messages from 2019-03-25 10:13:00 to 2019-03-26 17:43:52 UTC [more...]
[U-Boot] [PULL] u-boot-sh/master
2019-03-26 17:43 UTC
[U-Boot] [PATCH v2 00/15] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
2019-03-26 17:19 UTC (5+ messages)
[U-Boot] [PATCH v2] mmc: correct the HS400 initialization process
2019-03-26 16:49 UTC (2+ messages)
[U-Boot] [PATCH] fastboot: getvar: correct/rename "has_slot" to "has-slot"
2019-03-26 16:46 UTC
[U-Boot] [SoCFPGA] co-custodianship
2019-03-26 16:43 UTC
[U-Boot] no DTB with nand SPL on sama5d3
2019-03-26 16:40 UTC (11+ messages)
` [U-Boot] scan_peb ubi error sama5d36 nand flash v2019.01
[U-Boot] [PATCH] configs: ti: Move FIT image load address to avoid overwrite
2019-03-26 16:31 UTC (3+ messages)
[U-Boot] [PATCH 0/3] ARM: meson: Add G12A USB Support
2019-03-26 15:53 UTC (5+ messages)
` [U-Boot] [PATCH 1/3] usb: dwc3: Add Meson G12A USB Glue
` [U-Boot] [PATCH 2/3] phy: meson: add Amlogic G12A USB2 and USB3+PCIE PHY drivers
` [U-Boot] [PATCH 3/3] mach-meson: g12a: add DWC2 peripheral mode support
[U-Boot] [PATCH 0/5] pico-imx7d: Add support for BL33 case
2019-03-26 15:11 UTC (8+ messages)
` [U-Boot] [PATCH 1/5] mx7_common: Share configs to skip low level init
` [U-Boot] [PATCH 2/5] imx: mx7: Add empty arch_cpu_init if skipped
` [U-Boot] [PATCH 3/5] pico-imx7d: Reserve region of memory to OPTEE
` [U-Boot] [PATCH 4/5] pico-imx7d: Add boot option for verified boot
` [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config
[U-Boot] [PATCH 0/6] ARM: meson: Add support for G12A based U200 board
2019-03-26 15:02 UTC (7+ messages)
` [U-Boot] [PATCH 1/6] pinctrl: meson: add g12a support
` [U-Boot] [PATCH 2/6] clk: create meson directory and move related drivers
` [U-Boot] [PATCH 3/6] clk: meson: add g12a support
` [U-Boot] [PATCH 4/6] ARM: meson: add G12a support
` [U-Boot] [PATCH 5/6] ARM: dts: Import Amlogic G12A u200 DT from Linux 5.1-rc1
` [U-Boot] [PATCH 6/6] boards: meson: add g12a u200
[U-Boot] [PATCH 01/12 v2] arm: at91: Makefile: Compile lowlevel_init only when really necessary
2019-03-26 14:50 UTC (16+ messages)
` [U-Boot] [PATCH 02/12 v2] arm: at91: spl_at91.c: Call spl_early_init() if OF_CONTROL is enabled
` [U-Boot] [PATCH 03/12 v2] serial: atmel_usart: Use fixed clock value in SPL version with DM_SERIAL
` [U-Boot] [PATCH 04/12 v2] watchdog: Handle SPL build with watchdog disabled
` [U-Boot] [PATCH 05/12 v2] watchdog: at91sam9_wdt: Fix WDT setup in at91_wdt_start()
` [U-Boot] [PATCH 06/12 v2] arm: at91: Enable watchdog support
` [U-Boot] [PATCH 07/12 v2] arm: at91: arm926ejs/u-boot-spl.lds: Add _image_binary_end to SPL lds
` [U-Boot] [PATCH 08/12 v2] Makefile.spl: Move generated AT91SAM NAND image boot.bin to spl directory
` [U-Boot] [PATCH 09/12 v2] Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary
` [U-Boot] [PATCH 10/12 v2] arm: at91: siemens: Add support to generate combined SPL+U-Boot image
` [U-Boot] [PATCH 11/12 v2] arm: at91: at91sam9x5.dtsi: Add watchdog handle
` [U-Boot] [PATCH 12/12 v2] arm: at91: Add gardena-gateway-at91sam support
[U-Boot] [PATCH] Revert "env: add spi_flash_read_env function"
2019-03-26 14:19 UTC (4+ messages)
[U-Boot] saveenv corrupts QSPI flash with latest commit U-Boot 2019.04-rc4-00047-gcfb3e102c4
2019-03-26 13:41 UTC (3+ messages)
[U-Boot] [PATCH v2] spl: spl_nand.c: Add NAND loading message
2019-03-26 13:30 UTC (2+ messages)
[U-Boot] [PATCH v2 1/2] eeprom: fix DM_I2C support without CONFIG_SYS_I2C_EEPROM_BUS
2019-03-26 12:38 UTC (2+ messages)
` [U-Boot] [PATCH v2 2/2] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"
[U-Boot] paralella board support
2019-03-26 11:34 UTC (2+ messages)
[U-Boot] [PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic
2019-03-26 10:34 UTC (6+ messages)
` [U-Boot] [REGRESSION: PATCH "
[U-Boot] [PATCH] reset-meson: Add AXG reset compatible
2019-03-26 10:25 UTC
[U-Boot] [PATCH 0/2] ARM: meson: Add support for Libretech-AC
2019-03-26 10:20 UTC (3+ messages)
` [U-Boot] [PATCH 1/2] ARM: dts: Import libretech-ac DT from Linux 5.0
` [U-Boot] [PATCH 2/2] boards: Amlogic: Add support for Libretech-AC
[U-Boot] [PATCH v2] ARM: meson: display Amlogic SoC Information
2019-03-26 9:28 UTC (2+ messages)
[U-Boot] [PATCH v5 0/5] ARM: meson: add support for p200 and p201 boards
2019-03-26 9:26 UTC (2+ messages)
[U-Boot] [PATCH v2 1/5] ppc: t2080qds: add eSDHC node
2019-03-26 9:07 UTC (6+ messages)
` [U-Boot] [PATCH v2 2/5] mmc: fsl_esdhc: ppc: set sdhc clock
` [U-Boot] [PATCH v2 3/5] mmc: fsl_esdhc: ppc: adopt 32 bit address
` [U-Boot] [PATCH v2 4/5] configs: enable device tree support for T2080QDS
` [U-Boot] [PATCH v2 5/5] configs: enable eSDHC device module in T2080QDS
[U-Boot] [PATCH] spi: spi-mem: Check if exec_op function is set before calling it
2019-03-26 9:01 UTC
[U-Boot] [PATCH] pico-imx7: Disable video support
2019-03-26 8:21 UTC (13+ messages)
[U-Boot] [PATCH] pm9g45: Migrate to CONFIG_DM
2019-03-26 7:44 UTC (2+ messages)
[U-Boot] [PATCH v4 0/4] Add Ethernet support for Poplar board
2019-03-26 7:35 UTC (2+ messages)
[U-Boot] [RFC PATCH 0/2] Add Kconfig to disable cache ops
2019-03-26 7:34 UTC (4+ messages)
` [U-Boot] [RFC PATCH 1/2] arch: armv8: Provide a way to disable cache maintenance ops
` [U-Boot] [RFC PATCH 2/2] board: ti: am654: select SYS_ARCH_IS_COHERENT for arm64
[U-Boot] [PATCH 01/11] arm: at91: Makefile: Compile lowlevel_init only when really necessary
2019-03-26 7:06 UTC (10+ messages)
` [U-Boot] [PATCH 03/11] serial: atmel_usart: Use fixed clock value in SPL version
` [U-Boot] [PATCH 08/11] Makefile.spl: Move generate AT91SAM NAND image boot.bin to spl directory
[U-Boot] [PATCH v2] spi: cadence_qspi: Add quad write support
2019-03-26 5:11 UTC (5+ messages)
[U-Boot] [PATCH 1/1] efi_loader: sanity checks when freeing memory
2019-03-26 5:04 UTC
[U-Boot] [PATCH 1/1] efi_selftest: avoid double free in dp utilities test
2019-03-26 5:03 UTC
[U-Boot] [PATCH] Revert "arm: config: fix default console only to specify the device"
2019-03-26 4:34 UTC (3+ messages)
[U-Boot] [PATCH v2 1/3] ppc: t2080qds: add usb node
2019-03-26 3:12 UTC (3+ messages)
` [U-Boot] [PATCH v2 2/3] usb: ehci: ppc: adopt 32 bit address
` [U-Boot] [PATCH v2 3/3] configs: enable usb device module in T2080QDS
[U-Boot] [PATCH] mmc: Align MMC_TRACE with tiny printf
2019-03-25 21:28 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] scripts/Makefile.extrawarn: Silence more DTC warnings
2019-03-25 21:28 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] rsa: check that pointer checksum isn't NULL before using it
2019-03-25 21:28 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"
2019-03-25 20:20 UTC (5+ messages)
` [U-Boot] "
[U-Boot] [PATCH v1] ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warnings
2019-03-25 16:40 UTC (2+ messages)
[U-Boot] [PATCH v1] apalis/colibri_imx6: add device trees to makefile
2019-03-25 16:38 UTC
[U-Boot] [PATCH v2 00/22] colibri vybrid fixes, device tree enablement and driver model conversion
2019-03-25 16:25 UTC (23+ messages)
` [U-Boot] [PATCH v2 01/22] Add missing space in comment
` [U-Boot] [PATCH v2 02/22] vf610: ddrmc: add missing include
` [U-Boot] [PATCH v2 03/22] imx: bootaux: add dependency on vf610
` [U-Boot] [PATCH v2 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig
` [U-Boot] [PATCH v2 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment
` [U-Boot] [PATCH v2 06/22] configs: colibri_vf: limit size of malloc() pool before relocation
` [U-Boot] [PATCH v2 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig
` [U-Boot] [PATCH v2 08/22] ARM: dts: colibri_vf: update device trees
` [U-Boot] [PATCH v2 09/22] configs: colibri_vf: disable obscure options
` [U-Boot] [PATCH v2 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm
` [U-Boot] [PATCH v2 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model
` [U-Boot] [PATCH v2 12/22] config: colibri_vf: use macros from linux/sizes.h
` [U-Boot] [PATCH v2 13/22] colibri_vf: add distroboot support
` [U-Boot] [PATCH v2 14/22] colibri_vf: set fdtfile for distroboot
` [U-Boot] [PATCH v2 15/22] colibri_vf: sync the board info message
` [U-Boot] [PATCH v2 16/22] colibri_vf: enable user debug by default
` [U-Boot] [PATCH v2 17/22] colibri_vf: disable undefined instruction events in user debug
` [U-Boot] [PATCH v2 18/22] config: colibri_vf: enable mtd partitions via dt
` [U-Boot] [PATCH v2 19/22] arm: vf610: add uart2 clock/pinmux support
` [U-Boot] [PATCH v2 20/22] colibri_vf: adjust timing according to data sheet
` [U-Boot] [PATCH v2 21/22] colibri_vf: use leveling evaluated by DDR validation tools
` [U-Boot] [PATCH v2 22/22] colibri_vf: fix sdboot for vybrid modules
[U-Boot] [RESEND RFC PATCH v1] MLK-12883 usb: limit USB_MAX_XFER_BLK to 256
2019-03-25 16:19 UTC
[U-Boot] [PATCH v2 0/3] toradex: common: fix/improve config block handling
2019-03-25 16:18 UTC (4+ messages)
` [U-Boot] [PATCH v2 1/3] toradex: configblock: add an -y parameter to 'cfgblock create’
` [U-Boot] [PATCH v2 2/3] toradex: common: unify behaviour when config block is missing
` [U-Boot] [PATCH v2 3/3] tdx-cfg-block: fix off by one issue
[U-Boot] [PATCHv3 0/6] dm: cache: add dm cache driver
2019-03-25 15:19 UTC (7+ messages)
` [U-Boot] [PATCHv3 1/6] Documentation: dts: Add pl310 cache controller dts documentation
` [U-Boot] [PATCHv3 2/6] ARM: pl310: Add macro's for handling tag and data latency mask
` [U-Boot] [PATCHv3 3/6] dm: cache: Create a uclass for cache
` [U-Boot] [PATCHv3 4/6] dm: cache: add the pl310 cache controller driver
` [U-Boot] [PATCHv3 5/6] ARM: socfpga: use the pl310 driver to configure the cache
` [U-Boot] [PATCHv3 6/6] configs: socfpga: add imply pl310 cache controller
[U-Boot] [PATCH] Makefile: Prioritize external dtb if defined
2019-03-25 14:55 UTC
[U-Boot] [PATCH] arm: zynq: Add an info message about post config
2019-03-25 14:54 UTC
[U-Boot] [PATCH] arm64: zynqmp: Add idcode for new RFSoC silicon ZU39DR
2019-03-25 14:53 UTC
[U-Boot] Adding F2FS support
2019-03-25 14:13 UTC (2+ messages)
[U-Boot] [PATCH v2] driver: net: update copyright info
2019-03-25 13:58 UTC (2+ messages)
[U-Boot] [PATCH 1/2] ARM: socfpga: Pull PL310 clearing into common code
2019-03-25 13:53 UTC (3+ messages)
[U-Boot] [PATCH 0/5] Convert Pico i.MX7 to DM
2019-03-25 13:43 UTC (10+ messages)
` [U-Boot] [PATCH 1/5] Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM
` [U-Boot] [PATCH 2/5] pico-imx7d: defconfig: Add DT file hooks
` [U-Boot] [PATCH 3/5] pico-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7
` [U-Boot] [PATCH 4/5] pico-imx7d: Convert DM MMC
` [U-Boot] [PATCH 5/5] pico-imx7d: Increase u-boot size for dfu request
[U-Boot] [PATCH 0/5] Convert Pico i.MX7 to DM
2019-03-25 12:57 UTC (2+ messages)
[U-Boot] [V6 PATCH 3/3] sunxi: Use clrsetbits_le32 instead of multiple instruction
2019-03-25 12:47 UTC
[U-Boot] [PATCH] mmc: correct the HS400 initialization process
2019-03-25 12:28 UTC (6+ messages)
[U-Boot] [PATCH v1 26/26] board: colibri_imx6: check for and report ecc errors in fuses
2019-03-25 12:14 UTC (4+ messages)
` [U-Boot] [U-Boot, v1, "
[U-Boot] [RFC PATCH v1 0/9] Add support for applications of overlays in SPL
2019-03-25 11:58 UTC (5+ messages)
` [U-Boot] [RFC PATCH v1 7/9] spl: fit: Add support for applying DT overlay
[U-Boot] [PATCH v5] board/fsl/lx2160a: Fix MC firmware loading during SD boot
2019-03-25 11:57 UTC
[U-Boot] [V5 3/3] sunxi: Use clrsetbits_le32 instead of multiple instruction
2019-03-25 11:27 UTC
[U-Boot] [PATCH] dm: Add a No-op uclass
2019-03-25 11:24 UTC (3+ messages)
[U-Boot] [PATCH 1/2] fastboot: getvar_partition_{type, size}: Sanitize arguments
2019-03-25 11:00 UTC (3+ messages)
` [U-Boot] [PATCH 2/2] fastboot: getvar_partition_type: Return 'raw' when FS-unaware
[U-Boot] [PATCH v1 1/3] ppc: t2080qds: add usb node
2019-03-25 10:50 UTC (3+ messages)
` [U-Boot] [PATCH v1 2/3] usb: ehci: ppc: adopt 32 bit address
` [U-Boot] [PATCH v1 3/3] configs: enable usb device module in T2080QDS
[U-Boot] [PATCH v1 1/5] ppc: t2080qds: add eSDHC node
2019-03-25 10:49 UTC (5+ messages)
` [U-Boot] [PATCH v1 2/5] mmc: fsl_esdhc: ppc: set sdhc clock
` [U-Boot] [PATCH v1 3/5] mmc: fsl_esdhc: ppc: adopt 32 bit address
` [U-Boot] [PATCH v1 4/5] configs: enable device tree support for T2080QDS
` [U-Boot] [PATCH v1 5/5] configs: enable eSDHC device module in T2080QDS
[U-Boot] [PATCH] core: ofnode: Fix ASAN-reported stack-buffer-overflow in of_get_address
2019-03-25 10:44 UTC (3+ messages)
[U-Boot] [PATCH v4] board/fsl/lx2160a: Fix MC firmware loading during SD boot
2019-03-25 10:37 UTC
[U-Boot] [PATCH v2] board/fsl/lx2160a: Fix MC firmware loading during SD boot
2019-03-25 10:34 UTC
[U-Boot] [PATCH 0/4] add drive strenght and slew rate support for SAM9X60
2019-03-25 10:34 UTC (5+ messages)
` [U-Boot] [PATCH 1/4] pinctrl: at91: add option to use drive strength bits
` [U-Boot] [PATCH 2/4] pinctrl: at91: add drive strength support for SAM9X60
` [U-Boot] [PATCH 3/4] pinctrl: at91: add compatibles for SAM9X60 pin controller
` [U-Boot] [PATCH 4/4] pinctrl: at91: add slewrate support for SAM9X60
[U-Boot] [PATCH v2] armv8: fsl-layerscape: update copyright info
2019-03-25 10:13 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox