messages from 2018-12-31 11:27:40 to 2019-01-03 05:07:05 UTC [more...]
[U-Boot] [PATCH 0/6] Add support for loading FPGA bitstream
2019-01-03 5:07 UTC (28+ messages)
` [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
` [U-Boot] [PATCH 2/6] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
` [U-Boot] [PATCH 3/6] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
` [U-Boot] [PATCH 5/6] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
` [U-Boot] [PATCH 6/6] ARM: socfpga: Synchronize the configuration for A10 SoCDK
[U-Boot] [PATCH 0/2] update TFABOOT defconfigs for SD boot support
2019-01-03 4:37 UTC (3+ messages)
` [U-Boot] [PATCH 1/2] env: fix allow to build multiple environments
` [U-Boot] [PATCH 2/2] configs: update TFABOOT defconfigs for SD boot support
[U-Boot] Booting on RK3399
2019-01-03 3:37 UTC (3+ messages)
[U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
2019-01-03 2:36 UTC
[U-Boot] [PATCH 0/8] Convert i.MX7 WaRP7 ports to DM
2019-01-03 1:44 UTC (9+ messages)
` [U-Boot] [PATCH 1/8] arm: dts: imx7s-warp: Import Linux warp7 dts
` [U-Boot] [PATCH 2/8] arm: imx7s-warp: Add DT file hooks
` [U-Boot] [PATCH 3/8] arm: imx7s-warp: Convert to DM MMC initialization
` [U-Boot] [PATCH 4/8] arm: dts: imx7s-warp: Create alias for mmc0 to &usdhc3
` [U-Boot] [PATCH 5/8] warp7: defconfig: Switch on IMX7 pinctrl for both ports
` [U-Boot] [PATCH 6/8] warp7: defconfig: Switch on DM GPIO for both warp7 ports
` [U-Boot] [PATCH 7/8] warp7: defconfig: Switch to DM for I2C
` [U-Boot] [PATCH 8/8] arm: imx7s-warp: Convert to DM PMIC
[U-Boot] [PATCH 0/6] Small fixes for RISC-V
2019-01-03 0:48 UTC (5+ messages)
` [U-Boot] [PATCH 2/6] riscv: remove invalid dcache flush implementation
[U-Boot] [PATCH] bmips: fix config warnings from 2019.01
2019-01-02 22:14 UTC (6+ messages)
[U-Boot] [PATCH v9 00/10] Fix CVE-2018-18440 and CVE-2018-18439
2019-01-02 22:05 UTC (3+ messages)
` [U-Boot] [PATCH v9 09/10] tftp: prevent overwriting reserved memory
[U-Boot] [PATCH] net: phy: Add clause 45 identifier to phy_device
2019-01-02 21:58 UTC (2+ messages)
[U-Boot] [PATCH u-boot 0/2] net: designware: add meson meson compatibles
2019-01-02 21:01 UTC (2+ messages)
[U-Boot] [PATCH v4 0/8] rk3399-puma: Enable PWM regulator for RK3399-Q7
2019-01-02 20:18 UTC (17+ messages)
` [U-Boot] [PATCH v4 1/8] rockchip: rk3399-puma: Cleanup of vdd_log DTS entry
` [U-Boot] [U-Boot, v4, "
` [U-Boot] [PATCH v4 2/8] power: regulator: Allow PWM regulator to be omitted from SPL
` [U-Boot] [U-Boot, v4, "
` [U-Boot] [PATCH v4 3/8] rockchip: rk3399-puma: enable PWM regulator in Puma defconfig
` [U-Boot] [U-Boot, v4, "
` [U-Boot] [PATCH v4 4/8] dm: pinctrl: Add pinctrl_decode_pin_config_dm()
` [U-Boot] [U-Boot, v4, "
` [U-Boot] [PATCH v4 5/8] rockchip: rk3399: Add improved pinctrl driver
` [U-Boot] [U-Boot, v4, "
` [U-Boot] [PATCH v4 6/8] rockchip: rk3399: Add Kconfig option for full "
` [U-Boot] [U-Boot, v4, "
` [U-Boot] [PATCH v4 7/8] rockchip: rk3399-puma: enable full pinctrl driver in Puma defconfig
` [U-Boot] [U-Boot, v4, "
` [U-Boot] [PATCH v4 8/8] rockchip: rk3399-puma: Set VDD_LOG to 950 mV
` [U-Boot] [U-Boot, v4, "
[U-Boot] [PATCH 2/2] rockchip: ram: update license for sdram driver
2019-01-02 20:18 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 1/2] rockchip: rk3036: ram: update license
2019-01-02 20:18 UTC (2+ messages)
` [U-Boot] [U-Boot,1/2] "
[U-Boot] [PATCH] configs: move CONFIG_SPL_TEXT_BASE to Kconfig
2019-01-02 20:13 UTC (4+ messages)
` [U-Boot] "
[U-Boot] Pull request: u-boot-spi/master
2019-01-02 19:19 UTC
[U-Boot] [PATCH v2 1/2] dm: MIGRATION: Update migration plan for SPI
2019-01-02 19:19 UTC (3+ messages)
` [U-Boot] [PATCH v2 2/2] dm: MIGRATION: Update migration plan for DM_SPI_FLASH
[U-Boot] [PATCH 1/1] tools: imx8image: use correct printf escape sequence
2019-01-02 19:11 UTC (2+ messages)
[U-Boot] [PATCH 1/1] cmd: usb: display bus number
2019-01-02 18:33 UTC (6+ messages)
[U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
2019-01-02 18:25 UTC (7+ messages)
[U-Boot] [PATCH 0/2] lib: fdtdec: Couple of fies
2019-01-02 16:33 UTC (3+ messages)
` [U-Boot] [PATCH 2/2] lib: fdtdec: fixup fdtdec_get_addr_size
[U-Boot] [PATCH] board: mvebu: drop unused ETH_PHY macro definitions
2019-01-02 16:26 UTC
[U-Boot] [PATCH v1 00/14] dm: Convert TPC70 to use DM and DTS in SPL and u-boot proper
2019-01-02 14:37 UTC (48+ messages)
` [U-Boot] [PATCH v1 01/14] tpc70: config: Add script commands to update u-boot and OE's wic
` [U-Boot] [PATCH v1 02/14] tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update
` [U-Boot] [PATCH v1 03/14] tpc70: Provide board_boot_order() function to distinct between eMMC and SD boot
` [U-Boot] [PATCH v1 04/14] DTS: imx: Remove not needed '#address-cells' and '#size-cells' properties
` [U-Boot] [PATCH v1 05/14] board: cosmetic: Use define to set ENET clock selection mask on TPC70
` [U-Boot] [PATCH v1 06/14] DM: tpc70: led: Enable LED default state
` [U-Boot] [PATCH v1 07/14] pinctrl: imx: Replace static soc info definitions with run time allocations
` [U-Boot] [PATCH v1 08/14] DTS: imx: Add "u-boot, dm-pre-reloc" property to relevant imx6qdl nodes
` [U-Boot] [PATCH v1 09/14] imx: serial: dm: Enable DM_FLAG_PRE_RELOC in the IMX uart driver
` [U-Boot] [PATCH v1 10/14] imx: clock: Introduce set_fec_clock() to configure ETH clock (imx6)
` [U-Boot] [PATCH v1 11/14] DM: net: imx: Provide weak function to initialize fec clocks
` [U-Boot] [PATCH v1 12/14] imx: mmc: Use 'fsl, usdhc-index' property to provide esdhc controller number
` [U-Boot] [PATCH v1 13/14] DTS: imx: tpc70: Add TPC70 board (imx6q based) device tree description
` [U-Boot] [PATCH v1 14/14] imx: tpc70: Convert TPC70 (imx6q based) board to use DM/DTS in SPL and u-boot
[U-Boot] Re : Re: please pull u-boot-samsung master
2019-01-02 13:46 UTC (2+ messages)
` [U-Boot] Re : "
[U-Boot] [PATCH] exynos: allow SPL to build in thumb mode
2019-01-02 13:31 UTC
[U-Boot] [PATCH v2 0/9] Add common pinctrl driver support for rockchip
2019-01-02 13:02 UTC (10+ messages)
` [U-Boot] [PATCH v2 1/9] rockchip: rk3399-evb: defconfig: Enable FDT for new pinctrl driver
` [U-Boot] [PATCH v2 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
` [U-Boot] [PATCH v2 3/9] ARM: rockchip: Kconfig: Remove the SPL_PINCTRL for rk3188
` [U-Boot] [PATCH v2 4/9] ARM: rockchip: Remove the pinctrl request at rk3288-board-spl
` [U-Boot] [PATCH v2 5/9] rk3288: chrome: defconfig: Enable FDT for new pinctrl driver
` [U-Boot] [PATCH v2 6/9] pinctrl: rockchip: Add common rockchip "
` [U-Boot] [PATCH v2 7/9] rockchip: defconfig: Clean the unused pinctrl config
` [U-Boot] [PATCH v2 8/9] pinctrl: rockchip: Clean the unused rockchip pinctrl drivers
` [U-Boot] [PATCH v2 9/9] ARM: dts: rk322x: Correct the uart2 default pin configuration
[U-Boot] [PATCH 0/5] imx8: several fixes
2019-01-02 12:10 UTC (2+ messages)
[U-Boot] [PATCH v2 0/3] ddr: vybrid: Support for vf610 built-in DDR3 memory calibration
2019-01-02 11:28 UTC (2+ messages)
[U-Boot] [PATCH v2 1/6] mips: mscc_sgpio: Add the MSCC serial GPIO device (SIO)
2019-01-02 8:52 UTC (8+ messages)
` [U-Boot] [PATCH v3 0/6] mips: mscc: gpio: Add MSCC serial GPIO driver
` [U-Boot] [PATCH v3 1/6] mips: mscc_sgpio: Add the MSCC serial GPIO device (SIO)
` [U-Boot] [PATCH v3 2/6] mips: mscc_sgpio: Add DT bindings documentation
` [U-Boot] [PATCH v3 3/6] mips: luton: DT: Enable use of serial gpio
` [U-Boot] [PATCH v3 4/6] mips: luton: Enable use of serial gpio for LED
` [U-Boot] [PATCH v3 5/6] mips: ocelot: DT: Enable use of serial gpio
` [U-Boot] [PATCH v3 6/6] mips: ocelot: Enable use of serial gpio for LED
[U-Boot] [PATCH 1/2] tools/imx8m_image.sh: remove bashism
2019-01-02 6:58 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] imx8mq_evk/README: remove ARCH environment variable
[U-Boot] Pull request: u-boot-sunxi/master
2019-01-02 1:02 UTC (2+ messages)
[U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190101
2019-01-02 1:02 UTC (2+ messages)
[U-Boot] a8011eb84d not working on V40 (Banana Pi M2 Berry)
2019-01-01 19:55 UTC (2+ messages)
[U-Boot] [PATCH] Add Hynix H27UBG8T2BTR id
2019-01-01 19:30 UTC (4+ messages)
[U-Boot] [PATCH] net: bcm6368: fix restart flow issues
2019-01-01 18:44 UTC
[U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181217
2019-01-01 13:43 UTC (4+ messages)
[U-Boot] [PATCH 3/3] riscv: bootm: Support booting VxWorks
2019-01-01 13:32 UTC (2+ messages)
` [U-Boot] [U-Boot,3/3] "
[U-Boot] [PATCH 2/3] bootm: vxworks: Make do_bootm_vxworks() non-static
2019-01-01 13:32 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 1/3] bootm: vxworks: Make do_bootvx_fdt() static
2019-01-01 13:32 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] Please pull u-boot-x86
2019-01-01 13:32 UTC (2+ messages)
[U-Boot] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
2018-12-31 19:31 UTC (9+ messages)
` [U-Boot] [linux-sunxi] "
[U-Boot] [PATCH v5 00/26] clk: Add Allwinner CLK, RESET support
2018-12-31 18:38 UTC (30+ messages)
` [U-Boot] [PATCH v5 01/26] clk: Add Allwinner A64 CLK driver
` [U-Boot] [PATCH v5 02/26] reset: Add Allwinner RESET driver
` [U-Boot] [PATCH v5 03/26] clk: sunxi: Add Allwinner H3/H5 CLK driver
` [U-Boot] [PATCH v5 04/26] clk: sunxi: Add Allwinner A10/A20 "
` [U-Boot] [PATCH v5 05/26] clk: sunxi: Add Allwinner A10s/A13 "
` [U-Boot] [PATCH v5 06/26] clk: sunxi: Add Allwinner A31 "
` [U-Boot] [PATCH v5 07/26] clk: sunxi: Add Allwinner A23/A33 "
` [U-Boot] [PATCH v5 08/26] clk: sunxi: Add Allwinner A83T "
` [U-Boot] [PATCH v5 09/26] clk: sunxi: Add Allwinner R40 "
` [U-Boot] [PATCH v5 10/26] clk: sunxi: Add Allwinner V3S "
` [U-Boot] [PATCH v5 11/26] clk: sunxi: Implement UART clocks
` [U-Boot] [PATCH v5 12/26] clk: sunxi: Implement UART resets
` [U-Boot] [PATCH v5 13/26] clk: sunxi: Add Allwinner H6 CLK driver
` [U-Boot] [PATCH v5 14/26] sunxi: A64: Update sun50i-a64-ccu.h
` [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support
` [U-Boot] [PATCH v5 16/26] sunxi: Enable CLK
` [U-Boot] [PATCH v5 17/26] phy: sun4i-usb: Use CLK and RESET support
` [U-Boot] [PATCH v5 18/26] reset: Add reset valid
` [U-Boot] [PATCH v5 19/26] musb-new: sunxi: Use CLK and RESET support
` [U-Boot] [PATCH v5 20/26] sunxi: usb: Switch to Generic host controllers
` [U-Boot] [PATCH v5 21/26] usb: host: Drop [e-o]hci-sunxi drivers
` [U-Boot] [PATCH v5 22/26] clk: sunxi: Implement SPI clocks
` [U-Boot] [PATCH v5 23/26] spi: sun4i: Add CLK support
` [U-Boot] [PATCH v5 24/26] clk: sunxi: Implement A64 SPI clocks, resets
` [U-Boot] [PATCH v5 25/26] spi: Add Allwinner A31 SPI driver
` [U-Boot] [PATCH v5 26/26] board: sopine: Enable SPI/SPI-FLASH
[U-Boot] [PATCH] fdt: Add warning about CONFIG_OF_EMBED
2018-12-31 16:23 UTC (6+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox