messages from 2017-05-24 13:01:52 to 2017-05-25 14:41:13 UTC [more...]
[U-Boot] [PATCH] board: ti: am571-idx: Add vcores support
2017-05-25 14:41 UTC (2+ messages)
[U-Boot] [PATCH 00/22] mmc: Add support for HS200 and UHS modes
2017-05-25 14:40 UTC (17+ messages)
` [U-Boot] [PATCH 10/22] mmc: refactor MMC startup to make it easier to support new modes
` [U-Boot] [PATCH 14/22] mmc: add power cyle support in mmc core
` [U-Boot] [PATCH 17/22] mmc: Add a execute_tuning() callback to the mmc operations
` [U-Boot] [PATCH 18/22] mmc: add HS200 support in MMC core
` [U-Boot] [PATCH 20/22] mmc: Add support for UHS modes
` [U-Boot] [PATCH 21/22] mmc: Change mode when switching to a boot partition
[U-Boot] [PATCH] power: pmic: tps65218: Fix tps65218_voltage_update function
2017-05-25 14:34 UTC (4+ messages)
[U-Boot] [PATCH] mmc: Set the initial clock speed to 400KHz
2017-05-25 14:14 UTC (5+ messages)
[U-Boot] [PATCH] nds32: mmc: Support ftsdc010 DM
2017-05-25 14:03 UTC (2+ messages)
[U-Boot] [PATCH] mmc: sdhci-cadence: set timing mode register depending on frequency
2017-05-25 14:01 UTC (3+ messages)
[U-Boot] [PATCH] armv7m: Fix larger builds
2017-05-25 13:58 UTC (4+ messages)
[U-Boot] mmc: meson: increase max block number per request
2017-05-25 13:58 UTC (2+ messages)
[U-Boot] [PATCH v4 1/2] env_mmc: configure environment offsets via device tree
2017-05-25 13:51 UTC (4+ messages)
` [U-Boot] [PATCH v4 2/2] doc: document u-boot, mmc-env-offset and u-boot, mmc-env-offset-redund
[U-Boot] [PATCH 1/5] mmc: sh_sdhi: Fix Kconfig entry
2017-05-25 13:45 UTC (10+ messages)
` [U-Boot] [PATCH 2/5] mmc: sh_sdhi: Set SD_INFOx interrupt mask before command starting
` [U-Boot] [PATCH 3/5] mmc: sh_sdhi: Add 64-bit access to sd_buf support
` [U-Boot] [PATCH 4/5] mmc: sh_sdhi: Add MMC version 5.0 support
` [U-Boot] [PATCH 5/5] mmc: sh_sdhi: Add SDHI support
[U-Boot] [PATCH 1/2] regulator: pfuze100: add SPDX License
2017-05-25 13:38 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] regulator: pfuze100: unsigned compared against 0
[U-Boot] [PATCH V3 1/4] mmc: fsl_esdhc: introduce vs18_enable for 1.8V fix I/O
2017-05-25 13:37 UTC (6+ messages)
` [U-Boot] [PATCH V3 2/4] dm: mmc: fsl_esdhc: handle vqmmc supply
` [U-Boot] [PATCH V3 3/4] imx: warp: use vs18_enable
[U-Boot] [PATCH v6 0/6] Add Intel Arria 10 SoC FPGA driver
2017-05-25 13:35 UTC (5+ messages)
[U-Boot] [PATCH 1/8] Kconfig: Drop CONFIG_EMAC_MDIO_PHY_NUM
2017-05-25 13:17 UTC (5+ messages)
` [U-Boot] [PATCH 6/8] mmc: Change 'part_config' to be a u8 not char
` [U-Boot] [PATCH 7/8] drivers/power/regulator/max77686.c: Fix comparisons of unsigned expressions
[U-Boot] [PATCH 01/33] mmc: select the available type from host_caps and card_caps
2017-05-25 13:08 UTC (9+ messages)
` [U-Boot] [PATCH 06/33] mmc: add card_busy to query card status
[U-Boot] Please pull u-boot-fdt, take 2
2017-05-25 11:19 UTC (2+ messages)
[U-Boot] [PATCH] power: pmic: tps65218: Fix tps65218_voltage_update function
2017-05-25 10:05 UTC
[U-Boot] i.Mx6q u-boot stuck
2017-05-25 8:57 UTC (17+ messages)
[U-Boot] [PATCH V7 0/4] introduce Rockchip rockusb
2017-05-25 8:50 UTC (5+ messages)
` [U-Boot] [PATCH V7 1/4] usb: rockchip: add the rockusb gadget
` [U-Boot] [PATCH V7 2/4] usb: rockchip: add rockusb command
` [U-Boot] [PATCH V7 3/4] rockchip:usb: add a simple readme for rockusb
` [U-Boot] [PATCH V7 4/4] rockchip: rk3288: enable rockusb support on rk3288 based device
[U-Boot] [PATCH V6 0/4] introduce Rockchip rockusb
2017-05-25 8:40 UTC (6+ messages)
` [U-Boot] [PATCH V6 4/4] rockchip: rk3288: enable rockusb support on rk3288 based device
[U-Boot] [PATCH v5] QE: add QE support on SD boot
2017-05-25 1:47 UTC
[U-Boot] Please pull u-boot-dm
2017-05-25 0:19 UTC
[U-Boot] [PATCH v3 00/72] dm: Add support for a 'live' device tree
2017-05-25 0:07 UTC (143+ messages)
` [U-Boot] [PATCH v3 01/72] dm: core: Set return value first in lists_bind_fdt()
` [U-Boot] [PATCH v3 02/72] Update WARN_ON() to return a value
` [U-Boot] [PATCH v3 03/72] dm: core: Add livetree definitions
` [U-Boot] [PATCH v3 04/72] dm: core: Add livetree access functions
` [U-Boot] [PATCH v3 05/72] dm: Add a function to create a 'live' device tree
` [U-Boot] [PATCH v3 06/72] dm: Build a live tree after relocation
` [U-Boot] [PATCH v3 07/72] dm: core: Rename of_device_is_compatible()
` [U-Boot] [PATCH v3 08/72] dm: core: Add operations on device tree references
` [U-Boot] [PATCH v3 09/72] dm: core: Add livetree address functions
` [U-Boot] [PATCH v3 10/72] fdt: Update fdt_get_base_address() to use const
` [U-Boot] [PATCH v3 11/72] dm: core: Add address operations on device tree references
` [U-Boot] [PATCH v3 12/72] dm: core: Add a place to put extra device-tree reading functions
` [U-Boot] [PATCH v3 13/72] dm: core: Add device-based 'read' functions to access DT
` [U-Boot] [PATCH v3 14/72] dm: core: Implement live tree 'read' functions
` [U-Boot] [PATCH v3 15/72] dm: core: Allow binding a device from a live tree
` [U-Boot] [PATCH v3 16/72] dm: core: Update lists_bind_fdt() to use ofnode
` [U-Boot] [PATCH v3 17/72] dm: core: Update device_bind_driver_to_node() "
` [U-Boot] [PATCH v3 18/72] dm: core: Scan the live tree when setting up driver model
` [U-Boot] [PATCH v3 19/72] dm: core: Add a way to find a device by ofnode
` [U-Boot] [PATCH v3 20/72] dm: regmap: Add support for livetree
` [U-Boot] [PATCH v3 21/72] dm: simple-bus: "
` [U-Boot] [PATCH v3 22/72] dm: core: Update uclass_find_device_by_phandle() "
` [U-Boot] [PATCH v3 23/72] sandbox: Add a way to reset sandbox state for tests
` [U-Boot] [PATCH v3 24/72] dm: test: Move test running code into a separate function
` [U-Boot] [PATCH v3 25/72] dm: test: Show the test filename when running
` [U-Boot] [PATCH v3 26/72] dm: test: Add support for running tests with livetree
` [U-Boot] [PATCH v3 27/72] dm: core: Run tests with both livetree and flat tree
` [U-Boot] [PATCH v3 28/72] dm: gpio: Refactor to prepare for live tree support
` [U-Boot] [PATCH v3 29/72] dm: gpio: Drop blank line in gpio_xlate_offs_flags() comment
` [U-Boot] [PATCH v3 30/72] dm: gpio: sandbox: Use dev_read...() functions to access DT
` [U-Boot] [PATCH v3 31/72] dm: gpio: Add live tree support
` [U-Boot] [PATCH v3 32/72] cros_ec: Fix debug() statement in ec_command_inptr()
` [U-Boot] [PATCH v3 33/72] cros_ec: Convert to support live tree
` [U-Boot] [PATCH v3 34/72] sandbox: Add a new sandbox_flattree board
` [U-Boot] [PATCH v3 35/72] test: Update 'make test' to run more tests
` [U-Boot] [PATCH v3 36/72] fdt: Rename a few functions in fdt_support
` [U-Boot] [PATCH v3 37/72] dm: Add more livetree helpers and definitions
` [U-Boot] [PATCH v3 38/72] string: Add strchrnul()
` [U-Boot] [PATCH v3 39/72] string: Add strcspn()
` [U-Boot] [PATCH v3 40/72] dm: i2c: Convert uclass to livetree
` [U-Boot] [PATCH v3 41/72] samsung: Move pmic header out of config file
` [U-Boot] [PATCH v3 42/72] dm: pmic: Convert uclass to livetree
` [U-Boot] [PATCH v3 43/72] sandbox: pmic: Convert pmic emulator to support livetree
` [U-Boot] [PATCH v3 44/72] dm: regulator: Convert regulator uclass "
` [U-Boot] [PATCH v3 45/72] dm: regulator: Update fixed regulator "
` [U-Boot] [PATCH v3 46/72] dm: mmc: Convert uclass to livetree
` [U-Boot] [PATCH v3 47/72] dm: adc: "
` [U-Boot] [PATCH v3 48/72] dm: usb: "
` [U-Boot] [PATCH v3 49/72] sandbox: usb: Convert emulators "
` [U-Boot] [PATCH v3 50/72] clk: Modify xlate() method for livetree
` [U-Boot] [PATCH v3 51/72] dm: clk: Update uclass to support livetree
` [U-Boot] [PATCH v3 52/72] dm: clk: fixed: Update "
` [U-Boot] [PATCH v3 53/72] dm: test: Separate out the bus DT offset test
` [U-Boot] [PATCH v3 54/72] dm: test: Disable the fdt_offset test with livetree
` [U-Boot] [PATCH v3 55/72] dm: phy: Update tests to use ut_asserteq()
` [U-Boot] [PATCH v3 56/72] dm: mailbox: Update uclass to support livetree
` [U-Boot] [PATCH v3 57/72] dm: phy: "
` [U-Boot] [PATCH v3 58/72] sandbox: phy: Update driver for livetree
` [U-Boot] [PATCH v3 59/72] dm: power-domain: Update uclass to support livetree
` [U-Boot] [PATCH v3 60/72] dm: reset: "
` [U-Boot] [PATCH v3 61/72] dm: pci: "
` [U-Boot] [PATCH v3 62/72] dm: Update the I2C eeprom driver for livetree
` [U-Boot] [PATCH v3 63/72] cros_ec: Update the cros_ec keyboard driver to livetree
` [U-Boot] [PATCH v3 64/72] dm: spi: Convert uclass "
` [U-Boot] [PATCH v3 65/72] dm: sandbox: i2c: Drop fdtdec.h header
` [U-Boot] [PATCH v3 66/72] dm: sandbox: i2c_rtc: "
` [U-Boot] [PATCH v3 67/72] dm: spi-flash: Convert uclass to livetree
` [U-Boot] [PATCH v3 68/72] dm: sandbox: spi: Convert driver to support livetree
` [U-Boot] [PATCH v3 69/72] dm: sandbox: sysreset: Convert driver to livetree
` [U-Boot] [PATCH v3 70/72] dm: test: Fix nit with position of backslash
` [U-Boot] [PATCH v3 72/72] sandbox: Move to use live tree
[U-Boot] gcc-6 cross toolchain
2017-05-24 22:21 UTC (2+ messages)
[U-Boot] [PATCH] scripts/Makefile.lib: Only apply u-boot.dtsi files in the target directory
2017-05-24 18:17 UTC (2+ messages)
[U-Boot] [PATCH v3 1/2] drivers: net: fsl-mc: Link MC boot to PHY_RESET_R
2017-05-24 16:40 UTC (2+ messages)
` [U-Boot] [PATCH v3 2/2] drivers: net: fsl-mc: Include MAC addr fixup to DPL
[U-Boot] [PATCH v3 00/30] ARM: k2g: Add support for new K2G ICE EVM
2017-05-24 15:43 UTC (31+ messages)
` [U-Boot] [PATCH v3 01/30] ti: common: board_detect: Allow settings board detection variables manually
` [U-Boot] [PATCH v3 02/30] spl: fit: Break out some functions into a common file
` [U-Boot] [PATCH v3 03/30] boot_fit: Create helper functions that can be used to select DTB out of FIT
` [U-Boot] [PATCH v3 04/30] fdt: Enable selecting correct DTB from appended FIT Image
` [U-Boot] [PATCH v3 05/30] ti: common: board_detect: Add function to determine if EEPROM was read
` [U-Boot] [PATCH v3 06/30] dts: Allow OF_LIST to depend on FIT_EMBED
` [U-Boot] [PATCH v3 07/30] ARM: dts: k2g: Introduce U-boot specific dtsi file
` [U-Boot] [PATCH v3 08/30] arm: dts: Add new "generic" 66AK2Gx device tree file
` [U-Boot] [PATCH v3 09/30] board_f: Add new function to allow runtime DTB selection
` [U-Boot] [PATCH v3 10/30] Makefile: Build additional binaries for dtb FIT blobs appended to U-boot
` [U-Boot] [PATCH v3 11/30] ARM: keystone2: Allow to build with all image formats
` [U-Boot] [PATCH v3 12/30] ARM: k2g: Define embedded_dtb_select for runtime DTB selection in U-boot
` [U-Boot] [PATCH v3 13/30] ARM: keystone2: Define board_fit_config_name_match for Keystone 2 boards
` [U-Boot] [PATCH v3 14/30] ks2_evm: Add EEPROM based board detection
` [U-Boot] [PATCH v3 15/30] defconfig: keystone2: Enable U-boot runtime DTB detection
` [U-Boot] [PATCH v3 16/30] ARM: keystone2: Add additional fields used for DDR3 configuration
` [U-Boot] [PATCH v3 17/30] ARM: k2g: Program DDR PHY MR2 register with the default value
` [U-Boot] [PATCH v3 18/30] ARM: k2g: Program DDRPHY_DATX8 registers via mask and value variables
` [U-Boot] [PATCH v3 19/30] ks2_evm: Add EEPROM based board detection helper functions
` [U-Boot] [PATCH v3 20/30] ARM: k2g: Add pinmux support for K2G ICE evm
` [U-Boot] [PATCH v3 21/30] ARM: k2g: Add DDR3 configuration "
` [U-Boot] [PATCH v3 22/30] board: ks2: Use board detection to wrap code not specific to "
` [U-Boot] [PATCH v3 23/30] ARM: k2g: Use board detection to wrap K2G GP specific calls
` [U-Boot] [PATCH v3 24/30] ARM: k2g: Update board_name u-boot env variable at runtime
` [U-Boot] [PATCH v3 25/30] ARM: dts: keystone-k2g: Remove skeleton.dtsi
` [U-Boot] [PATCH v3 26/30] ARM: dts: keystone-k2g-evm: Add unit address to memory node
` [U-Boot] [PATCH v3 27/30] ARM: dts: k2g: Disable netcp by default
` [U-Boot] [PATCH v3 28/30] ARM: dts: k2g: Add DT support for K2G Industrial Communication Engine evm
` [U-Boot] [PATCH v3 29/30] ARM: k2g: Add K2G ICE DTB to the list of possible DTBs
` [U-Boot] [PATCH v3 30/30] defconfig: k2g_evm_defconfig: Add K2G ICE to OF_LIST
[U-Boot] [PATCH v2 00/30] ARM: k2g: Add support for new K2G ICE EVM
2017-05-24 15:38 UTC (3+ messages)
` [U-Boot] [PATCH v2 09/30] board_f: Add new function to allow runtime DTB selection
[U-Boot] [PATCH v2 0/4] sunxi: video: Add support for TV (composite) output on H3/H5
2017-05-24 15:34 UTC (4+ messages)
` [U-Boot] [PATCH v2 4/4] sunxi: video: Add H3/H5 TV out driver
[U-Boot] [PATCH v4] QE: add QE support on SD boot
2017-05-24 15:23 UTC (2+ messages)
[U-Boot] [PATCH] Add support for Microchip LAN75xx and LAN78xx
2017-05-24 15:14 UTC (4+ messages)
[U-Boot] [PATCH v3 0/4] Extend xhci-dwc3
2017-05-24 15:08 UTC (4+ messages)
` [U-Boot] [PATCH v3 3/4] drivers: phy: add generic_phy_valid() method
[U-Boot] [PATCH] arm: sunxi: initial support for NanoPi Neo2
2017-05-24 14:27 UTC (4+ messages)
[U-Boot] [RESEND PATCH] dfu: dfu_sf: Fix read offset
2017-05-24 14:09 UTC
[U-Boot] [PATCH] net: phy: marvell 88e151x: Fix handling of RGMII interface types
2017-05-24 13:43 UTC
[U-Boot] [PATCH v4 00/11] usb: Extend ehci and ohci generic drivers
2017-05-24 13:07 UTC (12+ messages)
` [U-Boot] [PATCH v4 01/11] reset: add reset_request()
` [U-Boot] [PATCH v4 02/11] reset: add reset_count()
` [U-Boot] [PATCH v4 03/11] reset: add reset_assert_all()
` [U-Boot] [PATCH v4 04/11] clk: add clk_count()
` [U-Boot] [PATCH v4 05/11] clk: add clk_disable_all()
` [U-Boot] [PATCH v4 06/11] usb: host: ehci-generic: replace printf() by error()
` [U-Boot] [PATCH v4 07/11] usb: host: ehci-generic: add error path and .remove callback
` [U-Boot] [PATCH v4 08/11] usb: host: ehci-generic: add generic PHY support
` [U-Boot] [PATCH v4 09/11] usb: host: ohci-generic: add CLOCK support
` [U-Boot] [PATCH v4 10/11] usb: host: ohci-generic: add RESET support
` [U-Boot] [PATCH v4 11/11] usb: host: ohci-generic: add generic PHY support
[U-Boot] [PATCH v4 00/11] usb: Extend ehci and ohci generic drivers
2017-05-24 13:04 UTC (8+ messages)
` [U-Boot] [PATCH v4 06/11] usb: host: ehci-generic: replace printf() by error()
` [U-Boot] [PATCH v4 07/11] usb: host: ehci-generic: add error path and .remove callback
` [U-Boot] [PATCH v4 08/11] usb: host: ehci-generic: add generic PHY support
` [U-Boot] [PATCH v4 09/11] usb: host: ohci-generic: add CLOCK support
` [U-Boot] [PATCH v4 10/11] usb: host: ohci-generic: add RESET support
` [U-Boot] [PATCH v4 11/11] usb: host: ohci-generic: add generic PHY support
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox