public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
 messages from 2019-03-01 12:10:54 to 2019-03-05 02:32:13 UTC [more...]

[U-Boot] [PATCH RESEND 01/10] pinctrl: imx8: add i.MX8QM compatible
 2019-03-05  2:32 UTC 

[U-Boot] [PATCH v2 0/1] efi_loader: support BootNext and BootCurrent
 2019-03-05  1:58 UTC  (2+ messages)
` [U-Boot] [PATCH v2 1/1] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior

[U-Boot] [PATCH 1/6] ARM: rmobile: Imply clock drivers per SoC
 2019-03-04 23:40 UTC  (5+ messages)
` [U-Boot] [PATCH 6/6] ARM: rmobile: Sync Gen3 defconfigs

[U-Boot] [PATCH 1/2] configs: stm32f746-disco: Enable SPI_FLASH_MACRONIX
 2019-03-04 23:15 UTC  (3+ messages)
` [U-Boot] [PATCH 2/2] board: stm32f746-disco: Get MII/RMII phy_mode from DT

[U-Boot] [PATCH v4 00/22] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS
 2019-03-04 22:35 UTC  (4+ messages)
` [U-Boot] [PATCH v4 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy

[U-Boot] [PATCH] board: fsl: lx2160aqds: modify the phy fixup code
 2019-03-04 22:28 UTC  (2+ messages)

[U-Boot] [PATCH] drivers/net/fec: phy_init: remove redundant logic
 2019-03-04 22:23 UTC  (2+ messages)

[U-Boot] [PATCH 1/2] net: phy: micrel: Use correct skew values on KSZ9021
 2019-03-04 21:49 UTC  (4+ messages)
` [U-Boot] [PATCH 2/2] net: phy: micrel: Find Micrel PHY node correctly

[U-Boot] [PATCH v2 0/5] arm: socfpga: stack and Kconfig cleanups
 2019-03-04 21:34 UTC  (9+ messages)
` [U-Boot] [PATCH v2 1/5] arm: socfpga: fix comment about SPL memory layout
` [U-Boot] [PATCH v2 2/5] arm: socfpga: a10: move SPL stack size to Kconfig
` [U-Boot] [PATCH v2 3/5] arm: socfpga: put initial U-Boot stack into DDR
` [U-Boot] [PATCH v2 4/5] arm: socfpga: imply/default common config options
` [U-Boot] [PATCH v2 5/5] arm: socfpga: gen5: reduce SPL pre-reloc malloc

[U-Boot] [PULL] u-boot-sh/master
 2019-03-04 21:33 UTC 

[U-Boot] [RFC/RESEND 00/22] Add support for Cavium Octeon-TX CN80XX/CN81XX
 2019-03-04 20:07 UTC  (25+ messages)
` [U-Boot] [RFC/RESEND 01/22] arm: introduce ARCH_THUNDERX
` [U-Boot] [RFC/RESEND 02/22] arm: add thunderx_81xx
` [U-Boot] [RFC/RESEND 03/22] thunderx: add FDT support
` [U-Boot] [RFC/RESEND 04/22] thunderx: add thunderx register definitions and misc functions
` [U-Boot] [RFC/RESEND 05/22] thunderx: move DRAM prints to debug
` [U-Boot] [RFC/RESEND 06/22] dm: pci: add PCI SR-IOV EA support
` [U-Boot] [RFC/RESEND 07/22] fdt: add fdtdec_get_pci_bus_range
` [U-Boot] [RFC/RESEND 08/22] pci: add thunderx pci/ecam driver
` [U-Boot] [RFC/RESEND 09/22] pci: fix pce enumeration on thunderx
` [U-Boot] [RFC/RESEND 10/22] arm: include 64bit io accessors
` [U-Boot] [RFC/RESEND 11/22] gpio: add thunderx gpio driver
` [U-Boot] [RFC/RESEND 12/22] i2c: add thunderx I2C driver
` [U-Boot] [RFC/RESEND 13/22] spi: add thunderx SPI driver
` [U-Boot] [RFC/RESEND 14/22] xhci: add support for cavium thunderx XHCI
` [U-Boot] [RFC/RESEND 15/22] thunderx_81xx: add support for XHCI
` [U-Boot] [RFC/RESEND 16/22] thunderx_81xx: enable usb mass storage and usb ethernet
` [U-Boot] [RFC/RESEND 17/22] ahci: support 64bit systems
` [U-Boot] [RFC/RESEND 18/22] ahci: set n_ports from host caps
` [U-Boot] [RFC/RESEND 19/22] ahci: add support for ThunderX AHCI
` [U-Boot] [RFC/RESEND 20/22] thunderx_81xx: add AHCI support
` [U-Boot] [RFC/RESEND 21/22] net: add thunderx vnic drivers
` [U-Boot] [RFC/RESEND 22/22] pci: auto probe thunderx NIC devices

[U-Boot] [PATCH 1/6] i2c: rcar_i2c: Fix u32 cast warnings
 2019-03-04 19:47 UTC  (9+ messages)
` [U-Boot] [PATCH 2/6] i2c: rcar_i2c: Add comments about registers & values
` [U-Boot] [PATCH 3/6] i2c: rcar_i2c: Fix sending of slave addresses
` [U-Boot] [PATCH 4/6] i2c: rcar_i2c: Don't mask errors with EREMOTEIO at rcar_i2c_xfer
` [U-Boot] [PATCH 5/6] i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer
` [U-Boot] [PATCH 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover

[U-Boot] [PATCH] drivers: net: ls1088ardb: Fix EC1 and EC2 RCW offset
 2019-03-04 19:21 UTC  (3+ messages)

[U-Boot] [PATCH] driver: net: fsl-mc: Fix DPC MAC address fixup
 2019-03-04 19:18 UTC  (2+ messages)

[U-Boot] [RESEND PATCH] net: phy: Reloc next and prev pointers inside phy_drivers
 2019-03-04 19:04 UTC  (2+ messages)

[U-Boot] [RESEND PATCH] net: phy: Fix return value check phy_probe
 2019-03-04 19:04 UTC  (2+ messages)

[U-Boot] [PATCH 0/2] Apply correct skew values to KSZ9021 PHYs
 2019-03-04 17:40 UTC 

[U-Boot] SWUpdate - U-Boot environment library dependency
 2019-03-04 16:26 UTC  (3+ messages)
  ` [U-Boot] [swupdate] "

[U-Boot] tools: board config CONFIG_SYS_BOOTM_LEN is being ignored
 2019-03-04 15:30 UTC 

[U-Boot] [PATCH v1] dfu: Avoid declaring unused variables and absent parameters
 2019-03-04 14:04 UTC 

[U-Boot] [PATCH] spi: designware: Change include order
 2019-03-04 12:27 UTC  (2+ messages)

[U-Boot] [PATCH v2] spi: cadence_qspi: Add quad write support
 2019-03-04 12:23 UTC  (2+ messages)

[U-Boot] [PATCH] sunxi: update SATA driver to always use DM_SCSI
 2019-03-04 12:22 UTC  (2+ messages)

[U-Boot] [PULL] U-boot-atmel 2019.04-a
 2019-03-04 11:35 UTC 

[U-Boot] [PATCH 0/7] Migrate SPI defines to Kconfig
 2019-03-04 10:51 UTC  (5+ messages)
` [U-Boot] [PATCH 5/7] Convert CONFIG_SF_DEFAULT_* "

[U-Boot] [PATCH 0/9] sunxi: Allow FEL capable SPLs with 32bit builds
 2019-03-04 10:44 UTC  (5+ messages)
` [U-Boot] [PATCH 6/9] sunxi: allow 32-bit builds for 64-bit SoCs

[U-Boot] [PATCH] driver: net: fsl-mc: Fix DPC MAC address fixup
 2019-03-04  9:19 UTC  (2+ messages)

[U-Boot] Please pull u-boot-fsl-qoriq master
 2019-03-04  8:57 UTC 

[U-Boot] [PATCH] board: ls1046qds: Enable PPA for secure boot
 2019-03-04  8:55 UTC  (2+ messages)

[U-Boot] [PATCH] board/freescale: Enable DHCP distro boot for Layerscape board
 2019-03-04  8:55 UTC  (2+ messages)

[U-Boot] [PATCH v2 1/3] fsl_sec: fix register layout on Layerscape architectures
 2019-03-04  8:53 UTC  (2+ messages)

[U-Boot] [PATCH] configs: fsl: move DDR specific defines to Kconfig
 2019-03-04  8:53 UTC  (3+ messages)

[U-Boot] [PATCH 00/12] nxp: fix dhcp and efi boot support for various socs
 2019-03-04  8:52 UTC  (2+ messages)

[U-Boot] [PATCH v2 0/3] Add Ethernet support for Poplar board
 2019-03-04  6:28 UTC  (2+ messages)

[U-Boot] [PATCH v2 1/2] x86: edison: Use proper number of serial interface
 2019-03-04  6:24 UTC  (5+ messages)
` [U-Boot] [PATCH v2 2/2] x86: edison: Add the rest of UARTs present on board

[U-Boot] [PATCH v2] x86: acpi: Not every platform has serial console a first device
 2019-03-04  6:24 UTC  (3+ messages)

[U-Boot] [PATCH v1 1/2] x86: acpi: Add DMA descriptors for SPI5 on Intel Tangier
 2019-03-04  6:24 UTC  (6+ messages)
` [U-Boot] [PATCH v1 2/2] x86: acpi: Add DMA descriptors for I2C1 "

[U-Boot] [REGRESSION] tegra124: nyan-big: LPAE not working
 2019-03-04  3:06 UTC  (3+ messages)

[U-Boot] [PATCH 1/9] pinctrl: renesas: Fix r8a779{5, 6, 65} assign to GP7_03/02 of GPSR7
 2019-03-04  0:46 UTC  (9+ messages)
` [U-Boot] [PATCH 2/9] pinctrl: renesas: Fix r8a779{5, 6, 65} rename sel_adg_ to sel_adg
` [U-Boot] [PATCH 3/9] pinctrl: renesas: Remove r8a779{5, 6, 65} CC5_OSCOUT of IP17
` [U-Boot] [PATCH 4/9] pinctrl: renesas: Fix r8a779{6, 65} rename sel_ndfc to sel_ndf
` [U-Boot] [PATCH 5/9] pinctrl: renesas: r8a77990: Fix rename RTSx_N_TANS_x to RTSx_N_x
` [U-Boot] [PATCH 6/9] pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit2 when using RX2, TX2 and SCK2
` [U-Boot] [PATCH 7/9] pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit16 when using NFALE and NFRB_N
` [U-Boot] [PATCH 8/9] pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit3 when using TX0
` [U-Boot] [PATCH 9/9] pinctrl: renesas: r8a77990: Reivse USB ID pin name

[U-Boot] [PATCH] ARM: imx6q_logic: Enable UUID support
 2019-03-03 22:22 UTC 

[U-Boot] [PATCH 0/2] Fix broken ethernet on imx8qxp-mek
 2019-03-03 22:18 UTC  (10+ messages)
` [U-Boot] [PATCH 1/2] net: dm: fec: Support phy-reset-post-delay property
` [U-Boot] [PATCH 2/2] dts: imx8qxp-mek: Add PHY post reset delay

[U-Boot] [PATCHv2] ARM: socfpga: fix data and tag latency values for pl310 cache controller
 2019-03-03 17:31 UTC  (2+ messages)

[U-Boot] [PATCH] arm64: dts: rockchip: Fix io power source for sdmmc0 on Firefly-RK3399
 2019-03-03 11:44 UTC 

[U-Boot] Marvell DDR training custom ODT configuration
 2019-03-03  8:11 UTC  (3+ messages)

[U-Boot] [PATCH 1/2] mv_ddr: ddr3: fix tRAS timimg parameter
 2019-03-03  8:09 UTC  (3+ messages)
` [U-Boot] [PATCH 2/2] mv_ddr: ddr3: only use active chip-selects when tuning ODT

[U-Boot] [v2] powerpc: t104xrdb: Add support of MTA9ADF1G72AZ DDR
 2019-03-03  4:42 UTC  (2+ messages)

[U-Boot] Please pull u-boot-mpc85xx.git master
 2019-03-03  4:41 UTC 

[U-Boot] [PATCH v3 1/1] efi_loader: HII protocols: debug messages
 2019-03-02 22:44 UTC 

[U-Boot] [PATCH 1/1] efi_loader: HII protocols: fix new_package_list()
 2019-03-02 22:08 UTC  (5+ messages)

[U-Boot] [PATCH 1/1] efi_loader: error handling for `efidebug boot add`
 2019-03-02 16:26 UTC  (2+ messages)

[U-Boot] [PATCH] i2c: rcar_i2c: Add Gen3 SoC support
 2019-03-02 16:17 UTC 

[U-Boot] [PATCH v2 1/1] efi_loader: HII protocols: informative error message
 2019-03-02 16:11 UTC  (2+ messages)

[U-Boot] [PATCH] ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BAR
 2019-03-02 12:33 UTC  (7+ messages)

[U-Boot] db-88f6820-amc doesn't boot on latest u-boot/master
 2019-03-02  7:25 UTC  (7+ messages)

[U-Boot] [PATCH v2] imx8mq_evk_defconfig: Enable pinctrl driver
 2019-03-02  6:27 UTC  (3+ messages)

[U-Boot] [PATCH] ARM: socfpga: configure pl310 from dts
 2019-03-02  4:08 UTC  (2+ messages)

[U-Boot] [PATCH] am335x-fb: don't override lcd_get_size()
 2019-03-01 22:50 UTC  (3+ messages)

[U-Boot] [PATCH] net:phy:aquantia Set only autoneg on in register 4.c441
 2019-03-01 21:45 UTC  (2+ messages)

[U-Boot] [PATCH] Convert CONFIG_IP_DEFRAG to Kconfig
 2019-03-01 21:44 UTC  (2+ messages)

[U-Boot] [PATCH] spl: add size check including devicetree
 2019-03-01 21:34 UTC 

[U-Boot] [PATCH] drivers: net: ldpaa_eth: check if the dpmac is enabled
 2019-03-01 21:30 UTC  (2+ messages)

[U-Boot] [PATCH v3 00/13] net: Add Allwinner EMAC CLK, RESET support
 2019-03-01 21:29 UTC  (13+ messages)
` [U-Boot] [PATCH v3 02/13] net: sunxi_emac: Add CLK support
` [U-Boot] [PATCH v3 03/13] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle
` [U-Boot] [PATCH v3 09/13] clk: sunxi: Implement EMAC, GMAC clocks, resets
` [U-Boot] [PATCH v3 10/13] net: sun8i_emac: Add CLK and RESET support
` [U-Boot] [PATCH v3 11/13] clk: sunxi: h3: Implement EPHY CLK and RESET
` [U-Boot] [PATCH v3 12/13] net: sun8i_emac: Add EPHY CLK and RESET support

[U-Boot] [PATCH] mc : Add support to run MC in 128 MB DDR size
 2019-03-01 21:25 UTC  (6+ messages)
` [U-Boot] [PATCH 1/2] cmd: efidebug: add memmap command
  ` [U-Boot] [PATCH 2/2] mc : Reduce MC memory size to 128M

[U-Boot] [PATCH 0/3] arm: socfpga: clean up socfpga_common.h
 2019-03-01 19:42 UTC  (13+ messages)
` [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ

[U-Boot] [PATCH v4 0/9] arm: socfpga: implement proper peripheral reset handling
 2019-03-01 19:16 UTC  (11+ messages)
` [U-Boot] [PATCH v4 1/9] arm: socfpga: gen5: sync devicetrees to Linux
` [U-Boot] [PATCH v4 2/9] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
` [U-Boot] [PATCH v4 3/9] reset: socfpga: rename membase ptr to modrst_base
` [U-Boot] [PATCH v4 4/9] arm: socfpga: gen5: deassert peripheral reset by default
` [U-Boot] [PATCH v4 5/9] reset: socfpga: add reset handling for old kernels
` [U-Boot] [PATCH v4 6/9] arm: socfpga: move gen5 SDR driver to DM
` [U-Boot] [PATCH v4 7/9] mtd: rawnand: denali: add reset handling
` [U-Boot] [PATCH v4 8/9] spi: cadence_qspi: "
` [U-Boot] [PATCH v4 9/9] arm: socfpga: implement proper peripheral reset

[U-Boot] [PATCH] fdt: Remove duplicate code
 2019-03-01 18:20 UTC 

[U-Boot] [PATCH] ARM: socfpga: Configure PL310 latencies
 2019-03-01 16:10 UTC  (7+ messages)

[U-Boot] SUNXI : CONFIG_VIDEO_SUNXI is never set
 2019-03-01 15:35 UTC 

[U-Boot] iMX8QXP MEK: no ethernet
 2019-03-01 13:37 UTC  (10+ messages)

[U-Boot] [PULL] u-boot-socfpga/master
 2019-03-01 12:59 UTC  (2+ messages)

[U-Boot] [PULL] u-boot-sh/master
 2019-03-01 12:59 UTC  (2+ messages)

[U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
 2019-03-01 12:48 UTC  (10+ messages)

[U-Boot] [PATCH v3 0/8] arm: socfpga: implement proper peripheral reset handling
 2019-03-01 12:31 UTC  (10+ messages)
` [U-Boot] [PATCH v3 4/8] reset: socfpga: add reset handling for old kernels

[U-Boot] [PATCH v2 00/23] apalis imx6 fixes, device tree enablement and driver model conversion
 2019-03-01 12:29 UTC  (5+ messages)
` [U-Boot] [PATCH v2 11/23] apalis_imx6: migrate mmc and sata to using driver model

[U-Boot] Question regarding SWUpdate ..... from command line
 2019-03-01 12:26 UTC  (2+ messages)

[U-Boot] [PATCH 00/10] tbs2910 fixes and driver model conversion
 2019-03-01 12:11 UTC  (9+ messages)
` [U-Boot] [PATCH 03/10] board: tbs2910: Add device tree
` [U-Boot] [PATCH 04/10] board: tbs2910: Add pinctrl driver and convert gpio to driver model
` [U-Boot] [PATCH 05/10] board: tbs2910: Convert usb "
` [U-Boot] [PATCH 06/10] board: tbs2910: Convert i2c and rtc "
` [U-Boot] [PATCH 07/10] ata: dwc_ahsata: Fix sector reports for large disks
` [U-Boot] [PATCH 08/10] ata: dwc_ahsata: Add ahci driver model support
` [U-Boot] [PATCH 09/10] board: tbs2910: Convert sata to ahci driver model
` [U-Boot] [PATCH 10/10] board: tbs2910: Convert mmc to "


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox