messages from 2017-03-01 20:10:41 to 2017-03-05 12:51:54 UTC [more...]
[U-Boot] BeagleBoard B7 (OMAP3530) fails to boot with the current U-Boot master branch
2017-03-05 12:51 UTC
[U-Boot] [PATCH v4 0/8] arm: socfpga: Move to using distro boot
2017-03-05 10:42 UTC (3+ messages)
` [U-Boot] [PATCH v4 1/8] arm: socfpga: Add distro boot to socfpga common header
[U-Boot] [linux-sunxi] Re: [PATCH 14/17] sunxi: Pine64: defconfig: enable SPL FIT support
2017-03-05 10:40 UTC (5+ messages)
[U-Boot] [PATCH v1] env_mmc: configure environment offsets via device tree
2017-03-05 8:39 UTC (9+ messages)
[U-Boot] [PATCH] drivers/usb/ehci: Use platform-specific accessors
2017-03-05 1:09 UTC (6+ messages)
[U-Boot] [PATCH 0/4] Add Intel Arria 10 SoC FPGA driver
2017-03-05 0:57 UTC (7+ messages)
` [U-Boot] [PATCH 1/4] arm: socfpga: Removing unused passing parameter of socfpga_bridges_reset
` [U-Boot] [PATCH 2/4] arm: socfpga: Restructure FPGA driver in the preparation to support A10
` [U-Boot] [PATCH 3/4] arm: socfpga: Add Arria10 FPGA manager program assembly driver
` [U-Boot] [PATCH 4/4] arm: socfpga: Add FPGA driver support for Arria 10
[U-Boot] [PATCH v2 2/8] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"
2017-03-05 0:55 UTC (4+ messages)
[U-Boot] [PATCH] usb gadget: increase envstr size in cb_getvar
2017-03-05 0:54 UTC (4+ messages)
[U-Boot] [PATCH] fastboot: avoid printing invalid data
2017-03-05 0:51 UTC (3+ messages)
[U-Boot] [PATCH] mx6cuboxi: Add support for sata
2017-03-04 19:05 UTC (4+ messages)
[U-Boot] [PATCH] ARM: keystone: Pass SPI MTD partition table via kernel command line
2017-03-04 17:09 UTC (2+ messages)
[U-Boot] [PATCH] spi: mxc_spi: support driver model
2017-03-04 2:47 UTC
[U-Boot] [PATCH 1/3] imx: mx6slevk: use SPI_BOOT
2017-03-04 2:45 UTC (3+ messages)
` [U-Boot] [PATCH 2/3] imx: mx6slevk: introduce device tree support
` [U-Boot] [PATCH 3/3] imx: mx6slevk: enable more DM drivers
[U-Boot] [ PATCH 1/2] net: fix cache misaligned issue in Broadcom SF2 driver
2017-03-04 1:39 UTC (3+ messages)
` [U-Boot] [ PATCH 2/2] net: move Broadcom SF2 driver to Kconfig
[U-Boot] sdhci_transfer_data: Error detected in status(0x208002) problem on Tiny4412 board
2017-03-03 22:29 UTC
[U-Boot] [PATCH 1/5] kconfiglib.py: Kludge in 'imply' support
2017-03-03 20:33 UTC (5+ messages)
` [U-Boot] [PATCH 2/5] am335x_evm: Switch to using imply keyword
` [U-Boot] [PATCH 3/5] TI: Migrate board/ti/common/Kconfig to imply
` [U-Boot] [PATCH 4/5] omap3: Migrate to using imply
` [U-Boot] [PATCH 5/5] omap4: "
[U-Boot] [PATCH] sunxi: Add maintainer of the NanoPi NEO Air
2017-03-03 20:25 UTC
[U-Boot] [PATCH 00/17] SPL: extend FIT loading support
2017-03-03 19:03 UTC (14+ messages)
` [U-Boot] [PATCH 02/17] SPL: FIT: refactor FDT loading
` [U-Boot] [PATCH 03/17] SPL: FIT: rework U-Boot image loading
` [U-Boot] [PATCH 04/17] SPL: FIT: factor out spl_load_fit_image()
` [U-Boot] [PATCH 11/17] sunxi: SPL: add FIT config selector for Pine64 boards
` [U-Boot] [linux-sunxi] "
` [U-Boot] [PATCH 12/17] Makefile: add rules to generate SPL FIT images
[U-Boot] arm: cache: misaligned operation with fastboot
2017-03-03 17:27 UTC (6+ messages)
[U-Boot] [PATCH 1/5] mtd: nand: add initialization flag
2017-03-03 16:50 UTC (6+ messages)
` [U-Boot] [PATCH 2/5] mtd: nand: remove nand size print from nand_init function
` [U-Boot] [PATCH 3/5] fsl PPA: add support PPA image loading from NAND and SD
` [U-Boot] [PATCH 4/5] Kconfig: fsl-ppa: support load PPA from eMMC/SD and NAND Flash
` [U-Boot] [PATCH 5/5] fsl-layerscape/ls104xardb: enable PPA support for eMMC/SD and NAND boot
[U-Boot] [PATCH v3 00/11] Rewrite ARMv8 layerscape MMU
2017-03-03 16:38 UTC (4+ messages)
` [U-Boot] [PATCH v3 01/11] armv8: Add global variable resv_ram
[U-Boot] [PATCH 1/2] cmd: ubifs: Add a dependency on CMD_UBI
2017-03-03 15:50 UTC (3+ messages)
` [U-Boot] [PATCH 2/2] cmd: nand: Make the NAND options default to NAND_SUNXI
[U-Boot] [PATCH v4] armv8: spl: Call spl_relocate_stack_gd for ARMv8
2017-03-03 15:36 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH] armv5te: make 'ret lr' produce iinterworking 'bx lr'
2017-03-03 15:35 UTC (6+ messages)
` [U-Boot] "
[U-Boot] [PATCH v2] net: macb: Fix ETH not found when clock not support
2017-03-03 15:35 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH v1] gpt: Fix uuid string format
2017-03-03 15:18 UTC (3+ messages)
[U-Boot] [PATCH v5 0/16] sunxi: Add support for the CHIP Pro
2017-03-03 15:00 UTC (7+ messages)
` [U-Boot] [PATCH v5 11/16] sunxi: Enable UBI and NAND support
` [U-Boot] [PATCH v5 16/16] sunxi: Add support for the CHIP Pro
[U-Boot] [PATCH] cmd: wdt: Add "wdt disable" command
2017-03-03 12:19 UTC (4+ messages)
[U-Boot] [PATCH v2 0/6] sunxi: DM pinctrl implementation
2017-03-03 10:52 UTC (4+ messages)
` [U-Boot] [PATCH v2 2/6] dm: core: Allow multiple drivers to bind for a single node
[U-Boot] [PATCH v3] serial: Add serial driver for Intel MID
2017-03-03 10:31 UTC (3+ messages)
[U-Boot] [linux-sunxi] Re: [PATCH 14/17] sunxi: Pine64: defconfig: enable SPL FIT support
2017-03-03 10:24 UTC
[U-Boot] [PATCH] do_smhload: fix return code
2017-03-03 8:50 UTC (2+ messages)
[U-Boot] [PATCH v2 0/2] mtd: nand: atmel: use another functions to set gpio value
2017-03-03 7:03 UTC (3+ messages)
` [U-Boot] [PATCH v2 1/2] ARM: at91: gpio: fix at91_set_gpio_value() define
` [U-Boot] [PATCH v2 2/2] mtd: nand: atmel: use another functions to set gpio value
[U-Boot] Question about bootp structure pack
2017-03-03 6:45 UTC (4+ messages)
` [U-Boot] [U-boot] "
[U-Boot] [RFC PATCH 1/3] dm: core: Add pre-OS remove flag to device_remove()
2017-03-03 6:35 UTC (9+ messages)
` [U-Boot] [RFC PATCH 2/3] dm: core: Add dm_pre_os_remove() and hook it into device_remove()
` [U-Boot] [RFC PATCH 3/3] arm: bootm: Add dm_pre_os_remove() call to announce_and_cleanup()
[U-Boot] [PATCH v2 0/2] clk: at91: enhance the peripheral clock
2017-03-03 6:19 UTC (3+ messages)
` [U-Boot] [PATCH v2 1/2] "
` [U-Boot] [PATCH v2 2/2] clk: at91: align clk-master's compatibles with kernel's
[U-Boot] [PATCH 0/2] mtd: nand: atmel: use another functions to set/get gpio value
2017-03-03 5:02 UTC (6+ messages)
` [U-Boot] [PATCH 1/2] ARM: at91: gpio: fix at91_set/get_gpio_value()
` [U-Boot] [PATCH 2/2] mtd: nand: atmel: change another functions to set/get gpio value
[U-Boot] [PATCH v1] tools: Remove CONFIG_SYS_TEXT_BASE in Makefile
2017-03-03 4:53 UTC (2+ messages)
[U-Boot] [PATCHv2 1/3] Freescale/NXP: Migrate CONFIG_FSL_CAAM to defconfigs
2017-03-03 4:53 UTC (6+ messages)
` [U-Boot] [PATCHv2 2/3] FIT: Rename FIT_DISABLE_SHA256 to FIT_ENABLE_SHA256_SUPPORT
` [U-Boot] [PATCHv2 3/3] lib: move hash CONFIG options to Kconfig
[U-Boot] [RESEND PATCH 0/9] Add support for secure boot on Keystone2 SoCs
2017-03-03 4:53 UTC (6+ messages)
` [U-Boot] [RESEND PATCH 8/9] defconfig: k2e_hs_evm: Add k2e_hs_evm_defconfig
[U-Boot] Device cleanup before starting OS (Linux)
2017-03-03 4:53 UTC (4+ messages)
[U-Boot] [RFC PATCH] kbuild: turn of dtc unit address warnings by default
2017-03-03 4:52 UTC (2+ messages)
[U-Boot] [PATCH 0/9] Add support for secure boot on Keystone2 SoCs
2017-03-03 4:52 UTC (3+ messages)
` [U-Boot] [PATCH 1/9] image: Fixes build warning with CONFIG_FIT_IMAGE_POST_PROCESS
[U-Boot] [PATCH 1/2] ARM: dts: rockchip: enable gmac for rk3288 boards
2017-03-03 4:52 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] rockchip: configs: Enable networking support on "
[U-Boot] [PATCH 1/3] dm: Return actual bools in dm_fdt_pre_reloc
2017-03-03 4:52 UTC (6+ messages)
` [U-Boot] [PATCH 2/3] rockchip: rk3188: enable TPL_LIBGENERIC for generic memset
` [U-Boot] [PATCH 3/3] rockchip: rk3188: drop CONFIG_SYS_NO_FLASH
[U-Boot] [PATCH] binman: Explicitly request python2 instead of python from env
2017-03-03 4:52 UTC (5+ messages)
[U-Boot] [PATCH 0/3 v3] arm: mvebu: Add gdsys ControlCenter-Compact board
2017-03-03 4:52 UTC (5+ messages)
` [U-Boot] [PATCH 1/3 v3] dm: Add callback to modify the device tree
` [U-Boot] [PATCH 2/3 v3] arm: mvebu: Add gdsys ControlCenter-Compact board
[U-Boot] [PATCH 0/3] board: at91sam9g20ek/at91sam9260ek: convert to support DM and DT
2017-03-03 4:52 UTC (5+ messages)
` [U-Boot] [PATCH 2/3] board: at91sam9g20ek/at91sam9260ek: move config options to defconfig
` [U-Boot] [PATCH 3/3] board: at91sam9260ek: clean up code
[U-Boot] [PATCH 0/2] clk: at91: enhance the peripheral clock
2017-03-03 4:52 UTC (5+ messages)
` [U-Boot] [PATCH 1/2] "
` [U-Boot] [PATCH 2/2] clk: at91: align clk-master's compatibles with kernel's
[U-Boot] x86: SecureBoot: Bay Trail
2017-03-03 4:52 UTC (6+ messages)
[U-Boot] [PATCHv3 1/2] pci: layerscape: add LS2088A series SoC pcie support
2017-03-03 4:35 UTC (2+ messages)
` [U-Boot] [PATCHv3 2/2] pci: layerscape: Add support ls2088a kernel DT node fixup
[U-Boot] [PATCH v6 1/3] arm: dts: update Meson GXBB / Odroid-C2 DT with latest Linux version
2017-03-03 2:18 UTC (2+ messages)
[U-Boot] [PATCH] drivers: net: phy: atheros: apply the previous register setting for AR8031 to fix the voltage peak issue
2017-03-03 1:58 UTC (11+ messages)
[U-Boot] STM32F429 u-boot
2017-03-02 22:19 UTC
[U-Boot] TODO list for u-boot
2017-03-02 19:58 UTC (4+ messages)
[U-Boot] [PATCH 00/31] ARM: k2g: Add support for new K2G ICE EVM
2017-03-02 19:52 UTC (34+ messages)
` [U-Boot] [PATCH 01/31] ti: common: board_detect: Allow settings board detection variables manually
` [U-Boot] [PATCH 02/31] spl: fit: Break out some functions into a common file
` [U-Boot] [PATCH 03/31] boot_fit: Create helper functions that can be used to select DTB out of FIT
` [U-Boot] [PATCH 04/31] fdt: Enable selecting correct DTB from append FIT Image
` [U-Boot] [PATCH 05/31] ti: common: board_detect: Add function to determine if EEPROM was read
` [U-Boot] [PATCH 06/31] dts: Allow OF_LIST to depend on FIT_EMBED
` [U-Boot] [PATCH 07/31] arm: dts: Add new "generic" 66AK2Gx device tree file
` [U-Boot] [PATCH 08/31] ti: common: board_detect: Rename EEPROM scratch start macro
` [U-Boot] [PATCH 09/31] ti_armv7_keystone2: Define scratch space in SRAM
` [U-Boot] [PATCH 10/31] ARM: Use Kconfig for board EEPROM's I2C bus and chip address
` [U-Boot] [PATCH 11/31] ARM: k2g: Enable TI board detection code
` [U-Boot] [PATCH 12/31] board_f: Add new function to allow runtime DTB selection
` [U-Boot] [PATCH 13/31] Makefile: Build additional binaries for dtb FIT blobs appended to U-boot
` [U-Boot] [PATCH 14/31] ARM: keystone2: Allow to build with all image formats
` [U-Boot] [PATCH 15/31] ARM: k2g: Define embedded_dtb_select for runtime DTB selection in U-boot
` [U-Boot] [PATCH 16/31] ARM: keystone2: Define board_fit_config_name_match for Keystone 2 boards
` [U-Boot] [PATCH 17/31] ks2_evm: Add EEPROM based board detection
` [U-Boot] [PATCH 18/31] defconfig: keystone2: Enable U-boot runtime DTB detection
` [U-Boot] [PATCH 19/31] ARM: keystone2: Add additional fields used for DDR3 configuration
` [U-Boot] [PATCH 20/31] ARM: k2g: Program DDR PHY MR2 register with the default value
` [U-Boot] [PATCH 21/31] ARM: k2g: Program DDRPHY_DATX8 registers via mask and value variables
` [U-Boot] [PATCH 22/31] ks2_evm: Add EEPROM based board detection helper functions
` [U-Boot] [PATCH 23/31] ARM: k2g: Add pinmux support for K2G ICE evm
` [U-Boot] [PATCH 24/31] ARM: k2g: Add DDR3 configuration "
` [U-Boot] [PATCH 25/31] board: ks2: Use board detection to wrap code not specific to "
` [U-Boot] [PATCH 26/31] ARM: k2g: Use board detection to wrap K2G GP specific calls
` [U-Boot] [PATCH 27/31] ARM: k2g: Update board_name u-boot env variable at runtime
` [U-Boot] [PATCH 28/31] ARM: dts: k2g: Disable netcp by default
` [U-Boot] [PATCH 29/31] ARM: dts: k2g: Add DT support for K2G Industrial Communication Engine evm
` [U-Boot] [PATCH 30/31] ARM: k2g: Add K2G ICE DTB to the list of possible DTBs
` [U-Boot] [PATCH 31/31] defconfig: k2g_evm_defconfig: Add K2G ICE to OF_LIST
[U-Boot] [PATCH] arm: Update our 'ret' assembler macro slightly
2017-03-02 14:59 UTC
[U-Boot] [PATCH][v2] armv8:ls2080a: Reorganise NAND_BOOT code in config flag
2017-03-02 13:46 UTC (4+ messages)
` [U-Boot] [PATCH][v2] armv8: ls2080aqds: Add support for SD boot
[U-Boot] Someone expert in lvds timings ?
2017-03-02 11:59 UTC
[U-Boot] [PATCH 1/2][v3] armv8: ls2080a: Reorganise NAND_BOOT code in config flag
2017-03-02 11:43 UTC (2+ messages)
` [U-Boot] [PATCH 2/2][v3] armv8: ls2080aqds: Add support for SD boot
[U-Boot] [PATCH] powerpc: e6500: Lock/unlock 1 cache instead of L1 as init_ram
2017-03-02 8:42 UTC
[U-Boot] [PATCH] powerpc: e6500: Lock/unlock 1 cache instead of L1 as init_ram
2017-03-02 8:42 UTC
[U-Boot] i.MX6QP sd boot issue
2017-03-02 0:51 UTC (4+ messages)
[U-Boot] [PATCH v2 6/8] dts: socfpga: Add trigger-address property to QSPI device
2017-03-01 23:32 UTC (4+ messages)
[U-Boot] [PATCH v1] i2c: sunxi: add device-model support for i2c
2017-03-01 21:34 UTC
[U-Boot] [PATCH 0/2] sunxi: power: Add AXP806 and AXP808 support
2017-03-01 21:29 UTC (4+ messages)
` [U-Boot] [PATCH 1/2 RFT] "
[U-Boot] [PATCH v2 0/2] sunxi: DM-based driver for SPI
2017-03-01 21:29 UTC (3+ messages)
` [U-Boot] [PATCH v2 1/2] spi: sunxi_spi: Add DM SPI driver for A31/A80/A64
` [U-Boot] [PATCH v2 2/2] sunxi_spi: add support for dual-IO flashes
[U-Boot] [PATCH v3 0/9] sunxi: DM-based CLK, RESET and PINCTRL
2017-03-01 21:20 UTC (10+ messages)
` [U-Boot] [PATCH v3 1/9] sunxi: add pinctrl (UCLASS_PINCTRL) support for sunxi
` [U-Boot] [PATCH v3 2/9] dm: core: Allow multiple drivers to bind for a single node
` [U-Boot] [PATCH v3 3/9] sunxi: CONFIG_DM_ALLOW_MULTIPLE_DRIVERS for gpio/pinctrl binding
` [U-Boot] [PATCH v3 4/9] Kconfig: sunxi: Select new option for allow multiple drivers to bind
` [U-Boot] [PATCH v3 5/9] sunxi: add module reset (UCLASS_RESET) support for sunxi
` [U-Boot] [PATCH v3 6/9] linux/kernel.h: sync DIV_ROUND_UP_ULL from kernel
` [U-Boot] [PATCH v3 7/9] clk: clk-uclass: add clk_get_by_output_name
` [U-Boot] [PATCH v3 8/9] sunxi: add clock driver (UCLASS_CLK) support for sunxi
` [U-Boot] [PATCH v3 9/9] cmd: move CONFIG_CMD_CLK to Kconfig
[U-Boot] [PATCH v3 0/3] disk: efi: allow gap before partition entries
2017-03-01 20:10 UTC (2+ messages)
` [U-Boot] [PATCH v3 3/3] part_efi: document device-tree binding for part_efi configuration
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox