messages from 2017-03-17 18:33:34 to 2017-03-21 01:18:15 UTC [more...]
[U-Boot] [PATCH 00/17] Expand Aspeed AST2500 Support
2017-03-21 1:18 UTC (12+ messages)
` [U-Boot] [PATCH 11/17] aspeed: Add I2C Driver
` [U-Boot] [PATCH 13/17] aspeed: Add support for Clocks needed by MACs
[U-Boot] [PATCH] spl: Kconfig: SPL_MMC_SUPPORT depends on GENERIC_MMC
2017-03-21 0:04 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v2 0/7] sunxi: video: Add support for HDMI output on A64/H3/H5
2017-03-21 0:02 UTC (9+ messages)
` [U-Boot] [PATCH v2 1/7] rockchip: video: Split out HDMI controller code
` [U-Boot] [PATCH v2 2/7] sunxi: video: Split out TCON code
` [U-Boot] [PATCH v2 3/7] sunxi: video: Convert lcdc to use struct display_timing
` [U-Boot] [PATCH v2 4/7] sunxi: Add clock support for DE2/HDMI/TCON on newer SoCs
` [U-Boot] [PATCH v2 5/7] sunxi: video: Add A64/H3/H5 HDMI driver
` [U-Boot] [PATCH v2 6/7] sunxi: Disable DE2 video driver where not needed
` [U-Boot] [PATCH v2 7/7] [DO NOT MERGE] sunxi: add AXP803 support
` [U-Boot] [linux-sunxi] [PATCH v2 0/7] sunxi: video: Add support for HDMI output on A64/H3/H5
[U-Boot] [PATCH 00/18] stm32f7: add sdram & gpio drivers
2017-03-20 20:48 UTC (19+ messages)
` [U-Boot] [PATCH 01/18] stm32f7: use clock driver to enable qspi controller clock
` [U-Boot] [PATCH 02/18] stm32f7: sdram: move sdram driver code to ram drivers area
` [U-Boot] [PATCH 03/18] stm32f7: dm: add driver model support for sdram
` [U-Boot] [PATCH 04/18] ARM: DT: stm32f7: add sdram pin contol node
` [U-Boot] [PATCH 05/18] stm32f7: use driver model for sdram initialization
` [U-Boot] [PATCH 06/18] stm32f7: use clock driver to enable sdram controller clock
` [U-Boot] [PATCH 07/18] stm32f7: sdram: use sdram device tree node to configure sdram controller
` [U-Boot] [PATCH 08/18] dm: gpio: Add driver for stm32f7 gpio controller
` [U-Boot] [PATCH 09/18] ARM: DT: stm32f7: add gpio device tree nodes
` [U-Boot] [PATCH 10/18] stm32f7: use stm32f7 gpio driver supporting driver model
` [U-Boot] [PATCH 11/18] stm32f746: to switch on user LED1 & read user button
` [U-Boot] [PATCH 12/18] stm32f7: stm32f746-disco: read memory info from device tree
` [U-Boot] [PATCH 13/18] stm32f7: enable board info read "
` [U-Boot] [PATCH 14/18] stm32f7: sdram: correct sdram configuration as per micron sdram
` [U-Boot] [PATCH 15/18] stm32f7: increase the max no of pin configuration to 70
` [U-Boot] [PATCH 16/18] stm32f7: move board specific pin muxing to dts
` [U-Boot] [PATCH 17/18] stm32f7: add support for stm32f769 disco board
` [U-Boot] [PATCH 18/18] stm32f7: remove not needed configuration from board config
[U-Boot] [PATCH] sunxi: Add defconfig for Allwinner A23 EVB
2017-03-20 18:58 UTC (7+ messages)
[U-Boot] [PATCH 1/2] cmd: ubifs: Add a dependency on CMD_UBI
2017-03-20 18:55 UTC (5+ messages)
` [U-Boot] [PATCH 2/2] cmd: nand: Make the NAND options default to NAND_SUNXI
[U-Boot] [PATCH] travis-ci: Re-work i.MX6 jobs, clarify Freescale and AArch64
2017-03-20 18:19 UTC
[U-Boot] [PATCH] spl: Correct call to spl_common_init() with SPL_STACK_R_MALLOC_SIMPLE_LEN
2017-03-20 18:19 UTC
[U-Boot] [PATCH 1/3] imx: mx6slevk: use SPI_BOOT
2017-03-20 18:03 UTC (3+ messages)
[U-Boot] [U-Boot 0/3] introduce Rockchip rockusb
2017-03-20 16:33 UTC (16+ messages)
` [U-Boot] [U-Boot 1/3] drivers: usb: gadget: add the rockusb gadget
` [U-Boot] [U-Boot 2/3] cmd: add rockusb command
` [U-Boot] [U-Boot 3/3] rockchip: rk3288: enable rockusb support on rk3288 based device
[U-Boot] [PATCH] spi: mxc_spi: support driver model
2017-03-20 16:17 UTC (3+ messages)
[U-Boot] sf: Remove spansion_s25fss_disable_4KB_erase
2017-03-20 16:12 UTC (2+ messages)
[U-Boot] [PATCH] mmc: xenon_sdhci: Add missing host->max_clk to Xenon SDHCI driver
2017-03-20 16:00 UTC
[U-Boot] [PATCH v2] fdt_support: Fixup 'ethernet' aliases not ending in digits
2017-03-20 14:29 UTC (2+ messages)
[U-Boot] [PATCH v4 1/2] spl: Add spl_early_init()
2017-03-20 14:27 UTC (3+ messages)
[U-Boot] board: STiH410-B2260: enable caches
2017-03-20 14:21 UTC
[U-Boot] [PATCH 00/21] STiH410-B2260: add reset, usb and fastboot support
2017-03-20 13:45 UTC (16+ messages)
` [U-Boot] [PATCH 05/21] phy: Add STi phy usb support
` [U-Boot] [PATCH 06/21] usb: ehci: Add STi ehci support
` [U-Boot] [PATCH 08/21] usb: ohci: Add STi ohci support
` [U-Boot] [PATCH 13/21] usb: dwc3: Add dwc3 support for STi
` [U-Boot] [PATCH 21/21] STiH410-B2260: enable CMD_PART
[U-Boot] [PATCH v2 1/2] x86: Add SCU IPC driver for Intel MID platforms
2017-03-20 13:27 UTC (3+ messages)
[U-Boot] [PATCH v1] mmc: sdhci: SDHCI controllers also need power
2017-03-20 12:51 UTC (3+ messages)
[U-Boot] [PATCH 1/4 v2] dm: core: Add flags parameter to device_remove()
2017-03-20 11:51 UTC (4+ messages)
` [U-Boot] [PATCH 2/4 v2] dm: core: Add dm_remove_devices_flags() and hook it into device_remove()
` [U-Boot] [PATCH 3/4 v2] arm: bootm: Add dm_remove_devices_flags() call to announce_and_cleanup()
` [U-Boot] [PATCH 4/4 v2] dm: test: Add test for device removal
[U-Boot] [PATCH 0/8] rockchip: rk3188: fixups and armclk speedup
2017-03-20 11:40 UTC (9+ messages)
` [U-Boot] [PATCH 1/8] rockchip: rk3188: sdram: Set correct sdram base
` [U-Boot] [PATCH 2/8] rockchip: rk3188: Decode the actual amount of ram
` [U-Boot] [PATCH 3/8] rockchip: rk3188: Cleanup some SPL/TPL rename leftovers
` [U-Boot] [PATCH 4/8] rockchip: clk: rk3188: Allow configuration of the armclk
` [U-Boot] [PATCH 5/8] rockchip: rk3188: Setup the armclk in spl
` [U-Boot] [PATCH 6/8] rockchip: rk3188: Switch to new i2c IP blocks
` [U-Boot] [PATCH 7/8] rockchip: i2c: Add compatibles for Rockchip Cortex-A9 socs
` [U-Boot] [PATCH 8/8] rockchip: Enable pmic options and act8846 driver on rk3188 rock boards
[U-Boot] [PATCH] ti: boot: Register the MMC controllers in SPL in the same way as in u-boot
2017-03-20 11:17 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] rockchip: spl: use spl_early_init() instead of spl_init()
2017-03-20 10:30 UTC (2+ messages)
[U-Boot] [PATCH v2 0/4] driver: ti_qspi: Use a SYSCON device to map the ctrl_mod_mmap register
2017-03-20 10:08 UTC (9+ messages)
` [U-Boot] [PATCH v2 2/4] regmap: use fdt address translation
` [U-Boot] [PATCH v2 3/4] drivers: ti_qspi: use syscon to get the address ctrl_mod_mmap register
[U-Boot] [PATCH 0/3] tpm: Add and fix commands
2017-03-20 9:28 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] tpm: Add function to load keys via their parent's SHA1 hash
` [U-Boot] [PATCH 2/3] cmd: tpm: Fix flush command
` [U-Boot] [PATCH 3/3] lib: tpm: Add command to list resources
[U-Boot] Linker error when using CONFIG_SPL_SYS_MALLOC_SIMPLE=y
2017-03-20 8:36 UTC (7+ messages)
[U-Boot] [PATCH 00/16] RFC: Board init using driver model
2017-03-20 7:54 UTC (20+ messages)
` [U-Boot] [PATCH 01/16] x86: Drop leading spaces in cpu_x86_get_desc()
` [U-Boot] [PATCH 02/16] x86: Display the SPL banner only once
` [U-Boot] [PATCH 03/16] x86: config: Enable dhrystone command for link
` [U-Boot] [PATCH 04/16] dm: board: Add a uclass for init functions
` [U-Boot] [PATCH 05/16] dm: board: Add a command to view phase info
` [U-Boot] [PATCH 06/16] dm: board: Adjust pre-relocation init hooks
` [U-Boot] [PATCH 07/16] dm: board: Support printing CPU info using the uclass
` [U-Boot] [PATCH 08/16] dm: sandbox: Convert to using driver-model baord init
` [U-Boot] [PATCH 09/16] dm: board: Add tests for the board uclass
` [U-Boot] [PATCH 10/16] dm: board: Add documentation
` [U-Boot] [PATCH 11/16] dm: x86: board: Enable CONFIG_BOARD
` [U-Boot] [PATCH 12/16] dm: x86: board: Add a BOARD_F_RESERVE_ARCH driver
` [U-Boot] [PATCH 13/16] dm: x86: board: ivybridge: Add support for CONFIG_BOARD
` [U-Boot] [PATCH 14/16] dm: x86: board: ivybridge: Switch to use CONFIG_BOARD
` [U-Boot] [PATCH 15/16] dm: x86: board: ivybridge: Remove old board init code
` [U-Boot] [PATCH 16/16] dm: board: Add information about the new board init to the README
[U-Boot] [PATCH v2 00/20] Add Intel Arria 10 SoC support
2017-03-20 7:33 UTC (5+ messages)
[U-Boot] [PATCH v2 0/6] sunxi: DM pinctrl implementation
2017-03-20 7:08 UTC (6+ messages)
` [U-Boot] [PATCH v2 2/6] dm: core: Allow multiple drivers to bind for a single node
[U-Boot] building cross_tools, _POSIX_C_SOURCE and _XOPEN_SOURCE are redefined
2017-03-20 6:41 UTC (2+ messages)
[U-Boot] [PATCH v1 0/1] arm64: enable SPL with ATF support
2017-03-20 6:41 UTC (2+ messages)
` [U-Boot] [PATCH v1] spl: add support to booting with ATF
[U-Boot] [PATCHv2] da850: Add instructions to copy AIS image to NAND
2017-03-20 5:36 UTC (2+ messages)
[U-Boot] [PATCH] libfdt: use CONFIG_IS_ENABLED for OF_LIBFDT
2017-03-20 4:36 UTC (5+ messages)
[U-Boot] [PATCH v2] libfdt: use CONFIG_IS_ENABLED for OF_LIBFDT
2017-03-20 4:34 UTC
[U-Boot] [PATCH 0/3] rockchip: rk3399: spl: Make baudrate and UART configurable
2017-03-20 0:34 UTC (7+ messages)
` [U-Boot] [PATCH 1/3] Kconfig: make CONFIG_BAUDRATE a first-class citizen
` [U-Boot] [PATCHv2 1/3] Kconfig: Migrate CONFIG_BAUDRATE
` [U-Boot] [PATCH 2/3] rockchip: rk3399: spl: add UART0 support for SPL
` [U-Boot] [PATCH 3/3] rockchip: config: rk3399: update defconfigs and rk3399_common
[U-Boot] [PULL] Please pull u-boot-imx
2017-03-20 0:34 UTC (2+ messages)
[U-Boot] U-boot multi-file format
2017-03-19 22:14 UTC
[U-Boot] [PATCH 10/14] drivers: net: add MV88E6xx to Kconfig
2017-03-19 17:47 UTC (4+ messages)
` [U-Boot] [PATCH v2 10/14] drivers: net: phy: add MV88E6xx options "
[U-Boot] [PATCH 1/3] mx7: Fix speed grade entry
2017-03-19 16:33 UTC (6+ messages)
` [U-Boot] [PATCH 2/3] mx7: Fix the get_cpu_speed_grade_hz() return values
` [U-Boot] [PATCH 3/3] mx7: Add 1.2GHz speed grade entry
[U-Boot] [PATCH 0/7] Toradex config cleanup and Colibri iMX7 enhencements
2017-03-19 16:32 UTC (2+ messages)
[U-Boot] [PATCHv2] arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD
2017-03-19 15:28 UTC (2+ messages)
[U-Boot] [PATCH v3] Add single register pin controller driver
2017-03-19 13:39 UTC (6+ messages)
[U-Boot] [PATCH v6 3/3] Kconfig: Disable non-FIT SPL loading for TI secure devices
2017-03-19 0:26 UTC (2+ messages)
` [U-Boot] [U-Boot, v6, "
[U-Boot] [PATCH v6 2/3] spl: Add option to enable SPL Legacy image support
2017-03-19 0:26 UTC (2+ messages)
` [U-Boot] [U-Boot, v6, "
[U-Boot] [PATCH v6 1/3] spl: Convert CONFIG_SPL_ABORT_ON_RAW_IMAGE into a positive option
2017-03-19 0:26 UTC (2+ messages)
` [U-Boot] [U-Boot, v6, "
[U-Boot] [PATCH] fdt_support: Fixup 'ethernet' aliases not ending in digits
2017-03-18 23:17 UTC (5+ messages)
[U-Boot] [PATCH] ARM: keystone: Pass SPI MTD partition table via kernel command line
2017-03-18 14:34 UTC (10+ messages)
[U-Boot] [PATCH] arch/arm/lib/relocate.S: Remove unreachable code
2017-03-18 14:13 UTC (4+ messages)
[U-Boot] [PATCH 1/2] rockchip: pinctrl: use per-SoC option names for Kconfig
2017-03-18 11:44 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] pinctrl: Kconfig: reorder to keep Rockchip options together
[U-Boot] uboot information
2017-03-18 8:25 UTC (3+ messages)
[U-Boot] Please pull u-boot-rockchip
2017-03-18 0:17 UTC (2+ messages)
[U-Boot] [PATCH 4/4] configs: move CMD_MD5SUM definition to defconfigs
2017-03-18 0:17 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 3/4] Kconfig: define MD5 dependency for FIT support
2017-03-18 0:17 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 2/4] Kconfig: introduce md5sum command selection
2017-03-18 0:17 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 1/4] kirkwood: remove get_random_hex() and MD5 dependency
2017-03-18 0:17 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH] arm: Update our 'ret' assembler macro slightly
2017-03-18 0:16 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v1] gpt: Fix uuid string format
2017-03-18 0:16 UTC (2+ messages)
` [U-Boot] [U-Boot,v1] "
[U-Boot] [PATCH v3 10/10] ARM: DT: stm32f7: add qspi pin contol node
2017-03-18 0:16 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v3 09/10] ARM: DT: stm32f7: add ethernet pin contol node
2017-03-18 0:16 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v3 08/10] ARM: DT: stm32f7: add pin control node for serial port pins
2017-03-18 0:16 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v3 07/10] ARM: DT: stm32f7: add pin control device node
2017-03-18 0:16 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v3 06/10] PINCTRL: stm32f7: add pin control driver
2017-03-18 0:16 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v3 05/10] stm32f7: clk: remove usart1 clock enable from board init
2017-03-18 0:16 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v3 04/10] ARM: DT: stm32f7: add usart1 & clock device tree nodes
2017-03-18 0:16 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v3 03/10] stm32f7: serial: use clock driver to enable clock
2017-03-18 0:16 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v3 02/10] clk: stm32f7: add clock driver for stm32f7 family
2017-03-18 0:15 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v3 01/10] serial: stm32f7: add device tree support
2017-03-18 0:15 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v1] cmd: itest: correct calculus for long format
2017-03-18 0:15 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH v3] arm: use common instructions applicable to armv7m & other arm archs
2017-03-18 0:15 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH v3 00/10] stm32f7: add clock and pin control drivers
2017-03-17 21:17 UTC (6+ messages)
[U-Boot] [PATCH v2] Pass empty CFLAGS on invocation of libfdt/setup.py
2017-03-17 19:45 UTC (2+ messages)
[U-Boot] [PATCH v2 0/2] add armv7m cache support
2017-03-17 19:06 UTC (8+ messages)
` [U-Boot] [PATCH v2 1/2] armv7m: add instruction & data "
[U-Boot] [PATCH v3 0/2] add armv7m cache support
2017-03-17 19:02 UTC (4+ messages)
` [U-Boot] [PATCH v3 1/2] armv7m: add instruction & data "
[U-Boot] [PATCH v2] dtoc: make ScanTree recurse into subnodes
2017-03-17 18:46 UTC (3+ messages)
[U-Boot] [PATCH 0/3] driver: ti_qspi: Use a SYSCON device to map the ctrl_mod_mmap register
2017-03-17 18:42 UTC (4+ messages)
` [U-Boot] [PATCH 3/3] configs: dra7x/am57x: Enable the SYSCON and REGMAP features
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox