messages from 2018-01-17 19:15:57 to 2018-01-19 10:24:18 UTC [more...]
[U-Boot] [PATCH] armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig
2018-01-19 10:24 UTC
[U-Boot] [PATCH 0/2] Fix QSPI boot on am43xx_idk
2018-01-19 10:02 UTC (3+ messages)
` [U-Boot] [PATCH 1/2] configs: Replace CONFIG_ISW_ENTRY_ADDR with CONFIG_SYS_TEXT_BASE
` [U-Boot] [PATCH 2/2] ARM: AM43XX: Call hw_data_init() again after relocation to update *ctrl
[U-Boot] [PATCH 0/2] warp7: add UART6 support
2018-01-19 9:53 UTC (3+ messages)
` [U-Boot] [PATCH 1/2] serial: mxc: support DTE mode
` [U-Boot] [PATCH 2/2] warp7: add support for console on UART6 and mikroBus
[U-Boot] [PATCH v2] board: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVM
2018-01-19 9:38 UTC (2+ messages)
[U-Boot] [PATCH 1/5] imx: mx7: change sdhc clk to 392M
2018-01-19 9:09 UTC (5+ messages)
` [U-Boot] [PATCH 2/5] mmc: fsl_esdhc: add strobe and tuning entry
` [U-Boot] [PATCH 3/5] ARM: dts: add pinmux and tuning settings for HS200/SDR104
` [U-Boot] [PATCH 4/5] mmc: fsl_esdhc: support SDR104 and HS200
` [U-Boot] [PATCH 5/5] imx: mx7dsabresd: enable UHS "
[U-Boot] [PATCH v2 00/18] efi_loader: enable EFI driver provided block device
2018-01-19 7:41 UTC (29+ messages)
` [U-Boot] [PATCH v2 02/18] efi_loader: address of the simple file system protocol
` [U-Boot] [PATCH v2 03/18] efi_loader: correct find "
` [U-Boot] [PATCH v2 04/18] efi_loader: print device path when entering efi_load_image
` [U-Boot] [PATCH v2 05/18] efi_loader: allocate correct memory type for EFI image
` [U-Boot] [PATCH v2 06/18] efi_loader: check tables in helloworld.efi
` [U-Boot] [PATCH v2 07/18] efi_loader: fix StartImage bootservice
` [U-Boot] [PATCH v2 08/18] efi_loader: efi_disk_register: correctly determine if_type_name
` [U-Boot] [PATCH v2 09/18] efi_loader: make efi_block_io_guid a global symbol
` [U-Boot] [PATCH v2 10/18] efi_loader: provide a function to create a partition node
` [U-Boot] [PATCH v2 11/18] efi_loader: make efi_disk_create_partitions a global symbol
` [U-Boot] [PATCH v2 12/18] efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitions
` [U-Boot] [PATCH v2 13/18] efi_loader: provide function to get last node of a device path
` [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles
` [U-Boot] [PATCH v2 15/18] tools: provide a tool to convert a binary file to an include
` [U-Boot] [PATCH v2 16/18] efi_driver: EFI block driver
` [U-Boot] [PATCH v2 17/18] efi_selftest: provide a test for block io
` [U-Boot] [PATCH v2 18/18] efi_loader: fix ExitBootServices
[U-Boot] [PATCH v2] sandbox: Add 64-bit sandbox
2018-01-19 7:17 UTC
[U-Boot] [PATCH RFC] sandbox: Add 64-bit sandbox
2018-01-19 7:16 UTC (6+ messages)
[U-Boot] [PATCH 01/23] mmc: omap_hsmmc: cleanup clock configuration
2018-01-19 3:46 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH v2 1/2] env: sf: Add support for env init for QSPI-NOR
2018-01-19 0:58 UTC (4+ messages)
` [U-Boot] [PATCH v2 2/2] armv8: ls1088ardb: Add environment variable address location "
[U-Boot] [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig
2018-01-19 0:57 UTC (2+ messages)
[U-Boot] [PATCH 1/2] arm64: ls1046a: Add sata distro boot support
2018-01-19 0:56 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] arm64: ls1012a: "
[U-Boot] [PATCH] freescale; Ensure common commands are not included in SPL binary
2018-01-19 0:54 UTC (2+ messages)
[U-Boot] [PATCH] arm: ls1021atwr: Rework local commands to not be included in SPL
2018-01-19 0:53 UTC (2+ messages)
[U-Boot] [PATCH] powerpc: P1010RDB: Rework local command to not be included in SPL
2018-01-19 0:52 UTC (2+ messages)
[U-Boot] [PATCH] board/ls2081ard: Correct code to get QMAP value in checkboard
2018-01-19 0:52 UTC (2+ messages)
[U-Boot] [PATCH] board/ls2081ardb: Update board related prints
2018-01-19 0:51 UTC (2+ messages)
[U-Boot] [PATCH v3] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE
2018-01-19 0:51 UTC (2+ messages)
[U-Boot] [PATCH v2] armv8/ls1088a: configure PMU's PCTBENR to enable WDT
2018-01-19 0:50 UTC (2+ messages)
[U-Boot] [PATCH] serial: lpuart: Proper device identification
2018-01-19 0:50 UTC (2+ messages)
[U-Boot] [PATCH v2 1/2] armv8/kconfig: Align boards of same family at one place
2018-01-19 0:49 UTC (4+ messages)
` [U-Boot] [PATCH v2 2/2] board: ls1012a: LS1012A-2G5RDB board support
[U-Boot] [PATCH] tools: remove unused ret
2018-01-18 23:01 UTC (2+ messages)
[U-Boot] [PATCH] cmd: console: Add serial devices probe command
2018-01-18 23:01 UTC (2+ messages)
[U-Boot] [PATCH] boston: Pad binary in .mcs to a multiple of 16 bytes
2018-01-18 22:36 UTC
[U-Boot] [PATCH 1/1] efi_loader: store DT in EFI_RUNTIME_SERVICES_DATA memory
2018-01-18 22:21 UTC
[U-Boot] [PATCH 0/2] test: Fixes to allow tests to run on a machine with old dtc
2018-01-18 21:46 UTC (5+ messages)
` [U-Boot] [PATCH 1/2] dtoc: Allow DTC environment variable to provide path to dtc
` [U-Boot] [PATCH 2/2] test: Set the DTC environment variable
[U-Boot] [PATCH 0/9] log: Support control over the log output format
2018-01-18 21:40 UTC (2+ messages)
[U-Boot] [PATCH] boston: Ensure DDR address calcuations don't overflow
2018-01-18 21:19 UTC
[U-Boot] Individual files dual licenses
2018-01-18 19:52 UTC (9+ messages)
[U-Boot] [PATCH] mmc: fix the wrong dislabing clock
2018-01-18 19:41 UTC (3+ messages)
[U-Boot] [PATCH v3 0/2] efi_loader: correctly call images
2018-01-18 19:28 UTC (3+ messages)
` [U-Boot] [PATCH v3 1/1] "
` [U-Boot] [PATCH v3 2/2] efi_selftest: test start image
[U-Boot] LS1046ARDB QSPI ENV fails
2018-01-18 18:39 UTC
[U-Boot] [PATCH v2 0/2] efi_loader: correctly call images
2018-01-18 18:31 UTC (10+ messages)
` [U-Boot] [PATCH v2 1/2] "
` [U-Boot] [PATCH v2 2/2] efi_selftest: test start image
[U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router
2018-01-18 17:56 UTC (4+ messages)
[U-Boot] [PATCH v2 0/2] Rpi: Add support for second sd host controller
2018-01-18 17:26 UTC (5+ messages)
` [U-Boot] [PATCH v2 1/2] bcm283x: Add pinctrl driver
` [U-Boot] [PATCH v2 2/2] mmc: Add bcm2835 sdhost controller
[U-Boot] [PATCH v2 00/15] env: Multiple env support and env transition for sunxi
2018-01-18 17:21 UTC (18+ messages)
` [U-Boot] [PATCH v2 03/15] env: Pass additional parameters to the env lookup function
` [U-Boot] [PATCH v2 06/15] env: fat: Make the debug messages play a little nicer
` [U-Boot] [PATCH v2 07/15] env: mmc: "
` [U-Boot] [PATCH v2 08/15] env: common: "
` [U-Boot] [PATCH v2 10/15] env: Initialise all the environments
` [U-Boot] [PATCH v2 11/15] env: mmc: depends on the MMC framework
` [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak
[U-Boot] [PATCH] mx6memcal: fix comment in board header file
2018-01-18 15:36 UTC
[U-Boot] [PATCH 1/2] mx6memcal: launder through savedefconfig
2018-01-18 15:08 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] mx6memcal: enable SDP support
[U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
2018-01-18 14:58 UTC (13+ messages)
[U-Boot] Broadwell-DE booting time
2018-01-18 14:51 UTC
[U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11
2018-01-18 14:45 UTC (12+ messages)
` [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
[U-Boot] [PATCH v2 00/13] arm: am57xx: Add support for am574-idk
2018-01-18 14:08 UTC (2+ messages)
[U-Boot] [PATCH v3 0/6] arm: ti: misc updates and bug fixes
2018-01-18 14:07 UTC (2+ messages)
[U-Boot] Please pull u-boot-fsl-qoriq master
2018-01-18 13:45 UTC (2+ messages)
[U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images
2018-01-18 13:40 UTC (4+ messages)
[U-Boot] [PATCH v6 0/2] Generic firmware loader
2018-01-18 13:18 UTC (11+ messages)
` [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
` [U-Boot] [U-Boot, v6, "
[U-Boot] [PATCH v2 0/3] STM32: Remove STMMAC clock setup from board
2018-01-18 13:10 UTC (4+ messages)
` [U-Boot] [PATCH v2 1/3] ARM: dts: stm32: Add STMMAC clocks for stm32f746
` [U-Boot] [PATCH v2 2/3] clk: clk_stm32f: Remove STMMAC clock setup
` [U-Boot] [PATCH v2 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()
[U-Boot] [PATCH 0/6] Add stmf429-evaluation board support
2018-01-18 12:39 UTC (7+ messages)
` [U-Boot] [PATCH 1/6] ARM: dts: stm32: add "u-boot, dm-pre-reloc" for clk_hse in stm32f7-u-boot
` [U-Boot] [PATCH 2/6] clk: stm32: retrieve external oscillator frequency from DT
` [U-Boot] [PATCH 3/6] configs: stm32f: Remove STM32_HSE_HZ for all STM32F series
` [U-Boot] [PATCH 4/6] board: stm32: Add stm32f429-evaluation board support
` [U-Boot] [PATCH 5/6] ARM: dts: stm32: Add STM32F429 Evaluation "
` [U-Boot] [PATCH 6/6] ARM: dts: stm32: add stm32429-eval-u-boot dts file
[U-Boot] [PATCH v4 07/11] spl: add support to booting with OP-TEE
2018-01-18 11:21 UTC (8+ messages)
` [U-Boot] [U-Boot, v4, "
[U-Boot] UDP packet sender
2018-01-18 10:56 UTC
[U-Boot] mmc1 not working on Samsung snow chromebook
2018-01-18 9:05 UTC (7+ messages)
[U-Boot] [PATCH] arm64: zynqmp: Add identification string to ep108
2018-01-18 8:49 UTC
[U-Boot] [PATCH] arm64: zynqmp: Enable gem on zc1751-dc5
2018-01-18 8:48 UTC
[U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz
2018-01-18 8:43 UTC (4+ messages)
[U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time
2018-01-18 8:15 UTC (2+ messages)
[U-Boot] [PATCH v2] ubi: Ensure no fastmap flush after uif_close
2018-01-18 8:07 UTC
[U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
2018-01-18 7:47 UTC (8+ messages)
[U-Boot] [PATCH 0/3] STM32: Remove STMMAC clock setup from board
2018-01-18 7:47 UTC (8+ messages)
` [U-Boot] [PATCH 1/3] ARM: dts: stm32: Add STMMAC clocks for stm32f746
` [U-Boot] [PATCH 2/3] clk: clk_stm32f: Remove STMMAC clock setup
` [U-Boot] [PATCH 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()
[U-Boot] X86 Broadwell-DE override FSP configuration
2018-01-18 6:45 UTC (3+ messages)
[U-Boot] [PATCH v2 0/4] ddr: marvell: update DDR driver
2018-01-18 4:16 UTC (5+ messages)
` [U-Boot] [PATCH v2 1/4] ddr: marvell: only assert M_ODT[0] on write for a single CS
` [U-Boot] [PATCH v2 2/4] ddr: marvell: use correct TREFI value
` [U-Boot] [PATCH v2 3/4] ddr: marvell: update additional ODT setting
` [U-Boot] [PATCH v2 4/4] ddr: marvell: update ddr controller init and freq
[U-Boot] [PATCH v2 1/1] dm: video: Correct color ANSI escape sequence support
2018-01-18 2:42 UTC
[U-Boot] [PATCH v2 0/7] RPi: Properly handle dynamic serial configuration
2018-01-17 23:18 UTC (18+ messages)
` [U-Boot] [PATCH v2 1/7] serial: Use next serial device if probing fails
` [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable
` [U-Boot] [PATCH v2 5/7] rpi: Properly detect which serial device is active
` [U-Boot] [PATCH v2 7/7] rpi: Force skip_init on serial devices
[U-Boot] x86: 64-bit U-boot image compilation errors
2018-01-17 23:03 UTC
[U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled
2018-01-17 22:02 UTC (5+ messages)
[U-Boot] [PATCH 0/3] Rpi: Add support for second sd host controller
2018-01-17 22:00 UTC (8+ messages)
` [U-Boot] [PATCH 1/3] bcm2835_gpio: Add support for pinmux
` [U-Boot] [PATCH 3/3] mmc: bcm2835_sdhci: Add pinmux support
[U-Boot] [PATCH 0/3] power: s2mps11: Support the DM regulator
2018-01-17 20:06 UTC (7+ messages)
` [U-Boot] [PATCH 1/3] power: regulator: s2mps11: add a regulator driver for s2mps11
` [U-Boot] [PATCH 2/3] power: pmic: s2mps11: probe the regulator driver
` [U-Boot] [PATCH 3/3] configs: odroid-xu3: enable the configs relevant to regulator
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox