messages from 2018-01-07 05:38:43 to 2018-01-09 08:09:49 UTC [more...]
[U-Boot] [PATCH 01/07] db410c: configs: increase gunzip buffer size for the kernel
2018-01-09 8:09 UTC (8+ messages)
` [U-Boot] [PATCH 02/07] db410c: update wlan and bt mac addresses from firmware
` [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
[U-Boot] [PATCH 01/05] env: enable accessing the environment in an EXT4 partition
2018-01-09 8:07 UTC (6+ messages)
` [U-Boot] [PATCH 03/05] db820c: add qualcomm dragonboard 820C support
` [U-Boot] [PATCH 05/05] db820c: stop autoboot when vol- pressed
[U-Boot] [PATCH 0/6] am335x-fb: support display PLL for lcd-clock / pixel-clock
2018-01-09 8:04 UTC (10+ messages)
` [U-Boot] [PATCH 1/6] mach-omap2: add AM335x Display PLL register definition
` [U-Boot] [PATCH 2/6] am335x-fb: cosmetic: update-copyright
` [U-Boot] [PATCH 3/6] am335x-fb: cosmetic: fix coding style
` [U-Boot] [PATCH 4/6] am335x-fb: setup display PLL
` [U-Boot] [PATCH 5/6] board/BuR: provide real clock-frequency instead a divider
` [U-Boot] [PATCH 6/6] board/BuR: drop LCDC clock manipulation from board code
[U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed
2018-01-09 6:42 UTC (11+ messages)
[U-Boot] [PATCH] ARM: zynq: remove unused CONFIG_ZC770_XM01* options
2018-01-09 6:22 UTC (2+ messages)
[U-Boot] [PATCH] arm: zynq: Remove ZC770_ config option
2018-01-09 6:21 UTC (3+ messages)
[U-Boot] [PATCH 3/3] spi: cadence_qspi_apb: Make flash writes 32 bit aligned
2018-01-09 6:01 UTC
[U-Boot] [PATCH] LS2088ARDB: Fix NOR fall back option failure
2018-01-09 6:01 UTC
[U-Boot] [PATCH 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
2018-01-09 5:57 UTC
[U-Boot] [PATCH v2 00/12] Add NX25 to support RISC-V
2018-01-09 5:47 UTC (3+ messages)
` [U-Boot] [PATCH v2 01/12] riscv: cpu: Add nx25 "
[U-Boot] [PATCH v6 0/2] Generic firmware loader
2018-01-09 5:26 UTC (4+ messages)
[U-Boot] u-boot/next and HS MMC patches
2018-01-09 4:33 UTC (2+ messages)
[U-Boot] RFE : CONFIG_OF_LIBFDT_OVERLAY=y in configs/orangepi_one_defconfig
2018-01-09 2:34 UTC (2+ messages)
[U-Boot] [PATCH v1 1/2] x86: tangier: Use actual GPIO hardware numbers
2018-01-09 1:51 UTC (8+ messages)
` [U-Boot] [PATCH v1 2/2] x86: tangier: Add Bluetooth to ACPI table
[U-Boot] [PATCH v2] x86: Move commands from under arch/x86 to cmd/x86/
2018-01-09 1:51 UTC (3+ messages)
[U-Boot] [PATCH 1/1] configs: x86: allow to override CONFIG_BOOTCOMMAND
2018-01-09 1:48 UTC (6+ messages)
[U-Boot] [ANN] U-Boot v2018.01 is released
2018-01-09 1:28 UTC
[U-Boot] [PATCH 1/2] ARM: Tegra186: calculate load addresses at boot
2018-01-09 0:41 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] ARM: Tegra: p2771-0000: use calculcate env var feature
[U-Boot] [PATCH v3 1/1] vsprintf.c: add EFI device path printing
2018-01-08 23:44 UTC (5+ messages)
[U-Boot] [PATCH 00/16] efi_loader: implement driver management
2018-01-08 23:21 UTC (35+ messages)
` [U-Boot] [PATCH 01/16] efi_selftest: colored test output
` [U-Boot] [PATCH 02/16] efi_loader: simplify efi_remove_all_protocols
` [U-Boot] [PATCH 03/16] efi_selftest: do not try to close device path protocol
` [U-Boot] [PATCH 04/16] efi_loader: list of open protocol infos
` [U-Boot] [PATCH 05/16] efi_loader: open_info in OpenProtocol
` [U-Boot] [PATCH 06/16] efi_loader: open_info in CloseProtocol
` [U-Boot] [PATCH 07/16] efi_loader: implement OpenProtocolInformation
` [U-Boot] [PATCH 08/16] efi_loader: debug output installed device path
` [U-Boot] [PATCH 09/16] efi_loader: implement ConnectController
` [U-Boot] [PATCH 10/16] efi_loader: fix signature of efi_disconnect_controller
` [U-Boot] [PATCH 11/16] efi_loader: implement DisconnectController
` [U-Boot] [PATCH 12/16] efi_loader: disconnect controllers in UninstallProtocol
` [U-Boot] [PATCH 13/16] efi_selftest: remove todo in manage protocols
` [U-Boot] [PATCH 14/16] efi_selftest: remove todo in device path test
` [U-Boot] [PATCH 15/16] efi_selftest: test for (Dis)ConnectController
` [U-Boot] [PATCH 16/16] efi_loader: consistently use efi_handle_t for handles
[U-Boot] [PATCH 1/2] cmd: go: Make do_go available to outside boot.c
2018-01-08 22:11 UTC (8+ messages)
` [U-Boot] [PATCH 2/2] sysboot: Call bootm booti bootz then go on label_boot
[U-Boot] [PATCH 1/4] ARM: tegra: don't use CONFIG_SPL_TEXT_BASE when no SPL
2018-01-08 22:11 UTC (9+ messages)
` [U-Boot] [PATCH 2/4] ARM: tegra: remove SPL config for non-SPL SoCs
` [U-Boot] [PATCH 3/4] ARMv8: Allow dynamic early stack pointer
` [U-Boot] [PATCH 4/4] ARM: tegra: use CONFIG_SYS_INIT_SP_BSS_OFFSET
[U-Boot] [PULL] Please pull u-boot-imx
2018-01-08 21:26 UTC (5+ messages)
[U-Boot] [PATCH v3] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE
2018-01-08 19:57 UTC
[U-Boot] [PATCH 1/3] armv8/kconfig: Align boards of same family at one place
2018-01-08 19:39 UTC (5+ messages)
` [U-Boot] [PATCH v3 2/3] board: freescale: ls1012a: LS1012A-2G5RDB board support
` [U-Boot] [PATCH 3/3] drivers: net: pfe_eth: Disable autonegotiation for 2.5G SGMII
[U-Boot] [PATCH v2 1/2] env: sf: Add support for env init for QSPI-NOR
2018-01-08 18:23 UTC (2+ messages)
[U-Boot] [PATCH 1/2] ARMv8: add optional Linux kernel image header
2018-01-08 18:23 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] ARM: tegra: use LINUX_KERNEL_IMAGE_HEADER
[U-Boot] [PATCH] freescale: vid: add support LTC3882 and rework of the VID support
2018-01-08 18:10 UTC (2+ messages)
[U-Boot] [PATCH v2 00/13] driver model bring-up of dwc3 usb peripheral
2018-01-08 17:57 UTC (11+ messages)
` [U-Boot] [PATCH v2 06/13] drivers: usb: dwc3: add ti dwc3 peripheral driver with driver model support
[U-Boot] [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig
2018-01-08 17:44 UTC (4+ messages)
` [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
[U-Boot] [PATCH v5 00/24] Fix and extend i.MX HAB layer
2018-01-08 17:36 UTC (25+ messages)
` [U-Boot] [PATCH v5 01/24] arm: imx: hab: Make authenticate_image return int
` [U-Boot] [PATCH v5 02/24] arm: imx: hab: Fix authenticate_image result code
` [U-Boot] [PATCH v5 03/24] arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail
` [U-Boot] [PATCH v5 04/24] arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail
` [U-Boot] [PATCH v5 05/24] arm: imx: hab: Move IVT_SIZE to hab.h
` [U-Boot] [PATCH v5 06/24] arm: imx: hab: Move CSF_PAD_SIZE "
` [U-Boot] [PATCH v5 07/24] arm: imx: hab: Fix authenticate_image input parameters
` [U-Boot] [PATCH v5 08/24] arm: imx: hab: Add IVT header definitions
` [U-Boot] [PATCH v5 09/24] arm: imx: hab: Add IVT header verification
` [U-Boot] [PATCH v5 10/24] arm: imx: hab: Verify IVT self matches calculated address
` [U-Boot] [PATCH v5 11/24] arm: imx: hab: Only call ROM once headers are verified
` [U-Boot] [PATCH v5 12/24] arm: imx: hab: Print CSF based on IVT descriptor
` [U-Boot] [PATCH v5 13/24] arm: imx: hab: Print additional IVT elements during debug
` [U-Boot] [PATCH v5 14/24] arm: imx: hab: Define rvt_check_target()
` [U-Boot] [PATCH v5 15/24] arm: imx: hab: Implement hab_rvt_check_target
` [U-Boot] [PATCH v5 16/24] arm: imx: hab: Add a hab_rvt_check_target to image auth
` [U-Boot] [PATCH v5 17/24] arm: imx: hab: Print HAB event log only after calling ROM
` [U-Boot] [PATCH v5 18/24] arm: imx: hab: Make internal functions and data static
` [U-Boot] [PATCH v5 19/24] arm: imx: hab: Prefix authenticate_image with imx_hab
` [U-Boot] [PATCH v5 20/24] arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled
` [U-Boot] [PATCH v5 21/24] arm: imx: hab: Make imx_hab_is_enabled global
` [U-Boot] [PATCH v5 22/24] arm: imx: hab: Define rvt_failsafe()
` [U-Boot] [PATCH v5 23/24] arm: imx: hab: Implement hab_rvt_failsafe
` [U-Boot] [PATCH v5 24/24] arm: imx: hab: Add hab_failsafe console command
[U-Boot] Making lack-of DM conversion noisy warning
2018-01-08 16:35 UTC (2+ messages)
[U-Boot] Please pull u-boot-x86
2018-01-08 16:19 UTC (2+ messages)
[U-Boot] [PATCH v3] crypto/fsl: fix BLOB encapsulation and decapsulation
2018-01-08 16:19 UTC (4+ messages)
[U-Boot] [PATCH v2 16/18] clk: rockchip: Add rk322x gamc clock support
2018-01-08 15:12 UTC (4+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH 4/4] serial: ns16550: use 13x oversampling when available
2018-01-08 12:51 UTC
[U-Boot] [PATCH 3/4] serial: ns16550: add definitions for register mdr1
2018-01-08 12:51 UTC
[U-Boot] [PATCH 2/4] serial: ns16550: centralize identification of uart variants
2018-01-08 12:51 UTC
[U-Boot] [PATCH 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like
2018-01-08 12:50 UTC
[U-Boot] [PATCH 0/4] serial: ns16550: cleanups and 13x oversampling
2018-01-08 12:50 UTC
[U-Boot] [BUG] x86: incorrect dram definition in dram_init_banksize()
2018-01-08 12:07 UTC (3+ messages)
[U-Boot] [PATCH v3] mx6ull: Handle the CONFIG_MX6ULL cases correctly
2018-01-08 11:38 UTC (4+ messages)
[U-Boot] [PATCH 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
2018-01-08 11:18 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"
` [U-Boot] [PATCH 2/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect write "
` [U-Boot] [PATCH 3/3] spi: cadence_qspi_apb: Make flash writes 32 bit aligned
[U-Boot] "Reset" values for clksel_con registers in clk_rk3399.c:rkclk_init()
2018-01-08 10:01 UTC (2+ messages)
[U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
2018-01-08 9:17 UTC
[U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported
2018-01-08 9:06 UTC (5+ messages)
` [U-Boot] [PATCH 6/6] sunxi: Add initial Banana-Pi Zero support
[U-Boot] [PATCH] board/ls2081ardb: Update board related prints
2018-01-08 7:29 UTC
[U-Boot] "fdt" commands in extlinux.conf ?
2018-01-08 6:56 UTC (3+ messages)
[U-Boot] [PATCH] board/ls2081ard: Correct code to get QMAP value in checkboard
2018-01-08 6:50 UTC
[U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
2018-01-08 5:27 UTC (8+ messages)
[U-Boot] [PATCH 1/1] board_r: remove superfluous #ifdef CONFIG_PRAM
2018-01-08 4:52 UTC (2+ messages)
[U-Boot] [PATCH] ARM: bootm: don't assume sp is in DRAM bank 0
2018-01-08 4:52 UTC (2+ messages)
[U-Boot] [PATCH] config_whitelist: remove false-positive CONFIG options
2018-01-08 4:52 UTC (2+ messages)
[U-Boot] [PATCH 00/14] env: Multiple env support and env transition for sunxi
2018-01-08 4:52 UTC (5+ messages)
` [U-Boot] [PATCH 12/14] env: Mark env_get_location as weak
[U-Boot] [PATCH] dm: pinctrl: sync with Linux to use pin_config_param
2018-01-08 4:52 UTC (2+ messages)
[U-Boot] [PATCH 1/3] ARM: Tegra186: mem parsing fixes from downstream
2018-01-08 4:51 UTC (6+ messages)
` [U-Boot] [PATCH 2/3] ARM: Tegra186: search for best RAM bank
` [U-Boot] [PATCH 3/3] ARM: tegra: p2771-000: increase max DRAM bank count
[U-Boot] [PATCH 00/11] Introduce variables whitelisting in environment
2018-01-08 4:50 UTC (4+ messages)
[U-Boot] [PATCH] GPIO: pca953x: Rework to not include commands in SPL
2018-01-08 4:50 UTC (2+ messages)
[U-Boot] [PATCH 0/8] mmc: some fixes for core and add HS200 support for sdhci-cadence
2018-01-08 4:38 UTC (4+ messages)
` [U-Boot] [PATCH 1/8] dm: add dev_read_u32()
[U-Boot] [PATCH 0/9] spl: Add full fit and u-boot dto support
2018-01-08 4:37 UTC (18+ messages)
` [U-Boot] [PATCH 1/9] fit: Fix CONFIG_FIT_SPL_PRINT
` [U-Boot] [PATCH 2/9] fit: Add empty fit_print_contents() and fit_image_print()
` [U-Boot] [PATCH 3/9] fit: Add standalone image type handling
` [U-Boot] [PATCH 4/9] fit: Verify all configuration signatures
` [U-Boot] [PATCH 5/9] spl: Add full fitImage support
` [U-Boot] [PATCH 6/9] spl: Add support for overlaying U-Boot DT
` [U-Boot] [PATCH 8/9] spl: ram: Add support for fetching image position from control DT
` [U-Boot] [PATCH 9/9] spl: spi: "
[U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface
2018-01-08 3:52 UTC (3+ messages)
` [U-Boot] [PATCH v10 23/27] board_r: initialize spi_nor
[U-Boot] [PATCH] ARM: mvebu: correct reference for "ethernet1" on DB-88F6820-AMC
2018-01-08 3:17 UTC
[U-Boot] [PATCH 1/1] efi_loader: allocate correct memory type for EFI image
2018-01-07 23:07 UTC
[U-Boot] [PATCH v5 00/10] mips: bmips: add SPI support
2018-01-07 18:14 UTC (20+ messages)
` [U-Boot] [PATCH v6 00/11] "
` [U-Boot] [PATCH v6 01/11] wait_bit: add big endian version of wait_for_bit function
` [U-Boot] [PATCH v6 04/11] dm: spi: add BCM63xx SPI driver
` [U-Boot] [PATCH v6 05/11] mips: bmips: add bcm63xx-spi driver support for BCM6338
` [U-Boot] [PATCH v6 06/11] mips: bmips: add bcm63xx-spi driver support for BCM6348
` [U-Boot] [PATCH v6 07/11] mips: bmips: add bcm63xx-spi driver support for BCM6358
` [U-Boot] [PATCH v6 08/11] mips: bmips: add bcm63xx-spi driver support for BCM3380
` [U-Boot] [PATCH v6 09/11] mips: bmips: add bcm63xx-spi driver support for BCM63268
` [U-Boot] [PATCH v6 10/11] mips: bmips: enable the SPI flash on the Sagem F@ST1704
` [U-Boot] [PATCH v6 11/11] mips: bmips: enable the SPI flash on the Netgear CG3100D
[U-Boot] [PATCH] rpi_0_w: Add configs consistent with RpI3
2018-01-07 16:48 UTC
[U-Boot] [PATCH v5 0/5] spi: cadence_spi: Adopt Linux DT bindings
2018-01-07 11:41 UTC (2+ messages)
[U-Boot] [PATCH V3 1/3] mx7_common: use psci 1.0 instead of 0.1
2018-01-07 6:34 UTC (3+ messages)
` [U-Boot] [PATCH V3 2/3] imx: mx7: psci: add system reset support
` [U-Boot] [PATCH V3 3/3] imx: mx7: psci: add system power off support
[U-Boot] [PATCH V2] imx: mx7: psci: add system reset support
2018-01-07 6:27 UTC (6+ messages)
[U-Boot] [PATCH V2 1/3] mx7_common: use psci 1.0 instead of 0.1
2018-01-07 5:38 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox