messages from 2018-10-22 02:39:51 to 2018-10-22 21:02:22 UTC [more...]
[U-Boot] [PATCH] net: fec_mxc: fix phy-reset-gpios logic
2018-10-22 21:02 UTC (2+ messages)
[U-Boot] [PATCH 0/4] net: dm: fec: Fixes and improvements
2018-10-22 20:56 UTC (9+ messages)
` [U-Boot] [PATCH 1/4] net: dm: fec: Fix time unit error in phy-reset-duration
` [U-Boot] [PATCH 2/4] net: dm: fec: Fix phy-reset-duration clamping and defaults
` [U-Boot] [PATCH 3/4] net: dm: fec: Support the phy-supply binding
` [U-Boot] [PATCH 4/4] net: dm: fec: Obtain the transceiver type from the DT
[U-Boot] [PATCH 27/45] binman: Add a test for Intel reference code
2018-10-22 20:54 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] Please pull u-boot-x86
2018-10-22 20:54 UTC (5+ messages)
[U-Boot] socfpga cyclone5 dts
2018-10-22 20:48 UTC (6+ messages)
[U-Boot] [PATCH] miiphy: Add function to retrieve MDIO bus list head
2018-10-22 20:47 UTC (2+ messages)
[U-Boot] [PATCH] cmd: mii: don't check address for 'device' subcommand
2018-10-22 20:41 UTC (2+ messages)
[U-Boot] [PATCH v2] net: phy: add TSE PCS support to dwmac-socfpga
2018-10-22 20:39 UTC (2+ messages)
[U-Boot] [PATCH v4 00/13] Support for the Faraday ftgmac100 controller
2018-10-22 20:07 UTC (7+ messages)
` [U-Boot] [PATCH v4 03/13] net: ftgmac100: convert to driver model
` [U-Boot] [PATCH v4 07/13] net: ftgmac100: handle timeouts when transmitting
` [U-Boot] [PATCH v4 11/13] aspeed: Update ast2500 SoC DTS file to Linux v4.17-rc6 level
[U-Boot] [PATCH] ARM: mvebu: dts: add Clearfog GT-8K
2018-10-22 19:59 UTC (5+ messages)
[U-Boot] [PATCH 1/4] nfs: convert supported_nfs_versions bitfield to an enum
2018-10-22 19:39 UTC (5+ messages)
[U-Boot] [PATCH v2] net: Add MT76xx ethernet driver
2018-10-22 19:36 UTC (4+ messages)
[U-Boot] [PATCH v3 6/6] driver: net: fsl-mc: Add support of multiple phys for dpmac
2018-10-22 19:28 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v3 5/6] driver: net: fsl-mc: initialize dpmac irrespective of phy
2018-10-22 19:28 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v3 4/6] driver: net: fsl-mc: Modify the dpmac link detection method
2018-10-22 19:28 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v3 3/6] driver: net: fsl-mc: fix error handing in init_phy
2018-10-22 19:28 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v3 2/6] driver: net: fsl-mc: remove unused strcture elements
2018-10-22 19:28 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v3 1/6] driver: net: fsl-mc: modify the label name
2018-10-22 19:28 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] x86: make the LAPIC / IOAPIC construct switchable with Kconfig
2018-10-22 19:02 UTC
[U-Boot] [RFC] fit: include uncompression into fit_image_load
2018-10-22 18:55 UTC (7+ messages)
[U-Boot] Pull request: u-boot-staging
2018-10-22 18:39 UTC (5+ messages)
[U-Boot] [PATCH 1/3] pwm: sunxi: fix off-by-one that prevented PWM to use prescaler bypass
2018-10-22 18:35 UTC (4+ messages)
` [U-Boot] [PATCH 3/3] pwm: sunxi: choose best prescaler to improve PWM resolution
[U-Boot] [PATCH v11 0/6] efi_loader: Code refactoring and improvement
2018-10-22 18:32 UTC (7+ messages)
` [U-Boot] [PATCH v11 3/6] sandbox: smbios: Update to support sandbox
[U-Boot] [PATCH v3 0/5] Add support for Pinebook
2018-10-22 18:22 UTC (3+ messages)
` [U-Boot] [PATCH v3 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC
[U-Boot] [PATCH] syscon: reset node list syscon_list after relocation
2018-10-22 18:10 UTC (3+ messages)
[U-Boot] [PATCH 1/1] efi_selftest: do not write to linker generated array
2018-10-22 17:49 UTC (2+ messages)
[U-Boot] [PATCH 0/4] Add adc uclass's channel mask and conversion helpers and enhance adc cmd
2018-10-22 17:49 UTC (5+ messages)
` [U-Boot] [PATCH 2/4] cmd: adc: add info on channel mask
[U-Boot] [PATCH] arm: ti: boot: Remove environment partition
2018-10-22 17:25 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] watchdog: aspeed: restore default value of reset_mask
2018-10-22 17:25 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] ARM: omap3_logic: Add NOR Flash Support for SOM-LV
2018-10-22 17:25 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] arm: udoo: Convert to distro config
2018-10-22 17:25 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH 1/1] test: overlay: add missing include
2018-10-22 17:25 UTC (2+ messages)
` [U-Boot] [U-Boot,1/1] "
[U-Boot] [PATCH] nand: atmel: Initialize pmecc smu with correct size
2018-10-22 17:25 UTC (4+ messages)
` [U-Boot] "
[U-Boot] [PATCH 2/2] configs: sama5d2_ptc_ek: add default bootargs for MMC defconfig
2018-10-22 17:25 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 1/2] configs: sama5d2_ptc_ek: add default bootargs for NAND defconfig
2018-10-22 17:25 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH] configs: sama5d2_xplained: enable w1 and overlay for emmc defconfig
2018-10-22 17:25 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] configs: sama5d27_som1_ek: enable w1 and overlay for mmc1 defconfig
2018-10-22 17:25 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] configs: at91: sama5: enable CMD_IMI
2018-10-22 17:25 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] configs: at91: sam9x5: added FIT and iminfo support
2018-10-22 17:25 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] board: at91sam9x5: add environment var for cpu type
2018-10-22 17:25 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] ARM: omap3logic: Fix MMC name
2018-10-22 17:25 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] ARM: omap3logic: Specify DM serial driver as omap_serial
2018-10-22 17:24 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] ARM: omap3logic: Encapsulate the MUSB functions in check for DM
2018-10-22 17:24 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] ARM: omap3_logic.c: Optimize DDR timings based on OMAP35 or 36/37
2018-10-22 17:24 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH V2] ARM: da850evm_direct_nor: Remove DM_I2C_COMPAT
2018-10-22 17:24 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH] w1: fix build without CONFIG_W1_EEPROM
2018-10-22 16:51 UTC
[U-Boot] [PATCH v3 00/19] DM_I2C_COMPAT removal for all ti platforms
2018-10-22 16:44 UTC (35+ messages)
` [U-Boot] [PATCH v3 01/19] cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT
` [U-Boot] [PATCH v3 02/19] dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected
` [U-Boot] [PATCH v3 03/19] dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROL
` [U-Boot] [PATCH v3 04/19] configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIAS
` [U-Boot] [PATCH v3 05/19] i2c: omap24xx_i2c: Move away from SoC specific headers for reg offset
` [U-Boot] [PATCH v3 06/19] i2c: omap24xx_i2c: Use platdata to probe the device
` [U-Boot] [PATCH v3 07/19] am335x: Register the I2C controllers if DM_I2C is used
` [U-Boot] [PATCH v3 08/19] dts: am43x: omap5: Add node for I2C in SPL
` [U-Boot] [PATCH v3 09/19] omap: detect the board after DM is available
` [U-Boot] [PATCH v3 10/19] power: make most tps drivers and the twl4030 driver compatible with DM_I2C
` [U-Boot] [PATCH v3 11/19] ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT
` [U-Boot] [PATCH v3 12/19] configs: am335x_pdu001: remove CONFIG_DM_I2C_COMPAT
` [U-Boot] [PATCH v3 13/19] ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL
` [U-Boot] [PATCH v3 14/19] am57xx: remove non-DM I2C code
` [U-Boot] [PATCH v3 15/19] configs: dra7xx-evm: increase the size of the malloc's pool before relocation
` [U-Boot] [PATCH v3 16/19] lib: fdtdec: Add function re-setup the fdt more effeciently
` [U-Boot] [PATCH v3 17/19] drivers: core: Add the option SPL_DM_DEVICE_REMOVE to the Kconfig
` [U-Boot] [PATCH v3 18/19] drivers: core: nullify gd->dm_root after dm_uninit()
` [U-Boot] [PATCH v3 19/19] dra7: Allow selecting a new dtb after board detection
[U-Boot] [PATCH] configs: add SolidRun Clearfog GT 8K
2018-10-22 16:42 UTC
[U-Boot] [PATCH] w1-eeprom: ds24xxx: fix data abort in ds24xxx_probe()
2018-10-22 16:31 UTC (2+ messages)
` [U-Boot] [PATCH] w1: fix data abort if no one wire bus master present
[U-Boot] [PATCH v4 00/27] TF-A Boot support for NXP Chassis 2 platforms
2018-10-22 16:27 UTC (4+ messages)
` [U-Boot] [PATCH v4 18/27] drivers: qe: add TFABOOT support
[U-Boot] [PATCH v3 0/8] Improvements for the dwc3_generic driver
2018-10-22 16:24 UTC (10+ messages)
[U-Boot] Regression: vf610twr build error
2018-10-22 16:05 UTC
[U-Boot] Compile error with CONFIG_MULTI_DTB_FIT and not SPL
2018-10-22 15:01 UTC (2+ messages)
[U-Boot] [PATCH 1/2] net: mvpp2: fix polarity of PHY reset signal
2018-10-22 14:07 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] net: mvpp2: increase PHY reset pulse
[U-Boot] [PATCH 00/10] arm: am654: Add r5 support for am654-evm
2018-10-22 13:07 UTC (21+ messages)
` [U-Boot] [PATCH 01/10] ram: Introduce K3 AM654 DDR Sub System driver
` [U-Boot] [PATCH 02/10] armv7R: K3: am654: Enable MPU regions
` [U-Boot] [PATCH 03/10] armv7R: K3: am654: Add support for generating build targets
` [U-Boot] [PATCH 04/10] armv7R: K3: am654: Add support to start ATF from R5 SPL
` [U-Boot] [PATCH 05/10] armv7R: K3: am654: Add support for triggering ddr init from SPL
` [U-Boot] [PATCH 06/10] board: ti: am654: r5: Add initial support for am654
` [U-Boot] [PATCH 07/10] arm: dts: k3: Sync dts from Linux
` [U-Boot] [PATCH 08/10] armv7r: dts: am654: Add initial support
` [U-Boot] [PATCH 09/10] configs: am65x_evm_r5: "
` [U-Boot] [PATCH 10/10] board: ti: am65x: Update README to add R5 build support
[U-Boot] [PATCH] i2c: imx_lpi2c: fix typo and register base address format
2018-10-22 13:04 UTC (3+ messages)
[U-Boot] [PATCH 0/7] Restructure the i.MX U-Boot documentation
2018-10-22 12:25 UTC (2+ messages)
[U-Boot] [PATCH] arm: mvebu: Move PCI(e) MBUS window to end of RAM
2018-10-22 12:21 UTC
[U-Boot] [PATCH 1/4] x86: BayTrail: southcluster.asl: Change PCI 64 bit address range / region
2018-10-22 12:07 UTC (4+ messages)
` [U-Boot] [PATCH 2/4] x86: theadorable-x86-common: Change pci hotplug cmdline parameters (again)
` [U-Boot] [PATCH 3/4] x86: theadorable-x86: Generate and pass root=PARTUUID instead of /dev/sdaX
` [U-Boot] [PATCH 4/4] x86: theadorable-x86-xxx_defconfig: Move VGA BIOS to make room for U-Boot
[U-Boot] Please pull u-boot-dm
2018-10-22 11:11 UTC (12+ messages)
[U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support
2018-10-22 10:16 UTC (5+ messages)
[U-Boot] [PATCH v2 00/14] x86: Bring qemu-x86_64 target in travis-ci build/testing
2018-10-22 9:53 UTC (2+ messages)
[U-Boot] [PATCH] x86/bootm: fix error handling in boot_prep_linux(...)
2018-10-22 9:50 UTC (3+ messages)
[U-Boot] [RFC PATCH 0/3] sunxi: extend SPL header to propagate DRAM size
2018-10-22 9:42 UTC (4+ messages)
` [U-Boot] [linux-sunxi] "
[U-Boot] [PATCH 00/30] General fixes / cleanup for RISC-V and improvements to qemu-riscv
2018-10-22 9:37 UTC (60+ messages)
` [U-Boot] [PATCH 01/30] tools: .gitignore: add prelink-riscv
` [U-Boot] [PATCH 02/30] riscv: ignore device tree binaries
` [U-Boot] [PATCH 03/30] dts: riscv: update makefile to also clean the RISC-V dts directory
` [U-Boot] [PATCH 04/30] riscv: rename CPU_RISCV_32/64 to match architecture names ARCH_RV32I/64I
` [U-Boot] [PATCH 05/30] riscv: select CONFIG_PHYS_64BIT on RV64I systems
` [U-Boot] [PATCH 06/30] riscv: add Kconfig entries for the C and A ISA extensions
` [U-Boot] [PATCH 07/30] riscv: set -march and -mabi based on the Kconfig configuration
` [U-Boot] [PATCH 08/30] riscv: add Kconfig entries for the code model
` [U-Boot] [PATCH 09/30] riscv: move target selection into separate file
` [U-Boot] [PATCH 10/30] riscv: enable -fdata-sections
` [U-Boot] [PATCH 11/30] riscv: fix use of incorrectly sized variables
` [U-Boot] [PATCH 12/30] riscv: make use of the barrier functions from Linux
` [U-Boot] [PATCH 13/30] riscv: do not reimplement generic io functions
` [U-Boot] [PATCH 14/30] riscv: complete the list of exception codes
` [U-Boot] [PATCH 15/30] riscv: treat undefined exception codes as reserved
` [U-Boot] [PATCH 16/30] riscv: hang on unhandled exceptions
` [U-Boot] [PATCH 17/30] riscv: implement the invalidate_icache_* functions
` [U-Boot] [PATCH 19/30] riscv: fix inconsistent use of spaces and tabs in start.S
` [U-Boot] [PATCH 20/30] riscv: align mtvec on a 4-byte boundary
` [U-Boot] [PATCH 21/30] riscv: remove CONFIG_INIT_CRITICAL
` [U-Boot] [PATCH 22/30] riscv: remove unused labels in start.S
` [U-Boot] [PATCH 23/30] riscv: do not blindly modify the mstatus CSR
` [U-Boot] [PATCH 24/30] riscv: save hart ID and device tree passed by prior boot stage
` [U-Boot] [PATCH 25/30] riscv: qemu: use "
` [U-Boot] [PATCH 26/30] bdinfo: riscv: print fdt_blob address
` [U-Boot] [PATCH 27/30] riscv: qemu: support booting Linux
` [U-Boot] [PATCH 28/30] riscv: align bootm implementation with that of other architectures
` [U-Boot] [PATCH 29/30] dm: core: add missing prototype for ofnode_read_u64
` [U-Boot] [PATCH 30/30] riscv: qemu: detect and boot the kernel passed by QEMU
[U-Boot] [PATCH] riscv: cache: Implement i/dcache [status, enable, disable]
2018-10-22 8:16 UTC
[U-Boot] [PATCH v2 0/3] efi_loader: improve boot sequence in distro_bootcmd
2018-10-22 7:42 UTC (6+ messages)
` [U-Boot] [PATCH v2 1/3] efi_loader: rework fdt handling in distro boot script
` [U-Boot] [PATCH v2 2/3] ARM: qemu-arm: rework Kconfig
` [U-Boot] [PATCH v2 3/3] ARM: qemu-arm: define fdt_addr_r
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode)
2018-10-22 7:14 UTC (2+ messages)
[U-Boot] [PATCH 0/6] efi: make efi and bootmgr more usable
2018-10-22 6:58 UTC (12+ messages)
` [U-Boot] [PATCH 3/6] efi_loader: bootmgr: add load option helper functions
` [U-Boot] [PATCH 6/6] efi_loader: bootmgr: run an EFI application of a given load option
[U-Boot] [PATCH] arm: qemu: rework Kconfig
2018-10-22 5:05 UTC (4+ messages)
[U-Boot] [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value
2018-10-22 4:11 UTC (6+ messages)
[U-Boot] [PATCH 1/3] scsi: ceva: add ls2080a soc support
2018-10-22 2:43 UTC (3+ messages)
` [U-Boot] [PATCH 2/3] armv8: dts: fsl-ls2080a: add sata node support
` [U-Boot] [PATCH 3/3] arm64: ls2080a: enable DM support for sata
[U-Boot] [PATCH 1/3] scsi: ceva: add ls1088a soc support
2018-10-22 2:39 UTC (2+ messages)
` [U-Boot] [PATCH 3/3] arm64: ls1088a: enable DM support for sata
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox