public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
 messages from 2017-04-13 06:27:40 to 2017-04-14 10:15:28 UTC [more...]

[U-Boot] [PATCH] rockchip: sysreset: rk3188: Make sure remap is off on warm-resets
 2017-04-14 10:15 UTC  (3+ messages)

[U-Boot] [PATCH] rockchip: rk3399: do not use lower address
 2017-04-14 10:15 UTC  (3+ messages)

[U-Boot] [PATCH v2] rockchip: rk3188: enable remap function
 2017-04-14 10:15 UTC  (3+ messages)

[U-Boot] [PATCH] rockchip: cosmetic: Move rock board to its correct position
 2017-04-14 10:15 UTC  (3+ messages)

[U-Boot] rockchip: Add USB to the default boot targets
 2017-04-14 10:15 UTC  (3+ messages)

[U-Boot] rockchip: tinker: configs: Add USB, PXE, DHCP to the default boot targets
 2017-04-14 10:15 UTC  (3+ messages)

[U-Boot] [PATCH v3 1/2] spl: rk3399: disable DDR security regions for SPL (for DMA in dw_mmc)
 2017-04-14 10:15 UTC  (6+ messages)
` [U-Boot] [PATCH v3 2/2] dts: rk3399-puma: disable 'fifo-mode' in sdmmc

[U-Boot] rockchip: rk3288: grf: FIX the correct gmac tx_delay shift
 2017-04-14  9:24 UTC  (3+ messages)

[U-Boot] [PATCH] driver: net: fsl-mc: Update fsl_mc_ldpaa_exit() path
 2017-04-14  8:55 UTC  (2+ messages)

[U-Boot] [PATCH] armv8: ls1046a: enable PCI command tool
 2017-04-14  8:49 UTC 

[U-Boot] mmc: meson: switch mmc slot order and allow to store environment in eMMC
 2017-04-14  8:26 UTC  (3+ messages)
` [U-Boot] [PATCH 1/2] arm: dts: odroid-c2: assign mmc device number 0 to eMMC slot
` [U-Boot] [PATCH 2/2] odroid-c2: support storing the uboot environment in eMMC

[U-Boot] mmc: meson: increase max block number per request
 2017-04-14  8:10 UTC 

[U-Boot] [PATCH] rockchip: rk3399: defconfig: add CONFIG_OF_EMBED support
 2017-04-14  7:59 UTC  (5+ messages)

[U-Boot] [PATCH v3 0/2] serial: atmel_usart: Fix uart init and add clk support
 2017-04-14  7:01 UTC  (3+ messages)
` [U-Boot] [PATCH v3 1/2] serial: atmel_usart: Fix early debug not work in SPL
` [U-Boot] [PATCH v3 2/2] serial: atmel_usart: Add clk support

[U-Boot] [PATCH] mkimage: rockchip: add support for rk3328
 2017-04-14  6:55 UTC 

[U-Boot] [PATCH v4 0/3] clk: at91: Enhance the peripheral clock and align compatibles
 2017-04-14  6:53 UTC  (4+ messages)
` [U-Boot] [PATCH v4 1/3] clk: at91: Enhance the peripheral clock
` [U-Boot] [PATCH v4 2/3] clk: at91: Align clk-master compatibles with kernel
` [U-Boot] [PATCH v4 3/3] clk: at91: Align the at91 pmc's compatibles

[U-Boot] [GIT PULL] Please pull u-boot-mmc master
 2017-04-14  6:51 UTC 

[U-Boot] [PATCH 1/4] fsl-layerscape/ls1043aqds: Integrate FSL PPA
 2017-04-14  6:48 UTC  (4+ messages)
` [U-Boot] [PATCH 2/4] fsl-layerscape/ls1043aqds: enable "
` [U-Boot] [PATCH 3/4] fsl-layerscape/ls1046aqds: Integrate "
` [U-Boot] [PATCH 4/4] fsl-layerscape/ls1046aqds: enable "

[U-Boot] [PATCH v3 0/2] net: macb: Add remove callback and align the compatibles
 2017-04-14  6:36 UTC  (3+ messages)
` [U-Boot] [PATCH v3 1/2] net: macb: Add remove callback
` [U-Boot] [PATCH v3 2/2] net: macb: Align the compatibles with kernel

[U-Boot] [PATCH] mmc: zynq_sdhci: improve debug print
 2017-04-14  6:32 UTC  (3+ messages)

[U-Boot] [PATCH 0/2] Improve Raspberry Pi mmc writes
 2017-04-14  6:24 UTC 

[U-Boot] [PATCH v7 0/3] mmc: meson: add MMC support for Meson GX (S905)
 2017-04-14  6:22 UTC  (8+ messages)
    ` [U-Boot] [PATCH v7 1/3] arm: dts: update Meson GXBB / Odroid-C2 DT with recent Linux version
    ` [U-Boot] [PATCH v7 2/3] mmc: meson: add MMC driver for Meson GX (S905)
    ` [U-Boot] [PATCH v7 3/3] odroid-c2: enable new Meson GX MMC driver in board defconfig

[U-Boot] [PATCH v6] mmc: gen_atmel_mci: add driver model support for mci
 2017-04-14  6:21 UTC  (2+ messages)

[U-Boot] [PATCH v3 0/3] board: at91sam9263ek: Convert to support DM and DT
 2017-04-14  3:07 UTC  (4+ messages)
` [U-Boot] [PATCH v3 1/3] configs: at91sam9263ek: Update for DT and DM support
` [U-Boot] [PATCH v3 2/3] board: at91sam9263ek: Clean up code
` [U-Boot] [PATCH v3 3/3] board: at91sam9263ek: Enable early debug UART

[U-Boot] [PATCH v3 0/3] board: at91sam9rlek: Convert to support DM and DT
 2017-04-14  2:49 UTC  (4+ messages)
` [U-Boot] [PATCH v3 1/3] configs: at91sam9rlek: Update for DT and DM support
` [U-Boot] [PATCH v3 2/3] board: at91sam9rlek: Clean up code
` [U-Boot] [PATCH v3 3/3] board: at91sam9rlek: Enable early debug UART

[U-Boot] [PATCH v4 0/3] board: at91sam9260ek/9g20ek: Convert to support DM and DT
 2017-04-14  2:32 UTC  (4+ messages)
` [U-Boot] [PATCH v4 1/3] configs: at91sam9260ek/9g20ek: Update for DT and DM
` [U-Boot] [PATCH v4 2/3] board: at91sam9260ek: Clean up code
` [U-Boot] [PATCH v4 3/3] board: at91sam9260ek/9g20ek: Enable early debug UART

[U-Boot] [PATCH] ARM: uniphier: setup EHCI PHY paramters for LD11
 2017-04-14  2:30 UTC 

[U-Boot] [PATCH v3 0/3] board: at91sam9n12ek: Convert to support DM and DT
 2017-04-14  2:16 UTC  (4+ messages)
` [U-Boot] [PATCH v3 1/3] configs: at91sam9n12ek: Update for DT and DM support
` [U-Boot] [PATCH v3 2/3] board: at91sam9n12ek: Clean up code
` [U-Boot] [PATCH v3 3/3] board: at91sam9n12ek: Enable early debug UART

[U-Boot] [PATCH v3 0/3] ARM: support System Reset via PSCI
 2017-04-14  2:10 UTC  (4+ messages)
` [U-Boot] [PATCH v3 1/3] ARM: import arm-smccc code from Linux 4.11-rc6
` [U-Boot] [PATCH v3 2/3] ARM: adjust arm-smccc code for use in U-Boot
` [U-Boot] [PATCH v3 3/3] sysreset: psci: support system reset in a generic way with PSCI

[U-Boot] [PATCH] blackfin: ibf-dsp561: remove orphan Blackfin board
 2017-04-14  2:05 UTC 

[U-Boot] [PATCH v3 0/3] board: at91sam9m10g45ek: Convert to support DM and DT
 2017-04-14  1:59 UTC  (4+ messages)
` [U-Boot] [PATCH v3 1/3] configs: at91sam9m10g45ek: Update to support DM/DT
` [U-Boot] [PATCH v3 2/3] board: at91sam9m10g45ek: Clean up code
` [U-Boot] [PATCH v3 3/3] board: at91sam9m10g45ek: Enable early debug UART

[U-Boot] [PATCH 1/2] cmd: remove Blackfin specific commands
 2017-04-14  1:55 UTC  (2+ messages)
` [U-Boot] [PATCH 2/2] drivers: remove Blackfin specific drivers

[U-Boot] [PATCH] tools: moveconfig: remove GCC prefix of obsolete architecture
 2017-04-14  1:53 UTC 

[U-Boot] [PATCH v4 0/3] board: at91sam9x5ek: Convert to support DM and DT
 2017-04-14  1:44 UTC  (4+ messages)
` [U-Boot] [PATCH v4 1/3] configs: at91sam9x5ek: Update to support DM/DT
` [U-Boot] [PATCH v4 2/3] board: at91sam9x5ek: Clean up code
` [U-Boot] [PATCH v4 3/3] board: at91sam9x5ek: Enable early debug UART

[U-Boot] [PATCH v2 0/6] ARM: dts: at91: Add dts files for AT91 SoCs' boards
 2017-04-14  1:11 UTC  (7+ messages)
` [U-Boot] [PATCH v2 1/6] ARM: dts: at91: Add dts files for at91sam9x5ek
` [U-Boot] [PATCH v2 2/6] ARM: dts: at91: Add dts files for at91sam9n12ek
` [U-Boot] [PATCH v2 3/6] ARM: dts: at91: Add dts files for at91sam9m10g45ek
` [U-Boot] [PATCH v2 4/6] ARM: dts: at91: Add dts files for at91sam9260ek/9g20ek
` [U-Boot] [PATCH v2 5/6] ARM: dts: at91: Add dts files for at91sam9rlek
` [U-Boot] [PATCH v2 6/6] ARM: dts: at91: Add dts files for at91sam9263ek

[U-Boot] [PATCH] QE: add QE support on SD boot
 2017-04-14  1:02 UTC 

[U-Boot] [PATCH v5 0/6] board: sama5d3: Convert to support DM/DT
 2017-04-14  0:51 UTC  (7+ messages)
` [U-Boot] [PATCH v5 1/6] board: sama5d3xek: Update "
` [U-Boot] [PATCH v5 2/6] board: sama5d3xek: Clean up code
` [U-Boot] [PATCH v5 3/6] board: sama5d3xek: Enable early debug UART
` [U-Boot] [PATCH v5 4/6] board: sama5d3_xplained: Update to support DM/DT
` [U-Boot] [PATCH v5 5/6] board: sama5d3_xplained: Clean up code
` [U-Boot] [PATCH v5 6/6] board: sama5d3_xplained: Enable early debug UART

[U-Boot] [PATCH 1/2] imx-common: Enable ACTLR.SMP bit for i.MX cortex-a7 platforms
 2017-04-13 22:21 UTC  (6+ messages)

[U-Boot] [PATCH] imx6_logic: Remove unnecessary definition
 2017-04-13 21:57 UTC 

[U-Boot] Please pull u-boot-dm
 2017-04-13 21:27 UTC 

[U-Boot] [PATCH v5 0/7] board: sama5d4: convert boards to support DM/DT
 2017-04-13 21:17 UTC  (15+ messages)
` [U-Boot] [PATCH v5 1/7] configs: at91-sama5_common: fix for CONFIG_AT91_GPIO
` [U-Boot] [PATCH v5 2/7] board: sama5d4_xplained: update to support DM/DT
` [U-Boot] [PATCH v5 3/7] board: sama5d4_xplained: clean up code
` [U-Boot] [PATCH v5 4/7] board: sama5d4_xplained: enable early debug UART
` [U-Boot] [PATCH v5 5/7] board: sama5d4ek: update to support DM/DT
` [U-Boot] [PATCH v5 6/7] board: sama5d4ek: clean up code
` [U-Boot] [PATCH v5 7/7] board: sama5d4ek: enable early debug UART

[U-Boot] [PATCH v2 0/4] ARM: SPL: at91: update to support DM/DT
 2017-04-13 21:17 UTC  (9+ messages)
` [U-Boot] [PATCH v2 1/4] ARM: at91: spl: specify MMC and NAND boot device
` [U-Boot] [PATCH v2 2/4] ARM: spl: atmel: bring in serial device before init
` [U-Boot] [PATCH v2 3/4] ARM: spl: atmel: move mem_init() advance in SPL init
` [U-Boot] [PATCH v2 4/4] ARM: at91: lds: use "_image_binary_end" for DT location

[U-Boot] [PATCH v6 0/4] ARM: dts: at91: add dts files for the boards of SAMA5D3/4
 2017-04-13 21:17 UTC  (9+ messages)
` [U-Boot] [PATCH v6 1/4] ARM: at91: dt: add dts files for sama5d3xek board
` [U-Boot] [PATCH v6 2/4] ARM: at91: dt: add dts file for sama5d3 Xplained
` [U-Boot] [PATCH v6 3/4] ARM: dts: at91: add dts files for sama5d4 Xplained
` [U-Boot] [PATCH v6 4/4] ARM: dts: at91: add dts file for sama5d4ek

[U-Boot] [PATCH v4 0/3] gpio: at91_gpio: add option and clock support
 2017-04-13 21:16 UTC  (7+ messages)
` [U-Boot] [PATCH v4 1/3] gpio: Kconfig: add CONFIG_AT91_GPIO option
` [U-Boot] [PATCH v4 2/3] gpio: at91_gpio: add the device tree support
` [U-Boot] [PATCH v4 3/3] gpio: at91_gpio: add the clock support

[U-Boot] [PATCH v8 0/2] pinctrl: at91: Add pinctrl driver
 2017-04-13 21:16 UTC  (6+ messages)
` [U-Boot] [PATCH v8 1/2] gpio: at91_gpio: remove CPU_HAS_PIO3 macro
` [U-Boot] [PATCH v8 2/2] pinctrl: at91: add pinctrl driver

[U-Boot] [PATCH v3 0/2] mtd: nand: atmel: use another functions to set gpio value
 2017-04-13 21:16 UTC  (6+ messages)
` [U-Boot] [PATCH v3 1/2] ARM: at91: gpio: fix at91_set_gpio_value() define
` [U-Boot] [PATCH v3 2/2] mtd: nand: atmel: use another functions to set gpio value

[U-Boot] [PATCH] buildman: Handle commit subjects containing unicode
 2017-04-13 21:16 UTC  (2+ messages)

[U-Boot] [PATCH] tools: allow to override python
 2017-04-13 21:16 UTC  (4+ messages)

[U-Boot] [PATCH] dm: core: Ensure DMA regions start up with the cache clean
 2017-04-13 21:16 UTC  (2+ messages)

[U-Boot] [PATCH] core/uclass: Print name of device in uclass_find_device_by_seq()
 2017-04-13 21:16 UTC  (3+ messages)

[U-Boot] [PATCH] fdtgrep: Copy with the /aliases node being last
 2017-04-13 21:16 UTC  (4+ messages)

[U-Boot] [PATCH 1/2] patman: Convert byte arrays to strings
 2017-04-13 21:16 UTC  (6+ messages)
` [U-Boot] [PATCH 2/2] dtoc: Decode val if it's a byte string

[U-Boot] Why is ns16550 guarded by !OF_PLATDATA ?
 2017-04-13 21:16 UTC  (4+ messages)
` [U-Boot] [PATCH] serial: ns16550: Link in the DM driver when when using platdata

[U-Boot] [PATCHv5 00/21] Retrieve MAC address from EEPROM
 2017-04-13 21:16 UTC  (5+ messages)
` [U-Boot] [PATCHv2 01/21] net: cosmetic: Do not use magic values for ARP_HLEN
` [U-Boot] [PATCHv2 02/21] net: core: Sanitize get/set operations for enetaddr

[U-Boot] [PATCH 00/22] x86: Add ACPI S3 resume support
 2017-04-13 21:15 UTC  (13+ messages)
` [U-Boot] [PATCH 11/22] x86: acpi: Resume OS if resume vector is found
` [U-Boot] [PATCH 13/22] x86: fsp: Save stack address to CMOS for next S3 boot
` [U-Boot] [PATCH 20/22] x86: pci: Allow conditionally run VGA rom in S3

[U-Boot] [PATCH] ARM: tegra: remove Whistler support
 2017-04-13 18:57 UTC 

[U-Boot] [PATCH v5 00/16] Add Intel Arria 10 SoC support
 2017-04-13 17:41 UTC  (18+ messages)
` [U-Boot] [PATCH v5 01/16] arm: socfpga: Restructure clock manager driver
` [U-Boot] [PATCH v5 02/16] arm: socfpga: Restructure reset "
` [U-Boot] [PATCH v5 03/16] arm: socfpga: Restructure system manager
` [U-Boot] [PATCH v5 04/16] arm: socfpga: Restructure misc driver
` [U-Boot] [PATCH v5 05/16] arm: socfpga: Add A10 macros
` [U-Boot] [PATCH v5 06/16] arm: socfpga: Add reset driver support for Arria 10
` [U-Boot] [PATCH v5 07/16] arm: socfpga: Add clock driver "
` [U-Boot] [PATCH v5 08/16] arm: socfpga: Add system manager "
` [U-Boot] [PATCH v5 09/16] arm: socfpga: Add sdram header file "
` [U-Boot] [PATCH v5 10/16] arm: socfpga: Add pinmux "
` [U-Boot] [PATCH v5 11/16] arm: socfpga: Add misc support "
` [U-Boot] [PATCH v5 12/16] arm: dts: Add dts and dtsi "
` [U-Boot] [PATCH v5 13/16] arm: socfpga: Add SPL support "
` [U-Boot] [PATCH v5 14/16] arm: socfpga: Add config and defconfig "
` [U-Boot] [PATCH v5 15/16] arm: socfpga: Add board files for the Arria10
` [U-Boot] [PATCH v5 16/16] arm: socfpga: Enable build for Arria 10

[U-Boot] [Patch 3/3,v2] armv7: ls1021a: Drop macro CONFIG_LS102XA
 2017-04-13 16:08 UTC 

[U-Boot] [PATCH 1/2][v4] armv8: ls2080a: Reorganise NAND_BOOT code in config flag
 2017-04-13 15:45 UTC  (5+ messages)
` [U-Boot] [PATCH 2/2][v4] armv8: ls2080aqds: Add support for SD boot

[U-Boot] [PATCH 0/8] Add support for Broadcom MIPS SoCs
 2017-04-13 15:44 UTC  (9+ messages)
` [U-Boot] [PATCH 1/8] cmd: cpu: fix NULL cpu feature prints
` [U-Boot] [PATCH 2/8] sysreset: add syscon-reboot driver
` [U-Boot] [PATCH 3/8] mips: allow using generic sysreset drivers
` [U-Boot] [PATCH 4/8] serial: add serial driver for BCM6345
` [U-Boot] [PATCH 5/8] mips: add support for Broadcom MIPS
` [U-Boot] [PATCH 6/8] mips: bmips: fix first CPU check
` [U-Boot] [PATCH 7/8] mips: bmips: fix ioremap for BCM6358
` [U-Boot] [PATCH 8/8] mips: bmips: add support for raw .elf images

[U-Boot] [PATCH] nxp/ls2088ardb: Add QSPI-boot support
 2017-04-13 15:36 UTC  (5+ messages)

[U-Boot] [PATCH 2/3][v3] arm: ls1043ardb: Add NAND secure boot target
 2017-04-13 15:07 UTC  (4+ messages)

[U-Boot] [RFC, 1/2] NVMe: add NVMe driver support
 2017-04-13 15:02 UTC  (6+ messages)

[U-Boot] [PATCH v5 0/8] arm: socfpga: Move to using distro boot
 2017-04-13 14:30 UTC  (9+ messages)
` [U-Boot] [PATCH v5 1/8] arm: socfpga: Add distro boot to socfpga common header
` [U-Boot] [PATCH v5 2/8] arm: socfpga: DE0 use environment in "
` [U-Boot] [PATCH v5 3/8] arm: socfpga: A5 SoCDK "
` [U-Boot] [PATCH v5 4/8] arm: socfpga: C5 "
` [U-Boot] [PATCH v5 5/8] arm: socfpga: DE1 "
` [U-Boot] [PATCH v5 6/8] arm: socfpga: SoCKit "
` [U-Boot] [PATCH v5 7/8] arm: socfpga: Socrates "
` [U-Boot] [PATCH v5 8/8] arm: socfpga: sr1500 "

[U-Boot] [PATCH v2 00/10] OMAP: Move SATA to use block driver model
 2017-04-13 14:18 UTC  (7+ messages)
` [U-Boot] [PATCH v2 03/10] drivers: phy: add generic PHY framework
` [U-Boot] [PATCH v2 05/10] dra7: dtsi: mark ocp2scp bus compatible with "simple-bus"

[U-Boot] [PATCH v2 0/3] ARM: support System Reset via PSCI
 2017-04-13 13:57 UTC  (3+ messages)
` [U-Boot] [PATCH v2 2/3] ARM: adjust arm-smccc code for use in U-Boot

[U-Boot] [bug report]dtoc output order for spl dts nodes
 2017-04-13 10:11 UTC 

[U-Boot] [PATCH][v2] board: ls2080ardb: Add phy number for serdes1 protocol 0x4b
 2017-04-13 10:01 UTC 

[U-Boot] [PATCH v5 00/16] GPT over MTD
 2017-04-13  9:52 UTC  (17+ messages)
` [U-Boot] [PATCH v5 01/16] uuid: add a function for GUID string parsing
` [U-Boot] [PATCH v5 02/16] disk: part: refactor part_print_efi to prepare GPT over MTD
` [U-Boot] [PATCH v5 03/16] disk: part: refactor part_get_info_efi "
` [U-Boot] [PATCH v5 04/16] disk: part: prepare_backup_gpt_header rework
` [U-Boot] [PATCH v5 05/16] disk: part: compute partition_entry_lba
` [U-Boot] [PATCH v5 06/16] disk: part: efi: export internal function
` [U-Boot] [PATCH v5 07/16] disk: part: add support of GPT partitioning over MTD
` [U-Boot] [PATCH v5 08/16] cmd: gpt: remove blk_desc parameter in static function
` [U-Boot] [PATCH v5 09/16] cmd: gpt: use error number in set_gpt_info
` [U-Boot] [PATCH v5 10/16] cmd: gpt: add print_gpt_info_err
` [U-Boot] [PATCH v5 11/16] cmd: gpt: update write command to support GPT over MTD
` [U-Boot] [PATCH v5 12/16] cmd: part: update "
` [U-Boot] [PATCH v5 13/16] cmd: mtdparts: move PART_ADD_DESC_MAXLEN
` [U-Boot] [PATCH v5 14/16] cmd: mtdparts: update command to support GPT over MTD
` [U-Boot] [PATCH v5 15/16] uuid: remove dependency with io.h
` [U-Boot] [PATCH v5 16/16] sandbox: GPT over MTD test

[U-Boot] [PULL] Please pull u-boot-imx
 2017-04-13  8:01 UTC 


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox