messages from 2017-03-22 22:29:27 to 2017-03-24 03:28:04 UTC [more...]
[U-Boot] [PATCH 0/8] rockchip: rk3188: fixups and armclk speedup
2017-03-24 3:28 UTC (12+ messages)
` [U-Boot] [PATCH 1/8] rockchip: rk3188: sdram: Set correct sdram base
` [U-Boot] [PATCH 2/8] rockchip: rk3188: Decode the actual amount of ram
` [U-Boot] [PATCH 3/8] rockchip: rk3188: Cleanup some SPL/TPL rename leftovers
` [U-Boot] [PATCH 4/8] rockchip: clk: rk3188: Allow configuration of the armclk
` [U-Boot] [PATCH 5/8] rockchip: rk3188: Setup the armclk in spl
[U-Boot] [PATCH 0/7] *** SUBJECT HERE ***
2017-03-24 3:03 UTC (10+ messages)
` [U-Boot] [PATCH 1/7] scsi: move base, max_lun and max_id to uclass plat data
` [U-Boot] [PATCH 2/7] scsi: add children devices binding
` [U-Boot] [PATCH 3/7] scsi: call children devices' probe functions automatically
` [U-Boot] [PATCH 4/7] scsi: dt-bindings: add scsi device tree bindings
` [U-Boot] [PATCH 5/7] scsi: mvebu: add scsi driver
` [U-Boot] [PATCH 6/7] scsi: a3700: enable mvebu "
` [U-Boot] [PATCH 7/7] scsi: dts: a3700: add scsi node
` [U-Boot] [EXT] "
[U-Boot] [PATCH 0/3] rockchip: rk3188 fixed early stage and radxarock board
2017-03-24 2:40 UTC (5+ messages)
` [U-Boot] [PATCH 1/3] rockchip: rk3188: enable TPL_LIBGENERIC for generic memset
` [U-Boot] [PATCH 2/3] rockchip: rk3188: Add Radxa Rock board
` [U-Boot] [PATCH 3/3] rockchip: rk3188: add README.rockchip paragraph describing sd boot
[U-Boot] [PATCH] rockchip: Add support for MiQi rk3288 board
2017-03-24 2:38 UTC (2+ messages)
[U-Boot] [PATCH v2 0/2] rockchip: rk3399: spl: Make baudrate and UART configurable
2017-03-24 2:13 UTC (5+ messages)
` [U-Boot] [PATCH v2 1/2] rockchip: rk3399: spl: add UART0 support for SPL
` [U-Boot] [PATCH v2 2/2] rockchip: config: rk3399: update defconfigs and rk3399_common
[U-Boot] FIT image for falcon boot
2017-03-24 2:06 UTC
[U-Boot] [PATCH] ti: clocks: Fix do_enable_clocks() to accept NULL pointers as input parameters
2017-03-24 2:02 UTC (2+ messages)
[U-Boot] [PATCH v2] ARM: socfpga: add fpga build and bsp handoff instructions to readme
2017-03-24 1:58 UTC
[U-Boot] Please pull u-boot-dm
2017-03-24 1:44 UTC (2+ messages)
[U-Boot] [PATCH v2] configs: sama5d3xek: add default config for CMP board
2017-03-24 1:26 UTC
[U-Boot] [PATCH v6 0/4] ARM: dts: at91: add dts files for the boards of SAMA5D3/4
2017-03-24 1:18 UTC (5+ messages)
` [U-Boot] [PATCH v6 1/4] ARM: at91: dt: add dts files for sama5d3xek board
` [U-Boot] [PATCH v6 2/4] ARM: at91: dt: add dts file for sama5d3 Xplained
` [U-Boot] [PATCH v6 3/4] ARM: dts: at91: add dts files for sama5d4 Xplained
` [U-Boot] [PATCH v6 4/4] ARM: dts: at91: add dts file for sama5d4ek
[U-Boot] [PATCH v4 0/6] board: sama5d3: convert boards to support DM/DT
2017-03-24 1:14 UTC (7+ messages)
` [U-Boot] [PATCH v4 1/6] board: sama5d3xek: update "
` [U-Boot] [PATCH v4 2/6] board: sama5d3xek: clean up code
` [U-Boot] [PATCH v4 3/6] board: sama5d3xek: enable early debug UART
` [U-Boot] [PATCH v4 4/6] board: sama5d3_xplained: update to support DM/DT
` [U-Boot] [PATCH v4 5/6] board: sama5d3_xplained: clean up code
` [U-Boot] [PATCH v4 6/6] board: sama5d3_xplained: enable early debug UART
[U-Boot] [PATCH 00/17] Expand Aspeed AST2500 Support
2017-03-24 0:50 UTC (9+ messages)
` [U-Boot] [PATCH 05/17] aspeed: Reset Driver
` [U-Boot] [PATCH 16/17] aspeed: Add AST2500/AST2400 compatible NIC Driver
[U-Boot] [PATCH] rockchip: spl: RK3399: add COUNTER_FREQUENCY define to rk3399_common.h
2017-03-23 22:27 UTC
[U-Boot] [ PATCH 1/2] net: fix cache misaligned issue in Broadcom SF2 driver
2017-03-23 21:14 UTC (5+ messages)
` [U-Boot] [ PATCH 2/2] net: move Broadcom SF2 driver to Kconfig
[U-Boot] uboot information
2017-03-23 18:37 UTC (10+ messages)
[U-Boot] [PATCH] Remove extra fdt_fixup_ethernet() call
2017-03-23 17:02 UTC
[U-Boot] [PATCH v4 00/20] rk3188 uboot support
2017-03-23 16:34 UTC (5+ messages)
` [U-Boot] [PATCH v4 19/20] rockchip: rk3188: Add Radxa Rock board
[U-Boot] [PATCH v2 00/45] Add PPv2.2 support to the mvpp2 ethernet driver and enable it for A7k/8k
2017-03-23 16:02 UTC (46+ messages)
` [U-Boot] [PATCH v2 01/45] bitops.h: Include bitsperlong.h as needed for GENMASK_ULL
` [U-Boot] [PATCH v2 02/45] net: mvpp2: Round up top tx buffer boundaries for dcache ops
` [U-Boot] [PATCH v2 03/45] net: mvpp2: simplify mvpp2_bm_bufs_add()
` [U-Boot] [PATCH v2 04/45] net: mvpp2: remove unused register definitions
` [U-Boot] [PATCH v2 05/45] net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
` [U-Boot] [PATCH v2 06/45] net: mvpp2: simplify MVPP2_PRS_RI_* definitions
` [U-Boot] [PATCH v2 07/45] net: mvpp2: enable building on 64-bit platforms
` [U-Boot] [PATCH v2 08/45] net: mvpp2: enable building on 64-bit platforms (more U-Boot specific)
` [U-Boot] [PATCH v2 09/45] net: mvpp2: use "dma" instead of "phys" where appropriate
` [U-Boot] [PATCH v2 10/45] net: mvpp2: remove support for buffer header
` [U-Boot] [PATCH v2 11/45] net: mvpp2: store physical address of buffer in rx_desc->buf_cookie
` [U-Boot] [PATCH v2 12/45] net: mvpp2: add and use accessors for TX/RX descriptors
` [U-Boot] [PATCH v2 13/45] net: mvpp2: add hw_version field in "struct mvpp2"
` [U-Boot] [PATCH v2 14/45] net: mvpp2: introduce an intermediate union for the TX/RX descriptors
` [U-Boot] [PATCH v2 15/45] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors
` [U-Boot] [PATCH v2 16/45] net: mvpp2: adjust the allocation/free of BM pools for PPv2.2
` [U-Boot] [PATCH v2 17/45] net: mvpp2: adapt the mvpp2_rxq_*_pool_set functions to PPv2.2
` [U-Boot] [PATCH v2 18/45] net: mvpp2: adapt mvpp2_defaults_set() "
` [U-Boot] [PATCH v2 19/45] net: mvpp2: adjust mvpp2_{rxq, txq}_init for PPv2.2
` [U-Boot] [PATCH v2 20/45] net: mvpp2: handle register mapping and access "
` [U-Boot] [PATCH v2 21/45] net: mvpp2: handle misc PPv2.1/PPv2.2 differences
` [U-Boot] [PATCH v2 22/45] net: mvpp2: add AXI bridge initialization for PPv2.2
` [U-Boot] [PATCH v2 23/45] net: mvpp2: rework RXQ interrupt group "
` [U-Boot] [PATCH v2 24/45] net: mvpp2: adapt rxq distribution to PPv2.2
` [U-Boot] [PATCH v2 25/45] net: mvpp2: finally add the PPv2.2 compatible string
` [U-Boot] [PATCH v2 26/45] net: mvpp2: Add MDIO support for PPv2.2
` [U-Boot] [PATCH v2 27/45] net: mvpp2: Move probe function from MISC to ETH DM driver
` [U-Boot] [PATCH v2 28/45] net: mvpp2.c: Clear all buffer / descriptor areas before usage
` [U-Boot] [PATCH v2 29/45] net: mvpp2: Enable compilation for Armada 7K/8K platforms
` [U-Boot] [PATCH v2 30/45] arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K
` [U-Boot] [PATCH v2 31/45] arm64: mvebu: armada-7k/8k: Enable MVPP2 ethernet driver
` [U-Boot] [PATCH v2 32/45] net: mvpp2: Handle eth device naming in multi-CP case correctly
` [U-Boot] [PATCH v2 33/45] net: mvpp2: Add remove function that is called before the OS is started
` [U-Boot] [PATCH v2 34/45] net: mvpp2: Add RX and TX FIFO configuration for PPv2.2
` [U-Boot] [PATCH v2 35/45] net: include/phy.h: Add new PHY interface modes
` [U-Boot] [PATCH v2 36/45] net: mvpp2: Restructure probe / init functions
` [U-Boot] [PATCH v2 37/45] net: mvpp2: Read phy-speed from DT to select between 1GB and 2.5GB SGMII
` [U-Boot] [PATCH v2 38/45] net: mvpp2: Add GoP and NetC support for ports 2 & 3 (RGMII & SGMII)
` [U-Boot] [PATCH v2 39/45] net: mvpp2: Add GoP and NetC support for port 0 (SFI)
` [U-Boot] [PATCH v2 40/45] net: mvpp2: Add missing PHY_INTERFACE_MODE_RGMII_ID
` [U-Boot] [PATCH v2 41/45] net: mvpp2: Enable PHY polling mode on PPv2.2
` [U-Boot] [PATCH v2 42/45] net: mvpp2: Configure SMI PHY address needed for PHY polling
` [U-Boot] [PATCH v2 43/45] net: mvpp2: Remove unreferenced in_use_thresh from struct mvpp2_bm_pool
` [U-Boot] [PATCH v2 44/45] arm64: mvebu: armada-7040-db.dts: Change eth1 speed from 2.5G to 1G
` [U-Boot] [PATCH v2 45/45] arm64: mvebu: Enable CONFIG_PHY_MARVELL in Armada7k/8k-DB defconfig
[U-Boot] fatls returncode
2017-03-23 15:13 UTC (2+ messages)
[U-Boot] [PATCH v4] drivers/net/phy: add fixed-phy / fixed-link support
2017-03-23 14:16 UTC (3+ messages)
[U-Boot] [PATCH v5] drivers/net/phy: add fixed-phy / fixed-link support
2017-03-23 14:11 UTC
[U-Boot] about TLB mapping(Powerpc T1024RDB)
2017-03-23 13:47 UTC
[U-Boot] [PATCH 4/7] i2c: lpc32xx: Add DM for lpc32xx I2C
2017-03-23 11:07 UTC (2+ messages)
[U-Boot] [PATCH 3/7] i2c: lpc32xx: Factor out i2c_adapter parameter
2017-03-23 11:06 UTC (2+ messages)
[U-Boot] [PATCH v3 0/6] board: sama5d3: convert boards to support DM/DT
2017-03-23 10:35 UTC (8+ messages)
` [U-Boot] [PATCH v3 1/6] board: sama5d3xek: update "
` [U-Boot] [PATCH v3 2/6] board: sama5d3xek: clean up code
` [U-Boot] [PATCH v3 3/6] board: sama5d3xek: enable early debug UART
` [U-Boot] [PATCH v3 4/6] board: sama5d3_xplained: update to support DM/DT
` [U-Boot] [PATCH v3 5/6] board: sama5d3_xplained: clean up code
` [U-Boot] [PATCH v3 6/6] board: sama5d3_xplained: enable early debug UART
[U-Boot] [PATCH] arm64/ls1046a: Enable ERRATUM_A008850 for ls1046a SoC
2017-03-23 10:14 UTC
[U-Boot] [PATCH 0/3 v3] arm: mvebu: Add gdsys ControlCenter-Compact board
2017-03-23 10:13 UTC (6+ messages)
` [U-Boot] [PATCH 3/3 v3] controlcenterdc: Make secure boot available
[U-Boot] [PATCH 00/21] STiH410-B2260: add reset, usb and fastboot support
2017-03-23 9:59 UTC (7+ messages)
` [U-Boot] [PATCH 05/21] phy: Add STi phy usb support
` [U-Boot] [PATCH 06/21] usb: ehci: Add STi ehci support
[U-Boot] [PATCH v2 00/20] Add Intel Arria 10 SoC support
2017-03-23 9:54 UTC (11+ messages)
` [U-Boot] [PATCH v2 07/20] arm: socfpga: Add reset driver support for Arria 10
` [U-Boot] [PATCH v2 17/20] arm: socfpga: Convert Altera ddr driver to use Kconfig
[U-Boot] [PATCH v2 0/1] arm64: enable SPL with ATF support
2017-03-23 9:22 UTC (3+ messages)
` [U-Boot] [PATCH v2] spl: add support to booting with ATF
[U-Boot] [PATCH 0/7] Add LS1046 and LS1012 secure boot targets
2017-03-23 8:18 UTC (8+ messages)
` [U-Boot] [PATCH 1/7] SECURE BOOT: Add header address of PPA in kconfig
` [U-Boot] [PATCH 2/7] LS1043ARDB: Enable PPA in Secure boot defconfig
` [U-Boot] [PATCH 3/7] SECURE_BOOT: Enable chain of trust on LS1046A platform
` [U-Boot] [PATCH 4/7] LS1046AQDS: Add NOR Secure Boot Target
` [U-Boot] [PATCH 5/7] LS1046ARDB: Add QSPI Secure Boot target
` [U-Boot] [PATCH 6/7] SECURE_BOOT: Enable chain of trust on LS1012A platform
` [U-Boot] [PATCH 7/7] LS1012ARDB: Add QSPI Secure Boot target
[U-Boot] [PATCH] configs: imx6: Select missing BOARD_LATE_INIT
2017-03-23 7:32 UTC
[U-Boot] [PATCH] board: sama5d4ek: fix DD2 configuration
2017-03-23 6:35 UTC
[U-Boot] [PATCH 0/7] board: sama5d2_xplained: improves
2017-03-23 6:26 UTC (8+ messages)
` [U-Boot] [PATCH 1/7] ARM: dts: sama5d2: add clock property for uart1 node
` [U-Boot] [PATCH 2/7] ARM: dts: sama5d2_xplained: update for SPL
` [U-Boot] [PATCH 3/7] configs: sama5d2_xplained: enable CONFIG_DM_ETH
` [U-Boot] [PATCH 4/7] board: sama5d2_xplained: clean up macb init code
` [U-Boot] [PATCH 5/7] board: sama5d2_xplained: remove uart1 init
` [U-Boot] [PATCH 6/7] board: sama5d2_xplained: remove unnecessary header files
` [U-Boot] [PATCH 7/7] configs: sama5d2_xplained: update for SPL
[U-Boot] [PATCH v4 0/7] board: sama5d4: convert boards to support DM/DT
2017-03-23 6:11 UTC (8+ messages)
` [U-Boot] [PATCH v4 1/7] configs: at91-sama5_common: fix for CONFIG_AT91_GPIO
` [U-Boot] [PATCH v4 2/7] board: sama5d4_xplained: update to support DM/DT
` [U-Boot] [PATCH v4 3/7] board: sama5d4_xplained: clean up code
` [U-Boot] [PATCH v4 4/7] board: sama5d4_xplained: enable early debug UART
` [U-Boot] [PATCH v4 5/7] board: sama5d4ek: update to support DM/DT
` [U-Boot] [PATCH v4 6/7] board: sama5d4ek: clean up code
` [U-Boot] [PATCH v4 7/7] board: sama5d4ek: enable early debug UART
[U-Boot] [PATCH v5 0/4] ARM: dts: at91: add dts files for the boards of SAMA5D3/4
2017-03-23 5:20 UTC (5+ messages)
` [U-Boot] [PATCH v5 1/4] ARM: at91: dt: add dts files for sama5d3xek board
` [U-Boot] [PATCH v5 2/4] ARM: at91: dt: add dts file for sama5d3 Xplained
` [U-Boot] [PATCH v5 3/4] ARM: dts: at91: add dts files for sama5d4 Xplained
` [U-Boot] [PATCH v5 4/4] ARM: dts: at91: add dts file for sama5d4ek
[U-Boot] [PATCH v3 0/2] mtd: nand: atmel: use another functions to set gpio value
2017-03-23 4:55 UTC (3+ messages)
` [U-Boot] [PATCH v3 1/2] ARM: at91: gpio: fix at91_set_gpio_value() define
` [U-Boot] [PATCH v3 2/2] mtd: nand: atmel: use another functions to set gpio value
[U-Boot] [PATCH] net: macb: align the compatibles with kernel
2017-03-23 4:54 UTC
[U-Boot] [PATCH v2] net: macb: add remove callback
2017-03-23 4:53 UTC
[U-Boot] [PATCH v3 0/2] clk: at91: enhance the peripheral clock
2017-03-23 4:52 UTC (3+ messages)
` [U-Boot] [PATCH v3 1/2] "
` [U-Boot] [PATCH v3 2/2] clk: at91: align clk-master compatibles with kernel
[U-Boot] [PATCH v2] clk: at91: pmc: align the at91 pmc's compatibles
2017-03-23 4:51 UTC
[U-Boot] [PATCH 0/2] serial: atmel_usart: fix uart init and add clk support
2017-03-23 4:50 UTC (3+ messages)
` [U-Boot] [PATCH 1/2] serial: atmel_usart: fix early debug not work in SPL
` [U-Boot] [PATCH 2/2] serial: atmel_usart: add clk support
[U-Boot] [PATCH v2] spi: atmel: check GPIO validity before using cs_gpios
2017-03-23 4:49 UTC
[U-Boot] [PATCH v5] mmc: gen_atmel_mci: add driver model support for mci
2017-03-23 4:48 UTC
[U-Boot] [PATCH v4 0/3] gpio: at91_gpio: add option and clock support
2017-03-23 4:46 UTC (4+ messages)
` [U-Boot] [PATCH v4 1/3] gpio: Kconfig: add CONFIG_AT91_GPIO option
` [U-Boot] [PATCH v4 2/3] gpio: at91_gpio: add the device tree support
` [U-Boot] [PATCH v4 3/3] gpio: at91_gpio: add the clock support
[U-Boot] [PATCH v8 0/2] pinctrl: at91: Add pinctrl driver
2017-03-23 4:44 UTC (3+ messages)
` [U-Boot] [PATCH v8 1/2] gpio: at91_gpio: remove CPU_HAS_PIO3 macro
` [U-Boot] [PATCH v8 2/2] pinctrl: at91: add pinctrl driver
[U-Boot] [PATCH 0/5] ARM: SPL: at91: update to support DM/DT
2017-03-23 4:41 UTC (6+ messages)
` [U-Boot] [PATCH 1/5] ARM: at91: spl: specify MMC and NAND boot device
` [U-Boot] [PATCH 2/5] ARM: spl: atmel: bring in serial device before init
` [U-Boot] [PATCH 3/5] ARM: spl: atmel: move mem_init() advance in SPL init
` [U-Boot] [PATCH 4/5] ARM: at91: lds: use "_image_binary_end" for DT location
` [U-Boot] [PATCH 5/5] ARM: at91: lds: add test SPL binary size and bbs size
[U-Boot] ti: ARM: svc: Question about switching to am57xx HYP mode
2017-03-23 4:03 UTC (2+ messages)
[U-Boot] [RESEND PATCH v2 0/1] arm64: enable SPL with ATF support
2017-03-23 3:07 UTC (2+ messages)
` [U-Boot] [RESEND PATCH v2] spl: add support to booting with ATF
[U-Boot] [PATCH v1 0/1] arm64: enable SPL with ATF support
2017-03-23 2:59 UTC (4+ messages)
` [U-Boot] [PATCH v1] spl: add support to booting with ATF
[U-Boot] [PATCH] imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOM
2017-03-23 0:27 UTC (3+ messages)
[U-Boot] FIT image for falcon boot
2017-03-22 23:40 UTC
[U-Boot] env_init() for mmc
2017-03-22 22:58 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox