messages from 2019-05-23 19:45:33 to 2019-05-26 10:49:52 UTC [more...]
[U-Boot] [PATCH v5 01/13] m68k: add basic set of devicetrees
2019-05-26 10:49 UTC (10+ messages)
` [U-Boot] [PATCH v5 02/13] m68k: architecture changes to support fdt
` [U-Boot] [PATCH v5 03/13] m68k: add initial dts files for all m68k boards
` [U-Boot] [PATCH v5 04/13] m68k: enabling long jumps on mcf54x5 SoCs
` [U-Boot] [PATCH v5 05/13] configs: enable use of DT for all m68k boards
[U-Boot] [PULL] u-boot-mips
2019-05-26 10:49 UTC (2+ messages)
[U-Boot] [PULL] u-boot-stm32 for v2019.07 (round 4)
2019-05-26 10:49 UTC (2+ messages)
[U-Boot] Please pull u-boot-fsl-qoriq master
2019-05-26 10:48 UTC (2+ messages)
[U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms
2019-05-26 10:45 UTC (14+ messages)
[U-Boot] [PATCH v2 0/2] mxc_spi: DM improvements
2019-05-26 10:15 UTC (3+ messages)
` [U-Boot] [PATCH v2 1/2] spi: imx: remove doubled pointer from mxc_spi_probe
` [U-Boot] [PATCH v2 2/2] spi: imx: work with cs greater 0
[U-Boot] [PATCH] clk: sifive: fu540-prci: align primary DT match string to the DT bindings
2019-05-26 9:13 UTC
[U-Boot] [PATCH v4] sun8i: h3: Add support for the Beelink-x2 STB
2019-05-26 6:42 UTC (2+ messages)
` [U-Boot] [linux-sunxi] "
[U-Boot] [PATCH] usb: musb-new: Fix Inventra DMA support
2019-05-26 1:40 UTC
[U-Boot] [PATCH 1/2] spl: Move SPL_MMC_TINY option to appear under SPL menu
2019-05-25 22:25 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] mmc: Register only the first MMC device on MMC_TINY
[U-Boot] [PATCH] wandboard: Rework Makefile to prevent spl.o from being built
2019-05-25 22:19 UTC
[U-Boot] [PATCH v6] ARM: am335x: Add phyCORE AM335x R2 support
2019-05-25 21:00 UTC (3+ messages)
[U-Boot] [PATCH] Kconfig: Fix SPL_LOAD_FIT description
2019-05-25 20:53 UTC
[U-Boot] [PATCH] gpio: pca953x: Add TI TCA9539 compatible string
2019-05-25 20:52 UTC
[U-Boot] [PATCH] spl: dfu: Fix printed variable name
2019-05-25 20:50 UTC
[U-Boot] [PATCH RESEND 0/1] Add ps7_init_gpl.c for Z-turn board
2019-05-25 20:46 UTC (2+ messages)
` [U-Boot] [PATCH RESEND 1/1] "
[U-Boot] [PATCH] arm: mach-omap2: am33xx: Init pinmux before clock
2019-05-25 20:40 UTC
[U-Boot] [PATCH 1/2] Convert CONFIG_NAND to Kconfig
2019-05-25 15:41 UTC (2+ messages)
` [U-Boot] [U-Boot,1/2] "
[U-Boot] [PATCH v2 0/2] Add 'bcb' command to read/modify/write Android BCB
2019-05-25 9:22 UTC (13+ messages)
` [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields
[U-Boot] [PATCH] rockchip: rk3399: Add Khadas Edge board support
2019-05-25 5:57 UTC (4+ messages)
[U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size
2019-05-24 22:36 UTC (4+ messages)
[U-Boot] [PATCH v3] spl: add overall SPL size check
2019-05-24 20:10 UTC (2+ messages)
[U-Boot] Cannot boot mx6qsabred with 2019.07-rc2
2019-05-24 20:08 UTC (22+ messages)
[U-Boot] Making U-Boot smaller
2019-05-24 19:59 UTC (11+ messages)
[U-Boot] Pull request: u-boot-spi/master
2019-05-24 19:34 UTC (3+ messages)
[U-Boot] [PATCH 0/2] efi_loader: implement deprecated Unicode collation protocol
2019-05-24 18:52 UTC (6+ messages)
[U-Boot] [PATCH v2] cmd: env: print a message when setting UEFI variable failed
2019-05-24 18:38 UTC (2+ messages)
[U-Boot] [PATCH v8 1/3] rockchip: rk3399: Add Nanopi NEO4 board support
2019-05-24 18:28 UTC (3+ messages)
` [U-Boot] [PATCH v8 3/3] rockchip: rk3399: Add Rock PI 4 support
[U-Boot] [PATCH v2 0/7] sound: Add sound support for Nyan
2019-05-24 17:17 UTC (4+ messages)
[U-Boot] [PATCH] cmd: nvedit: Add sub-command 'env info'
2019-05-24 15:20 UTC
[U-Boot] [PATCH 0/2] ARM: davinci: omapl138_lcdk: fix MMC/SD boot breakage
2019-05-24 15:04 UTC (8+ messages)
` [U-Boot] [PATCH 2/2] ARM: davinci: SPL: fix BSS initialization
[U-Boot] [PATCH v2 0/3] efi_loader: variable: attributes may not be changed if a variable exists
2019-05-24 14:54 UTC (7+ messages)
` [U-Boot] [PATCH v2 1/3] efi: selftest: APPEND_WRITE is not supported
` [U-Boot] [PATCH v2 2/3] efi_loader: variable: return error for APPEND_WRITE
` [U-Boot] [PATCH v2 3/3] efi_loader: variable: attributes may not be changed if a variable exists
[U-Boot] [PATCH v2 1/5] spl: dm: disable SPI DM flash for non-DM SPL
2019-05-24 14:24 UTC (6+ messages)
` [U-Boot] [PATCH v2 2/5] dm: spi: Convert Freescale ESPI driver to driver model
` [U-Boot] [PATCH v2 3/5] powerpc: dts: t2080: add espi controller node support
` [U-Boot] [PATCH v2 4/5] powerpc: dts: t2080qds: add espi slave nodes support
` [U-Boot] [PATCH v2 5/5] configs: enable espi device module in T2080QDS
[U-Boot] [PATCH] mips: mt7688: gardena-smart-gateway-mt7688: Enable CMD_WDT
2019-05-24 14:14 UTC (2+ messages)
[U-Boot] [PATCH 1/2 v2] mips: mt76xx: Remove cache workaround and select SYS_MALLOC_CLEAR_ON_INIT
2019-05-24 14:14 UTC (4+ messages)
` [U-Boot] [PATCH 2/2 v2] mips: mt76xx: gardena-smart-gateway: Enable CONFIG_USE_PREBOOT
[U-Boot] [PATCHv2 0/8] dm: pci: add Freescale PowerPC PCIe driver
2019-05-24 14:12 UTC (13+ messages)
` [U-Boot] [PATCHv2 8/8] configs: T2080QDS: Enable "
` [U-Boot] [EXT] "
[U-Boot] [PATCH v2 1/3] arm64: zynqmp: xil_io.h: declare functions as static
2019-05-24 13:40 UTC (3+ messages)
` [U-Boot] [PATCH v2 2/3] arm64: zynqmp: add tool to minimize psu_init_gpl.c files
` [U-Boot] [PATCH v2 3/3] arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit
[U-Boot] [PATCH 1/3] arm64: zynqmp: xil_io.h: declare functions as static
2019-05-24 13:24 UTC (6+ messages)
` [U-Boot] [PATCH 3/3] arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit
[U-Boot] [PATCH] imx: Select the pinctrl drivers when DM is used
2019-05-24 13:02 UTC (2+ messages)
[U-Boot] [PATCH v2 u-boot-marvell 0/7] More fixes for Turris Omnia
2019-05-24 12:57 UTC (8+ messages)
` [U-Boot] [PATCH v2 u-boot-marvell 1/7] arm: mvebu: turris_omnia: set default ethernet adapter
` [U-Boot] [PATCH v2 u-boot-marvell 2/7] arm: mvebu: turris_omnia: fix adapters MAC addresses
` [U-Boot] [PATCH v2 u-boot-marvell 3/7] arm: mvebu: turris_omnia: change environment address in SPI flash
` [U-Boot] [PATCH v2 u-boot-marvell 4/7] arm: mvebu: turris_omnia: remove unneeded macro from board config
` [U-Boot] [PATCH v2 u-boot-marvell 5/7] arm: mvebu: turris_omnia: prefer SCSI booting before USB
` [U-Boot] [PATCH v2 u-boot-marvell 6/7] arm: mvebu: turris_omnia: call pci_init from board init code
` [U-Boot] [PATCH v2 u-boot-marvell 7/7] arm: mvebu: turris_omnia: fix rescue mode bootcmd bootargs setting
[U-Boot] [PATCH] Arm: dts: socfpga: Remove invalid property from chose node
2019-05-24 12:20 UTC (2+ messages)
[U-Boot] [PATCH] reset: socfpga: release more A10 peripherals out of reset
2019-05-24 12:16 UTC (6+ messages)
[U-Boot] [PATCH PATCH v3 00/12] Add support for applications of overlays in SPL
2019-05-24 11:29 UTC (3+ messages)
` [U-Boot] [PATCH PATCH v3 01/12] spl: fit: Add support for applying DT overlay
[U-Boot] [PATCH] rockchip: rk3399: Add Khadas Edge board support
2019-05-24 11:29 UTC
[U-Boot] [PATCH] armv8: fsl-layerscape: Update qspi clk cfg
2019-05-24 10:50 UTC
[U-Boot] [PATCH v3 0/5] dm: spi: Convert Freescale ESPI driver to driver
2019-05-24 9:47 UTC (6+ messages)
` [U-Boot] [PATCH v3 1/5] spl: dm: disable SPI DM flash for non-DM SPL
` [U-Boot] [PATCH v3 2/5] dm: spi: Convert Freescale ESPI driver to driver model
` [U-Boot] [PATCH v3 3/5] powerpc: dts: t2080: add espi controller node support
` [U-Boot] [PATCH v3 4/5] powerpc: dts: t2080qds: add espi slave nodes support
` [U-Boot] [PATCH v3 5/5] configs: enable espi device module in T2080QDS
[U-Boot] [PATCH] riscv: add Kconfig entries for the F and D ISA extensions support
2019-05-24 9:40 UTC (8+ messages)
` [U-Boot] Fwd: "
[U-Boot] [PATCH v2 1/3] dm: i2c: Add a flag that needs to generate a stop bit
2019-05-24 8:55 UTC (4+ messages)
` [U-Boot] [PATCH v2 2/3] i2c: mxc_i2c: The i2c controller generates a stop signal before reading the register data
` [U-Boot] [PATCH v2 3/3] rtc: pcf2127: Fixed bug with rtc settings and getting error time
[U-Boot] [PATCH] arm: exynos: odroid: Fix the confict scripaddr extra env setting
2019-05-24 8:51 UTC
[U-Boot] [PATCH 1/5] colibri_imx7: use UUID for rootfs
2019-05-24 8:04 UTC (11+ messages)
` [U-Boot] [PATCH 2/5] colibri-imx6ull: "
` [U-Boot] [PATCH 3/5] colibri_vf: "
` [U-Boot] [PATCH 4/5] apalis_imx6: "
` [U-Boot] [PATCH 5/5] apalis-tk1: "
[U-Boot] efi_loader: efi_runtime_detach()?
2019-05-24 7:17 UTC (3+ messages)
[U-Boot] [PATCH v2] efi_loader: bootmgr: print a message when loading from BootNext failed
2019-05-24 6:59 UTC
[U-Boot] [PATCH] configs: sama5d2_ptc_ek: fix NAND PMECC_CAP
2019-05-24 6:54 UTC (2+ messages)
[U-Boot] [PATCH 1/2] spl: at91: add support for SPL_AT91_MCK_BYPASS
2019-05-24 6:47 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] configs: at91: sama5d2_icp: enable CONFIG_SPL_AT91_MCK_BYPASS and resync
[U-Boot] [PATCH] armv8: ls1028a: Add secure boot defconfig
2019-05-24 6:36 UTC
[U-Boot] [PATCH 1/1] efi_loader: DEL is an illegal file name character
2019-05-24 5:22 UTC
[U-Boot] EFI_SPECIFICATION_VERSION
2019-05-24 5:16 UTC (2+ messages)
[U-Boot] [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs
2019-05-24 5:12 UTC (8+ messages)
` [U-Boot] [PATCH 2/4] ppc: t2080qds: add sata node
` [U-Boot] [PATCH 3/4] powerpc: mpc85xx: delete FSL_SATA for T2080QDS board
` [U-Boot] [PATCH 4/4] configs: enable sata device module in T2080QDS
[U-Boot] [PATCH v3 1/8] ppc: t2080qds: add eSDHC node
2019-05-24 5:11 UTC (16+ messages)
` [U-Boot] [PATCH v3 2/8] mmc: fsl_esdhc: ppc: set sdhc clock
` [U-Boot] [PATCH v3 3/8] mmc: fsl_esdhc: ppc: adopt 32 bit address
` [U-Boot] [PATCH v3 4/8] configs: enable device tree support for T2080QDS
` [U-Boot] [PATCH v3 5/8] configs: enable eSDHC device module in T2080QDS
` [U-Boot] [PATCH v3 6/8] ppc: t2080qds: add usb node
` [U-Boot] [PATCH v3 7/8] usb: ehci: ppc: adopt 32 bit address
` [U-Boot] [PATCH v3 8/8] configs: enable usb device module in T2080QDS
[U-Boot] [PATCH v2 0/5] fs: fat: fixes for write under root directory
2019-05-24 5:10 UTC (6+ messages)
` [U-Boot] [PATCH v2 1/5] fs: fat: write to non-cluster-aligned "
` [U-Boot] [PATCH v2 2/5] fs: fat: flush a directory cluster properly
` [U-Boot] [PATCH v2 3/5] fs: fat: allocate a new cluster for root directory of fat32
` [U-Boot] [PATCH v2 4/5] test/py: test_fs: add tests for creating/deleting many files
` [U-Boot] [PATCH v2 5/5] test/py: clarify a package dependency for test_fs
[U-Boot] [PATCH 1/1] fs: fat: correct file name normalization
2019-05-24 5:08 UTC (3+ messages)
[U-Boot] [PATCH 1/7] armv8: lx2160a: The lx2160a platform supports the I2C driver model
2019-05-24 5:03 UTC (12+ messages)
` [U-Boot] [PATCH 3/7] armv8: dts: fsl-lx2160a: add i2c controller and gpio DT nodes
` [U-Boot] [PATCH 4/7] armv8: lx2160ardb : Add pcf2127 node
` [U-Boot] [PATCH 5/7] drivers: i2c: mxc: Solve the compiler error when using i2c dm mode
` [U-Boot] [PATCH 6/7] gpio: do not include <asm/arch/gpio.h> on ARCH_LX2160A
` [U-Boot] [PATCH 7/7] armv8: lx2160ardb : Add slave nodes under the i2c0 controller
[U-Boot] [PATCH 0/3] Intel FPGA PCIe fixes
2019-05-24 2:30 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] pci: intel: Increase TLP polling counter
` [U-Boot] [PATCH 2/3] pci: intel: Fix error when enumerating multi-function PCIe device
` [U-Boot] [PATCH 3/3] pci: intel: Fix configuration type based on secondary number
[U-Boot] [PATCH 0/6] imx8: support container
2019-05-24 1:59 UTC (18+ messages)
` [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file
` [U-Boot] [EXT] "
[U-Boot] [PATCH v3 0/3] Add 'bcb' command to read/modify/write Android BCB
2019-05-23 22:58 UTC (2+ messages)
[U-Boot] [PATCH] gpio: dwapb_gpio: fix broken dev->node
2019-05-23 22:00 UTC (2+ messages)
[U-Boot] [PATCH v2] spl: add overall SPL size check
2019-05-23 20:16 UTC (5+ messages)
[U-Boot] [PATCH 0/7] Switch WaRP7 BL33 to mbed Linux specific bootflow
2019-05-23 19:56 UTC (10+ messages)
` [U-Boot] [PATCH 3/7] warp7: include: configs: Differentiate bootscript address from loadaddr
[U-Boot] [PATCH] net: mscc: serval: Remove delay when serdes is configured
2019-05-23 19:45 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox