messages from 2018-08-26 17:23:23 to 2018-08-28 14:49:41 UTC [more...]
[U-Boot] [PATCH v3] usb: dwc2: Add reset ctrl to driver
2018-08-28 16:08 UTC (2+ messages)
[U-Boot] [PATCH v3 1/2] gpio: Add struct reset_ctl_bulk
2018-08-28 16:07 UTC (4+ messages)
` [U-Boot] [PATCH v3 2/2] gpio: dwapb_gpio: Add reset ctrl to driver
[U-Boot] [PATCH v2 0/8] Device tree support for Powerpc in u-boot
2018-08-28 14:49 UTC (19+ messages)
` [U-Boot] [PATCH v2 1/8] powerpc/dts: Define '_end' symbol in mpc85xx u-boot lds files
` [U-Boot] [PATCH v2 2/8] powerpc/dts: Makefile changes to clean and build dts
` [U-Boot] [PATCH v2 3/8] binman: Add a new "skip-at-start" property in Section class
` [U-Boot] [PATCH v2 4/8] binman: Add support for Powerpc mpc85xx 'bootpg + resetvec' entry
` [U-Boot] [PATCH v2 5/8] powerpc: mpc85xx: Select BINMAN by default
` [U-Boot] [PATCH v2 6/8] powerpc: mpc85xx: Use binman to embed dtb inside u-boot
` [U-Boot] [PATCH v2 7/8] powerpc: dts: Add u-boot.dtsi to use binman for MPC85xx boards
` [U-Boot] [PATCH v2 8/8] powerpc: dts: Enable device tree support for T2080QDS
[U-Boot] [PATCH] TPL/SPL: add separate CONFIG_TPL_FRAMEWORK for TPL
2018-08-28 13:11 UTC (3+ messages)
[U-Boot] [PATCH] rockchip: dts: fix unnecessary '-cells' warning
2018-08-28 11:14 UTC (2+ messages)
[U-Boot] [PATCH v3 00/58] clk: Add Allwinner CLK, RESET support
2018-08-28 9:51 UTC (10+ messages)
` [U-Boot] [PATCH v3 19/58] clk: sunxi: Implement direct MMC clocks
` [U-Boot] [PATCH v3 27/58] fastboot: sunxi: Update fastboot mmc default device
[U-Boot] [PATCH] rockchip: add TPL_TINY_FRAMEWORK support
2018-08-28 9:23 UTC
[U-Boot] [PATCH 00/25] [2/3] Initial support Texas Instrument's AM654 Platform
2018-08-28 9:12 UTC (10+ messages)
` [U-Boot] [PATCH 11/25] clk: Allow clock defaults to be set also during re-reloc state
[U-Boot] [PATCH v2 00/13] Import Undefined Behavior Sanitizer
2018-08-28 8:14 UTC (24+ messages)
` [U-Boot] [PATCH v2 01/13] UBSAN: run-time undefined behavior sanity checker
` [U-Boot] [PATCH v2 02/13] mmc: Fix signed shift overflow
` [U-Boot] [PATCH v2 03/13] armv8: mmu: "
` [U-Boot] [PATCH v2 04/13] pinctrl: renesas: "
` [U-Boot] [PATCH v2 05/13] net: phy: "
` [U-Boot] [PATCH v2 06/13] net: ravb: "
` [U-Boot] [PATCH v2 07/13] x86: Fix signed shift overflow in MSR_IA32_APICBASE_BASE
` [U-Boot] [PATCH v2 08/13] disk: part_dos: Fix signed shift overflow
` [U-Boot] [PATCH v2 09/13] common.h: Fix signed shift overflow in cpumask_next()
` [U-Boot] [PATCH v2 10/13] mmc: Fix read-past-end-of-array
` [U-Boot] [PATCH v2 11/13] hashtable: Fix zero-sized array
` [U-Boot] [PATCH v2 12/13] input: "
` [U-Boot] [PATCH v2 13/13] configs: sandbox*: Enable UBSAN
[U-Boot] u-boot release and feature set
2018-08-28 6:48 UTC
[U-Boot] [PATCH v4 0/3] Expand dp83867-driver
2018-08-28 6:25 UTC (4+ messages)
` [U-Boot] [PATCH v4 1/3] net: phy: ti: Add lane swapping support in the DP83867 TI's PHY driver
` [U-Boot] [PATCH v4 2/3] net: phy: ti: Recover from "port mirroring" N/A MODE4
` [U-Boot] [PATCH v4 3/3] net: phy: ti: Add binding for the CLK_OUT pin muxing
[U-Boot] [PATCH v4 0/7] Add ethernet support for phyCORE-RK3288
2018-08-28 6:25 UTC (8+ messages)
` [U-Boot] [PATCH v4 1/7] arch: arm: mach-rockchip: rk3288: Enable regulators in board_init
` [U-Boot] [PATCH v4 2/7] config: phycore-rk3288_defconfig: add PHY_TI
` [U-Boot] [PATCH v4 3/7] drivers: net: designware: Add reading of DT phy-handle node
` [U-Boot] [PATCH v4 4/7] ARM: dts: rockchip: ADD dp83867 CLK_OUT muxing
` [U-Boot] [PATCH v4 5/7] rockchip: rk3288-phycore: set flash1 iodomain to 1.8V
` [U-Boot] [PATCH v4 6/7] net: gmac_rockchip: Fix a register write in rk3328_gmac_set_to_rgmii
` [U-Boot] [PATCH v4 7/7] net: gmac_rockchip: Add handeling for RGMII_ID/RXID/TXID
[U-Boot] [PATCH 00/10] AVB using OP-TEE
2018-08-28 6:11 UTC (5+ messages)
[U-Boot] [PATCH 0/8][RESEND] Device Tree support for PowerPC in u-boot
2018-08-28 3:44 UTC (4+ messages)
` [U-Boot] [PATCH 8/8][RESEND] powerpc: dts: Enable device tree support for T2080QDS
[U-Boot] [PATCH v3] serial: omap: Introduce DM specific omap serial
2018-08-28 3:28 UTC (3+ messages)
[U-Boot] [PATCH v8 1/8] ppa/fm/qe: use block layer in ppa/fm/qe driver
2018-08-28 2:52 UTC (8+ messages)
` [U-Boot] [PATCH v8 2/8] armv8/ls1088a/ls2088a: esdhc: Add esdhc clock support
` [U-Boot] [PATCH v8 3/8] armv8: ls2088a: add eSDHC node
` [U-Boot] [PATCH v8 4/8] armv8: ls1088a: "
` [U-Boot] [PATCH v8 5/8] armv8: ls1043a: "
` [U-Boot] [PATCH v8 6/8] armv8: ls1046a: "
` [U-Boot] [PATCH v8 7/8] armv7: ls1021a: enable esdhc
` [U-Boot] [PATCH v8 8/8] Enable CONFIG_BLK and CONFIG_DM_MMC to Kconfig
[U-Boot] [PATCH 1/2] Configs: am3517_evm: Remove TWL4030 reference
2018-08-28 2:27 UTC (3+ messages)
` [U-Boot] [PATCH 2/2] ARM: am3517_evm: Disable DM_I2C_COMPAT
[U-Boot] [PATCH 0/2] socfpga: cleanup files generated for spl
2018-08-27 23:54 UTC (9+ messages)
` [U-Boot] [PATCH 2/2] spl: socfpga: stratix10: add hex file output for spl image
[U-Boot] [PATCH 1/1] test: fix typo in cmd_ut_category() description
2018-08-27 20:04 UTC
[U-Boot] [PATCH v4 00/17] clk: Add Allwinner CLK, RESET support
2018-08-27 15:04 UTC (29+ messages)
` [U-Boot] [PATCH v4 01/17] clk: Add Allwinner A64 CLK driver
` [U-Boot] [PATCH v4 03/17] reset: Add Allwinner RESET driver
` [U-Boot] [PATCH v4 04/17] clk: sunxi: Add Allwinner H3/H5 CLK driver
` [U-Boot] [PATCH v4 05/17] clk: sunxi: Add Allwinner A10/A20 "
` [U-Boot] [PATCH v4 06/17] clk: sunxi: Add Allwinner A10s/A13 "
` [U-Boot] [PATCH v4 07/17] clk: sunxi: Add Allwinner A31 "
` [U-Boot] [PATCH v4 08/17] clk: sunxi: Add Allwinner A23 "
` [U-Boot] [PATCH v4 09/17] clk: sunxi: a23: Add CLK support for A33
` [U-Boot] [PATCH v4 10/17] clk: sunxi: Add Allwinner A83T CLK driver
` [U-Boot] [PATCH v4 11/17] clk: sunxi: Add Allwinner R40 "
` [U-Boot] [PATCH v4 12/17] clk: sunxi: Add Allwinner V3S "
` [U-Boot] [PATCH v4 14/17] phy: sun4i-usb: Use CLK and RESET support
` [U-Boot] [PATCH v4 16/17] sunxi: usb: Switch to Generic host controllers
` [U-Boot] [PATCH v4 17/17] usb: host: Drop [e-o]hci-sunxi drivers
[U-Boot] [PATCH 0/4] NXP LS1043A SMMU enabling patches
2018-08-27 14:34 UTC (5+ messages)
` [U-Boot] [PATCH 1/4] armv8: fsl-layerscape: add missing qe base address define
` [U-Boot] [PATCH 2/4] armv8: ls1043a: advertise QMan v3 in configuration
` [U-Boot] [PATCH 3/4] armv8: ls1043a: add icid setup support
` [U-Boot] [PATCH 4/4] armv8: ls1043a: enable icid setup for qman portals
[U-Boot] [PATCH v2 00/24] [2/3] Initial support Texas Instrument's AM654 Platform
2018-08-27 14:13 UTC (26+ messages)
` [U-Boot] [PATCH v2 01/24] firmware: Add basic support for TI System Control Interface (TI SCI) protocol
` [U-Boot] [PATCH v2 02/24] firmware: ti_sci: Add support for board configuration
` [U-Boot] [PATCH v2 03/24] firmware: ti_sci: Add support for device control
` [U-Boot] [PATCH v2 04/24] firmware: ti_sci: Add support for clock control
` [U-Boot] [PATCH v2 05/24] firmware: ti_sci: Add support for reboot core service
` [U-Boot] [PATCH v2 06/24] firmware: ti_sci: Add support for processor control services
` [U-Boot] [PATCH v2 07/24] dm: firmware: Automatically bind child devices
` [U-Boot] [PATCH v2 08/24] dm: reset: Update uclass to allow querying reset status
` [U-Boot] [PATCH v2 09/24] reset: Extend reset control with an optional data field
` [U-Boot] [PATCH v2 10/24] reset: Introduce TI System Control Interface (TI SCI) reset driver
` [U-Boot] [PATCH v2 11/24] clk: Extend clock control with an optional data field
` [U-Boot] [PATCH v2 12/24] clk: Introduce TI System Control Interface (TI SCI) clock driver
` [U-Boot] [PATCH v2 13/24] power domain: Add support for multiple powerdomains per device
` [U-Boot] [PATCH v2 14/24] power domain: Introduce TI System Control Interface (TI SCI) power domain driver
` [U-Boot] [PATCH v2 15/24] sysreset: Add TI System Control Interface (TI SCI) sysreset driver
` [U-Boot] [PATCH v2 16/24] mailbox: Allow attaching private data for mbox_chan
` [U-Boot] [PATCH v2 17/24] mailbox: Introduce K3 Secure Proxy Driver
` [U-Boot] [PATCH v2 18/24] spl: Allow mailbox drivers to be used within SPL
` [U-Boot] [PATCH v2 19/24] remoteproc: Allow for individual remoteproc initialization
` [U-Boot] [PATCH v2 20/24] remoteproc: Introduce K3 system controller
` [U-Boot] [PATCH v2 21/24] remoteproc: Introduce K3 remoteproc driver
` [U-Boot] [PATCH v2 22/24] spl: Allow remoteproc drivers to be used within SPL
` [U-Boot] [PATCH v2 23/24] mmc: k3_arasan: Add sdhci driver support for K3 family SoCs
` [U-Boot] [PATCH v2 24/24] gpio: do not include <asm/arch/gpio.h> for ARCH_K3
[U-Boot] [PATCH v2 0/8] [1/3] Initial support Texas Instrument's AM654 Platform
2018-08-27 14:12 UTC (14+ messages)
` [U-Boot] [PATCH v2 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs
` [U-Boot] [PATCH v2 2/8] arm: K3: Add support for AM654 SoC definition
` [U-Boot] [PATCH v2 3/8] arm: K3: Update _start instruction
` [U-Boot] [PATCH v2 4/8] arm: K3: am654: Add support for boot device detection
` [U-Boot] [PATCH v2 5/8] arm: K3: am654: Unlock control module registers during init
` [U-Boot] [PATCH v2 6/8] armv8: K3: am654: Add custom MMU support
` [U-Boot] [PATCH v2 7/8] armv8: K3: am654: Introduce FIT generator script
` [U-Boot] [PATCH v2 8/8] armv8: K3: am654: Add support for generating build targets
[U-Boot] [PATCH v2 0/5] [3/3] Initial support Texas Instrument's AM654 Platform
2018-08-27 10:29 UTC (6+ messages)
` [U-Boot] [PATCH v2 1/5] board: ti: am654: a53: Add initial support for am654
` [U-Boot] [PATCH v2 2/5] include: am654_evm: Establish initial environment for SD card boot
` [U-Boot] [PATCH v2 3/5] arm64: dts: k3: Add Support for AM654 SoC
` [U-Boot] [PATCH v2 4/5] arm64: dts: k3: Add u-boot specific nodes
` [U-Boot] [PATCH v2 5/5] configs: am65x_evm_a53: Add initial support
[U-Boot] [PATCH v2] serial: omap: Introduce DM specific omap serial
2018-08-27 10:17 UTC (3+ messages)
[U-Boot] [PATCH 0/8] [1/3] Initial support Texas Instrument's AM654 Platform
2018-08-27 10:07 UTC (5+ messages)
[U-Boot] [PATCH] phy: Add 25G_AUI, XLAUI, CAUI2, CAUI4 related macros
2018-08-27 9:45 UTC
[U-Boot] [PATCH] env: common: load read-only variables after reset
2018-08-27 9:01 UTC (2+ messages)
[U-Boot] [PATCH 00/15] efi_loader: EFI_UNICODE_COLLATION_PROTOCOL
2018-08-27 8:37 UTC (38+ messages)
` [U-Boot] [PATCH 01/15] lib: build charset.o only if needed
` [U-Boot] [PATCH 02/15] efi_loader: rename utf16_strlen, utf16_strnlen
` [U-Boot] [PATCH 03/15] lib: charset: utility functions for Unicode
` [U-Boot] [PATCH 04/15] test: unit tests for Unicode functions
` [U-Boot] [PATCH 05/15] lib: vsprintf: correct printing of Unicode strings
` [U-Boot] [PATCH 06/15] test: test printing Unicode
` [U-Boot] [PATCH 07/15] efi_loader: remove limit on variable length
` [U-Boot] [PATCH 08/15] efi_loader: don't use unlimited stack as buffer
` [U-Boot] [PATCH 09/15] efi_loader: buffer size for load options
` [U-Boot] [PATCH 11/15] efi_loader: capitalization table
` [U-Boot] [PATCH 14/15] efi_loader: EFI_UNICODE_COLLATION_PROTOCOL
[U-Boot] [PATCH v2 1/2] Revert "arm: mvebu: fix boot from UART when in fallback mode"
2018-08-27 7:41 UTC (4+ messages)
` [U-Boot] [PATCH v2 2/2] ARM: mach-mvebu: handle fall-back to UART boot
[U-Boot] [PATCH] armv8:fsl-layerscape: Add support for Chassis 3.2
2018-08-27 7:35 UTC
[U-Boot] [PATCH][v3] driver: net: fsl-mc: Memset MC reserve ram memory before usage
2018-08-27 7:28 UTC
[U-Boot] [PATCH][v2] driver: net: fsl-mc: Memset MC reserve ram memory before usage
2018-08-27 6:12 UTC
[U-Boot] mtd: spi: Full DM conversion timeline
2018-08-27 5:57 UTC
[U-Boot] [PATCH] cmd: ubi: change 'default y' for SUNXI to 'imply' in Kconfig
2018-08-26 21:01 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] configs: am57xx: change default board name to beagle_x15
2018-08-26 21:01 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] GPIO: omap_gpio: Fix gpio name names with device tree
2018-08-26 19:54 UTC (2+ messages)
[U-Boot] [PATCH v9 00/18] efi: Enable sandbox support for EFI loader
2018-08-26 18:27 UTC (5+ messages)
` [U-Boot] [PATCH v9 16/18] efi: Add more debugging for memory allocations
[U-Boot] [PATCH v9 15/18] efi: sandbox: Tidy up copy_fdt() to work with sandbox
2018-08-26 17:23 UTC (2+ messages)
` [U-Boot] [U-Boot, v9, "
[U-Boot] [PATCH v9 17/18] efi_loader: Pass address to fs_read()
2018-08-26 17:23 UTC (2+ messages)
` [U-Boot] [U-Boot, v9, "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox