [PATCH v3 3/9] arm: dts: imx6ul-isiot: Add I2C nodes
` [U-Boot] [PATCH v3 4/9] imx6: isiotmx6ul: Add I2C support
` [U-Boot] [PATCH v3 5/9] arm: dts: imx6ul-isiot: Add FEC node
` [U-Boot] [PATCH v3 6/9] imx6: isiotmx6ul: Add FEC support
` [U-Boot] [PATCH v3 7/9] imx6: isiotmx6ul: Add NAND support
` [U-Boot] [PATCH v3 8/9] imx6: isiotmx6ul: Add nandboot env support
` [U-Boot] [PATCH v3 9/9] imx6ul: isiotmx6ul: Enable I2C support
[U-Boot] [PATCH] net: phy: dp83867: add support for MAC impedance configuration
2017-01-19 22:33 UTC
[U-Boot] [PATCH] arm: omap3: Update cpuinfo for DM3730, DM3725, AM3715, and AM3703
2017-01-19 20:04 UTC
[U-Boot] [PATCH 1/4] Move CONFIG_VIDEO_IPUV3 to defconfig
2017-01-19 19:58 UTC (7+ messages)
` [U-Boot] [PATCH 3/4] Move CONFIG_NAND_MXS "
[U-Boot] Rockchip RK3288 boot trouble
2017-01-19 18:29 UTC
[U-Boot] [PATCH v2] defconfig: Add a config for AM335x High Security EVM
2017-01-19 17:59 UTC (8+ messages)
[U-Boot] [v4, 1/3] mmc: fsl_esdhc: move 'status' property fixup into a weak function
2017-01-19 17:44 UTC (2+ messages)
[U-Boot] [PATCHv2 1/4] kconfig: armv8: move armv8 sec_firmware CONFIG_* to Kconfig
2017-01-19 17:44 UTC (8+ messages)
[U-Boot] [PATCH v3] armv8: aarch64: Fix the warning about x1-x3 nonzero issue
2017-01-19 17:42 UTC (2+ messages)
[U-Boot] [PATCHv8 1/2] armv8/ls1043a: fixup GIC offset for ls1043a rev1
2017-01-19 17:41 UTC (2+ messages)
[U-Boot] [PATCH] armv8: fsl-lsch3: enable snoopable sata read and write
2017-01-19 17:41 UTC (2+ messages)
[U-Boot] [PATCH 1/5] pmic: pmic_mc34vr500: Add a driver for the mc34vr500 pmic
2017-01-19 17:40 UTC (2+ messages)
[U-Boot] [PATCH] armv8: fsl-layerscape: Fix SECURE_BOOT config
2017-01-19 17:38 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v2 1/2] SECURE_BOOT: Update bootscript and its hdr addresses
2017-01-19 17:36 UTC (2+ messages)
[U-Boot] [PATCH 1/4] mmc: fsl_esdhc: make GPIO support optional
2017-01-19 17:35 UTC (2+ messages)
[U-Boot] [PATCHv5 1/2] armv8/fsl-lsch2: refactor the clock system initialization
2017-01-19 17:34 UTC (2+ messages)
[U-Boot] [PATCHv2 1/2] armv8: Enable CPUECTLR.SMPEN for coherency
2017-01-19 17:32 UTC (2+ messages)
[U-Boot] [PATCH] arm: layerscape: Enable UUID & GPT partition for NXP's ARM SoC
2017-01-19 17:31 UTC (2+ messages)
[U-Boot] [PATCH 1/2] armv8: ls1012: added usb nodes in dts
2017-01-19 17:30 UTC (2+ messages)
[U-Boot] [PATCHv2 1/2] ARMv8/fsl-layerscape: Correct the OCRAM size
2017-01-19 17:29 UTC (2+ messages)
[U-Boot] [PATCHv5 01/17] configs: ls1021a: enable DT and DM support
2017-01-19 17:27 UTC (2+ messages)
[U-Boot] [PATCH] armv8/layerscape: remove unnecessary function declares
2017-01-19 17:26 UTC (2+ messages)
[U-Boot] [PATCH] armv8: fsl-layerscape, ccn504: Set forced-order mode in RNI-6, RNI-20
2017-01-19 17:25 UTC (2+ messages)
[U-Boot] [PATCH] fsl/usb: enable usb feature for ls1046ardb
2017-01-19 17:24 UTC (2+ messages)
[U-Boot] Please pull u-boot-fsl-qoriq master
2017-01-19 17:20 UTC
[U-Boot] [PATCH 1/1] cmd/host: add missing \n in help text
2017-01-19 16:49 UTC
[U-Boot] [RFC Patch V3] drivers: mmc: omap_hsmmc: Fix IO Buffer on OMAP36xx
2017-01-19 15:17 UTC
[U-Boot] [PATCH] sunxi: Add defconfig for the Sinovoip BPI-M2+ board
2017-01-19 14:28 UTC (2+ messages)
[U-Boot] [PATCH 1/2] ARM: Default to using optimized memset and memcpy routines
2017-01-19 14:25 UTC (5+ messages)
` [U-Boot] [PATCH 2/2] board_init.c: Always use memset()
[U-Boot] [PATCH 00/12] sunxi: Allwinner H5 and OrangePi PC2 support
2017-01-19 13:57 UTC (4+ messages)
` [U-Boot] [PATCH 06/12] SPI: SPL: sunxi: fix 64-bit build
[U-Boot] [PATCH v2 00/18] arm: mvebu: Add gdsys ControlCenter-Compact board
2017-01-19 13:57 UTC (42+ messages)
` [U-Boot] [PATCH v2 01/18] pci: mvebu: Fix Armada 38x support
` [U-Boot] [PATCH v2 02/18] net: phy: Support Marvell 88E1680
` [U-Boot] [PATCH v2 03/18] mvebu: Add board_pex_config()
` [U-Boot] [PATCH v2 04/18] arm: mvebu: spl.c: Remove useless gd declaration
` [U-Boot] [PATCH v2 05/18] dm: Add callback to modify the device tree
` [U-Boot] [PATCH v2 06/18] lib: tpm: Add command to flush resources
` [U-Boot] [PATCH v2 07/18] core: device: Add dev_get_by_ofname function
` [U-Boot] [PATCH v2 08/18] gpio: Add gpio_request_simple function
` [U-Boot] [PATCH v2 09/18] tools: kwbimage: Fix dest addr
` [U-Boot] [PATCH v2 10/18] tools: kwbimage: Fix style violations
` [U-Boot] [PATCH v2 11/18] tools: kwbimage: Fix arithmetic with void pointers
` [U-Boot] [PATCH v2 12/18] tools: kwbimage: Reduce scope of variables
` [U-Boot] [PATCH v2 13/18] tools: kwbimage: Remove unused parameter
` [U-Boot] [PATCH v2 14/18] tools: kwbimage: Factor out add_binary_header_v1
` [U-Boot] [PATCH v2 15/18] tools: kwbimage: Refactor line parsing and fix error
` [U-Boot] [PATCH v2 16/18] arm: mvebu: Implement secure boot
` [U-Boot] [PATCH v2 17/18] arm: mvebu: Add gdsys ControlCenter-Compact board
` [U-Boot] [PATCH v2 18/18] controlcenterdc: Make secure boot available
[U-Boot] [PATCH] fpga: Use enum for bitstream command types
2017-01-19 13:57 UTC (2+ messages)
[U-Boot] [PATCH V3 0/7] dm: universal_c210: support the DM_PMIC
2017-01-19 13:57 UTC (13+ messages)
` [U-Boot] [PATCH V3 1/7] ARM: dts: exynos4: use the node's name for i2c
` [U-Boot] [PATCH V3 3/7] configs: s5pc210_universal: enable the DM_PMIC and MAX8998
` [U-Boot] [PATCH V3 4/7] board: samsung: universal_210: use the driver model for max8998
` [U-Boot] [PATCH V3 5/7] i2c: s3c24x0: fix the compiler error for exynos4
` [U-Boot] [PATCH V3 6/7] i2c: Kconfig: Add SYS_I2C_S3C24X0 entry
` [U-Boot] [PATCH V3 7/7] board: samsung: universal_c210: remove the codes relevant to soft_i2c
[U-Boot] [PATCH 1/2] spl: Move check for SPL_LIBCOMMON support to header
2017-01-19 13:57 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] spl: Remove inline ifdef check for EXT and FAT support
[U-Boot] [PATCH 1/2] spl: Move check for SPL_LIBCOMMON support to header
2017-01-19 13:57 UTC (2+ messages)
[U-Boot] [PATCH] armv8: release slave cores from CPU_RELEASE_ADDR
2017-01-19 12:33 UTC (7+ messages)
` [U-Boot] "
[U-Boot] [PATCH] arm64: spin-table: add more information in Kconfig help
2017-01-19 12:26 UTC (2+ messages)
[U-Boot] [PATCH][RFT] sunxi: power: axp809.c: Fix aldo1-2 being disabled for mvolt != 0
2017-01-19 11:46 UTC (2+ messages)
[U-Boot] [PATCH v2 00/10] zynq: clk: Move zynq platform to clock framework
2017-01-19 11:36 UTC (9+ messages)
` [U-Boot] [PATCH v2 01/10] net: zynq: Don't overwrite gem_rclk_ctrl with default value
` [U-Boot] [PATCH v2 02/10] net: zynq: Add clk framework support to zynq ethernet driver
` [U-Boot] [PATCH v2 09/10] mmc: zynq: Determine base clock frequency via clock framework
` [U-Boot] [PATCH v2 10/10] mmc: zynq: Add fdt max-frequency support
[U-Boot] [PATCH 14/20] mmc: Print error code for mmc_complete_init failure
2017-01-19 11:33 UTC (2+ messages)
[U-Boot] [RFC Patch V2] drivers: mmc: omap_hsmmc: Fix IO Buffer on OMAP36XX
2017-01-19 11:30 UTC (2+ messages)
[U-Boot] [PATCH 1/2] armv8: calculate __bss_size in u-boot-spl.lds
2017-01-19 11:28 UTC (3+ messages)
[U-Boot] [PATCH v4 0/1] mmc: sdhci: Add support for frequency constrained peripheral interfaces
2017-01-19 11:26 UTC (3+ messages)
` [U-Boot] [PATCH v4] mmc: sdhci: Distinguish between base clock and maximum peripheral frequency
[U-Boot] [PATCH] cmd: ubi: allow '-' to specify maximum volume size
2017-01-19 10:45 UTC
[U-Boot] rockchip: rk3288: Possible regression in sdram setup
2017-01-19 9:59 UTC (5+ messages)
[U-Boot] [PATCH] bootm: qnx: Disable data cache before booting QNX image
2017-01-19 9:23 UTC
[U-Boot] [PATCH 2/2] status_led: Kconfig migration
2017-01-19 8:51 UTC
[U-Boot] [PATCH 1/2] status_led: Kconfig migration - introduction
2017-01-19 8:51 UTC
[U-Boot] [PATCH 1/2] power: pmic: add the max8997 controller for DM
2017-01-19 6:13 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] arm: dts: trats: add the pmic node for using DM
[U-Boot] [PATCH 00/12] Add support for SD3.0 and eMMC HS200
2017-01-19 6:11 UTC (17+ messages)
` [U-Boot] [PATCH 01/12] mmc: sdhci: Update host capabilities about host controller
` [U-Boot] [PATCH 02/12] mmc: sdhci: Add support for SD3.0
` [U-Boot] [PATCH 03/12] mmc: sdhci: Add support for platform/board specific tuning
` [U-Boot] [PATCH 04/12] mmc: sdhci: Add support for platform specific delay
` [U-Boot] [PATCH 05/12] mmc: sdhci: Make sdhci_ops of host as modifiable
` [U-Boot] [PATCH 06/12] zynqmp: Define routines for mmio write and read
` [U-Boot] [PATCH 07/12] mmc: sdhci: zynq: Define private structure arasan_sdhci_priv
` [U-Boot] [PATCH 08/12] mmc: sdhci: zynqmp: Add support of SD3.0
` [U-Boot] [PATCH 09/12] mmc: sdhci: Add quirk for 1.8v switching not supported
` [U-Boot] [PATCH 10/12] mmc: zynq_sdhci: Update quirk if "
` [U-Boot] [PATCH 11/12] mmc: sdhci: Add support for eMMC HS200 mode
` [U-Boot] [PATCH 12/12] mmc: sdhci: zynqmp: Set tapdelays "
[U-Boot] [PATCH] armv8: ls1046aqds: added usb feature support
2017-01-19 6:02 UTC (3+ messages)
[U-Boot] [PATCH 0/3] armv8: fsl-layerscape: Update vid support
2017-01-19 5:42 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] armv8: fsl-layerscape: Updates DCFG register map
` [U-Boot] [PATCH 2/3] armv8: fsl-lsch3: Update VID support
` [U-Boot] [PATCH 3/3] armv8: fsl-layerscape: Add vid support for LS2080AQDS
[U-Boot] [GIT PULL] Xilinx changes
2017-01-19 3:20 UTC (6+ messages)
[U-Boot] [PATCH v2] serial, ns16550: bugfix: ns16550 fifo not enabled
2017-01-19 3:11 UTC (3+ messages)
[U-Boot] [PATCH] spl: don't use %.*s with CONFIG_USE_TINY_PRINTF
2017-01-19 3:03 UTC (4+ messages)
[U-Boot] [PATCH] spl: don't use %#l with CONFIG_USE_TINY_PRINTF
2017-01-19 3:00 UTC (3+ messages)
[U-Boot] [RESEND] video: bcm2835: add support for reading from the video-mode environment variable
2017-01-19 2:15 UTC (7+ messages)
[U-Boot] [RESEND PATCH] bootm: relocate ramdisk if CONFIG_SYS_BOOT_RAMDISK_HIGH set
2017-01-19 1:12 UTC
[U-Boot] How to test watchdog timer values and ensuring it is working as intended
2017-01-18 23:46 UTC
[U-Boot] Please pull from u-boot-i2c
2017-01-18 23:14 UTC (2+ messages)
[U-Boot] please pull u-boot-samsung master
2017-01-18 23:14 UTC (2+ messages)
[U-Boot] [PATCH v3 0/4] arm: aspeed: Basic support for Aspeed AST2500 part and eval board
2017-01-18 21:44 UTC (6+ messages)
` [U-Boot] [PATCH v4 "
` [U-Boot] [PATCH v4 1/4] aspeed: Add drivers common to all Aspeed SoCs
` [U-Boot] [PATCH v4 2/4] aspeed: Add basic ast2500-specific drivers and configuration
` [U-Boot] [PATCH v4 3/4] aspeed: Board init functions and common configs for ast2500 based boards
` [U-Boot] [PATCH v4 4/4] aspeed: Support for ast2500 Eval Board
[U-Boot] U-Boot IPv6 state
2017-01-18 21:44 UTC (4+ messages)
[U-Boot] [PATCH] i2c: mux: Allow muxes to work as children of i2c bus without i2c-parent
2017-01-18 21:42 UTC (7+ messages)
[U-Boot] [PATCH 00/12] arm: aspeed: Basic support for Aspeed AST2500 part and eval board
2017-01-18 20:16 UTC (4+ messages)
` [U-Boot] [PATCH 08/12] aspeed/ast2500: Add SDRAM MC driver
[U-Boot] [PATCH v3] odroid-c2: Enable distro boot
2017-01-18 20:04 UTC (2+ messages)
` [U-Boot] [U-Boot,v3] "
[U-Boot] [PATCH v3 0/9] ARM: stm32: add network and qspi driver support to stm32f746-disco board
2017-01-18 19:45 UTC (7+ messages)
` [U-Boot] [PATCH v3 1/9] ARM: DTS: stm32: add stm32f746 device tree pin control files
[U-Boot] [RFC PATCH 0/9] ARM: imx: mx6: Add virtual mx6memcal board
2017-01-18 19:01 UTC (6+ messages)
` [U-Boot] [RFC PATCH 0/3] ARM: imx: mx6: Add plugin support for SPL
[U-Boot] Start watchdog from uboot
2017-01-18 16:56 UTC
[U-Boot] [PATCH] simple-bus: enable suport for of-platdata
2017-01-18 12:25 UTC
[U-Boot] [RFC PATCH 0/3] arm64: rk3399: enable SPL with ATF support
2017-01-18 12:20 UTC (6+ messages)
` [U-Boot] [RFC PATCH 2/3] arm64: rk3399: add ddr controller driver
` [U-Boot] [RFC PATCH 3/3] spl: add support to booting with ATF
[U-Boot] [PATCH 0/6] rk3399: enable SPL driver
2017-01-18 12:16 UTC (7+ messages)
` [U-Boot] [PATCH 1/6] arm64: rk3399: add ddr controller driver
` [U-Boot] [PATCH 2/6] arm64: rk3399: move grf register definitions to grf_rk3399.h
` [U-Boot] [PATCH 3/6] clk: rk3399: update driver for spl
` [U-Boot] [PATCH 4/6] sdhci: rk3399: update driver to support of-platdata
` [U-Boot] [PATCH 5/6] pinctrl: rk3399: add the of-platdata support
` [U-Boot] [PATCH 6/6] arm64: rk3399: add SPL support
[U-Boot] [PATCH 00/14] x86: qemu: Add 64-bit U-Boot support
2017-01-18 11:33 UTC (15+ messages)
` [U-Boot] [PATCH 01/14] x86: qemu: Add missing DECLARE_GLOBAL_DATA_PTR in e820.c
` [U-Boot] [PATCH 02/14] x86: Wrap print_ch() with config option
` [U-Boot] [PATCH 03/14] x86: spl: Add weak arch_cpu_init_dm()
` [U-Boot] [PATCH 04/14] x86: Compile irq.c for 64-bit
` [U-Boot] [PATCH 05/14] x86: qemu: Hide arch_cpu_init() and print_cpuinfo() for U-Boot proper
` [U-Boot] [PATCH 06/14] x86: qemu: Fix compiler warnings for 64-bit
` [U-Boot] [PATCH 07/14] x86: qemu: Set up device tree for SPL
` [U-Boot] [PATCH 08/14] x86: qemu: Mark ucode as optional for SPL in u-boot.dtsi
` [U-Boot] [PATCH 09/14] tools: binman: Call correct init for Entry_u_boot_spl_with_ucode_ptr
` [U-Boot] [PATCH 10/14] tools: binman: Handle optional microcode case in SPL image
` [U-Boot] [PATCH 11/14] spl: Add a LF to the loading message
` [U-Boot] [PATCH 12/14] x86: qemu: Add a text base for 64-bit U-Boot
` [U-Boot] [PATCH 13/14] x86: qemu: Add build options for SPL
` [U-Boot] [PATCH 14/14] x86: qemu: Add a config for 64-bit U-Boot
[U-Boot] [PATCH v2 0/4] Add FreeBSD kconfig options
2017-01-18 10:42 UTC (6+ messages)
` [U-Boot] [PATCH v2 3/4] api: FreeBSD: flush cache before starting loader/kernel
[U-Boot] [PATCH v3 00/62] x86: Add initial support for 64-bit U-Boot
2017-01-18 9:04 UTC (3+ messages)
` [U-Boot] [PATCH v3 62/62] x86: link: Add a config "
[U-Boot] [PATCH 0/3] Fixes for topic-miami and topic-miamiplus board
2017-01-18 8:35 UTC (3+ messages)
` [U-Boot] [PATCH v2 "
[U-Boot] of-platdata address map decode for 64-bits
2017-01-18 6:37 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox