messages from 2017-04-23 00:42:21 to 2017-04-25 00:42:01 UTC [more...]
[U-Boot] [PATCH v6 00/16] Add Intel Arria 10 SoC support
2017-04-25 0:42 UTC (14+ messages)
` [U-Boot] [PATCH v6 13/16] arm: socfpga: Add SPL support for Arria 10
[U-Boot] arm: mxs: No arch specific invalidate_icache_all available!
2017-04-24 23:12 UTC (2+ messages)
[U-Boot] [PATCH 0/8] Add support for Broadcom MIPS SoCs
2017-04-24 22:39 UTC (16+ messages)
` [U-Boot] [PATCH v6 00/14] "
` [U-Boot] [PATCH v6 01/14] cmd: cpu: fix NULL cpu feature prints
` [U-Boot] [PATCH v6 02/14] sysreset: add syscon-reboot driver
` [U-Boot] [PATCH v6 03/14] MIPS: allow using generic sysreset drivers
` [U-Boot] [PATCH v6 04/14] serial: add serial driver for BCM6345
` [U-Boot] [PATCH v6 05/14] cmd: cpu: refactor to ensure devices are probed and improve code style
` [U-Boot] [PATCH v6 06/14] cpu: add CPU driver for Broadcom MIPS SoCs
` [U-Boot] [PATCH v6 07/14] ram: add RAM "
` [U-Boot] [PATCH v6 08/14] MIPS: add initial infrastructure "
` [U-Boot] [PATCH v6 09/14] MIPS: add support for Broadcom MIPS BCM6358 SoC family
` [U-Boot] [PATCH v6 10/14] MIPS: add BMIPS Huawei HG556a board
` [U-Boot] [PATCH v6 11/14] MIPS: add support for Broadcom MIPS BCM6328 SoC family
` [U-Boot] [PATCH v6 12/14] MIPS: add BMIPS Comtrend AR-5387un board
` [U-Boot] [PATCH v6 13/14] MIPS: add support for Broadcom MIPS BCM63268 SoC family
` [U-Boot] [PATCH v6 14/14] MIPS: add BMIPS Comtrend VR-3032u board
[U-Boot] [PATCH v3 0/6] sunxi: video: Add support for HDMI output on A64/H3/H5
2017-04-24 21:54 UTC (5+ messages)
[U-Boot] [PATCH] arm: dts: imx: add aliases for usbotg nodes
2017-04-24 21:20 UTC
[U-Boot] [PATCH v4 00/18] stm32f7: add sdram & gpio drivers
2017-04-24 19:39 UTC (2+ messages)
[U-Boot] [PATCH] power: twl4030: Add CONFIG_CMD_POWEROFF support
2017-04-24 18:34 UTC
[U-Boot] [PATCH] sunxi: fix the default value of CONS_INDEX on non-A23/A33 SUN8I
2017-04-24 17:39 UTC
[U-Boot] [PATCH v3 00/19] SPL: extend FIT loading support
2017-04-24 17:08 UTC (3+ messages)
` [U-Boot] [PATCH v3 01/19] SPL: FIT: refactor FDT loading
[U-Boot] [PATCH 0/4] MIPS: call debug_uart_init right before board_init_f
2017-04-24 17:03 UTC (18+ messages)
` [U-Boot] [PATCH 1/4] MIPS: QCA AP121: remove debug_uart_init call
` [U-Boot] [PATCH 2/4] MIPS: QCA AP143: "
` [U-Boot] [PATCH 3/4] MIPS: tl-wdr4300: "
` [U-Boot] [PATCH 4/4] MIPS: call debug_uart_init right before board_init_f
[U-Boot] questions about get_ram_size usage in U-Boot = DDR modification during code execution
2017-04-24 16:11 UTC
[U-Boot] [PATCH] armv8: ls2080ardb: Update default sysclk to 100MHz
2017-04-24 15:54 UTC (2+ messages)
[U-Boot] [v2, 00/13] phy: marvell: cp110: varius comphy updates
2017-04-24 15:45 UTC (14+ messages)
` [U-Boot] [v2, 01/13] phy: marvell: Replace PHY_TYPE_KR with PHY_TYPE_SFI
` [U-Boot] [v2, 02/13] phy: marvell: cp110: add support for end point configuration
` [U-Boot] [v2, 03/13] phy: marvell: cp110: update utmi phy connection type
` [U-Boot] [v2, 04/13] phy: marvell: add IGNORE COMPHY type
` [U-Boot] [v2, 05/13] fix: phy: marvell: cp110: fix the KR/SFI line 4 selector
` [U-Boot] [v2, 06/13] fix: phy: marvell: cp110: sata: update analog parameters according to latest ETP
` [U-Boot] [v2, 07/13] fix: phy: marvell: cp110: update comphy selector option
` [U-Boot] [v2, 08/13] phy: marvell: cp110: add 5G XFI mode
` [U-Boot] [v2, 09/13] fix: phy: marvell: cp110: fix comphy lane 4 selection options
` [U-Boot] [v2, 10/13] phy: marvell: print comphy status even when it's disconnected
` [U-Boot] [v2, 11/13] fix: phy: marvell: cp110: sfi: update analog parameters according to latest ETP
` [U-Boot] [v2, 12/13] fix: phy: marvell: cp110: rename comphy_index to cp_index
` [U-Boot] [v2, 13/13] fix: phy: marvell: cp110: pcie: update analog parameters according to latest ETP
[U-Boot] [PATCH 0/6] arm: am335x: Enable SPL_DM
2017-04-24 15:23 UTC (3+ messages)
` [U-Boot] [PATCH 3/6] configs: am335x_evm: Use omap2 generic spl load script
[U-Boot] regression: setting the rpi mac address stopped working
2017-04-24 12:12 UTC (4+ messages)
[U-Boot] [PATCH v2 1/2] rockchip: dts: rk3399: sync with kernel dts
2017-04-24 10:34 UTC (4+ messages)
` [U-Boot] [PATCH v2 2/2] rockchip: dts: add rk3399-firefly dts
[U-Boot] [PATCH v5 00/14] Add support for Broadcom MIPS SoCs
2017-04-24 10:25 UTC (21+ messages)
` [U-Boot] [PATCH v5 01/14] cmd: cpu: fix NULL cpu feature prints
` [U-Boot] [PATCH v5 02/14] sysreset: add syscon-reboot driver
` [U-Boot] [PATCH v5 03/14] MIPS: allow using generic sysreset drivers
` [U-Boot] [PATCH v5 04/14] serial: add serial driver for BCM6345
` [U-Boot] [PATCH v5 05/14] cmd: cpu: refactor to ensure devices are probed and improve code style
` [U-Boot] [PATCH v5 06/14] cpu: add CPU driver for Broadcom MIPS SoCs
` [U-Boot] [PATCH v5 07/14] ram: add RAM "
` [U-Boot] [PATCH v5 08/14] MIPS: add initial infrastructure "
` [U-Boot] [PATCH v5 09/14] MIPS: add support for Broadcom MIPS BCM6358 SoC family
` [U-Boot] [PATCH v5 10/14] MIPS: add BMIPS Huawei HG556a board
` [U-Boot] [PATCH v5 11/14] MIPS: add support for Broadcom MIPS BCM6328 SoC family
` [U-Boot] [PATCH v5 12/14] MIPS: add BMIPS Comtrend AR-5387un board
` [U-Boot] [PATCH v5 13/14] MIPS: add support for Broadcom MIPS BCM63268 SoC family
` [U-Boot] [PATCH v5 14/14] MIPS: add BMIPS Comtrend VR-3032u board
[U-Boot] [PATCH v5 0/7] OMAP: Move SATA to use block driver model and introduce a new framework for PHY management
2017-04-24 9:51 UTC (8+ messages)
` [U-Boot] [PATCH v5 1/7] scsi: dm: split scsi_scan()
` [U-Boot] [PATCH v5 2/7] drivers: phy: add generic PHY framework
` [U-Boot] [PATCH v5 3/7] dm: test: Add tests for the generic PHY uclass
` [U-Boot] [PATCH v5 4/7] drivers: phy: add PIPE3 phy driver
` [U-Boot] [PATCH v5 5/7] dra7: dtsi: mark ocp2scp bus compatible with "simple-bus"
` [U-Boot] [PATCH v5 6/7] drivers: block: dwc_ahci: Implement a driver for Synopsys DWC sata device
` [U-Boot] [PATCH v5 7/7] defconfig: dra7xx_evm: enable CONFIG_BLK and disk driver model for SCSI
[U-Boot] [PATCH v2 00/22] x86: Add ACPI S3 resume support
2017-04-24 9:28 UTC (10+ messages)
` [U-Boot] [PATCH v2 09/22] x86: acpi: Add one API to find OS wakeup vector
` [U-Boot] [PATCH v2 13/22] x86: Do not clear high table area for S3
` [U-Boot] [PATCH v2 19/22] x86: pci: Allow conditionally run VGA rom in S3
` [U-Boot] [PATCH v2 20/22] x86: acpi: Fix Windows S3 resume failure
[U-Boot] [PATCH 0/8] dm: mmc: Tidy up handling of block devices
2017-04-24 8:55 UTC (12+ messages)
` [U-Boot] [PATCH 1/8] dm: mmc: Don't re-init when accessing environment
` [U-Boot] [PATCH 2/8] dm: blk: Allow finding block devices without probing
` [U-Boot] [PATCH 3/8] dm: blk: Add a function to find the next block device number
` [U-Boot] [PATCH 4/8] dm: blk: Improve block device claiming
` [U-Boot] [PATCH 5/8] dm: mmc: Avoid probing block devices in find_mmc_device()
` [U-Boot] [PATCH 6/8] dm: mmc: Check that drivers have operations
` [U-Boot] [PATCH 7/8] dm: mmc: Rewrite mmc_blk_probe()
` [U-Boot] [PATCH 8/8] tegra: Convert MMC to use driver model for operations
[U-Boot] [PATCH] dm: mmc: Don't call board_mmc_power_init() with driver model
2017-04-24 8:11 UTC (2+ messages)
[U-Boot] [PATCH 1/1] add Kconfig for fsuuid command
2017-04-24 8:10 UTC
[U-Boot] [PATCH 0/1] Allow fsuuid command to be built
2017-04-24 8:10 UTC
[U-Boot] [PATCH 1/5 v2] dm: device_remove: Don't return in device_chld_remove() upon error
2017-04-24 7:48 UTC (5+ messages)
` [U-Boot] [PATCH 2/5 v2] serial: serial-uclass: Use force parameter in stdio_deregister_dev()
` [U-Boot] [PATCH 3/5 v2] dm: core: Add DM_FLAG_OS_PREPARE flag
` [U-Boot] [PATCH 4/5 v2] x86: bootm: Add dm_remove_devices_flags() call to bootm_announce_and_cleanup()
` [U-Boot] [PATCH 5/5 v2] spi: ich: Configure SPI BIOS parameters for Linux upon U-Boot exit
[U-Boot] [PATCH 00/11] i2c: Remove old I2C support
2017-04-24 7:22 UTC (14+ messages)
` [U-Boot] [PATCH 01/11] i2c: Drop use of CONFIG_I2C_HARD
` [U-Boot] [PATCH 02/11] i2c: powerpc: Remove use of CONFIG_HARD_I2C
` [U-Boot] [PATCH 03/11] i2c: cm5200: Drop use of CONFIG_I2C_HARD
` [U-Boot] [PATCH 04/11] i2c: pdm360ng: "
` [U-Boot] [PATCH 05/11] i2c: keymile: "
` [U-Boot] [PATCH 06/11] i2c: mxc_i2c: "
` [U-Boot] [PATCH 07/11] i2c: "
` [U-Boot] [PATCH 08/11] i2c: README: Drop CONFIG_SYS_I2C_INIT_MPC5XXX
` [U-Boot] [PATCH 09/11] i2c: Drop CONFIG_SYS_I2C_BOARD_LATE_INIT
` [U-Boot] [PATCH 10/11] Drop CONFIG_I2CFAST
` [U-Boot] [PATCH 11/11] Drop use of CONFIG_I2C_SOFT
[U-Boot] orangepi_pc2: Build error
2017-04-24 6:54 UTC (3+ messages)
[U-Boot] [PATCH] sunxi: Fix arm64 fdtfile variable
2017-04-24 6:26 UTC (3+ messages)
[U-Boot] [PATCH v7 0/3] mmc: meson: add MMC support for Meson GX (S905)
2017-04-24 5:18 UTC (17+ messages)
` [U-Boot] [PATCH v7 2/3] mmc: meson: add MMC driver "
[U-Boot] [PATCH] RFC: patman: Adjust handling of unicode email address
2017-04-24 4:44 UTC (2+ messages)
[U-Boot] [PATCH] rockchip: add defconfig for firefly-rk3399
2017-04-24 3:58 UTC
[U-Boot] [PATCH v1 0/2] DS1307 RTC update
2017-04-24 3:38 UTC (2+ messages)
[U-Boot] [PATCH v4 0/7] OMAP: Move SATA to use block driver model and introduce a new framework for PHY management
2017-04-24 3:38 UTC (11+ messages)
` [U-Boot] [PATCH v4 1/7] scsi: dm: split scsi_scan()
` [U-Boot] [PATCH v4 2/7] drivers: phy: add generic PHY framework
` [U-Boot] [PATCH v4 3/7] dm: test: Add tests for the generic PHY uclass
` [U-Boot] [PATCH v4 5/7] dra7: dtsi: mark ocp2scp bus compatible with "simple-bus"
` [U-Boot] [PATCH v4 7/7] defconfig: dra7xx_evm: enable CONFIG_BLK and disk driver model for SCSI
[U-Boot] arch/arm/lib/crt0_arm_efi.o build errors
2017-04-24 3:38 UTC (3+ messages)
[U-Boot] [PATCH] rockchip: pinctrl: rk3399: add gmac io strength support
2017-04-24 3:38 UTC (2+ messages)
[U-Boot] [PATCH v3] Add 16-bit single register pin controller support
2017-04-24 3:38 UTC (2+ messages)
[U-Boot] [PATCH 00/22] x86: Add ACPI S3 resume support
2017-04-24 3:38 UTC (6+ messages)
` [U-Boot] [PATCH 11/22] x86: acpi: Resume OS if resume vector is found
[U-Boot] [PATCH 1/4] dm: device_remove: Don't return in device_chld_remove() upon error
2017-04-24 3:38 UTC (4+ messages)
[U-Boot] [PATCH v3 00/11] Add mipi dsi display support for rockchip soc
2017-04-24 3:38 UTC (4+ messages)
` [U-Boot] [PATCH v3 08/11] rockchip: board: evb_rk3399: initialize pwm0 for dispaly backlight
[U-Boot] [PATCH v3] rockchip: reserve memory for rk3399 ATF data
2017-04-24 3:38 UTC (2+ messages)
[U-Boot] [PATCH 1/2] arm: change tbu/l type to unsigned int
2017-04-24 3:38 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] asm-generic: global_data: change timebase_l/h "
[U-Boot] [PATCH v3] pinctrl: Kconfig: sort pinctrl config options to prevent future clutter
2017-04-24 3:38 UTC (2+ messages)
[U-Boot] [PATCH v1] env_mmc: configure environment offsets via device tree
2017-04-24 2:55 UTC (2+ messages)
[U-Boot] [PATCH v4 1/4] power: regulator: pwm: support pwm polarity setting
2017-04-24 2:27 UTC (4+ messages)
` [U-Boot] [PATCH v4 2/4] rockchip: pwm: implement pwm_set_invert()
` [U-Boot] [PATCH v4 3/4] doc: dtbinding: add pwm binding file
` [U-Boot] [PATCH v4 4/4] dm: sanbox: pwm: add test for pwm_set_invert()
[U-Boot] [PATCH 1/2] dtoc: Move the output code into its own function
2017-04-24 2:14 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] dtoc: Handle nodes with phandles that depend on the same
[U-Boot] [PATCH 1/1] core/uclass: uclass_get_device_tail: always set devp
2017-04-24 2:12 UTC (11+ messages)
` [U-Boot] [PATCH v2 1/1] core/uclass: iterate over all devices of a uclass
[U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi
2017-04-24 2:11 UTC (3+ messages)
` [U-Boot] [PATCH v6 02/18] dm: mmc: Set up the MMC device when controller is probed
[U-Boot] [PATCH v3 1/3] power: regulator: pwm: support pwm polarity setting
2017-04-24 2:11 UTC (6+ messages)
` [U-Boot] [PATCH v3 2/3] doc: dtbinding: add pwm binding file
` [U-Boot] [PATCH v3 3/3] dm: sanbox: pwm: add test for pwm_set_invert()
[U-Boot] [PATCH v2 1/3] dm: core: Clarify uclass_first/next_device() comments
2017-04-24 2:10 UTC (3+ messages)
` [U-Boot] [PATCH v2 2/3] dm: core: Test uclass_first/next_device() on probe failure
` [U-Boot] [PATCH v2 3/3] dm: core: Add uclass_first/next_device_check()
[U-Boot] Armada 385: PEX detection pulse width
2017-04-23 17:28 UTC (2+ messages)
` [U-Boot] [EXT] "
[U-Boot] [PATCH v2] odroid-c2: Enable distro boot
2017-04-23 10:45 UTC (9+ messages)
` [U-Boot] [U-Boot,v2] "
[U-Boot] [PATCH 1/1] odroid-c2: make fdtfile conform with README.pxe
2017-04-23 10:33 UTC (2+ messages)
[U-Boot] [PATCH 00/13] phy: marvell: cp110: varius comphy updates
2017-04-23 9:17 UTC (14+ messages)
` [U-Boot] [PATCH 01/13] phy: marvell: comphy: Replace PHY_TYPE_KR with PHY_TYPE_SFI
` [U-Boot] [PATCH 02/13] phy: marvell: comphy: cp110: add support for end point configuration
` [U-Boot] [PATCH 03/13] phy: marvell: comphy: cp110: update utmi phy connection type
` [U-Boot] [PATCH 04/13] phy: marvell: comphy: add IGNORE COMPHY type
` [U-Boot] [PATCH 05/13] fix: phy: marvell: comphy: cp110: fix the KR/SFI line 4 selector
` [U-Boot] [PATCH 06/13] fix: phy: marvell: comphy: cp110: sata: update analog parameters according to latest ETP
` [U-Boot] [PATCH 07/13] fix: phy: marvell: comphy: cp110: update comphy selector option
` [U-Boot] [PATCH 08/13] phy: marvell: comphy: cp110: add 5G XFI mode
` [U-Boot] [PATCH 09/13] fix: phy: marvell: comphy: cp110: fix comphy lane 4 selection options
` [U-Boot] [PATCH 10/13] phy: marvell: comphy: print comphy status even when it's disconnected
` [U-Boot] [PATCH 11/13] fix: phy: marvell: cp110: sfi: update analog parameters according to latest ETP
` [U-Boot] [PATCH 12/13] fix: phy: marvell: comphy: cp110: rename comphy_index to cp_index
` [U-Boot] [PATCH 13/13] fix: phy: marvell: comphy: cp110: pcie: update analog parameters according to latest ETP
[U-Boot] [PATCH v4 0/7] am57xx: cl-som-am57x: fix usb
2017-04-23 8:18 UTC (2+ messages)
[U-Boot] [PATCH v1] mmc: sdhci: SDHCI controllers also need power
2017-04-23 1:18 UTC (18+ messages)
[U-Boot] [bug report]dtoc output order for spl dts nodes
2017-04-23 0:44 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox