messages from 2018-05-11 11:08:34 to 2018-05-14 09:09:05 UTC [more...]
[U-Boot] [PATCH v3 00/13] Add fastboot UDP support
2018-05-14 9:09 UTC (11+ messages)
` [U-Boot] [PATCH v3 01/13] fastboot: Move fastboot to drivers/fastboot
` [U-Boot] [PATCH v3 02/13] fastboot: Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT
` [U-Boot] [PATCH v3 03/13] fastboot: Refactor fastboot_okay/fail to take response
` [U-Boot] [PATCH v3 04/13] fastboot: Extract fastboot_okay/fail to fb_common.c
` [U-Boot] [PATCH v3 05/13] fastboot: Correct dependencies in FASTBOOT_FLASH
` [U-Boot] [PATCH v3 06/13] fastboot: Add missing newlines
` [U-Boot] [PATCH v3 07/13] fastboot: Remove FIXME for CONFIG_FASTBOOT_...NAME
` [U-Boot] [PATCH v3 08/13] fastboot: Fix parameter types in _fb_nand_write
` [U-Boot] [PATCH v3 09/13] fastboot: Rename fb_set_reboot_flag to fastboot_set_reboot_flag
` [U-Boot] [PATCH v3 10/13] fastboot: Extract common definitions from USB fastboot
[U-Boot] [PATCH] ARM: socfpga: Put stack at the end of SRAM
2018-05-14 9:06 UTC (5+ messages)
[U-Boot] [PATCH v7 00/35] phy: sunxi: Add Allwinner sun4i USB PHY
2018-05-14 9:05 UTC (10+ messages)
` [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5
[U-Boot] NDS32 toolchain?
2018-05-14 8:31 UTC (7+ messages)
[U-Boot] [PATCH v2] board: sun50i: Add Amarula A64 Relic initial support
2018-05-14 7:56 UTC (3+ messages)
[U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode
2018-05-14 7:47 UTC (5+ messages)
[U-Boot] [PATCH] twister: Let SPL load U-Boot from MMC
2018-05-14 7:17 UTC
[U-Boot] [PATCH 0/7] *** Qualcomm Snapdraon serial fixes***
2018-05-14 7:10 UTC (17+ messages)
` [U-Boot] [PATCH 1/7] db820c: set clk node to be probed before relocation
` [U-Boot] [PATCH 2/7] serial: serial_msm: fail probe if settings clocks fails
` [U-Boot] [PATCH 3/7] serial: serial_msm: initialize uart only before relocation
` [U-Boot] [PATCH 4/7] mach-snapdragon: Fix UART clock flow
` [U-Boot] [PATCH 5/7] mach-snapdragon: Introduce pinctrl driver
` [U-Boot] [PATCH 6/7] db410: added pinctrl node and serial bindings
` [U-Boot] [PATCH 7/7] serial: serial_msm: added pinmux & config
[U-Boot] u-boot linker problem
2018-05-14 7:00 UTC
[U-Boot] [PATCH] sf: Add support for ISSI is25wp
2018-05-14 6:30 UTC
[U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4
2018-05-13 22:45 UTC (16+ messages)
` [U-Boot] [PATCH v2 2/6] board: eets: pdu001: Fix wrong default value in Kconfig
` [U-Boot] [PATCH v2 3/6] scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
` [U-Boot] [PATCH v2 4/6] scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987
` [U-Boot] [PATCH v2 5/6] scripts/dtc: Re-sync with Linux 4.17-rc4
` [U-Boot] [PATCH v2 6/6] sandbox: dts: test: Fix wrong aliases property names
[U-Boot] [PATCH] spl: Add full fitImage support
2018-05-13 22:22 UTC (3+ messages)
[U-Boot] [PATCH 1/3] fit: Fix CONFIG_FIT_SPL_PRINT
2018-05-13 22:02 UTC (6+ messages)
` [U-Boot] [PATCH 2/3] fit: Add empty fit_print_contents() and fit_image_print()
` [U-Boot] [PATCH 3/3] fit: Add standalone image type handling
[U-Boot] [PATCH v2 00/11] pmic: sandbox: Add support for MC34709 PMIC
2018-05-13 22:02 UTC (21+ messages)
` [U-Boot] [PATCH v2 02/11] pmic: fsl: Define number of bytes sent at once by MC34708 PMIC
` [U-Boot] [PATCH v2 03/11] pmic: Add support for setting transmission length in uclass private data
` [U-Boot] [PATCH v2 04/11] pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3 bytes transmissions
` [U-Boot] [PATCH v2 05/11] pmic: dm: Add support for MC34708 for PMIC DM
` [U-Boot] [PATCH v2 06/11] pmic: Rewrite the pmic command to not only work with single byte transmission
` [U-Boot] [PATCH v2 07/11] sandbox: Rewrite i2c_pmic_emul.c to support PMIC with 3 bytes transmission
` [U-Boot] [PATCH v2 08/11] sandbox: Enable support for MC34708 PMIC in DTS
` [U-Boot] [PATCH v2 09/11] sandbox: Enable MC34708 PMIC support
` [U-Boot] [PATCH v2 10/11] sandbox: tests: Exclude common test code (pmic_get) in test/dm/pmic.c
` [U-Boot] [PATCH v2 11/11] sandbox: tests: Add tests for mc34708 PMIC device
[U-Boot] [PATCH v3 0/3] drivers: Add reset ctrl to drivers
2018-05-13 22:01 UTC (5+ messages)
` [U-Boot] [PATCH v3 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver
` [U-Boot] [PATCH v3 3/3] net: designware: "
[U-Boot] [PATCH v2] timer: Add Cadence TTC timer counter support
2018-05-13 22:00 UTC (2+ messages)
[U-Boot] [PATCH v10 0/3] Why netboot:
2018-05-13 22:00 UTC (11+ messages)
` [U-Boot] [PATCH v10 3/3] Adding wget
` [U-Boot] net: "
[U-Boot] [GIT] Pull request: u-boot-dfu (13.05.2018)
2018-05-13 19:39 UTC (2+ messages)
[U-Boot] [PATCH] ext4fs: Add ext4 extent tree cache
2018-05-13 19:03 UTC (6+ messages)
[U-Boot] [PATCH] net: include/phy.h: add new mode for internal phy
2018-05-13 18:57 UTC (2+ messages)
[U-Boot] [PATCH 0/3] fpga: zynqmp: Fpga changes
2018-05-13 18:54 UTC (3+ messages)
` [U-Boot] [PATCH 3/3] fpga: zynqmp: Fix the nonsecure bitstream loading issue
[U-Boot] [PATCH] bootcount: Add bootcount command
2018-05-13 14:56 UTC (2+ messages)
[U-Boot] [PATCH v2 1/1] arm: print instructions pointed to by pc
2018-05-13 14:45 UTC (3+ messages)
[U-Boot] [PATCH] mx6: remove duplicated BOUNCE_BUFFER defines
2018-05-13 14:33 UTC (2+ messages)
[U-Boot] [PATCH] mmc: Improve tinification
2018-05-13 11:58 UTC (2+ messages)
` [U-Boot] "
[U-Boot] Support for the Raspberry Pi 3B+?
2018-05-13 8:27 UTC (2+ messages)
[U-Boot] [PATCH 1/6] ARM: rmobile: Drop old R8A7790 PFC tables
2018-05-12 21:16 UTC (6+ messages)
` [U-Boot] [PATCH 2/6] ARM: rmobile: Drop old R8A7791 "
` [U-Boot] [PATCH 3/6] ARM: rmobile: Drop old R8A7792 "
` [U-Boot] [PATCH 4/6] ARM: rmobile: Drop old R8A7793 "
` [U-Boot] [PATCH 5/6] ARM: rmobile: Drop old R8A7794 "
` [U-Boot] [PATCH 6/6] ARM: rmobile: Unify Gen2 Makefile entry
[U-Boot] [PATCH] ARM: rmobile: Update V2H Blanche
2018-05-12 21:15 UTC
[U-Boot] [PATCH 1/4] i2c: rcar_i2c: Remove the driver
2018-05-12 21:15 UTC (4+ messages)
` [U-Boot] [PATCH V2 2/4] i2c: rcar_i2c: Add DM and DT capable I2C driver
` [U-Boot] [PATCH 3/4] ARM: rmobile: Enable DM capable RCar I2C driver on Lager
` [U-Boot] [PATCH 4/4] ARM: rmobile: Enable DM capable RCar I2C driver on Silk
[U-Boot] [PATCH 01/12] ARM: socfpga: Sync A10 clock manager binding parser
2018-05-12 20:30 UTC (12+ messages)
` [U-Boot] [PATCH 02/12] ARM: socfpga: Sort the DT Makefile
` [U-Boot] [PATCH 03/12] ARM: socfpga: Synchronize Arria10 DTs
` [U-Boot] [PATCH 04/12] ARM: socfpga: Synchronize Arria10 SoCDK SDMMC handoff
` [U-Boot] [PATCH 05/12] ARM: socfpga: Repair A10 EMAC reset handling
` [U-Boot] [PATCH 06/12] ARM: socfpga: Rename the gen5 sdram driver to more specific name
` [U-Boot] [PATCH 07/12] ARM: socfpga: Add DRAM bank size initialization function
` [U-Boot] [PATCH 08/12] ARM: socfpga: Add DDR driver for Arria 10
` [U-Boot] [PATCH 09/12] configs: Add DDR Kconfig support "
` [U-Boot] [PATCH 10/12] ARM: socfpga: Enable SPL memory allocation
` [U-Boot] [PATCH 11/12] ARM: socfpga: Adding clock frequency info for U-Boot
` [U-Boot] [PATCH 12/12] ARM: socfpga: Adding SoCFPGA info for both SPL and U-Boot
[U-Boot] [PATCH] ARM: socfpga: Convert to DM serial
2018-05-12 20:28 UTC
[U-Boot] [PATCH] ARM: socfpga: Clean up Kconfig entries
2018-05-12 20:27 UTC
[U-Boot] [PATCH] ARM: socfpga: Zap CONFIG_SOCFPGA_VIRTUAL_TARGET
2018-05-12 20:27 UTC
[U-Boot] [PATCH] fdt: Add another Altera Arria10 clock init compatible
2018-05-12 20:25 UTC
[U-Boot] [PATCH] spl: fit: Add support for loading FPGA bitstream
2018-05-12 20:25 UTC
[U-Boot] [RFC PATCH 1/2] kconfig: re-sync with Linux 4.17-rc4
2018-05-12 17:38 UTC (5+ messages)
` [U-Boot] [RFC PATCH 2/2] board: eets: pdu001: Fix wrong default value in Kconfig
[U-Boot] Beaglebone Black U-boot won't buid - THUMB instruction issue
2018-05-12 13:50 UTC (4+ messages)
[U-Boot] [PATCH] mx6: Select CONFIG_MP with MX6_SMP
2018-05-12 8:45 UTC
[U-Boot] [PATCH] mx7: remove empty ifndef statement
2018-05-12 8:44 UTC
[U-Boot] [PATCH] mx6 common: remove dangling comment
2018-05-12 8:43 UTC
[U-Boot] [PATCH 0/2] efi_loader: adjust definitions of variable services
2018-05-12 7:58 UTC (3+ messages)
` [U-Boot] [PATCH 1/2] "
` [U-Boot] [PATCH 2/2] efi_selftest: unit test for "
[U-Boot] [PATCH] net: cpsw: ti: Reap completed packets before stopping interface
2018-05-12 7:30 UTC
[U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?
2018-05-12 5:50 UTC (4+ messages)
[U-Boot] [PATCH v2] ext4fs: Add ext4 extent tree cache
2018-05-12 1:49 UTC (2+ messages)
[U-Boot] Pull request, u-boot-tegra/master
2018-05-12 1:49 UTC (2+ messages)
[U-Boot] [PATCH 1/1] README.uefi: update list of missing functionality
2018-05-12 1:28 UTC
[U-Boot] [PATCH v4] efi_loader: fix off-by-one bug in efi_get_variable
2018-05-12 1:02 UTC (2+ messages)
[U-Boot] [PATCH v3] efi_loader: fix off-by-one bug in efi_get_variable
2018-05-11 20:14 UTC (3+ messages)
[U-Boot] [PATCH 0/2] i.MX31PDK: Move CONFIG_MX31* to Kconfig
2018-05-11 19:22 UTC (5+ messages)
` [U-Boot] [PATCH 1/2] mx31pdk: Convert CONFIG_MX31 flag to use Kconfig
` [U-Boot] [PATCH 2/2] mx31: Convert MX31_HCLK_FREQ and MX31_CLK32 to Kconfig
[U-Boot] [GIT PULL] Xilinx changes for v2018.07
2018-05-11 19:22 UTC (2+ messages)
[U-Boot] [PATCH] armv8: ls1088a: change dpl load command from apply to lazyapply
2018-05-11 18:44 UTC
[U-Boot] [PATCH 1/1] efi_loader: DocBook comments for boot services
2018-05-11 16:15 UTC
[U-Boot] Please pull u-boot-fsl-qoriq master
2018-05-11 15:45 UTC (2+ messages)
[U-Boot] driver: net: fsl-mc: Initialization of MC memory
2018-05-11 15:30 UTC
[U-Boot] [PATCH v1 00/21] This patch series brings in sync DISPLAY5 internal
2018-05-11 14:51 UTC (22+ messages)
` [U-Boot] [PATCH v1 01/21] display5: factory: Add support for BOOT_FROM = FACTORY switch
` [U-Boot] [PATCH v1 02/21] display5: config: factory: Setup IP config data according to LEG production setup
` [U-Boot] [PATCH v1 03/21] display5: config: Add "factory" (1MiB) SPI-NOR partition in u-boot
` [U-Boot] [PATCH v1 04/21] display5: config: Provide command to flash the whole SPI-NOR memory
` [U-Boot] [PATCH v1 05/21] display5: spl: Check return code of the env_* functions
` [U-Boot] [PATCH v1 06/21] display5: config: Reset the board when bootm fails
` [U-Boot] [PATCH v1 07/21] display5: config: Remove support for Linux initramfs recovery image boot
` [U-Boot] [PATCH v1 08/21] display5: config: Update SPI-NOR partition for larger swupdate-initramfs
` [U-Boot] [PATCH v1 09/21] display5: config: factory: Extend mtdparts to support LEG factory partition
` [U-Boot] [PATCH v1 10/21] display5: Support for the emergency PAD pressing
` [U-Boot] [PATCH v1 11/21] display5: wdt: Enable WDT support (both SPL and u-boot)
` [U-Boot] [PATCH v1 12/21] display5: config: Provide 'tftp_mmc_rootfs_bkp' command to write BACKUP rootfs
` [U-Boot] [PATCH v1 13/21] display5: config: factory: Update BACKUP rootfs in factory mode
` [U-Boot] [PATCH v1 14/21] display5: config: Update swupdate initramfs file name (now supporting ext4)
` [U-Boot] [PATCH v1 15/21] display5: ddr: Enable support for DDR3 auto calibration
` [U-Boot] [PATCH v1 16/21] display5: net: Add function to read ethaddr from iMX6 fuses
` [U-Boot] [PATCH v1 17/21] display5: config: Add cma=256M to command line arguments
` [U-Boot] [PATCH v1 18/21] display5: config: Reduce rootfs2 (BACKUP) size from 1528M to 512M
` [U-Boot] [PATCH v1 19/21] display5: display5_defconfig: Enable support for gpt command (CMD_GPT) in production u-boot
` [U-Boot] [PATCH v1 20/21] display5: config: Add GPT verification and restoration code on SWUpdate entry
` [U-Boot] [PATCH v1 21/21] display5: Add missing environment.h include to avoid warning
[U-Boot] [PATCH] mmc: Changed the datatype of the variable to handle 64-bit arch
2018-05-11 12:57 UTC (2+ messages)
[U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP
2018-05-11 12:56 UTC (2+ messages)
[U-Boot] [PATCH v3 3/3] spi: mxs_spi: DM conversion
2018-05-11 11:31 UTC (6+ messages)
[U-Boot] [PULL] u-boot-socfpga/master
2018-05-11 11:09 UTC (2+ messages)
[U-Boot] [PATCH] SPDX: Convert a few files that were missed before
2018-05-11 11:08 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH 1/1] tools/file2include: avoid incorrect comments
2018-05-11 11:08 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH v2 1/1] include: update log2 header from the Linux kernel
2018-05-11 11:08 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH 1/1] xyz-modem: va_start() must be matched by va_end()
2018-05-11 11:08 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 1/1] tools/file2include: create Linux style SPDX header
2018-05-11 11:08 UTC (2+ messages)
` [U-Boot] [U-Boot, "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox