messages from 2019-04-26 08:54:57 to 2019-04-26 16:09:07 UTC [more...]
[U-Boot] [PATCH v3 00/13] rockchip: Add new rk3399 boards
2019-04-26 16:09 UTC (17+ messages)
` [U-Boot] [PATCH v3 03/13] rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi
` [U-Boot] [PATCH v3 06/13] rockchip: rk3399: Add Orangepi RK3399 support
[U-Boot] [PATCH v4 00/13] rockchip: Add new rk3399 boards
2019-04-26 15:49 UTC (10+ messages)
` [U-Boot] [PATCH v4 01/13] rockchip: dts: rk3399: Sync rk3399-opp from Linux
` [U-Boot] [PATCH v4 02/13] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2
` [U-Boot] [PATCH v4 03/13] rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi
` [U-Boot] [PATCH v4 04/13] Kconfig: Add default SPL_FIT_GENERATOR for rockchip
` [U-Boot] [PATCH v4 05/13] arm: rockchip: rk3399: Move common configs in Kconfig
` [U-Boot] [PATCH v4 06/13] rockchip: rk3399: Add Orangepi RK3399 support
` [U-Boot] [PATCH v4 07/13] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux
` [U-Boot] [PATCH v4 08/13] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
` [U-Boot] [PATCH v4 09/13] rockchip: rk3399: Add Nanopi M4 board support
[U-Boot] [PATCH] Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig
2019-04-26 15:31 UTC (4+ messages)
[U-Boot] [PATCH v5 01/13] m68k: add basic set of devicetrees
2019-04-26 15:27 UTC (4+ messages)
[U-Boot] [PATCH v3 0/2] add env erase
2019-04-26 15:18 UTC (4+ messages)
` [U-Boot] [PATCH v3 2/2] env: mmc: add erase-function
[U-Boot] [PATCH v3.1 03/13] rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi
2019-04-26 14:32 UTC (10+ messages)
[U-Boot] [PATCH 4/6] arm: mach-omap2: am33xx: Disable EMIF_DEVOFF immediately before hw leveling
2019-04-26 14:11 UTC (5+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 1/4] mini-zed: Add ps7 files so SPL works
2019-04-26 14:11 UTC (10+ messages)
` [U-Boot] [PATCH 2/4] mini-zed: Update mini-zed dts so we can use it for SPL
` [U-Boot] [PATCH 3/4] zynq_minized: Add configuration header file for board specific environment
` [U-Boot] [PATCH 4/4] Update defconfig for minized
[U-Boot] x86: SPI flash broken with SPI NOR
2019-04-26 14:03 UTC (2+ messages)
[U-Boot] EFIBootGuard for CIP and SecureBoot
2019-04-26 13:46 UTC (9+ messages)
[U-Boot] [PATCH 0/5] rk3399: make u-boot-rockchip-with-spl.bin
2019-04-26 13:34 UTC (6+ messages)
` [U-Boot] [PATCH 1/5] arm64: rockchip: dts: rk3399: Create -u-boot.dtsi files
` [U-Boot] [PATCH 2/5] rockchip: rk3399: Get bl31.elf via BL31 env
` [U-Boot] [PATCH 3/5] Kconfig: Add u-boot.itb BUILD_TARGET for Rockchip
` [U-Boot] [PATCH 4/5] Makefile.spl: Create u-boot-spl-rockchip.bin for rk3399
` [U-Boot] [PATCH 5/5] rockchip: rk3399: Create single image using BINMAN
[U-Boot] [PATCH v1 0/2] Use SPL_FIT_IMAGE_TINY to reduce the size the SPL for the am335x_evm
2019-04-26 13:21 UTC (3+ messages)
` [U-Boot] [PATCH v1 1/2] spl: fit: Always enable tracking of os-type if SPL_OS_BOOT is enabled
` [U-Boot] [PATCH v1 2/2] configs: am335x_evm: enable SPL_FIT_IMAGE_TINY
[U-Boot] [PATCH] fs: btrfs: Do not print mount fail message when not btrfs filesystem
2019-04-26 13:11 UTC
[U-Boot] [PATCH 1/5] pinctrl: gpio: Add callback for configuring pin as GPIO
2019-04-26 13:04 UTC (10+ messages)
` [U-Boot] [PATCH 2/5] pinctrl: renesas: Set pin type in sh_pfc_config_mux_for_gpio
` [U-Boot] [PATCH 3/5] pinctrl: renesas: Implement gpio_request_enable/gpio_disable_free
` [U-Boot] [PATCH 4/5] gpio: renesas: Migrate to pinctrl GPIO accessors
` [U-Boot] [PATCH 5/5] pinctrl: renesas: Remove sh_pfc_config_mux_for_gpio()
[U-Boot] [PATCH] pico-imx7d: README: Adjust the binary name after DM conversion
2019-04-26 12:46 UTC (2+ messages)
[U-Boot] [PATCH 1/2] drivers/mtd/spi: Enable 4B opcodes for SPANSION s25fl512s
2019-04-26 12:44 UTC (3+ messages)
` [U-Boot] [EXT] "
[U-Boot] [PATCH v2] fsl_qspi: Improve QSPI driver to incorporate 4 byte commands
2019-04-26 12:40 UTC
[U-Boot] [PATCH] imx: hab: Increase CSF_SIZE for i.MX6 and i.MX7 devices
2019-04-26 12:35 UTC (2+ messages)
[U-Boot] [PATCH 1/2] fdtdec: Use fdt_setprop_u32() for fdtdec_set_phandle()
2019-04-26 12:01 UTC (3+ messages)
` [U-Boot] [PATCH 2/2] fdtdec: Remove fdt_{addr,size}_unpack()
[U-Boot] [PATCH] Makefile.spl: Create u-boot-spl-rockchip.bin for rk3399
2019-04-26 11:56 UTC (3+ messages)
[U-Boot] [PATCH v5 1/2] spl: fix linker size check off-by-one errors
2019-04-26 11:00 UTC (9+ messages)
` [U-Boot] [PATCH v5 2/2] dlmalloc: fix malloc range at end of ram
[U-Boot] Please pull u-boot-marvell/master
2019-04-26 10:58 UTC
[U-Boot] [PATCH RESEND 07/10] clk: imx8: add i.MX8QM clk driver
2019-04-26 10:56 UTC (27+ messages)
` [U-Boot] [U-Boot,RESEND,07/10] "
` [U-Boot] ARM: imx: Fix typo in select option for ZMX25
` [U-Boot] [U-Boot,RESEND,05/10] imx8: add cpu support
` [U-Boot] imx: 8qxp_mek: fix fdt_file and console
` [U-Boot] [U-Boot,2/2] mxc_ocotp: Disable fuse sense for imx8mq B1
` [U-Boot] [U-Boot, 1/2] mxc_ocotp: Update redundancy banks for mx7ulp B0
` [U-Boot] [U-Boot,3/8] imx8qxp: mek: Enable CMD_FUSE
` [U-Boot] [U-Boot, imx-next, v1, 03/14] ARM: Enable CONFIG_DM_MMC and CONFIG_DM_BLK on HSC and DDC boards
` [U-Boot] [U-Boot, RESEND, 03/10] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QM clocks definition
` [U-Boot] [U-Boot,RESEND,10/10] imx: support i.MX8QM MEK board
` [U-Boot] [U-Boot,1/8] imx: sip: add call_imx_sip_ret2
` [U-Boot] [U-Boot, RESEND, 01/10] pinctrl: imx8: add i.MX8QM compatible
` [U-Boot] imx: i.MX8MQ: clear ocotp error bit
` [U-Boot] [U-Boot, imx-next, v1, 11/14] ARM: defconfig: kp_imx53: Enable DM_USB support on HSC|DDC boards
` [U-Boot] [U-Boot, RESEND, 09/10] misc: imx8: scu: add i.MX8QM support
` [U-Boot] [U-Boot, RESEND, 06/10] clk: imx8: split code into common and soc specific part
` [U-Boot] [U-Boot,2/8] imx8: fuse: add fuse driver
` [U-Boot] [U-Boot, RESEND, 04/10] arm: dts: introduce dtsi for i.MX8QM
` [U-Boot] ddr: imx8m: hide i.MX8M DDR options from device driver entry
` [U-Boot] [U-Boot, RESEND, 02/10] dt-bindings: pinctrl: add i.MX8QM pads definition
` [U-Boot] imx8qxp: mek: enable dm-spl for pm
` [U-Boot] imx: add lowlevel init for ARM64
` [U-Boot] [U-Boot,RESEND,08/10] imx8: imx8-pins: add i.MX8QM
` [U-Boot] [U-Boot,8/8] imx8: mek: move HUSH_PARSER to defconfig
[U-Boot] [PATCH] arm: kirkwood: openrd: Mark openrd boards as maintained again
2019-04-26 10:49 UTC (2+ messages)
[U-Boot] [PATCH 1/4 v5] watchdog: Implement generic watchdog_reset() version
2019-04-26 10:48 UTC (8+ messages)
` [U-Boot] [PATCH 2/4 v5] watchdog: cadence: Remove driver specific "timeout-sec" handling
` [U-Boot] [PATCH 3/4 v5] watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup
` [U-Boot] [PATCH 4/4 v5] watchdog: at91sam9_wdt: Remove now superfluous wdt start and reset
[U-Boot] [PATCH] rk8xx: implement poweroff
2019-04-26 10:47 UTC (3+ messages)
[U-Boot] [PATCH] arm: mvebu: turris_omnia: Use thumb instructions in SPL to save space
2019-04-26 10:46 UTC (2+ messages)
[U-Boot] [PATCH v4 1/2] ARM: kirkwood: add db-88f6281-bp board
2019-04-26 10:46 UTC (4+ messages)
` [U-Boot] [PATCH v4 2/2] ARM: kirkwood: enable CONFIG_DM_USB on db-88f6281-bp
[U-Boot] [PATCH v2] arm: kirkwood: lsxl: add note about sata in README
2019-04-26 10:45 UTC (2+ messages)
[U-Boot] [PATCH 1/3] arm: kirkwood: dts: Add openrd-* dtb makefile build targets
2019-04-26 10:44 UTC (6+ messages)
` [U-Boot] [PATCH 2/3] arm: kirkwood: openrd: Remove superfluous CONFIG_ENV_ADDR
` [U-Boot] [PATCH 3/3] arm: kirkwood: openrd: Increase U-Boot size in flash to make it fit
[U-Boot] [PATCH 1/2] mmc: mv_sdhci: add driver model support
2019-04-26 10:42 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] configs: turris_omnia: use MMC driver model
[U-Boot] [PATCH] turris_omnia: fix eeprom/mcu device names
2019-04-26 10:41 UTC (2+ messages)
[U-Boot] [PATCH v2 0/5] colibri imx8qxp 2gb wb it v1.0b module support
2019-04-26 10:39 UTC (16+ messages)
` [U-Boot] [PATCH v2 5/5] board: toradex: add "
[U-Boot] [PATCH 1/2] disk: efi: unify code for finding a valid gpt
2019-04-26 10:31 UTC (6+ messages)
` [U-Boot] [PATCH 2/2] disk: efi: ignore 'IGNOREME' GPT header found on cros eMMCs
[U-Boot] [PATCH 0/5] - Add Ethernet support for stm32mpu
2019-04-26 10:13 UTC (6+ messages)
` [U-Boot] [PATCH 1/5] board: stm32mp1: Add board_interface_eth_init
` [U-Boot] [PATCH 2/5] net: dwc_eth_qos: add Ethernet stm32mp1 support
` [U-Boot] [PATCH 3/5] ARM: dts: stm32: Add Ethernet support on stm32mp1
` [U-Boot] [PATCH 4/5] stm32mp1: Add Ethernet support for stm32mp1 board
` [U-Boot] [PATCH 5/5] configs: stm32mp15: Enable Ethernet feature
[U-Boot] [imx-next PATCH v1 01/14] ARM: Remove HSC|DDC ETH PHY reset code after switching to DM/DTS
2019-04-26 9:55 UTC (30+ messages)
` [U-Boot] [U-Boot, v3] ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warnings
` [U-Boot] [U-Boot, imx-next, v1, 01/14] ARM: Remove HSC|DDC ETH PHY reset code after switching to DM/DTS
` [U-Boot] [U-Boot, imx-next, v1, 08/14] DTS: Enable USB host support (including regulators) on HSC|DDC boards
` [U-Boot] [U-Boot, v2, 11/14] colibri-imx6ull: migrate fec to using driver model
` [U-Boot] [U-Boot, v2, 09/14] colibri-imx6ull: migrate mmc "
` [U-Boot] [U-Boot, imx-next, v1, 12/14] ARM: config: Remove not needed CONFIG_MXC_USB_PORT define
` [U-Boot] [U-Boot, imx-next, v1, 10/14] USB: DM: Convert i.MX5 ehci code to driver model
` [U-Boot] [U-Boot, v2, 05/14] colibri-imx6ull: fix ethernet phy power on
` [U-Boot] [U-Boot, v2, 01/14] tdx-cfg-block: add support for new colibri iMX6ull skus
` [U-Boot] [U-Boot, v2, 4/5] board: toradex: tdx-cfg-block: add new skus
` [U-Boot] [U-Boot, v2, 3/5] board: toradex: tdx-cfg-block: clean-up sku handling
` [U-Boot] [U-Boot,v1] colibri_vf: fix tab vs. spaces
` [U-Boot] [U-Boot, v2, 02/14] tdx-cfg-block: simplify i.MX 6 module detection
` [U-Boot] [U-Boot, imx-next, v1, 14/14] boot.src: Provide dsa_core.blacklist bootarg when booting via NFS
` [U-Boot] [U-Boot, imx-next, v1, 07/14] DTS: Provide USB host DTS description for i.MX53 devices
` [U-Boot] [U-Boot, imx-next, v1, 09/14] ARM: Remove EHCI specific code from HSC|DDC board file
` [U-Boot] [U-Boot, imx-next, v1, 05/14] ARM: Remove non DM/DTS esdhc3 code from HSC|DDC board related files
` [U-Boot] [U-Boot, imx-next, v1, 04/14] ARM: defconfig: Move CONFIG_FSL_ESDHC to Kconfig
` [U-Boot] [U-Boot, v2, 06/14] board: imx6ull: Add disable PMIC_STBY_REQ
` [U-Boot] [U-Boot, v2, 07/14] colibri-imx6ull: configuration clean-up
` [U-Boot] [U-Boot, v2, 04/14] apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide
` [U-Boot] [U-Boot, v1] colibri_vf: fix ethernet by adding explicit phy node
` [U-Boot] [U-Boot, v2, 03/14] colibri-imx6ull: set module variant depending on config block
` [U-Boot] [U-Boot, imx-next, v1, 02/14] DTS: Add esdhc3 device tree description tuning for HSC|DDC boards
` [U-Boot] [U-Boot, v2, 08/14] colibri-imx6ull: migrate pinctrl and regulators to dtb/dm
` [U-Boot] [U-Boot, imx-next, v1, 06/14] ARM: kp_imx53: config: Do not use ${boardtype} to setup update wic file
` [U-Boot] [U-Boot, v2, 10/14] colibri-imx6ull: migrate usb to using driver model
` [U-Boot] [U-Boot, v2, 1/5] misc: imx8: remove duplicates from scfw api
` [U-Boot] [U-Boot, v2, 2/5] arm: dts: imx8dx: add lpuart1, lpuart2, lpuart3
[U-Boot] [PATCH] ARM: omap3_logic: Enable UUID
2019-04-26 9:45 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH V2 4/5] pico-imx7d: Convert DM MMC
2019-04-26 9:45 UTC (2+ messages)
` [U-Boot] [U-Boot,V2,4/5] "
[U-Boot] [PATCH V2 2/5] pico-imx7d: defconfig: Add DT file hooks
2019-04-26 9:38 UTC (2+ messages)
` [U-Boot] [U-Boot,V2,2/5] "
[U-Boot] [PATCH V2 3/5] pico-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7
2019-04-26 9:38 UTC (2+ messages)
` [U-Boot] [U-Boot, V2, "
[U-Boot] [PATCH v2 11/14] colibri-imx6ull: migrate fec to using driver model
2019-04-26 9:38 UTC (5+ messages)
` [U-Boot] [U-Boot, v3, 14/14] ARM: dts: colibri-imx6ull: update device tree
` [U-Boot] [U-Boot, v2, 12/14] ARM: dts: colibri-imx6ull: fix uart-has-rtscts property
` [U-Boot] [U-Boot, v3, 13/14] ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl
` [U-Boot] [U-Boot, imx-next, v1, 13/14] Convert CONFIG_USB_EHCI_MX5 to Kconfig
[U-Boot] [PATCH] ARM: imx6q_logic: Allow storing environment in FAT on eMMC
2019-04-26 9:38 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v2 1/1] colibri_imx6: use UUID for rootfs
2019-04-26 9:38 UTC (2+ messages)
` [U-Boot] [U-Boot,v2,1/1] "
[U-Boot] [PATCH v2 2/2] warp7: Switch to DM USB
2019-04-26 9:38 UTC (2+ messages)
` [U-Boot] [U-Boot,v2,2/2] "
[U-Boot] [PATCH v2 1/2] warp7: Switch to DM Serial
2019-04-26 9:38 UTC (2+ messages)
` [U-Boot] [U-Boot,v2,1/2] "
[U-Boot] [PATCH] imx: Add variscite DART-6UL Evaluation Kit
2019-04-26 9:38 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] warp7: Fix dfu_alt_info setting after DM conversion
2019-04-26 9:37 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH V2 5/5] pico-imx7d: Increase u-boot size for dfu request
2019-04-26 9:37 UTC (2+ messages)
` [U-Boot] [U-Boot, V2, "
[U-Boot] [PATCH V2 1/5] Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM
2019-04-26 9:37 UTC (2+ messages)
` [U-Boot] [U-Boot, V2, "
[U-Boot] [PATCH] ARM: imx6q_logic: Allow optional arguments to cmd line
2019-04-26 9:37 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] dts: imx6ull: add USB aliases to support DM
2019-04-26 9:37 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v2 1/2] ARM: imx6: DHCOM i.MX6 PDK: use Kconfig for inclusion of DDR calibration
2019-04-26 9:37 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH v2 2/2] ARM: imx6: update 1GB DDR3 calibration for DHCOM i.MX6qd PDK
2019-04-26 9:36 UTC (2+ messages)
` [U-Boot] [U-Boot, v2, "
[U-Boot] [PATCH] riscv: qemu: Use correct SYS_TEXT_BASE for S-mode on 32bit system
2019-04-26 9:35 UTC (2+ messages)
[U-Boot] [PULL] u-boot-socfpga/master
2019-04-26 9:31 UTC
[U-Boot] [PATCH] MMC HW partition switching must also invalidate the cache
2019-04-26 9:27 UTC (2+ messages)
[U-Boot] [PATCH 5/5] MAINTAINERS: change spi driver entry
2019-04-26 9:22 UTC
[U-Boot] [PATCH 4/5] arm: dts: change MT7629 to use spi-mem rather than qspi
2019-04-26 9:22 UTC
[U-Boot] [PATCH 3/5] spi: add spi-mem driver for MediaTek MT7629 SoC
2019-04-26 9:22 UTC
[U-Boot] [PATCH 2/5] spi: remove obsolete mtk_qspi driver
2019-04-26 9:22 UTC
[U-Boot] [PATCH 1/5] mtd: spi-nor: fix page program issue when using spi-mem driver
2019-04-26 9:22 UTC
[U-Boot] [PATCH 0/5] Add spi-mem driver for MediaTek MT7629 SoC
2019-04-26 9:21 UTC
[U-Boot] [PATCH v2 0/3] ARM: meson: Add G12A USB Support
2019-04-26 9:18 UTC (5+ messages)
` [U-Boot] [PATCH v2 3/3] mach-meson: g12a: add DWC2 peripheral mode support
[U-Boot] RSA in U-Boot
2019-04-26 9:05 UTC (3+ messages)
[U-Boot] [PATCH 1/2] board: engicam: Handle mmc recovery partition, root
2019-04-26 9:01 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] configs: imx6-engicam: Update the recoveryboot setting
[U-Boot] [PATCH] ddr: imx8m: hide i.MX8M DDR options from device driver entry
2019-04-22 10:41 UTC
[U-Boot] [PATCH v3 14/14] ARM: dts: colibri-imx6ull: update device tree
2019-04-17 23:57 UTC
[U-Boot] [PATCH v3 13/14] ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl
2019-04-17 23:57 UTC
[U-Boot] [PATCH v3] ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warnings
2019-04-17 23:47 UTC
[U-Boot] [PATCH 2/2] mxc_ocotp: Disable fuse sense for imx8mq B1
2019-04-17 9:41 UTC
[U-Boot] [PATCH 1/2] mxc_ocotp: Update redundancy banks for mx7ulp B0
2019-04-17 9:41 UTC
[U-Boot] [PATCH] imx: i.MX8MQ: clear ocotp error bit
2019-04-17 9:41 UTC
[U-Boot] [PATCH] imx: 8qxp_mek: fix fdt_file and console
2019-04-15 12:00 UTC
[U-Boot] [PATCH] imx: add lowlevel init for ARM64
2019-04-15 5:20 UTC
[U-Boot] [PATCH] ARM: imx: Fix typo in select option for ZMX25
2019-04-13 8:21 UTC
[U-Boot] [PATCH 8/8] imx8: mek: move HUSH_PARSER to defconfig
2019-04-12 7:55 UTC
[U-Boot] [PATCH 3/8] imx8qxp: mek: Enable CMD_FUSE
2019-04-12 7:54 UTC
[U-Boot] [PATCH 2/8] imx8: fuse: add fuse driver
2019-04-12 7:54 UTC
[U-Boot] [PATCH 1/8] imx: sip: add call_imx_sip_ret2
2019-04-12 7:54 UTC
[U-Boot] [PATCH v2 4/5] board: toradex: tdx-cfg-block: add new skus
2019-04-09 15:25 UTC
[U-Boot] [PATCH v2 3/5] board: toradex: tdx-cfg-block: clean-up sku handling
2019-04-09 15:25 UTC
[U-Boot] [PATCH v2 2/5] arm: dts: imx8dx: add lpuart1, lpuart2, lpuart3
2019-04-09 15:25 UTC
[U-Boot] [PATCH v2 1/5] misc: imx8: remove duplicates from scfw api
2019-04-09 15:25 UTC
[U-Boot] [PATCH v2 12/14] ARM: dts: colibri-imx6ull: fix uart-has-rtscts property
2019-04-09 15:24 UTC
[U-Boot] [PATCH v2 10/14] colibri-imx6ull: migrate usb to using driver model
2019-04-09 15:24 UTC
[U-Boot] [PATCH v2 09/14] colibri-imx6ull: migrate mmc to using driver model
2019-04-09 15:24 UTC
[U-Boot] [PATCH v2 08/14] colibri-imx6ull: migrate pinctrl and regulators to dtb/dm
2019-04-09 15:24 UTC
[U-Boot] [PATCH v2 07/14] colibri-imx6ull: configuration clean-up
2019-04-09 15:24 UTC
[U-Boot] [PATCH v2 06/14] board: imx6ull: Add disable PMIC_STBY_REQ
2019-04-09 15:24 UTC
[U-Boot] [PATCH v2 05/14] colibri-imx6ull: fix ethernet phy power on
2019-04-09 15:24 UTC
[U-Boot] [PATCH v2 04/14] apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide
2019-04-09 15:24 UTC
[U-Boot] [PATCH v2 03/14] colibri-imx6ull: set module variant depending on config block
2019-04-09 15:24 UTC
[U-Boot] [PATCH v2 02/14] tdx-cfg-block: simplify i.MX 6 module detection
2019-04-09 15:24 UTC
[U-Boot] [PATCH v2 01/14] tdx-cfg-block: add support for new colibri iMX6ull skus
2019-04-09 15:24 UTC
[U-Boot] [imx-next PATCH v1 14/14] boot.src: Provide dsa_core.blacklist bootarg when booting via NFS
2019-04-04 10:26 UTC
[U-Boot] [imx-next PATCH v1 13/14] Convert CONFIG_USB_EHCI_MX5 to Kconfig
2019-04-04 10:26 UTC
[U-Boot] [imx-next PATCH v1 12/14] ARM: config: Remove not needed CONFIG_MXC_USB_PORT define
2019-04-04 10:26 UTC
[U-Boot] [imx-next PATCH v1 11/14] ARM: defconfig: kp_imx53: Enable DM_USB support on HSC|DDC boards
2019-04-04 10:26 UTC
[U-Boot] [imx-next PATCH v1 10/14] USB: DM: Convert i.MX5 ehci code to driver model
2019-04-04 10:26 UTC
[U-Boot] [imx-next PATCH v1 09/14] ARM: Remove EHCI specific code from HSC|DDC board file
2019-04-04 10:26 UTC
[U-Boot] [imx-next PATCH v1 08/14] DTS: Enable USB host support (including regulators) on HSC|DDC boards
2019-04-04 10:26 UTC
[U-Boot] [imx-next PATCH v1 07/14] DTS: Provide USB host DTS description for i.MX53 devices
2019-04-04 10:26 UTC
[U-Boot] [imx-next PATCH v1 06/14] ARM: kp_imx53: config: Do not use ${boardtype} to setup update wic file
2019-04-04 10:26 UTC
[U-Boot] [imx-next PATCH v1 05/14] ARM: Remove non DM/DTS esdhc3 code from HSC|DDC board related files
2019-04-04 10:26 UTC
[U-Boot] [imx-next PATCH v1 04/14] ARM: defconfig: Move CONFIG_FSL_ESDHC to Kconfig
2019-04-04 10:26 UTC
[U-Boot] [imx-next PATCH v1 03/14] ARM: Enable CONFIG_DM_MMC and CONFIG_DM_BLK on HSC and DDC boards
2019-04-04 10:26 UTC
[U-Boot] [imx-next PATCH v1 02/14] DTS: Add esdhc3 device tree description tuning for HSC|DDC boards
2019-04-04 10:26 UTC
[U-Boot] [PATCH v1] colibri_vf: fix tab vs. spaces
2019-03-28 22:25 UTC
[U-Boot] [PATCH v1] colibri_vf: fix ethernet by adding explicit phy node
2019-03-28 22:24 UTC
[U-Boot] [PATCH] imx8qxp: mek: enable dm-spl for pm
2019-03-07 12:43 UTC
[U-Boot] [PATCH RESEND 10/10] imx: support i.MX8QM MEK board
2019-03-05 2:32 UTC
[U-Boot] [PATCH RESEND 09/10] misc: imx8: scu: add i.MX8QM support
2019-03-05 2:32 UTC
[U-Boot] [PATCH RESEND 08/10] imx8: imx8-pins: add i.MX8QM
2019-03-05 2:32 UTC
[U-Boot] [PATCH RESEND 06/10] clk: imx8: split code into common and soc specific part
2019-03-05 2:32 UTC
[U-Boot] [PATCH RESEND 05/10] imx8: add cpu support
2019-03-05 2:32 UTC
[U-Boot] [PATCH RESEND 04/10] arm: dts: introduce dtsi for i.MX8QM
2019-03-05 2:32 UTC
[U-Boot] [PATCH RESEND 03/10] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QM clocks definition
2019-03-05 2:32 UTC
[U-Boot] [PATCH RESEND 02/10] dt-bindings: pinctrl: add i.MX8QM pads definition
2019-03-05 2:32 UTC
[U-Boot] [PATCH RESEND 01/10] pinctrl: imx8: add i.MX8QM compatible
2019-03-05 2:32 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox