messages from 2019-03-13 09:30:08 to 2019-03-14 21:10:06 UTC [more...]
[U-Boot] [PATCH v1] dfu: Avoid declaring unused variables and absent parameters
2019-03-14 21:10 UTC (3+ messages)
[U-Boot] [PATCH v3 0/3] ARM: meson: add p200 and p201 boards
2019-03-14 21:09 UTC (4+ messages)
` [U-Boot] [PATCH v3 1/3] ARM: dts: "
` [U-Boot] [PATCH v3 2/3] ARM: board: meson: add p201 board
` [U-Boot] [PATCH v3 3/3] ARM: board: meson: add p200 board
[U-Boot] [PATCH 0/7] SMP support for RISC-V
2019-03-14 21:04 UTC (8+ messages)
` [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems
[U-Boot] [PATCH] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"
2019-03-14 20:57 UTC
[U-Boot] [PATCH v2 1/1] efi_loader: fix build error for freestanding.o
2019-03-14 20:16 UTC (2+ messages)
[U-Boot] [PATCH v2 0/3] ARM: meson: add p200 and p201 boards
2019-03-14 20:13 UTC (7+ messages)
` [U-Boot] [PATCH v2 1/3] ARM: dts: "
` [U-Boot] [PATCH v2 2/3] ARM: board: meson: add p201 board
` [U-Boot] [PATCH v2 3/3] ARM: board: meson: add p200 board
[U-Boot] [PATCH 1/1] efi_loader: fix build error for freestanding.o
2019-03-14 19:57 UTC (5+ messages)
[U-Boot] [PATCH] arndale: fix unknown status
2019-03-14 19:23 UTC (6+ messages)
[U-Boot] [PATCH 00/10] tbs2910 fixes and driver model conversion
2019-03-14 19:18 UTC (4+ messages)
` [U-Boot] [PATCH 01/10] board: tbs2910: Fix default environment
[U-Boot] [PATCH] common: image-android-dt: Fix out-of-bounds access
2019-03-14 17:31 UTC
[U-Boot] Clearfog Base PCI-E not working
2019-03-14 16:37 UTC
[U-Boot] [PATCH] usb: host: Print device name when scanning
2019-03-14 16:19 UTC (6+ messages)
[U-Boot] [PATCH] Revert "env: add spi_flash_read_env function"
2019-03-14 15:36 UTC (4+ messages)
` [U-Boot] "
[U-Boot] Where to add maintainers for pwm?
2019-03-14 15:36 UTC (2+ messages)
[U-Boot] Pull request: u-boot-imx u -boot-imx-201900313
2019-03-14 15:36 UTC (2+ messages)
[U-Boot] [PATCH] Revert "fs: fat: support write with non-zero offset"
2019-03-14 15:35 UTC (2+ messages)
[U-Boot] [PATCH 1/2] ARM: dts: meson: add p200 and p201 boards
2019-03-14 15:29 UTC (2+ messages)
[U-Boot] [PATCH 5/5] arm: ti: boot: Implement Android boot using DT image format
2019-03-14 15:19 UTC (2+ messages)
` [U-Boot] [5/5] "
[U-Boot] [PATCH 0/2] ARM: meson: add p200 and p201 boards
2019-03-14 15:10 UTC (2+ messages)
[U-Boot] [PATCH 2/2] ARM: board: meson: add p200 and p201 boards
2019-03-14 15:08 UTC
[U-Boot] [PATCH] configs: am335x_evm: Add CONFIG_BLK
2019-03-14 14:09 UTC
[U-Boot] [RESEND][PATCH v1 0/4] usb: dwc2_udc_otg: Add tx_fifo_sz array support
2019-03-14 12:00 UTC (7+ messages)
` [U-Boot] [RESEND][PATCH v1 1/4] usb: dwc2_udc_otg: Read MAX_HW_ENDPOINT from HWCFG4 register
` [U-Boot] [RESEND][PATCH v1 2/4] usb: dwc2_udc_otg: Add tx_fifo_sz array support
` [U-Boot] [RESEND][PATCH v1 3/4] board: stm32mp1: Add tx_fifo_sz_array support
` [U-Boot] [RESEND][PATCH v1 4/4] ARM: dts: stm32: Remove g-tx-fifo-size from stm32mp157c-ev1-u-boot
[U-Boot] [PATCH 0/3] PSCI support for r8a7790 SoC (Lager/Stout boards)
2019-03-14 11:37 UTC (11+ messages)
` [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards
[U-Boot] [PATCH 1/3] arm: sunxi: Allow per-platform DRAM ZQ configuration on sun8i
2019-03-14 11:25 UTC (5+ messages)
` [U-Boot] [PATCH 2/3] arm: sunxi: Set the default DRAM ZQ value to 3881979 on H3/H5
` [U-Boot] [PATCH 3/3] arm: sunxi: Enable DRAM ODT by default "
` [U-Boot] [linux-sunxi] [PATCH 1/3] arm: sunxi: Allow per-platform DRAM ZQ configuration on sun8i
[U-Boot] RPi Compute Module DTB naming scheme
2019-03-14 11:15 UTC (2+ messages)
[U-Boot] [PATCH] arm: sunxi: Add support for the RerVision H3-DVK board
2019-03-14 10:40 UTC
[U-Boot] [PATCH] phy: sun4i-usb: Fix PHY0 routing and passby configuration for MUSB
2019-03-14 10:38 UTC
[U-Boot] passing info from SPL to U-Boot
2019-03-14 10:02 UTC (16+ messages)
[U-Boot] [PATCH] MAINTAINERS: Remove unsupported statuses - Odd Fixes and Obsolete
2019-03-14 9:53 UTC
[U-Boot] please pull u-boot-samsung master
2019-03-14 9:46 UTC (4+ messages)
` [U-Boot] [v2] "
[U-Boot] [PATCH 00/10] Update Stratix 10 SDRAM driver
2019-03-14 8:23 UTC (4+ messages)
[U-Boot] [PATCH] ARM: zynq: Check zynq aes & rsa command parameters count
2019-03-14 8:20 UTC
[U-Boot] [PATCH] arm64: zynqmp: Use zynqmp_mmio_read/write functions
2019-03-14 8:19 UTC
[U-Boot] [PATCH] i2c: i2c_cdns: Fix below warnings with checker tool
2019-03-14 8:18 UTC
[U-Boot] [PATCH 1/3] Move CONFIG_FSL_ESDHC to defconfig
2019-03-14 8:02 UTC (4+ messages)
` [U-Boot] [PATCH 2/3] mmc: split fsl_esdhc driver for i.MX
[U-Boot] [PATCH 00/13] board: ge: initial dm support
2019-03-14 7:34 UTC (6+ messages)
` [U-Boot] [PATCH 13/13] bootcount: i2c: Delay after writing
` [U-Boot] EXT: "
[U-Boot] [PATCH 0/4] Let's write correct arch/*/dts/Makefile
2019-03-14 6:26 UTC (6+ messages)
` [U-Boot] [PATCH 1/4] ARM: fix arch/arm/dts/Makefile
` [U-Boot] [PATCH 2/4] powerpc: fix arch/powerpc/dts/Makefile
` [U-Boot] [PATCH 3/4] mips: add missing dtb-y to arch/mips/dts/Makefile
` [U-Boot] [PATCH 4/4] Revert "Ensure device tree DTS is compiled"
[U-Boot] [PATCH v2 0/4] arm: socfpga: enable rtc support for the socrates board
2019-03-14 4:42 UTC (6+ messages)
` [U-Boot] [PATCH v2 1/4] i2c: designware: fix reset handling on socfpga gen5
` [U-Boot] [PATCH v2 2/4] rtc: m41t62: add compatible for m41t82
` [U-Boot] [PATCH v2 3/4] arm: socfpga: socrates: make rtc work
` [U-Boot] [PATCH v2 4/4] configs: socfpga: socrates: enable rtc support
[U-Boot] [PATCH] Revert "Ensure device tree DTS is compiled"
2019-03-14 2:48 UTC (7+ messages)
` [U-Boot] "
[U-Boot] [PATCH] ARM: dts: socfpga: Add missing altr, sysmgr-syscon for EMAC
2019-03-14 2:26 UTC (8+ messages)
[U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings
2019-03-14 1:01 UTC (12+ messages)
[U-Boot] [PATCH] travis: Add srecord package
2019-03-14 0:01 UTC
[U-Boot] [PATCH 1/5] ARM: rmobile: Add dedicated R8A77965 SoC support
2019-03-13 23:41 UTC (5+ messages)
` [U-Boot] [PATCH 2/5] clk: renesas: Add R8A77965 clock tables
` [U-Boot] [PATCH 3/5] pinctrl: renesas: Add R8A77965 pin control tables
` [U-Boot] [PATCH 4/5] ARM: dts: rmobile: Import R8A77965 M3NULCB DTs
` [U-Boot] [PATCH 5/5] ARM: rmobile: Add R8A77965 M3NULCB support
[U-Boot] i.MX6 Code Consolidation suggestion/question
2019-03-13 21:36 UTC (3+ messages)
[U-Boot] [PATCH 1/2] lib: fdt: Allow enabling both LZO and GZIP DT compression
2019-03-13 21:08 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] lib: fdt: Allow LZO and GZIP DT compression in U-Boot
[U-Boot] [PATCH v5 01/13] m68k: add basic set of devicetrees
2019-03-13 20:46 UTC (13+ messages)
` [U-Boot] [PATCH v5 02/13] m68k: architecture changes to support fdt
` [U-Boot] [PATCH v5 03/13] m68k: add initial dts files for all m68k boards
` [U-Boot] [PATCH v5 04/13] m68k: enabling long jumps on mcf54x5 SoCs
` [U-Boot] [PATCH v5 05/13] configs: enable use of DT for all m68k boards
` [U-Boot] [PATCH v5 06/13] drivers: spi: cf_spi: add Kconfig option
` [U-Boot] [PATCH v5 07/13] drivers: spi: cf_spi: convert to driver model
` [U-Boot] [PATCH v5 08/13] configs: add DM_SPI config option
` [U-Boot] [PATCH v5 09/13] drivers: serial: mcfuart: add DT support
` [U-Boot] [PATCH v5 10/13] configs: remove CONFIG_SYS_DSPI_XX references
` [U-Boot] [PATCH v5 11/13] m68k: add OF control support to m68k
` [U-Boot] [PATCH v5 12/13] m68k: move dspi bus control functions into cf_spi.c driver
` [U-Boot] [PATCH v5 13/13] m68k: add dspi chip-select support
[U-Boot] [PATCH 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree
2019-03-13 18:02 UTC (3+ messages)
` [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path
` [U-Boot] [PATCH 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence
[U-Boot] [PATCH v3 00/26] subject: fs: fat: extend FAT write operations
2019-03-13 17:25 UTC (5+ messages)
` [U-Boot] [PATCH v3 09/26] fs: fat: refactor write interface for a file offset
` [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" fatwrite followed by fatload and then cmp fails
[U-Boot] [PATCH v2] MC : Report extra reserved memory to Linux
2019-03-13 17:10 UTC (2+ messages)
` [U-Boot] [PATCH v3] "
[U-Boot] [PATCH 1/5] test/py: mmc: Factor out device selection
2019-03-13 16:49 UTC (5+ messages)
` [U-Boot] [PATCH 2/5] test/py: mmc: Add 'mmc dev' test
` [U-Boot] [PATCH 3/5] test/py: mmc: Add 'mmc rescan' test
` [U-Boot] [PATCH 4/5] test/py: mmc: Add 'mmc info' test
` [U-Boot] [PATCH 5/5] test/py: mmc: Add 'mmc read' performance check
[U-Boot] [PATCH v1 0/2] Allow platform specific service handling on PSCI
2019-03-13 16:01 UTC (6+ messages)
[U-Boot] [PATCH v2 0/4] Add Support for NAND in dra71x-evm
2019-03-13 16:01 UTC (3+ messages)
[U-Boot] [PATCH] ARM: imx6logic: Stop overwriting fdt_file if manually set
2019-03-13 15:49 UTC
[U-Boot] [PATCH 1/4] lib: fdt: Split fdtdec_setup_mem_size_base()
2019-03-13 15:25 UTC (5+ messages)
` [U-Boot] [PATCH 4/4] ARM: renesas: Configure DRAM size from ATF DT fragment
[U-Boot] [PATCHv4 00/12] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs
2019-03-13 14:54 UTC (7+ messages)
` [U-Boot] [PATCHv4 08/12] pci: ls_pcie_g4: add Workaround for A-011577
` [U-Boot] [PATCHv4 11/12] pci: ls_pcie_g4: Add Workaround for A-011451
` [U-Boot] [PATCHv4 12/12] pci: ls_pcie_g4: add Workaround for A-011452
[U-Boot] [PATCH] ARM: DTS: imx6q-logicpd: Resync with Linux 5.1
2019-03-13 13:17 UTC (3+ messages)
[U-Boot] [PATCH V2] Revert "pico-imx7d: Add LCD support"
2019-03-13 11:40 UTC (5+ messages)
[U-Boot] [PATCH 01/34] Add target to generate initial environment
2019-03-13 10:28 UTC (3+ messages)
[U-Boot] USB to Ethernet adapter
2019-03-13 10:14 UTC
[U-Boot] [PATCH 01/13] board: ge: bx50v3: Enable CONFIG_DM
2019-03-13 9:47 UTC (2+ messages)
` [U-Boot] [U-Boot,01/13] "
[U-Boot] [PATCH 02/13] board: ge: bx50v3: Enable CONFIG_DM_MMC
2019-03-13 9:47 UTC (2+ messages)
` [U-Boot] [U-Boot,02/13] "
[U-Boot] [PATCH v2 01/23] apalis_imx6: get rid of obsolete nospl configurations
2019-03-13 9:47 UTC (7+ messages)
` [U-Boot] [U-Boot, v4, 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions
` [U-Boot] [U-Boot, v4, 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver
` [U-Boot] [U-Boot, v4, 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy
` [U-Boot] [U-Boot, v4, 02/22] net: Kconfig: FEC: Add dependency on VF610
` [U-Boot] [U-Boot, v4, 08/22] pcm052: board: vybrid: Update the board name for BK4 device
` [U-Boot] [U-Boot, v4, 20/22] pcm052: board: Add code to setup LED default states
[U-Boot] [PATCH v2 09/23] apalis_imx6: migrate i2c to using driver model
2019-03-13 9:38 UTC (20+ messages)
` [U-Boot] [U-Boot, v2, "
` [U-Boot] [U-Boot, v2, 01/23] apalis_imx6: get rid of obsolete nospl configurations
` [U-Boot] [U-Boot, v1, 18/26] colibri imx6: disable ri and dcd irq in uarts
` [U-Boot] [U-Boot, v1, 03/26] colibri_imx6: move console in env from header file to defconfig
` [U-Boot] [U-Boot, v1, 06/26] colibri_imx6: migrate to using device tree
` [U-Boot] [U-Boot, v2, 11/23] apalis_imx6: migrate mmc and sata to using driver model
` [U-Boot] [U-Boot, v1, 26/26] board: colibri_imx6: check for and report ecc errors in fuses
` [U-Boot] [U-Boot,v2,08/23] apalis_imx6: enable pin control driver
` [U-Boot] [U-Boot, v1, 07/26] colibri_imx6: clean-up and migrate gpios to using driver model
` [U-Boot] [U-Boot, v1, 04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support
` [U-Boot] [U-Boot, v1, 01/26] colibri_imx6: get rid of obsolete nospl configurations
` [U-Boot] [U-Boot, v1, 20/26] colibri_imx6: revert fuse value set in mfgr_fuse
` [U-Boot] [U-Boot, v1, 09/26] colibri_imx6: migrate i2c to using driver model
` [U-Boot] [U-Boot, v1, 16/26] colibri_imx6: unify sd/mmc drive strenght with linux kernel settings
` [U-Boot] [U-Boot, v2, 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration
` [U-Boot] [U-Boot, v2, 23/23] board: apalis_imx6: check for and report ecc errors in fuses
` [U-Boot] [U-Boot, v2, 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support
` [U-Boot] [U-Boot, v1, 13/26] colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP
` [U-Boot] [U-Boot, v2, 17/23] apalis_imx6: pf0100: reorder and cleanup message printing
[U-Boot] [PATCH v1 20/26] colibri_imx6: revert fuse value set in mfgr_fuse
2019-03-13 9:38 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, 21/23] apalis_imx6: use SDP if USB serial downloader has been used
[U-Boot] [PATCH 08/13] board: ge: store version information in fdt
2019-03-13 9:38 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 09/13] board: ge: bx50v3: Specific ARP timeout removed
2019-03-13 9:38 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH v4 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy
2019-02-13 21:46 UTC
[U-Boot] [PATCH v4 20/22] pcm052: board: Add code to setup LED default states
2019-02-13 21:46 UTC
[U-Boot] [PATCH v4 08/22] pcm052: board: vybrid: Update the board name for BK4 device
2019-02-13 21:46 UTC
[U-Boot] [PATCH v4 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions
2019-02-13 21:46 UTC
[U-Boot] [PATCH v4 02/22] net: Kconfig: FEC: Add dependency on VF610
2019-02-13 21:46 UTC
[U-Boot] [PATCH v4 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver
2019-02-13 21:46 UTC
[U-Boot] [PATCH v1 26/26] board: colibri_imx6: check for and report ecc errors in fuses
2019-02-08 17:42 UTC
[U-Boot] [PATCH v1 18/26] colibri imx6: disable ri and dcd irq in uarts
2019-02-08 17:42 UTC
[U-Boot] [PATCH v1 16/26] colibri_imx6: unify sd/mmc drive strenght with linux kernel settings
2019-02-08 17:42 UTC
[U-Boot] [PATCH v1 13/26] colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP
2019-02-08 17:42 UTC
[U-Boot] [PATCH v1 09/26] colibri_imx6: migrate i2c to using driver model
2019-02-08 17:42 UTC
[U-Boot] [PATCH v1 07/26] colibri_imx6: clean-up and migrate gpios to using driver model
2019-02-08 17:42 UTC
[U-Boot] [PATCH v1 06/26] colibri_imx6: migrate to using device tree
2019-02-08 17:42 UTC
[U-Boot] [PATCH v1 04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support
2019-02-08 17:42 UTC
[U-Boot] [PATCH v1 03/26] colibri_imx6: move console in env from header file to defconfig
2019-02-08 17:42 UTC
[U-Boot] [PATCH v1 01/26] colibri_imx6: get rid of obsolete nospl configurations
2019-02-08 17:42 UTC
[U-Boot] [PATCH v2 23/23] board: apalis_imx6: check for and report ecc errors in fuses
2019-02-08 17:12 UTC
[U-Boot] [PATCH v2 21/23] apalis_imx6: use SDP if USB serial downloader has been used
2019-02-08 17:12 UTC
[U-Boot] [PATCH v2 17/23] apalis_imx6: pf0100: reorder and cleanup message printing
2019-02-08 17:12 UTC
[U-Boot] [PATCH v2 11/23] apalis_imx6: migrate mmc and sata to using driver model
2019-02-08 17:12 UTC
[U-Boot] [PATCH v2 08/23] apalis_imx6: enable pin control driver
2019-02-08 17:12 UTC
[U-Boot] [PATCH v2 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration
2019-02-08 17:12 UTC
[U-Boot] [PATCH v2 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support
2019-02-08 17:12 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox