messages from 2019-07-02 02:32:00 to 2019-07-02 20:08:33 UTC [more...]
[U-Boot] [PATCH v2] video: backlight: fix pwm invertation
2019-07-02 20:08 UTC
[U-Boot] [PATCH v2 1/9] usb: r8a66597: return -ENOTSUPP from unimplemented submit_int_msg
2019-07-02 19:35 UTC (11+ messages)
` [U-Boot] [PATCH v2 2/9] usb: sl811-hcd: "
` [U-Boot] [PATCH v2 3/9] usb_kdb: only process events succesfully received
` [U-Boot] [PATCH v2 4/9] usb: usb_submit_int_msg -> usb_int_msg
` [U-Boot] [PATCH v2 5/9] usb: storage: submit_int_msg "
` [U-Boot] [PATCH v2 6/9] usb: Add nonblock argument to submit_int_msg
` [U-Boot] [PATCH v2 7/9] usb: add usb_int_msg_nonblock
` [U-Boot] [PATCH v2 8/9] usb: kbd: use usb_int_msg_nonblock for polling
` [U-Boot] [PATCH v2 9/9] dwc2: use the nonblock argument in submit_int_msg
[U-Boot] [PATCH 1/8] usb: r8a66597: return -ENOTSUPP from unimplemented submit_int_msg
2019-07-02 19:31 UTC (23+ messages)
` [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
` [U-Boot] [PATCH 6/8] usb: add usb_submit_int_msg_nonblock
[U-Boot] [PATCH] drivers: net: phy: Ignore PHY ID 0 during PHY probing
2019-07-02 19:11 UTC (5+ messages)
[U-Boot] [PATCH v9 0/9] Update SiFive Unleashed Drivers
2019-07-02 19:01 UTC (2+ messages)
[U-Boot] efi_loader: test_efi_grub_net()
2019-07-02 18:59 UTC (4+ messages)
[U-Boot] [PATCH] test/py: gpt: Use long options for sgdisk
2019-07-02 18:35 UTC (2+ messages)
[U-Boot] What if ATF can be part of U-Boot source, like SPL?
2019-07-02 18:32 UTC (5+ messages)
[U-Boot] [PATCH] test/py: avb: Move AVB test to android dir
2019-07-02 18:18 UTC
[U-Boot] [PATCH] doc: Move fastboot protocol doc to android dir
2019-07-02 18:14 UTC
[U-Boot] [PATCH v3 0/3] Add 'bcb' command to read/modify/write Android BCB
2019-07-02 18:11 UTC (3+ messages)
` [U-Boot] [PATCH v3 3/3] doc: relocate/rename Android README and add BCB overview
[U-Boot] [PATCH v4 0/6] android: implement A/B boot process
2019-07-02 18:00 UTC (10+ messages)
` [U-Boot] [PATCH v4 1/6] disk: part: Extend API to get partition info
` [U-Boot] [PATCH v4 2/6] common: Implement A/B metadata
` [U-Boot] [PATCH v4 3/6] cmd: Add 'ab_select' command
` [U-Boot] [PATCH v4 4/6] test/py: Add base test case for A/B updates
` [U-Boot] [PATCH v4 5/6] doc: android: Add simple guide "
` [U-Boot] [PATCH v4 6/6] env: am57xx: Implement A/B boot process
[U-Boot] [PATCH 1/2] env: ti: Increase boot partition
2019-07-02 17:56 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] arm: am57xx: Allow bootm to load larger kernels
[U-Boot] [PATCH v3 0/6] ls1028a: networking support
2019-07-02 17:49 UTC (7+ messages)
` [U-Boot] [PATCH 1/6 v3] include: configs: ls1028a: set SYS_RX_ETH_BUFFER to 8
` [U-Boot] [PATCH 6/6 v3] configs: ls1028a: enable networking options in rds, qds defconfig
[U-Boot] [BUG] Wandboard fails to boot via U-Boot bootefi, GRUB
2019-07-02 17:35 UTC (5+ messages)
[U-Boot] [ANN] U-Boot v2019.07-rc4 released
2019-07-02 17:03 UTC (8+ messages)
` [U-Boot] [U-Boot-Board-Maintainers] "
` [U-Boot] [U-Boot-Custodians] "
[U-Boot] [PATCH 1/1] efi_loader: bump UEFI specification number to 2.8
2019-07-02 16:19 UTC (2+ messages)
[U-Boot] [PATCH 1/1] efi_loader: correct signature of ConvertPointer()
2019-07-02 16:19 UTC (2+ messages)
[U-Boot] [PATCH 1/1] efi_selftest: description of CMD_BOOTEFI_SELFTEST
2019-07-02 16:18 UTC (2+ messages)
[U-Boot] [PATCH] ARM: da850evm: Remove legacy OHCI referencs and unify platform
2019-07-02 15:36 UTC
[U-Boot] [RFC PATCH] qemu-x86: Use config_distro_bootcmd
2019-07-02 15:31 UTC (4+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH v2 8/8] x86: Skip setting up MTRRs in slimbootloader
2019-07-02 14:13 UTC (2+ messages)
[U-Boot] [PATCH v2 7/8] board: Add new slimbootloader board
2019-07-02 14:13 UTC (2+ messages)
[U-Boot] [PATCH v2 4/8] x86: slimbootloader: Add serial driver
2019-07-02 14:13 UTC (2+ messages)
[U-Boot] [PATCH v2 3/8] x86: slimbootloader: Add memory configuration
2019-07-02 14:13 UTC (2+ messages)
[U-Boot] [PATCH v2 2/8] x86: slimbootloader: Add a function to access HOB
2019-07-02 14:13 UTC (2+ messages)
[U-Boot] [PATCH v2 1/8] x86: Add new slimbootloader CPU type
2019-07-02 14:13 UTC (2+ messages)
[U-Boot] [PATCH] ARCH: imx: Call sata_remove() not on imx6 duallite/solo boards
2019-07-02 13:10 UTC
[U-Boot] [PATCH v3 1/3] ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite
2019-07-02 13:09 UTC (6+ messages)
` [U-Boot] [PATCH v3 2/3] ARM: dts: imx: dh-imx6: Add DHCOM iMX6 Duallite PDK2 device tree
` [U-Boot] [PATCH v3 3/3] ARM: imx6: DHCOM i.MX6 PDK: config SPL to load U-Boot fitImage with mulitple DTs
[U-Boot] [RESEND PATCH v3 00/18] Improvement for the DWC3 USB generic driver and fixes for the K2 platforms
2019-07-02 12:32 UTC (7+ messages)
` [U-Boot] [RESEND PATCH v3 13/18] usb: dwc3: Kconfig: get rid of obsolete mode selection
[U-Boot] [PATCH v3] cmd: mem: Add a command to fill the memory with random data
2019-07-02 12:23 UTC
[U-Boot] [PATCH v2] cmd: mem: Add a command to fill the memory with random data
2019-07-02 12:03 UTC (3+ messages)
[U-Boot] Fix read error in fsl_qspi driver
2019-07-02 11:43 UTC (6+ messages)
` [U-Boot] [PATCH 1/2] drivers/spi: fsl_qspi: fix read timeout
` [U-Boot] [PATCH 2/2] drivers/spi: fsl_qspi: improve timeout calculation
[U-Boot] [PATCH 1/3] ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite
2019-07-02 11:34 UTC (4+ messages)
` [U-Boot] [PATCH 2/3] ARM: dts: imx: dh-imx6: Add DHCOM iMX6 Duallite PDK2 device tree
` [U-Boot] [PATCH 3/3] ARM: imx6: DHCOM i.MX6 PDK: config SPL to load U-Boot fitImage with mulitple DTs
[U-Boot] [PATCH 0/3] stm32mp1: add OP-TEE configuration and associated MTD partitions
2019-07-02 11:26 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] stm32mp1: reorder some CONFIG in stm32mp1.h
` [U-Boot] [PATCH 2/3] stm32mp1: add configuration op-tee
` [U-Boot] [PATCH 3/3] stm32mp1: activate OF_BOARD_SETUP and FDT_FIXUP_PARTITIONS
[U-Boot] [PATCH v2 0/7] sunxi: Add H6 DDR3 DRAM support
2019-07-02 10:25 UTC (9+ messages)
` [U-Boot] [PATCH v2 1/7] sunxi: H6: DRAM: avoid memcpy() on MMIO registers
` [U-Boot] [PATCH v2 2/7] sunxi: H6: DRAM: follow recommended PHY init algorithm
` [U-Boot] [PATCH v2 3/7] sunxi: H6: move LPDDR3 timing definition into separate file
` [U-Boot] [linux-sunxi] "
` [U-Boot] [PATCH v2 4/7] sunxi: H6: Add DDR3 support to DRAM controller driver
` [U-Boot] [PATCH v2 5/7] sunxi: H6: Add DDR3-1333 timings
` [U-Boot] [PATCH v2 6/7] sunxi: H6: Add DDR3 DRAM delay values
` [U-Boot] [PATCH v2 7/7] sunxi: H6: Add basic Eachlink H6 Mini support
[U-Boot] Pull request: u-boot-rockchip/tags/rockchip-for-v2019.07-rc5-2
2019-07-02 9:25 UTC
[U-Boot] [PATCH] video: backlight: fix pwm invertation
2019-07-02 9:08 UTC (7+ messages)
[U-Boot] [PATCH v2 00/11] Improvements on the MMC switch
2019-07-02 8:53 UTC (12+ messages)
` [U-Boot] [PATCH v2 01/11] mmc: omap_hsmmc: reset FSM for DAT and CMD lines if needed before a new command
` [U-Boot] [PATCH v2 02/11] mmc: omap_hsmmc: don't fill the send_init_stream callback
` [U-Boot] [PATCH v2 03/11] Revert "mmc: Add a new callback function to perform the 74 clocks cycle sequence"
` [U-Boot] [PATCH v2 04/11] mmc: omap_hsmmc: provide wait_dat0 even if UHS modes are not supported
` [U-Boot] [PATCH v2 05/11] mmc: add mmc_poll_for_busy() and change the purpose of mmc_send_status()
` [U-Boot] [PATCH v2 06/11] mmc: if possible, poll the busy state using DAT0
` [U-Boot] [PATCH v2 07/11] mmc: use the generic timeout for cmd6 (SWITCH) provided in the ext_csd
` [U-Boot] [PATCH v2 08/11] mmc: When switching partition, use the timeout specified "
` [U-Boot] [PATCH v2 09/11] mmc: During a switch, poll on dat0 if available and check the final status
` [U-Boot] [PATCH v2 10/11] mmc: do not change mode when accessing a boot partition
` [U-Boot] [PATCH v2 11/11] mmc: retry a few times if a partition switch failed
[U-Boot] [PATCH v1] test/py: add MMC/SD block write test
2019-07-02 8:34 UTC (5+ messages)
[U-Boot] [PATCH 01/18] arm64: dts: uniphier: add reserved-memory for secure memory
2019-07-02 8:32 UTC (18+ messages)
` [U-Boot] [PATCH 02/18] ARM: uniphier: remove unused uniphier_ld11_boot_device_fixup()
` [U-Boot] [PATCH 03/18] ARM: uniphier: clean up clk/Makefile
` [U-Boot] [PATCH 04/18] ARM: uniphier: remove argument from boot_device_is_usb() hook
` [U-Boot] [PATCH 05/18] ARM: uniphier: use bool type for have_internal_stm parameter
` [U-Boot] [PATCH 06/18] ARM: uniphier: include <linux/io.h> from boot-device.c
` [U-Boot] [PATCH 07/18] clk: uniphier: add EMMC clock for LD11, LD20, and PXs3
` [U-Boot] [PATCH 08/18] ARM: uniphier: check DT to determine whether to use support card
` [U-Boot] [PATCH 09/18] ARM: uniphier: check DT to determine whether to initialize SBC
` [U-Boot] [PATCH 10/18] ARM: uniphier: make boot_is_swapped() code optional
` [U-Boot] [PATCH 11/18] ARM: uniphier: detect SD boot mode
` [U-Boot] [PATCH 12/18] ARM: uniphier: de-couple SG macros into base address and offset
` [U-Boot] [PATCH 13/18] ARM: uniphier: de-couple SC "
` [U-Boot] [PATCH 14/18] ARM: uniphier: detect register base addresses run-time
` [U-Boot] [PATCH 15/18] ARM: uniphier: make dram_init() independent of SG_MEMCONF
` [U-Boot] [PATCH 16/18] ARM: uniphier: make dram_init() more generic
` [U-Boot] [PATCH 17/18] ARM: uniphier: make mem_map run-time configurable
` [U-Boot] [PATCH 18/18] ARM: uniphier: remove CONFIG_SYS_SDRAM_BASE
[U-Boot] [PATCH v2] armv8: ls1028a: select BOARD_LATE_INIT config
2019-07-02 8:16 UTC
[U-Boot] [PATCH v2 1/5] armv8: ls2088a: The ls2088a platform supports the I2C driver model
2019-07-02 6:41 UTC (5+ messages)
` [U-Boot] [PATCH v2 2/5] gpio: do not include <asm/arch/gpio.h> on ARCH_LS2080A
` [U-Boot] [PATCH v2 3/5] configs: ls2088a: enable DM support for rtc
` [U-Boot] [PATCH v2 4/5] armv8: dts: fsl-ls2088a: add i2c node support
` [U-Boot] [PATCH v2 5/5] armv8: dts: ls2088ardb: Add slave nodes under the i2c0 controller
[U-Boot] [PATCH v2 1/5] armv8: ls1088a: The ls1088a platform supports the I2C driver model
2019-07-02 6:35 UTC (5+ messages)
` [U-Boot] [PATCH v2 2/5] gpio: do not include <asm/arch/gpio.h> on ARCH_LS1088A
` [U-Boot] [PATCH v2 3/5] configs: ls1088a: enable DM support for pcf2127 rtc
` [U-Boot] [PATCH v2 4/5] armv8: dts: fsl-ls1088a: add I2C node support
` [U-Boot] [PATCH v2 5/5] armv8: dts: ls1088ardb: Add slave nodes under the i2c0 controller
[U-Boot] [PATCH v3 1/4] armv8: ls1028a: The ls1028a platform supports the I2C driver model
2019-07-02 6:28 UTC (4+ messages)
` [U-Boot] [PATCH v3 2/4] gpio: do not include <asm/arch/gpio.h> on ARCH_LS1028A
` [U-Boot] [PATCH v3 3/4] configs: ls1028a: enable DM support for pcf2127 rtc
` [U-Boot] [PATCH v3 4/4] armv8: dts: ls1028ardb: Add slave nodes under the i2c0 controller
[U-Boot] Upstreaming usb host drivers for iMX8/iMX8M
2019-07-02 6:21 UTC (7+ messages)
` [U-Boot] 答复: [EXT] "
[U-Boot] [PATCH v2 0/8] x86: Add basic Slim Bootloader payload support
2019-07-02 6:03 UTC (3+ messages)
[U-Boot] [PATCH v5 0/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
2019-07-02 5:08 UTC (2+ messages)
[U-Boot] [PATCH v2 1/2] configs: lx2160aqds: enable DM support for pcf2127 rtc
2019-07-02 3:53 UTC (2+ messages)
` [U-Boot] [PATCH v2 2/2] armv8: lx2160aqds : Add pcf2127 node
[U-Boot] [PATCH v5 0/8] rockchip: enable TPL for tinker-rk3288
2019-07-02 3:43 UTC (9+ messages)
` [U-Boot] [PATCH v5 1/8] rockchip: rk3288: enable TPL configs to chip level
` [U-Boot] [PATCH v5 2/8] rockchip: rk3288: add separate TPL STACK address
` [U-Boot] [PATCH v5 3/8] rockchip: dts: rk3288: move reloc tag into -u-boot dts
` [U-Boot] [PATCH v5 4/8] rockchip: dts: tinker: migrate the dm-pre-reloc "
` [U-Boot] [PATCH v5 5/8] rockchip: dts: rk3288-tinker: enable sdmmc pinctrl node in spl
` [U-Boot] [PATCH v5 6/8] rockchip: config: update config for TPL support on tinker-rk3288
` [U-Boot] [PATCH v5 7/8] rockchip: config: tiner-rk3288: extend CONFIG_SYS_MONITOR_LEN to 600KB
` [U-Boot] [PATCH v5 8/8] rockchip: rk3288: enable TPL for tinker-board
[U-Boot] [PATCH 1/2] configs: lx2160aqds: enable DM support for pcf2127 rtc
2019-07-02 3:41 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] armv8: lx2160aqds : Add pcf2127 node
[U-Boot] [PATCH v3 1/7] armv8: lx2160a: The lx2160a platform supports the I2C driver model
2019-07-02 3:35 UTC (7+ messages)
` [U-Boot] [PATCH v3 2/7] configs: lx2160ardb: enable DM support for pcf2127 rtc
` [U-Boot] [PATCH v3 3/7] drivers: i2c: mxc: Solve the compiler error when using i2c dm mode
` [U-Boot] [PATCH v3 4/7] gpio: do not include <asm/arch/gpio.h> on ARCH_LX2160A
` [U-Boot] [PATCH v3 5/7] armv8: dts: fsl-lx2160a: add i2c controller and gpio DT nodes
` [U-Boot] [PATCH v3 6/7] armv8: lx2160ardb: Add pcf2127 node
` [U-Boot] [PATCH v3 7/7] armv8: lx2160ardb : Add the "u-boot, dm-pre-reloc" property for i2c0 node
[U-Boot] [PATCH] rockchip: dts: rk3399: rockpro64: Provide init voltage
2019-07-02 2:48 UTC (4+ messages)
` [U-Boot] [PATCH] rockchip: dts: rk3399: rockpro64: Provide init voltage【请注意，邮件由u-boot-bounces@lists.denx.de代发】 "
[U-Boot] [PATCH] rockchip: rk3399: Fix enabling boot-on regulators
2019-07-02 2:33 UTC (3+ messages)
` [U-Boot] [PATCH] rockchip: rk3399: Fix enabling boot-on regulators【请注意，邮件由u-boot-bounces@lists.denx.de代发】 regulators
[U-Boot] [PATCH] spl: atf: Fix uninitialized pointer to bl31_image_info
2019-07-02 2:33 UTC (3+ messages)
` [U-Boot] [PATCH] spl: atf: Fix uninitialized pointer to bl31_image_info【请注意，邮件由u-boot-bounces@lists.denx.de代发】 bl31_image_info
[U-Boot] [PATCH 00/52] Support i.MX8MM/N
2019-07-02 2:32 UTC (8+ messages)
` [U-Boot] [PATCH 46/52] tools: imx8mimage: add ROM VERSION
` [U-Boot] [PATCH 47/52] pinctrl: imx8m: support i.MX8MN
` [U-Boot] [PATCH 48/52] tools: imx8m_image: support ddr4 firmware
` [U-Boot] [PATCH 49/52] clk: imx: add i.MX8MN clk support
` [U-Boot] [PATCH 50/52] imx8m: add i.MX8MN ddr4 image cfg file
` [U-Boot] [PATCH 51/52] imx: add dtsi for i.MX8MN
` [U-Boot] [PATCH 52/52] imx: add i.MX8MN DDR4 board support
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox