messages from 2018-01-17 01:26:06 to 2018-01-18 13:45:30 UTC [more...]
[U-Boot] Please pull u-boot-fsl-qoriq master
2018-01-18 13:45 UTC (2+ messages)
[U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images
2018-01-18 13:40 UTC (4+ messages)
[U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11
2018-01-18 13:23 UTC (11+ messages)
` [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
[U-Boot] [PATCH v6 0/2] Generic firmware loader
2018-01-18 13:18 UTC (11+ messages)
` [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
` [U-Boot] [U-Boot, v6, "
[U-Boot] [PATCH v2 0/3] STM32: Remove STMMAC clock setup from board
2018-01-18 13:10 UTC (4+ messages)
` [U-Boot] [PATCH v2 1/3] ARM: dts: stm32: Add STMMAC clocks for stm32f746
` [U-Boot] [PATCH v2 2/3] clk: clk_stm32f: Remove STMMAC clock setup
` [U-Boot] [PATCH v2 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()
[U-Boot] [PATCH 0/6] Add stmf429-evaluation board support
2018-01-18 12:39 UTC (7+ messages)
` [U-Boot] [PATCH 1/6] ARM: dts: stm32: add "u-boot, dm-pre-reloc" for clk_hse in stm32f7-u-boot
` [U-Boot] [PATCH 2/6] clk: stm32: retrieve external oscillator frequency from DT
` [U-Boot] [PATCH 3/6] configs: stm32f: Remove STM32_HSE_HZ for all STM32F series
` [U-Boot] [PATCH 4/6] board: stm32: Add stm32f429-evaluation board support
` [U-Boot] [PATCH 5/6] ARM: dts: stm32: Add STM32F429 Evaluation "
` [U-Boot] [PATCH 6/6] ARM: dts: stm32: add stm32429-eval-u-boot dts file
[U-Boot] [PATCH v4 07/11] spl: add support to booting with OP-TEE
2018-01-18 11:21 UTC (8+ messages)
` [U-Boot] [U-Boot, v4, "
[U-Boot] UDP packet sender
2018-01-18 10:56 UTC
[U-Boot] [PATCH v2 0/2] efi_loader: correctly call images
2018-01-18 10:05 UTC (8+ messages)
` [U-Boot] [PATCH v2 1/2] "
` [U-Boot] [PATCH v2 2/2] efi_selftest: test start image
[U-Boot] [PATCH v2 00/18] efi_loader: enable EFI driver provided block device
2018-01-18 9:52 UTC (20+ messages)
` [U-Boot] [PATCH v2 01/18] efi_loader: return NULL from device path functions
` [U-Boot] [PATCH v2 02/18] efi_loader: address of the simple file system protocol
` [U-Boot] [PATCH v2 03/18] efi_loader: correct find "
` [U-Boot] [PATCH v2 04/18] efi_loader: print device path when entering efi_load_image
` [U-Boot] [PATCH v2 05/18] efi_loader: allocate correct memory type for EFI image
` [U-Boot] [PATCH v2 06/18] efi_loader: check tables in helloworld.efi
` [U-Boot] [PATCH v2 07/18] efi_loader: fix StartImage bootservice
` [U-Boot] [PATCH v2 08/18] efi_loader: efi_disk_register: correctly determine if_type_name
` [U-Boot] [PATCH v2 09/18] efi_loader: make efi_block_io_guid a global symbol
` [U-Boot] [PATCH v2 10/18] efi_loader: provide a function to create a partition node
` [U-Boot] [PATCH v2 11/18] efi_loader: make efi_disk_create_partitions a global symbol
` [U-Boot] [PATCH v2 12/18] efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitions
` [U-Boot] [PATCH v2 13/18] efi_loader: provide function to get last node of a device path
` [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles
` [U-Boot] [PATCH v2 15/18] tools: provide a tool to convert a binary file to an include
` [U-Boot] [PATCH v2 16/18] efi_driver: EFI block driver
` [U-Boot] [PATCH v2 17/18] efi_selftest: provide a test for block io
` [U-Boot] [PATCH v2 18/18] efi_loader: fix ExitBootServices
[U-Boot] mmc1 not working on Samsung snow chromebook
2018-01-18 9:05 UTC (7+ messages)
[U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
2018-01-18 8:58 UTC (14+ messages)
` [U-Boot] [PATCH V5 29/31] power: pmic/regulator allow dm be omitted by SPL
[U-Boot] [PATCH] mmc: fix the wrong dislabing clock
2018-01-18 8:55 UTC (4+ messages)
[U-Boot] [PATCH] arm64: zynqmp: Add identification string to ep108
2018-01-18 8:49 UTC
[U-Boot] [PATCH] arm64: zynqmp: Enable gem on zc1751-dc5
2018-01-18 8:48 UTC
[U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz
2018-01-18 8:43 UTC (4+ messages)
[U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time
2018-01-18 8:15 UTC (2+ messages)
[U-Boot] [PATCH v2] ubi: Ensure no fastmap flush after uif_close
2018-01-18 8:07 UTC
[U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
2018-01-18 7:47 UTC (8+ messages)
[U-Boot] [PATCH 0/3] STM32: Remove STMMAC clock setup from board
2018-01-18 7:47 UTC (8+ messages)
` [U-Boot] [PATCH 1/3] ARM: dts: stm32: Add STMMAC clocks for stm32f746
` [U-Boot] [PATCH 2/3] clk: clk_stm32f: Remove STMMAC clock setup
` [U-Boot] [PATCH 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()
[U-Boot] X86 Broadwell-DE override FSP configuration
2018-01-18 6:45 UTC (3+ messages)
[U-Boot] [PATCH v2 0/2] Rpi: Add support for second sd host controller
2018-01-18 4:41 UTC (4+ messages)
` [U-Boot] [PATCH v2 1/2] bcm283x: Add pinctrl driver
` [U-Boot] [PATCH v2 2/2] mmc: Add bcm2835 sdhost controller
[U-Boot] [PATCH v2 0/4] ddr: marvell: update DDR driver
2018-01-18 4:16 UTC (5+ messages)
` [U-Boot] [PATCH v2 1/4] ddr: marvell: only assert M_ODT[0] on write for a single CS
` [U-Boot] [PATCH v2 2/4] ddr: marvell: use correct TREFI value
` [U-Boot] [PATCH v2 3/4] ddr: marvell: update additional ODT setting
` [U-Boot] [PATCH v2 4/4] ddr: marvell: update ddr controller init and freq
[U-Boot] [PATCH v2 1/1] dm: video: Correct color ANSI escape sequence support
2018-01-18 2:42 UTC
[U-Boot] [PATCH v2 0/7] RPi: Properly handle dynamic serial configuration
2018-01-17 23:18 UTC (22+ messages)
` [U-Boot] [PATCH v2 1/7] serial: Use next serial device if probing fails
` [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable
` [U-Boot] [PATCH v2 3/7] rpi: Remove runtime disabling support for serial
` [U-Boot] [PATCH v2 4/7] serial: bcm283x_mu: Remove support for post-init disabling
` [U-Boot] [PATCH v2 5/7] rpi: Properly detect which serial device is active
` [U-Boot] [PATCH v2 6/7] rpi: Determine PL011/Mini-UART availability at runtime
` [U-Boot] [PATCH v2 7/7] rpi: Force skip_init on serial devices
[U-Boot] x86: 64-bit U-boot image compilation errors
2018-01-17 23:03 UTC
[U-Boot] [PATCH v2 00/15] env: Multiple env support and env transition for sunxi
2018-01-17 22:07 UTC (19+ messages)
` [U-Boot] [PATCH v2 03/15] env: Pass additional parameters to the env lookup function
` [U-Boot] [PATCH v2 06/15] env: fat: Make the debug messages play a little nicer
` [U-Boot] [PATCH v2 07/15] env: mmc: "
` [U-Boot] [PATCH v2 08/15] env: common: "
` [U-Boot] [PATCH v2 10/15] env: Initialise all the environments
` [U-Boot] [PATCH v2 11/15] env: mmc: depends on the MMC framework
` [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak
[U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled
2018-01-17 22:02 UTC (5+ messages)
[U-Boot] [PATCH 0/3] Rpi: Add support for second sd host controller
2018-01-17 22:00 UTC (9+ messages)
` [U-Boot] [PATCH 1/3] bcm2835_gpio: Add support for pinmux
` [U-Boot] [PATCH 3/3] mmc: bcm2835_sdhci: Add pinmux support
[U-Boot] [PATCH 0/3] power: s2mps11: Support the DM regulator
2018-01-17 20:06 UTC (10+ messages)
` [U-Boot] [PATCH 1/3] power: regulator: s2mps11: add a regulator driver for s2mps11
` [U-Boot] [PATCH 2/3] power: pmic: s2mps11: probe the regulator driver
` [U-Boot] [PATCH 3/3] configs: odroid-xu3: enable the configs relevant to regulator
[U-Boot] Pull request: u-boot-net.git master
2018-01-17 18:46 UTC (3+ messages)
[U-Boot] [BUG] x86: Could not get phandle node for /gpios@0:num-gpios(cell 0)
2018-01-17 17:53 UTC
[U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router
2018-01-17 15:52 UTC (2+ messages)
[U-Boot] [PATCH 0/5] zynq: Fun with board and CPU info display
2018-01-17 13:56 UTC (6+ messages)
` [U-Boot] [PATCH 1/5] zynq: Define macros for the device names
` [U-Boot] [PATCH 2/5] zynq: Rework FPGA initialization
` [U-Boot] [PATCH 3/5] zynq: Support CPU info display
` [U-Boot] [PATCH 4/5] zynq: board: Remove checkboard
` [U-Boot] [PATCH 5/5] configs: zynq: Enable DISPLAY_CPUINFO
[U-Boot] [PATCH] configs: keystone2: env: Fix burn_uboot_spi command
2018-01-17 12:56 UTC (4+ messages)
[U-Boot] [PATCH V4 00/32] imx: add i.MX8M support and i.MX8MQ EVK
2018-01-17 12:15 UTC (3+ messages)
` [U-Boot] [PATCH V4 30/32] power: pmic/regulator allow dm be omitted by SPL
[U-Boot] [PATCH] crypto/fsl: Fix HW accelerated hash commands
2018-01-17 12:03 UTC
[U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP
2018-01-17 11:17 UTC (8+ messages)
` [U-Boot] [PATCH v2 1/7] mmc: sdhci: Add support for disabling clock
` [U-Boot] [PATCH v2 6/7] mmc: zynq_sdhci: Add support for SD3.0
[U-Boot] [PATCH v8 00/11] Add VID support for QDS and RDB platforms
2018-01-17 10:43 UTC (12+ messages)
` [U-Boot] [PATCH v8 01/11] armv8: lsch3: Add serdes and DDR voltage setup
` [U-Boot] [PATCH v8 02/11] board: common:vid: Add LS1088A VID Supported voltage values
` [U-Boot] [PATCH v8 03/11] board: common: vid: Add board specific vdd adjust API
` [U-Boot] [PATCH v8 04/11] board: common: vid: Move IR chip specific code in flag
` [U-Boot] [PATCH v8 05/11] Kconfig: Add LTC3882 voltage regulator config
` [U-Boot] [PATCH v8 06/11] board: common: vid: Add support for LTC3882 voltage regulator chip
` [U-Boot] [PATCH v8 07/11] ddr: fsl: set cdr1 first in case 0.9v VDD is enabled for some SoCs
` [U-Boot] [PATCH v8 08/11] ls1088a: ddr: configure DDR for 0.9v for VID support
` [U-Boot] [PATCH v8 09/11] common: board_f: vid: Add VID specific API to adjust core voltage
` [U-Boot] [PATCH v8 10/11] ls1088a: Add VID support for QDS and RDB platforms
` [U-Boot] [PATCH v8 11/11] armv8: ls1088a: vid: Compiling VID specific functions for SPL
[U-Boot] [PATCH] arm: zynq: Mark cc108 uart to be initialized before relocation
2018-01-17 9:21 UTC
[U-Boot] [PATCH v2] mmc: sdhci-cadence: add HS200 support
2018-01-17 8:37 UTC (3+ messages)
[U-Boot] [PATCH 0/7] RPi: Properly handle dynamic serial configuration
2018-01-17 8:32 UTC (4+ messages)
` [U-Boot] [PATCH 1/7] serial: Use next serial device if probing fails
[U-Boot] [PATCH] sunxi: Fix display timing flags
2018-01-17 7:38 UTC (2+ messages)
[U-Boot] [PATCH 1/2] zynq: board: Remove checkboard()
2018-01-17 6:48 UTC (5+ messages)
` [U-Boot] [PATCH 2/2] zynq: Support CPU info display
[U-Boot] [PATCH 1/2] fsl: common :qixis: Add ifc and emmc switching via qixis
2018-01-17 6:46 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] armv8: ls1088: Add ifc, emmc lbmap and rcw_src entry for ls1088
[U-Boot] [PATCH] arm: zynq: Update years in copyright to reflect latest changes
2018-01-17 6:43 UTC
[U-Boot] [PATCH] arm: bootm-fdt.c: fix compiler warning
2018-01-17 6:00 UTC
[U-Boot] [PATCH] i2c: imx: bus arbitration fix when reading block data
2018-01-17 5:14 UTC (7+ messages)
[U-Boot] [PATCH] spl: atf: pass NULL for bl32_ep pc
2018-01-17 3:05 UTC
[U-Boot] [PATCH 1/2] spl: atf: add SPL_ATF_NO_PLATFORM_PARAM option
2018-01-17 2:15 UTC (5+ messages)
` [U-Boot] [PATCH 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM
[U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)
2018-01-17 1:52 UTC
[U-Boot] [PATCH] rockchip: rk3036: enable rockusb support on rk3036 based device
2018-01-17 1:51 UTC
[U-Boot] Please pull u-boot-dm
2018-01-17 1:26 UTC (2+ messages)
[U-Boot] Please pull from u-boot-i2c
2018-01-17 1:26 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox