messages from 2018-08-19 12:42:41 to 2018-08-20 16:30:31 UTC [more...]
[U-Boot] [PATCH v6 00/31] SPI-NAND support
2018-08-20 16:30 UTC (8+ messages)
` [U-Boot] [PATCH v6 27/31] mtd: move mtdparts_init() declaration
` [U-Boot] [PATCH v6 29/31] cmd: mtd: add 'mtd' command
[U-Boot] [PATCH] ARM: display5: config: Replace hardcoded size of kernel (0x2000) with variable (fitImg_fw_sz)
2018-08-20 15:57 UTC (2+ messages)
[U-Boot] [PATCH] u-boot: align cache flushes in load_elf_image_shdr to line boundaries
2018-08-20 15:46 UTC
[U-Boot] [PATCH v3.1 14/58] musb-new: sunxi: Use CLK and RESET support
2018-08-20 15:41 UTC
[U-Boot] [PATCH v3 00/58] clk: Add Allwinner CLK, RESET support
2018-08-20 15:25 UTC (75+ messages)
` [U-Boot] [PATCH v3 01/58] clk: Add Allwinner A64 CLK driver
` [U-Boot] [PATCH v3 02/58] reset: Add default request ops
` [U-Boot] [PATCH v3 03/58] reset: Add Allwinner RESET driver
` [U-Boot] [PATCH v3 04/58] clk: sunxi: Add Allwinner H3/H5 CLK driver
` [U-Boot] [PATCH v3 05/58] clk: sunxi: Add Allwinner A10/A20 "
` [U-Boot] [PATCH v3 06/58] clk: sunxi: Add Allwinner A10s/A13 "
` [U-Boot] [PATCH v3 07/58] clk: sunxi: Add Allwinner A31 "
` [U-Boot] [PATCH v3 08/58] clk: sunxi: Add Allwinner A23 "
` [U-Boot] [PATCH v3 09/58] clk: sunxi: a23: Add CLK support for A33
` [U-Boot] [PATCH v3 10/58] clk: sunxi: Add Allwinner A83T CLK driver
` [U-Boot] [PATCH v3 11/58] clk: sunxi: Add Allwinner R40 "
` [U-Boot] [PATCH v3 12/58] clk: sunxi: Add Allwinner V3S "
` [U-Boot] [PATCH v3 13/58] sunxi: Enable CLK
` [U-Boot] [PATCH v3 14/58] musb-new: sunxi: Use CLK and RESET support
` [U-Boot] [PATCH v3 15/58] phy: sun4i-usb: "
` [U-Boot] [PATCH v3 16/58] sunxi: usb: Switch to Generic host controllers
` [U-Boot] [PATCH v3 17/58] usb: host: Drop [e-o]hci-sunxi drivers
` [U-Boot] [PATCH v3 18/58] clk: sunxi: Implement AHB bus MMC clocks
` [U-Boot] [PATCH v3 19/58] clk: sunxi: Implement direct "
` [U-Boot] [PATCH v3 20/58] clk: sunxi: Implement AHB bus MMC resets
` [U-Boot] [PATCH v3 21/58] reset: Add get reset by name optionally
` [U-Boot] [PATCH v3 22/58] reset: Add reset valid
` [U-Boot] [PATCH v3 23/58] clk: sunxi: Add Allwinner H6 CLK, RESET driver
` [U-Boot] [PATCH v3 24/58] arm64: allwinner: dts: h6: fix Pine H64 MMC bus width
` [U-Boot] [PATCH v3 25/58] sunxi: h6: Enable CLK, RESET
` [U-Boot] [PATCH v3 26/58] dm: mmc: sunxi: Add CLK and RESET support
` [U-Boot] [PATCH v3 27/58] fastboot: sunxi: Update fastboot mmc default device
` [U-Boot] [PATCH v3 28/58] env: fat: Add func to get fat device, partition
` [U-Boot] [PATCH v3 29/58] sunxi: Get fat device wrt boot device, 'auto' partition
` [U-Boot] [PATCH v3 30/58] env: sunxi: Don't update fat dev, part wrt MMC_SUNXI_SLOT_EXTRA
` [U-Boot] [PATCH v3 31/58] sunxi: Add mmc 2, 3 bootenv devices
` [U-Boot] [PATCH v3 32/58] sunxi: A20: Enable DM_MMC
` [U-Boot] [PATCH v3 33/58] mmc: sunxi: Add mmc, emmc H5/A64 compatible
` [U-Boot] [PATCH v3 34/58] sunxi: H3_H5: Enable DM_MMC
` [U-Boot] [PATCH v3 35/58] sunxi: A64: "
` [U-Boot] [PATCH v3 36/58] mmc: sunxi: Add A83T emmc compatible
` [U-Boot] [PATCH v3 37/58] sunxi: A83T: Enable DM_MMC
` [U-Boot] [PATCH v3 38/58] sunxi: V40: "
` [U-Boot] [PATCH v3 39/58] sunxi: H6: "
` [U-Boot] [PATCH v3 40/58] sunxi: A13/A31: "
` [U-Boot] [PATCH v3 41/58] sunxi: A23/A33/V3S: "
` [U-Boot] [PATCH v3 42/58] clk: sunxi: Implement SPI clocks
` [U-Boot] [PATCH v3 43/58] clk: sunxi: Implement SPI resets
` [U-Boot] [PATCH v3 44/58] spi: sun4i: Add CLK support
` [U-Boot] [PATCH v3 45/58] spi: Add Allwinner A31 SPI driver
` [U-Boot] [PATCH v3 46/58] clk: sunxi: Implement UART clocks
` [U-Boot] [PATCH v3 47/58] clk: sunxi: Implement UART resets
` [U-Boot] [PATCH v3 48/58] clk: sunxi: Implement Ethernet clocks
` [U-Boot] [PATCH v3 49/58] clk: sunxi: Implement Ethernet resets
` [U-Boot] [PATCH v3 50/58] net: sunxi_emac: Add CLK support
` [U-Boot] [PATCH v3 51/58] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle
` [U-Boot] [PATCH v3 52/58] net: sun8i_emac: Add CLK and RESET support
` [U-Boot] [PATCH v3 53/58] clk: Get the CLK by index without device
` [U-Boot] [PATCH v3 54/58] clk: Use clk_get_by_index_tail()
` [U-Boot] [PATCH v3 55/58] reset: Get the RESET by index without device
` [U-Boot] [PATCH v3 56/58] clk: sunxi: h3: Implement EPHY CLK and RESET
` [U-Boot] [PATCH v3 57/58] net: sun8i_emac: Add EPHY CLK and RESET support
` [U-Boot] [PATCH v3 58/58] board: sunxi: gmac: Remove Ethernet clock and reset
[U-Boot] U-Boot RPI bmp display isn't visible
2018-08-20 15:23 UTC
[U-Boot] [PATCH 0/8] Import Undefined Behavior Sanitizer
2018-08-20 15:00 UTC (19+ messages)
` [U-Boot] [PATCH 1/8] UBSAN: run-time undefined behavior sanity checker
` [U-Boot] [PATCH 2/8] mmc: Fix "left shift in type int" undefined behavior
` [U-Boot] [PATCH 3/8] armv8: mmu: "
` [U-Boot] [PATCH 4/8] pinctrl: renesas: "
` [U-Boot] [PATCH 5/8] net: phy: "
` [U-Boot] [PATCH 6/8] net: ravb: "
` [U-Boot] [PATCH 7/8] mmc: Fix read-past-end-of-array "
` [U-Boot] [PATCH 8/8] hashtable: Fix zero-sized array "
[U-Boot] [PATCH v3 00/34] Add support for 1wire protocol and 1wire eeproms
2018-08-20 14:26 UTC (35+ messages)
` [U-Boot] [PATCH v3 01/34] w1: Add 1-Wire uclass
` [U-Boot] [PATCH v3 02/34] w1: Add 1-Wire gpio driver
` [U-Boot] [PATCH v3 03/34] dt-bindings: W1: w1-gpio: added bindings for w1-gpio
` [U-Boot] [PATCH v3 04/34] W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMs
` [U-Boot] [PATCH v3 05/34] w1: identify devices with w1-eeprom uclass
` [U-Boot] [PATCH v3 06/34] W1-EEPROM: add support for Maxim DS24 eeprom families
` [U-Boot] [PATCH v3 07/34] dt-bindings: w1-eeprom: ds24xxx: create bindings
` [U-Boot] [PATCH v3 08/34] W1-EEPROM: add sandbox driver
` [U-Boot] [PATCH v3 09/34] dt-bindings: w1-eeprom: eep_sandbox: create bindings
` [U-Boot] [PATCH v3 10/34] w1: add command for onewire protocol
` [U-Boot] [PATCH v3 11/34] pinctrl: sandbox: add gpio onewire w1 group
` [U-Boot] [PATCH v3 12/34] sandbox: DTS: w1: add node for one wire interface on GPIO
` [U-Boot] [PATCH v3 13/34] configs: sandbox: add onewire w1 and sandbox eeprom
` [U-Boot] [PATCH v3 14/34] configs: sama5d2_xplained: add onewire and eeprom drivers
` [U-Boot] [PATCH v3 15/34] configs: sama5d3_xplained: "
` [U-Boot] [PATCH v3 16/34] configs: sama5d27_som1_ek: "
` [U-Boot] [PATCH v3 17/34] configs: sama5d2_ptc_ek: "
` [U-Boot] [PATCH v3 18/34] configs: sama5d4_xplained: "
` [U-Boot] [PATCH v3 19/34] board: atmel: add support for pda detection
` [U-Boot] [PATCH v3 20/34] board: sama5d2_xplained: add pda detect call at init time
` [U-Boot] [PATCH v3 21/34] board: sama5d3_xplained: "
` [U-Boot] [PATCH v3 22/34] board: sama5d27_som1_ek: "
` [U-Boot] [PATCH v3 23/34] board: sama5d2_ptc_ek: "
` [U-Boot] [PATCH v3 24/34] board: sama5d4_xplained: "
` [U-Boot] [PATCH v3 25/34] configs: sama5d2_xplained: add fdt overlay support
` [U-Boot] [PATCH v3 26/34] configs: sama5d3_xplained: "
` [U-Boot] [PATCH v3 27/34] configs: sama5d2_ptc_ek: "
` [U-Boot] [PATCH v3 28/34] configs: sama5d27_som1_ek: "
` [U-Boot] [PATCH v3 29/34] configs: sama5d4_xplained: "
` [U-Boot] [PATCH v3 30/34] ARM: dts: at91: sama5d2_xplained: add onewire connector for LCD eeprom
` [U-Boot] [PATCH v3 31/34] ARM: dts: at91: sama5d3_xplained: "
` [U-Boot] [PATCH v3 32/34] ARM: dts: at91: sama5d27_som1_ek: "
` [U-Boot] [PATCH v3 33/34] ARM: dts: at91: sama5d2_ptc: "
` [U-Boot] [PATCH v3 34/34] ARM: dts: at91: sama5d4_xplained: "
[U-Boot] [PATCH] ARM: display5: Remove "factory procedure" from display5 board config
2018-08-20 14:23 UTC
[U-Boot] [PATCH v3 00/10] splash screen on the stm32f769 disco board
2018-08-20 14:02 UTC (5+ messages)
` [U-Boot] [PATCH v3 01/10] video: stm32: stm32_ltdc: add bridge to display controller
` [U-Boot] [PATCH v3 02/10] include: Add new DCS commands in the enum list
[U-Boot] [PATCH 0/2] socfpga: cleanup files generated for spl
2018-08-20 13:54 UTC (3+ messages)
` [U-Boot] [PATCH 1/2] spl: socfpga: only gen5 devices and arria10 require sfp image
` [U-Boot] [PATCH 2/2] spl: socfpga: stratix10: add hex file output for spl image
[U-Boot] [PATCH] arm: omap: configs: various: Remove references to OMAP34XX_UARTx
2018-08-20 12:45 UTC (3+ messages)
` [U-Boot] "
[U-Boot] Pull request: u-boot-sunxi/master
2018-08-20 12:44 UTC
[U-Boot] [PATCH] board: sunxi: Remove unused local variables
2018-08-20 12:40 UTC (3+ messages)
[U-Boot] [PATCH 0/3] efi_loader: Fix -fdata-section fallout with bss
2018-08-20 12:32 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] x86: Include bss subsections in linker script
` [U-Boot] [PATCH 2/3] x86: Enable -fdata-sections always
` [U-Boot] [PATCH 3/3] riscv: Include bss subsections in linker script
[U-Boot] [PATCH] sunxi: disable Pine A64 model detection code on non-A64 SoCs
2018-08-20 12:25 UTC (2+ messages)
[U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data
2018-08-20 12:23 UTC (8+ messages)
[U-Boot] [PATCH] dts: mvebu: mcbin: drop redundant SD slot node
2018-08-20 12:12 UTC
[U-Boot] [PATCH v2] Convert CONFIG_BOARD_LATE_INIT to Kconfig
2018-08-20 12:01 UTC (7+ messages)
` [U-Boot] [U-Boot,v2] "
[U-Boot] [PATCH] env: Merge Rockchip, Sunxi, Zynq and ZynqMP
2018-08-20 11:56 UTC (4+ messages)
` [U-Boot] "
[U-Boot] [PATCH] configs: sun7i: Fix to use emmc dts for OLinuXino_MICRO-eMMC
2018-08-20 11:42 UTC (3+ messages)
[U-Boot] [PATCH 1/4] env: fat: drop not needed #ifdef CMD_SAVEENV
2018-08-20 11:20 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] Chain loading U-Boot on ARM v7, data abort
2018-08-20 10:53 UTC (2+ messages)
[U-Boot] [PATCH] u-boot: fixup the iommu-map property of fsl-mc node
2018-08-20 10:31 UTC
[U-Boot] [PATCH v2 0/3] Convert fdtdec_setup_memory_banksize() to use livetree
2018-08-20 9:10 UTC (4+ messages)
` [U-Boot] [PATCH v2 1/3] ofnode: add ofnode_by_prop_value()
` [U-Boot] [PATCH v2 2/3] fdt: fdtdec_setup_memory_banksize() use livetree
` [U-Boot] [PATCH v2 3/3] test: ofnode: test ofnode_by_prop_value()
[U-Boot] [PATCH u-boot 0/3] amlogic: clean up board files
2018-08-20 8:43 UTC (5+ messages)
` [U-Boot] [PATCH u-boot 1/3] boards: amlogic: remove ethernet gpio reset code from boards
` [U-Boot] [PATCH u-boot 2/3] boards: amlogic: use common function for environment initialization
[U-Boot] [PATCH v2 u-boot 0/2] Add the VPU Power Domain support
2018-08-20 8:36 UTC (4+ messages)
` [U-Boot] [PATCH v2 u-boot 1/2] power: domain: Add the VPU Power Domain driver
[U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes
2018-08-20 8:09 UTC (16+ messages)
[U-Boot] sunxi: USB gadget does not work on H2+ after 92a30692b2b18f45aae6fdaae38d67ed03dd2d11
2018-08-20 7:59 UTC (12+ messages)
[U-Boot] [PATCH] arm64: zynqmp: Handle CONFIG_BOARD_LATE_INIT via Kconfig
2018-08-20 7:06 UTC
[U-Boot] [UBOOT PATCH 0/2] dm: core: Scan "/firmware" node by default
2018-08-20 7:04 UTC (6+ messages)
` [U-Boot] [UBOOT PATCH 2/2] "
[U-Boot] [PATCH] dm: test: Fix typo in test-main comment
2018-08-20 6:03 UTC
[U-Boot] Please pull u-boot-x86
2018-08-20 5:59 UTC
[U-Boot] [PATCH 1/6] x86: coreboot: Add generic coreboot payload support
2018-08-20 5:57 UTC (20+ messages)
` [U-Boot] [PATCH 2/6] x86: Remove support for Advantech SOM-6896
` [U-Boot] [PATCH 3/6] x86: dts: Remove coreboot_fb.dtsi
` [U-Boot] [PATCH 4/6] x86: tsc: Try hardware calibration first
` [U-Boot] [PATCH 5/6] x86: coreboot: Add default TSC frequency in the device tree
` [U-Boot] [PATCH 6/6] x86: efi: payload: "
[U-Boot] [PATCH 00/17] fs: fat: extend FAT write operations
2018-08-20 4:45 UTC (4+ messages)
` [U-Boot] [PATCH 03/17] fs: fat: make directory iterator global for write use
[U-Boot] [PATCH] regulator: pbias: Add additional compatible flags
2018-08-20 1:54 UTC
[U-Boot] Disabling CONFIG_DM_I2C_COMPAT in twl4030 PMIC
2018-08-19 23:33 UTC (5+ messages)
[U-Boot] [PATCH 1/2] Configs: am3517_evm: Remove TWL4030 reference
2018-08-19 16:11 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] ARM: am3517_evm: Disable DM_I2C_COMPAT
[U-Boot] [PATCH 00/10] AVB using OP-TEE
2018-08-19 12:42 UTC (4+ messages)
` [U-Boot] [PATCH 09/10] tee: optee: support AVB trusted application
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox