messages from 2018-05-28 11:18:27 to 2018-05-29 12:37:01 UTC [more...]
[U-Boot] [PATCH v3 6/6] iotrace: fix behaviour when buffer is full
2018-05-29 12:37 UTC
[U-Boot] [PATCH v2 0/7] Improvements for the dwc3_generic driver
2018-05-29 12:36 UTC (8+ messages)
` [U-Boot] [PATCH v2 1/7] usb: gadget: Do not call board_usb_xxx() directly in USB gadget drivers
` [U-Boot] [PATCH v2 2/7] usb: introduce a separate config option for DM USB device
` [U-Boot] [PATCH v2 3/7] usb: udc: implement DM versions of usb_gadget_initialize()/_release()/_handle_interrupt()
` [U-Boot] [PATCH v2 4/7] dwc3_generic: do not probe the USB device driver when it's bound
` [U-Boot] [PATCH v2 5/7] dwc3: move phy operation to core.c
` [U-Boot] [PATCH v2 6/7] dwc3-generic: Handle the PHYs, the clocks and the reset lines
` [U-Boot] [PATCH v2 7/7] dwc3-generic: Add select_dr_mode operation
[U-Boot] [PATCH v7 00/18] Add fastboot UDP support
2018-05-29 11:24 UTC (3+ messages)
[U-Boot] [PATCH v1 3/5] dm: serial: Add setparity
2018-05-29 11:14 UTC (4+ messages)
` [U-Boot] [U-Boot,v1,3/5] "
[U-Boot] [PATCH v1 0/7] Improvements for the dwc3_generic driver
2018-05-29 11:08 UTC (12+ messages)
` [U-Boot] [PATCH v1 1/7] usb: gadget: Do not call board_usb_xxx() directly in USB gadget drivers
` [U-Boot] [PATCH v1 2/7] usb: introduce a separate config option for DM USB device
[U-Boot] [PATCH] arm: mvebu: switch clearfog to use device-tree i2c and gpio
2018-05-29 10:38 UTC (7+ messages)
[U-Boot] [PATCH] bug.h: introduce WARN_ONCE
2018-05-29 10:34 UTC (3+ messages)
[U-Boot] Parallel make issue with helloworld.efi
2018-05-29 9:57 UTC (3+ messages)
` [U-Boot] [PATCH 1/1] efi_loader: avoid make race condition
[U-Boot] [PATCH] sf: Enable FSR polling on N25Q256(A)
2018-05-29 9:00 UTC (4+ messages)
[U-Boot] Please pull u-boot-marvell
2018-05-29 8:43 UTC
[U-Boot] [PATCH 1/2] configs: remove redundant comment sections
2018-05-29 8:40 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] configs: remove CONFIG_SYS_MVFS
[U-Boot] [PATCH] configs: remove empty #ifdef block from mv-common.h
2018-05-29 8:38 UTC (2+ messages)
[U-Boot] [PATCH v4 0/4] ahci mvebu driver updates
2018-05-29 8:35 UTC (2+ messages)
[U-Boot] [PATCH v2 1/3] mvebu: pinctrl: sync compatible string with Linux 4.17-rc4
2018-05-29 8:32 UTC (6+ messages)
` [U-Boot] [PATCH v2 2/3] mvebu: pinctrl: Add SD/eMMC PHY selector to the driver
` [U-Boot] [PATCH v2 3/3] dts: mvebu: a80x0: Enable SD/eMMC interfaces
[U-Boot] [PATCH 0/6] ARM: kirkwood: dts conversion round 2
2018-05-29 8:31 UTC (2+ messages)
[U-Boot] [PATCH] board: turris_mox: Add fixed regulator support to defconfig
2018-05-29 8:31 UTC (3+ messages)
[U-Boot] [PATCH v2 1/2] drivers; add DM_NO_OF Kconfig option
2018-05-29 8:20 UTC (6+ messages)
[U-Boot] Uboot send pull request
2018-05-29 6:56 UTC
[U-Boot] [PATCH 1/2] drivers/rtc: prepare mvrtc for DM conversion
2018-05-29 6:46 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] drivers/rtc: convert mvrtc to DM
[U-Boot] [PATCH] arm: mvebu: enable sata support for clearfog
2018-05-29 6:44 UTC (2+ messages)
[U-Boot] [RFC] arm: mvebu: Add Helios4 Armada 38x initial support
2018-05-29 6:41 UTC (2+ messages)
[U-Boot] [PATCH 1/2] mvebu: neta: align DMA buffers
2018-05-29 6:18 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] net: ping,arp: Fix cache alignment issues
[U-Boot] [PATCH 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x
2018-05-29 6:11 UTC (3+ messages)
` [U-Boot] [PATCH 2/2] mvebu: turris_omnia: add note about i2c slave disable
[U-Boot] [PATCH] zynq: Add Zynq MiniZed board support
2018-05-29 5:44 UTC (2+ messages)
[U-Boot] [PATCH] malloc: Use malloc simple before malloc is fully initialized in memalign()
2018-05-29 5:16 UTC (10+ messages)
` [U-Boot] "
[U-Boot] [PATCH v2 0/2] sunxi: fix eMMC stability issues on A64
2018-05-29 5:04 UTC (5+ messages)
` [U-Boot] [PATCH v2 1/2] sunxi-mmc: use new mode "
[U-Boot] [PATCH] sf: Add Winbond W25Q256 ID
2018-05-29 4:37 UTC (2+ messages)
[U-Boot] [PATCH V2] sf: Add Macronix MX25U25635F ID
2018-05-29 4:36 UTC (2+ messages)
[U-Boot] [PATCH 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x
2018-05-29 4:02 UTC (5+ messages)
[U-Boot] [PATCH 00/41] imx: add i.MX8QXP support
2018-05-29 3:59 UTC (48+ messages)
` [U-Boot] [PATCH 01/41] imx: import SCFW API
` [U-Boot] [PATCH 02/41] imx: add Kconfig entry for i.MX8
` [U-Boot] [PATCH 03/41] arm: build mach-imx "
` [U-Boot] [PATCH 04/41] imx8: add IPC communication support between ACore and SCU
` [U-Boot] [PATCH 05/41] arm: global_data: introduce ipc_channel_handle
` [U-Boot] [PATCH 06/41] imx: boot_mode: Add FLEXSPI boot entry
` [U-Boot] [PATCH 07/41] imx8: add imx-regs header file
` [U-Boot] [PATCH 08/41] imx8: pins: include i.MX8QXP pin header when CONFIG_IMX8QXP defined
` [U-Boot] [PATCH 09/41] imx: add i.MX8 cpu type
` [U-Boot] [PATCH 10/41] imx8: add basic cpu support
` [U-Boot] [PATCH 11/41] imx8: add boot device detection
` [U-Boot] [PATCH 12/41] imx8: implement mmc_get_env_dev
` [U-Boot] [PATCH 13/41] imx8: implement imx_get_mac_from_fuse
` [U-Boot] [PATCH 14/41] imx8: implement get_board_serial
` [U-Boot] [PATCH 15/41] imx8: add mmu and dram related functiions
` [U-Boot] [PATCH 16/41] imx8: add bootaux support
` [U-Boot] [PATCH 17/41] imx8: add arch_cpu_init
` [U-Boot] [PATCH 18/41] imx8: add clock driver
` [U-Boot] [PATCH 19/41] imx8: add iomux configuration code
` [U-Boot] [PATCH 20/41] fsl_esdhc: Update usdhc driver to support i.MX8
` [U-Boot] [PATCH 21/41] serial_lpuart: Update lpuart "
` [U-Boot] [PATCH 22/41] serial: lpuart: Enable RX and TX FIFO
` [U-Boot] [PATCH 23/41] imx_lpi2c: Update lpi2c driver to support imx8
` [U-Boot] [PATCH 24/41] imx: lpi2c: fix clock issue when NACK detected
` [U-Boot] [PATCH 25/41] lpi2c: Fix bus stop problem in xfer
` [U-Boot] [PATCH 26/41] lpi2c: Add bus busy error handling
` [U-Boot] [PATCH 27/41] net: fec: do not access reserved register for i.MX8
` [U-Boot] [PATCH 28/41] net: fec_mxc: Add the init_clk_fec function
` [U-Boot] [PATCH 29/41] sata: Add i.MX8 SATA support
` [U-Boot] [PATCH 30/41] gpio: mxc_gpio: add support for i.MX8
` [U-Boot] [PATCH 31/41] pinctrl: Add pinctrl driver "
` [U-Boot] [PATCH 32/41] power: Add power domain "
` [U-Boot] [PATCH 33/41] power: Add PD device lookup interface to power domain uclass
` [U-Boot] [PATCH 34/41] power-domain: add dummy functions when CONFIG_POWER_DOMAIN not defined
` [U-Boot] [PATCH 35/41] dm: core: device: enable power domain in probe
` [U-Boot] [PATCH 36/41] drivers: regulator: fixed: add off-on-delay-us
` [U-Boot] [PATCH 37/41] mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue
` [U-Boot] [PATCH 38/41] log: include command header file
` [U-Boot] [PATCH 39/41] i2c-mux: pca954x: support pca9646 i2c switch
` [U-Boot] [PATCH 40/41] dts: imx8qxp: Add DTS and binding header files
` [U-Boot] [PATCH 41/41] imx: 8qxp_mek: Add i.MX8QXP MEK board support
[U-Boot] Pull request: u-boot-ubi/master
2018-05-29 3:37 UTC
[U-Boot] [PATCH] ubi: fastmap: Implement produce_free_peb()
2018-05-29 3:35 UTC (2+ messages)
[U-Boot] [PATCH 1/4] mx7: psci: add cpu hotplug support
2018-05-29 0:52 UTC (3+ messages)
[U-Boot] [PATCH] Remove CONFIG_MVGBE from config_whitelist.txt
2018-05-29 0:24 UTC (4+ messages)
` [U-Boot] "
[U-Boot] [PATCH] mvebu: a38x: Force receiver detected on PCIe lanes
2018-05-28 22:22 UTC (7+ messages)
[U-Boot] [PATCH] db820c: add dummy clock for uart node
2018-05-28 21:30 UTC
[U-Boot] [PATCH v2 4/7] mach-snapdragon: Fix UART clock flow
2018-05-28 21:28 UTC (17+ messages)
` [U-Boot] [U-Boot,v2,4/7] "
[U-Boot] [PATCH v2] mach-snapdragon: increase size of malloc pool
2018-05-28 20:55 UTC
[U-Boot] [PATCH] arm: sunxi: Add support for Pengpod 1000 tablet
2018-05-28 20:03 UTC
[U-Boot] [PATCH 00/12] binman: A few more features
2018-05-28 19:17 UTC (3+ messages)
[U-Boot] [PATCH v3] add FIT data-position & data-offset property support
2018-05-28 19:13 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH] mmc: stm32_sdmmc2: Fix stm32_sdmmc2_start_cmd()
2018-05-28 19:13 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v1 4/4] stm32mp1: use OTP to configure MAC address and serial number
2018-05-28 19:13 UTC (2+ messages)
` [U-Boot] [U-Boot, v1, "
[U-Boot] [PATCH v1 3/4] stm32mp1: add FUSE command support
2018-05-28 19:13 UTC (2+ messages)
` [U-Boot] [U-Boot,v1,3/4] "
[U-Boot] [PATCH v1 2/4] stm32mp1: add bsec driver
2018-05-28 19:13 UTC (2+ messages)
` [U-Boot] [U-Boot,v1,2/4] "
[U-Boot] [PATCH v1 1/4] stm32mp1: remove the second TAMP_BOOT_CONTEXT update
2018-05-28 19:13 UTC (2+ messages)
` [U-Boot] [U-Boot, v1, "
[U-Boot] [PATCH v1 5/5] stm32mp1: Allow to activate CONFIG_DEBUG_UART
2018-05-28 19:13 UTC (2+ messages)
` [U-Boot] [U-Boot, v1, "
[U-Boot] [PATCH v1 4/5] serial: stm32: Add setparity support
2018-05-28 19:13 UTC (2+ messages)
` [U-Boot] [U-Boot,v1,4/5] "
[U-Boot] [PATCH v1 2/5] serial: stm32: Fix bits defines name
2018-05-28 19:13 UTC (2+ messages)
` [U-Boot] [U-Boot,v1,2/5] "
[U-Boot] [PATCH v1 1/5] serial: stm32: Add debug uart support
2018-05-28 19:13 UTC (2+ messages)
` [U-Boot] [U-Boot,v1,1/5] "
[U-Boot] [PATCH v2] ram: stm32_sdram: Adds stm32f429-disco fixes for HardFault at booting
2018-05-28 19:12 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH v2 7/7] serial: serial_msm: added pinmux & config
2018-05-28 19:12 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 6/7] db410: added pinctrl node and serial bindings
2018-05-28 19:12 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 5/7] mach-snapdragon: Introduce pinctrl driver
2018-05-28 19:12 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 3/7] serial: serial_msm: initialize uart only before relocation
2018-05-28 19:12 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 2/7] serial: serial_msm: fail probe if settings clocks fails
2018-05-28 19:12 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 1/7] db820c: set clk node to be probed before relocation
2018-05-28 19:12 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH] PCI: Document pciauto_region_allocate()
2018-05-28 19:12 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH 2/2] PCI: autoconfig: Don't allocate 64-bit addresses to 32-bit only resources
2018-05-28 19:12 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 1/2] PCI: Add newlines to debug prints in pci_auto_common.c
2018-05-28 19:12 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 3/3] doc: qemu-arm: Drop highmem=off references
2018-05-28 19:12 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 2/3] ARM: qemu-arm: Bump RAM size in AArch64 MMU table
2018-05-28 19:12 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 1/3] PCI: dm: Ignore 64-bit memory regions if CONFIG_SYS_PCI_64BIT not set
2018-05-28 19:12 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH] Import Android's dt_table.h for DT image format
2018-05-28 15:19 UTC
[U-Boot] [PATCH v2 1/2] common: Add support for Android DT image
2018-05-28 14:01 UTC (6+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v3 1/3] misc: docs: Fix comments in misc.h
2018-05-28 13:01 UTC (9+ messages)
` [U-Boot] [PATCH v3 2/3] misc: uclass: Add enable/disable function
` [U-Boot] [PATCH v3 3/3] misc: Add gdsys_ioep driver
[U-Boot] FYI: Android bootloader flow documentation published
2018-05-28 12:52 UTC
[U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code
2018-05-28 12:43 UTC (12+ messages)
[U-Boot] [UBOOT PATCH] spi: xilinx_spi: Modify xilinx spi driver
2018-05-28 12:35 UTC
[U-Boot] [PATCH] ARC: Cache: Don't compare I$ and D$ line lengths
2018-05-28 12:12 UTC
[U-Boot] [PATCH] x86: enable cpu-specific functions for x86_64 target
2018-05-28 12:01 UTC (3+ messages)
[U-Boot] [PATCH v10 00/35] phy: sunxi: Add Allwinner sun4i USB PHY
2018-05-28 11:18 UTC (21+ messages)
` [U-Boot] [PATCH v10 16/35] phy: sun4i-usb: Add A31 PHY config
` [U-Boot] [PATCH v10 17/35] phy: sun4i-usb: Add A33 USB "
` [U-Boot] [PATCH v10 18/35] phy: sun4i-usb: Add A23 "
` [U-Boot] [PATCH v10 19/35] device-tree-bindings: phy: Sync sun4i-usb-phy bindings
` [U-Boot] [PATCH v10 20/35] board: sunxi: Use generic-phy for board_usb_cable_connected
` [U-Boot] [PATCH v10 21/35] phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect
` [U-Boot] [PATCH v10 22/35] usb: sunxi: Switch to use generic-phy
` [U-Boot] [PATCH v10 23/35] sunxi: Drop legacy usb_phy.c
` [U-Boot] [PATCH v10 24/35] sunxi: h3: Sync OTG and HCI nodes from Linux DT
` [U-Boot] [PATCH v10 25/35] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux
` [U-Boot] [PATCH v10 26/35] configs: bananapi-m64: Enable USB OTG peripheral mode
` [U-Boot] [PATCH v10 27/35] ARM: dts: sun8i: a83t: Sync usbphy node from Linux
` [U-Boot] [PATCH v10 28/35] arm64: allwinner: a64: bananapi-m64: Sync usb host nodes "
` [U-Boot] [PATCH v10 29/35] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg "
` [U-Boot] [PATCH v10 30/35] configs: bananapi-m2-plus: Enable USB OTG peripheral mode
` [U-Boot] [PATCH v10 31/35] arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic
` [U-Boot] [PATCH v10 32/35] arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux
` [U-Boot] [PATCH v10 33/35] configs: orangepi-pc2: Enable USB OTG peripheral mode
` [U-Boot] [PATCH v10 34/35] arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux
` [U-Boot] [PATCH v10 35/35] configs: orangepi-prime: Enable USB OTG peripheral mode
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox