messages from 2019-07-29 21:22:26 to 2019-07-30 18:07:54 UTC [more...]
[U-Boot] Please pull u-boot-video
2019-07-30 18:07 UTC
[U-Boot] [PATCH] sifive: riscv: streamline HiFive Unleashed configuration infrastructure
2019-07-30 17:31 UTC (6+ messages)
` [U-Boot] [PATCH] sifive: riscv: update Hifive "
[U-Boot] [PATCH 00/48] stm32mp1 patches for v2019.10
2019-07-30 17:16 UTC (49+ messages)
` [U-Boot] [PATCH 01/48] stm32mp1: cosmetic: remove comment
` [U-Boot] [PATCH 02/48] pinctrl: pinctrl_stm32: cosmetic: Reorder include files
` [U-Boot] [PATCH 03/48] pinctrl: stmfx: update pinconf settings
` [U-Boot] [PATCH 04/48] ARM: dts: stm32mp1: sync device tree with v5.3-rc2
` [U-Boot] [PATCH 05/48] ARM: dts: stm32mp1: DDR config v1.45
` [U-Boot] [PATCH 06/48] ARM: dts: stm32mp1: Add iwdg2 support for SPL
` [U-Boot] [PATCH 07/48] ARM: dts: stm32mp1: Add PSCI node access before relocation
` [U-Boot] [PATCH 08/48] ARM: dts: stm32mp1: add ldtc pre-reloc proper in SOC file
` [U-Boot] [PATCH 09/48] ARM: dts: stm32mp1: add key support on DK1/DK2
` [U-Boot] [PATCH 10/48] ARM: dts: stm32mp1: add pull-up on serial rx of console connected to STLINK
` [U-Boot] [PATCH 11/48] dt-bindings: clock: stm32mp1: support disabled fixed clock
` [U-Boot] [PATCH 12/48] stpmic1: program pmic to keep only the debug unit on
` [U-Boot] [PATCH 13/48] stm32mp1: configs: remove CONFIG_SYS_HZ
` [U-Boot] [PATCH 14/48] stm32mp1: configs: activate CONFIG_SILENT_CONSOLE
` [U-Boot] [PATCH 15/48] stm32mp1: configs: activate PRE_CONSOLE_BUFFER
` [U-Boot] [PATCH 16/48] stm32mp1: configs: deactivate ARMV7_VIRT for basic boot
` [U-Boot] [PATCH 17/48] stm32mp1: configs: select CONFIG_STM32_SERIAL
` [U-Boot] [PATCH 18/48] stm32mp1: configs: Activate DISABLE_CONSOLE
` [U-Boot] [PATCH 19/48] stm32mp1: configs: support MTDPARTS only if needed
` [U-Boot] [PATCH 20/48] stm32mp1: configs: imply CONFIG_OF_LIBFDT_OVERLAY
` [U-Boot] [PATCH 21/48] stm32mp1: configs: Deactivate SPI_FLASH_BAR
` [U-Boot] [PATCH 22/48] stm32mp1: configs: add CONFIG_DM_VIDEO
` [U-Boot] [PATCH 23/48] stm32mp1: configs: add BACKLIGHT_GPIO support
` [U-Boot] [PATCH 24/48] stm32mp1: configs: add CONFIG_CMD_BMP
` [U-Boot] [PATCH 25/48] stm32mp1: configs: add condition to activate WATCHDOG in SPL
` [U-Boot] [PATCH 26/48] stm32mp1: configs: add altbootcmd
` [U-Boot] [PATCH 27/48] stm32mp1: configs: Set bootdelay to 1
` [U-Boot] [PATCH 28/48] stm32mp1: configs: add spi load support in spl
` [U-Boot] [PATCH 29/48] stm32mp1: board: add environment variable for board id and board rev
` [U-Boot] [PATCH 30/48] stm32mp1: board: enable v1v2_hdmi and v3v3_hdmi regulator on dk2 boot
` [U-Boot] [PATCH 31/48] stm32mp1: board: support of error led on ed1/ev1 board
` [U-Boot] [PATCH 32/48] stm32mp1: board: protect the led function calls
` [U-Boot] [PATCH 33/48] stm32mp1: board: check the boot-source to disable bootdelay
` [U-Boot] [PATCH 34/48] stm32mp1: board: Update the way vdd-supply is retrieved from DT
` [U-Boot] [PATCH 35/48] stm32mp1: board: remove board_check_usb_power when ADC is not activated
` [U-Boot] [PATCH 36/48] stm32mp1: board: cosmetic: cleanup file
` [U-Boot] [PATCH 37/48] mmc: stm32_sdmmc2: reload watchdog
` [U-Boot] [PATCH 38/48] serial: stm32: add Framing error support
` [U-Boot] [PATCH 39/48] serial: stm32: remove unused include
` [U-Boot] [PATCH 40/48] stm32mp1: ram: cosmetic: remove unused prototype
` [U-Boot] [PATCH 41/48] stm32mp1: ram: fix address issue in 2 tests
` [U-Boot] [PATCH 42/48] stm32mp1: ram: update loop management in infinite test
` [U-Boot] [PATCH 43/48] stm32mp1: ram: reload watchdog during ddr test
` [U-Boot] [PATCH 44/48] stm32mp1: ram: add pattern parameter in infinite write test
` [U-Boot] [PATCH 45/48] stm32mp1: Makefile cleanup
` [U-Boot] [PATCH 46/48] stm32mp1: clk: remove debug traces
` [U-Boot] [PATCH 47/48] stm32mp1: clk: use gd to store frequency information
` [U-Boot] [PATCH 48/48] MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD
[U-Boot] [PATCH 0/2] Disable K3_SYSTEM_CONTROLLER on K3 Arm64 cores
2019-07-30 16:18 UTC (5+ messages)
` [U-Boot] [PATCH 1/2] configs: am65x_evm_a53: Disable K3_SYSTEM_CONTROLLER
[U-Boot] U-Boot/EBBR plugfest at ELC-EU?
2019-07-30 15:33 UTC (9+ messages)
` [U-Boot] (Offlist) "
[U-Boot] [GIT PULL] Xilinx/FPGA patches for v2019.10
2019-07-30 15:23 UTC
[U-Boot] [PATCH v2 0/5] fpga: collected patches
2019-07-30 15:17 UTC (2+ messages)
[U-Boot] [PATCH v3 0/3] arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards
2019-07-30 14:55 UTC (6+ messages)
` [U-Boot] [PATCH v3 1/3] arm64: dts: rockchip: Add support for Khadas Edge
` [U-Boot] [PATCH v3 2/3] arm64: dts: rockchip: Add support for Khadas Edge-V
` [U-Boot] [PATCH v3 3/3] arm64: dts: rockchip: Add support for Khadas Edge-Captain
[U-Boot] nxp: HABv4 secure boot on iMX7 NAND broken
2019-07-30 14:33 UTC (7+ messages)
[U-Boot] [PATCH 1/5] armv8: fsl-layerscape: add missing sec jr base address defines
2019-07-30 14:29 UTC (5+ messages)
` [U-Boot] [PATCH 2/5] armv8: fsl-layerscape: add base addresses for several devices
` [U-Boot] [PATCH 3/5] armv8: fsl-layerscape: make icid setup endianness aware
` [U-Boot] [PATCH 4/5] armv8: ls1088a: add icid setup for platform devices
` [U-Boot] [PATCH 5/5] armv8: ls1028a: "
[U-Boot] [PATCH] usb: ehci-omap: Add Support DM_USB and OF_CONTROL
2019-07-30 14:01 UTC (10+ messages)
[U-Boot] [PATCH] ARM: da850-evm: Remove references to CONFIG_DA850_AM18X_EVM
2019-07-30 13:58 UTC
[U-Boot] [PATCH] net: mvpp2: support setting hardware addresses from ethernet core
2019-07-30 13:40 UTC (3+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH] ARM: dts: da850-evm: Fix MDIO pinmux
2019-07-30 13:32 UTC
[U-Boot] [PATCH v1 0/5] imx6, display: enhancements for upcoming aristainetos DM support
2019-07-30 12:53 UTC (2+ messages)
[U-Boot] [PULL] u-boot-sh/master
2019-07-30 12:07 UTC
[U-Boot] [PATCH] video, simple_panel: add lg,lb070wv8 display
2019-07-30 9:17 UTC (2+ messages)
[U-Boot] [PATCH] bmp_logo: support CONFIG_DM_VIDEO
2019-07-30 9:15 UTC (2+ messages)
[U-Boot] [PATCH PATCH v3 00/12] Add support for applications of overlays in SPL
2019-07-30 8:08 UTC (3+ messages)
[U-Boot] [PATCH 1/2] configs: am335x_boneblack_vboot_defconfig: Fix regression by enabling BLK and DM support, disable in SPL
2019-07-30 7:55 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] configs: am335x_boneblack_vboot_defconfig: Add DM for SPI and Flash devices
[U-Boot] [PATCH 01/16] clk: introduce clk_dev_binded
2019-07-30 7:54 UTC (6+ messages)
[U-Boot] [PATCH V2 01/16] clk: introduce clk_dev_binded
2019-07-30 7:53 UTC (16+ messages)
` [U-Boot] [PATCH V2 02/16] clk: use clk_dev_binded
` [U-Boot] [PATCH V2 03/16] clk: mux: add set parent support
` [U-Boot] [PATCH V2 04/16] clk: export mux/divider ops
` [U-Boot] [PATCH V2 05/16] clk: add clk-gate support
` [U-Boot] [PATCH V2 06/16] clk: divider set rate supporrt
` [U-Boot] [PATCH V2 07/16] clk: fixed_rate: export clk_fixed_rate
` [U-Boot] [PATCH V2 08/16] clk: imx: import clk heplers
` [U-Boot] [PATCH V2 09/16] clk: imx: gate2 add set rate
` [U-Boot] [PATCH V2 10/16] dm: clk: ignore default settings when node not valid
` [U-Boot] [PATCH V2 11/16] clk: add composite clk support
` [U-Boot] [PATCH V2 12/16] clk-provider: include clk-uclass.h
` [U-Boot] [PATCH V2 13/16] clk: gate: support sandbox
` [U-Boot] [PATCH V2 14/16] clk: sandbox: add composite clk
` [U-Boot] [PATCH V2 15/16] test: dm: clk_ccf: test "
` [U-Boot] [PATCH V2 16/16] configs: sandbox: Enable "
[U-Boot] [PATCH] i2c: imx_lpi2c: add ipg clk
2019-07-30 7:17 UTC (4+ messages)
[U-Boot] [PATCH v2 00/11] dm: Convert TPC70 to use DM and DTS in SPL and u-boot proper
2019-07-30 7:12 UTC (12+ messages)
` [U-Boot] [PATCH v2 01/11] imx: tpc70: config: Add script commands to update u-boot and OE's wic
` [U-Boot] [PATCH v2 02/11] imx: tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update
` [U-Boot] [PATCH v2 03/11] imx: tpc70: Add board_boot_order() to distinguish between eMMC and SD boot
` [U-Boot] [PATCH v2 04/11] imx: tpc70: DTS: Explicitly add imx6q-kp.dtb to Makefile for DTB compilation
` [U-Boot] [PATCH v2 05/11] imx: tpc70: cosmetic: Replace magic numbers when setting ENET clock
` [U-Boot] [PATCH v2 06/11] imx: tpc70: led: Enable LED default state
` [U-Boot] [PATCH v2 07/11] imx: tpc70: dts: Add TPC70 board (imx6q based) device tree description
` [U-Boot] [PATCH v2 08/11] imx: dts: Add u-boot specific set of device tree properties for tpc70
` [U-Boot] [PATCH v2 09/11] imx: tpc70: Convert TPC70 (imx6q) board to use DM/DTS in SPL and u-boot
` [U-Boot] [PATCH v2 10/11] imx: spl: tpc70: Do not remove clock related properties from DTS
` [U-Boot] [PATCH v2 11/11] imx: config: Update KP's TPC70 config to support SWUpdate
[U-Boot] [PATCH] sunxi: dts: a64-olinuxino: Fix regression to eMMC support
2019-07-30 4:13 UTC
[U-Boot] [PATCH] arm: dts: k3-am654-base-board: Fix cpsw_nuss power-domains property
2019-07-30 4:07 UTC (2+ messages)
[U-Boot] [PATCH v2 00/11] SPL support for RISC-V
2019-07-30 3:45 UTC (5+ messages)
` [U-Boot] [PATCH v2 05/11] spl: support booting via RISC-V OpenSBI
[U-Boot] [PATCH] spl_mmc: always use find_mmc_device() to get mmc handler
2019-07-30 3:08 UTC (4+ messages)
[U-Boot] [PATCH] pinctrl: renesas: r8a7796: Fix PRESET# bias setting
2019-07-30 2:38 UTC
[U-Boot] [ANN] U-Boot v2019.10-rc1 released
2019-07-30 1:25 UTC
[U-Boot] [PATCH] doc: arch: sandbox: Replace all the instances of README.sandbox
2019-07-30 1:25 UTC (2+ messages)
[U-Boot] [PATCH] Drop linker-generated array creation when CONFIG_CMDLINE is disabled
2019-07-30 1:24 UTC (2+ messages)
[U-Boot] [PATCH] doc: board: Add missing board index.rst files
2019-07-30 1:24 UTC (2+ messages)
[U-Boot] [PATCH 1/1] tools/logos: remove black background of U-Boot logo
2019-07-30 1:24 UTC (2+ messages)
[U-Boot] [PATCH v6 0/3] fit: Image node compression
2019-07-30 1:24 UTC (7+ messages)
` [U-Boot] [PATCH v6 1/3] common: Move bootm_decomp_image() to image.c (as image_decomp())
` [U-Boot] [PATCH v6 2/3] fit: Support compression for non-kernel components (e.g. FDT)
` [U-Boot] [PATCH v6 3/3] fit: Support compat string property in configuration node
[U-Boot] [PATCH] Dockerfile: Build a copy of QEMU and install it under /opt
2019-07-30 1:24 UTC (3+ messages)
` [U-Boot] [PATCH] gitlab-ci: Switch to a Docker image that contains a QEMU we build
[U-Boot] [PATCH v4 1/2] pinctrl: mediatek: fix warning
2019-07-30 1:24 UTC (4+ messages)
` [U-Boot] [PATCH v4 2/2] board: mediatek: Add pumpkin board support
[U-Boot] [PATCH v1] gpio: fixes for gpio-hog support
2019-07-30 1:24 UTC (2+ messages)
[U-Boot] [PATCH v1 0/3] rtc, dm: add DM/Kconfig support for RTC_RX8025 driver
2019-07-30 1:23 UTC (7+ messages)
` [U-Boot] [PATCH v1 1/3] rtc: move RTC_RX8025 to Kconfig
` [U-Boot] [PATCH v1 2/3] rtc, rx8025: fix Coding Style
` [U-Boot] [PATCH v1 3/3] rtc, rx8025: add DM support
[U-Boot] [PATCH 1/1] lib: uuid: alignment error in gen_rand_uuid()
2019-07-30 1:23 UTC (2+ messages)
[U-Boot] [PATCH] Add validation for icache/dcache arguments - arguments different from off/on/flush are currently silently ignored
2019-07-30 1:23 UTC (2+ messages)
[U-Boot] [RESEND PATCH v2 00/13] ARM: davinci: driver-model improvements
2019-07-30 1:23 UTC (27+ messages)
` [U-Boot] [RESEND PATCH v2 01/13] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs
` [U-Boot] [RESEND PATCH v2 02/13] sandbox: "
` [U-Boot] [RESEND PATCH v2 03/13] i2c: remove i2c driver-model compatibility layer
` [U-Boot] [RESEND PATCH v2 04/13] omapl138_lcdk_defconfig: don't build support for SPI
` [U-Boot] [RESEND PATCH v2 05/13] nand: davinci: make davinci_nand_init() static
` [U-Boot] [RESEND PATCH v2 06/13] nand: davinci: add support for driver model
` [U-Boot] [RESEND PATCH v2 07/13] davinci: omapl138-lcdk: enable driver model for NAND
` [U-Boot] [RESEND PATCH v2 08/13] davinci: da850-evm: "
` [U-Boot] [RESEND PATCH v2 09/13] davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE
` [U-Boot] [RESEND PATCH v2 10/13] davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF
` [U-Boot] [RESEND PATCH v2 11/13] davinci: omapl138-lcdk: remove unneeded includes
` [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL
` [U-Boot] [RESEND PATCH v2 13/13] configs: omapl138_lcdk: enable NAND self-init "
[U-Boot] [PATCH v2] arm: mach-keystone: Use appended original image size in image processing
2019-07-30 1:21 UTC (2+ messages)
[U-Boot] Please pull u-boot-dm
2019-07-30 1:21 UTC (2+ messages)
[U-Boot] [PATCH] ARM: da850_am18xxevm: Remove config and references
2019-07-30 1:21 UTC (2+ messages)
[U-Boot] [PULL] u-boot-socfpga/master
2019-07-30 1:21 UTC (2+ messages)
[U-Boot] Please pull u-boot-video
2019-07-30 1:21 UTC (2+ messages)
[U-Boot] Pull request: u-boot-rockchip u-boot-rockchip-20190729
2019-07-30 1:21 UTC (2+ messages)
[U-Boot] [PATCH v2] dw_mmc: turn on the IO supply
2019-07-30 0:47 UTC (5+ messages)
` [U-Boot] [PATCH v3] "
[U-Boot] [PATCH v3 0/6] Extend mv88e61xx driver to support 88E6071
2019-07-29 23:35 UTC (11+ messages)
` [U-Boot] [PATCH v3 1/6] net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
` [U-Boot] [PATCH v3 2/6] net: phy: mv88e61xx: add CPU port parameter init for 88E6071
` [U-Boot] [PATCH v3 3/6] net: phy: mv88E61xx: fix ENERGY_DET init for mv88E6071
` [U-Boot] [PATCH v3 5/6] net: phy: mv88e61xx: register phy_driver struct for 88E6071
` [U-Boot] [PATCH v3 6/6] net: phy: fix switch vendor name
[U-Boot] [PATCH v2 0/6] Extend mv88e61xx driver to support 88E6071
2019-07-29 23:18 UTC (5+ messages)
` [U-Boot] [PATCH v2 4/6] net: phy: mv88E61xx: add config option for mv88E6071 support
[U-Boot] [PATCH 1/1] Dockerfile: build GRUB UEFI targets
2019-07-29 23:05 UTC (4+ messages)
[U-Boot] [PATCH] Makefile: fix implementation of BINMAN_DEBUG
2019-07-29 21:22 UTC (3+ messages)
[U-Boot] [PATCH 00/53] binman: Support replacing entries in an existing image
2019-07-29 21:22 UTC (47+ messages)
` [U-Boot] [PATCH 01/53] dtoc: Return a non-zero exit code when tests fail
` [U-Boot] [PATCH 02/53] binman: Move image-processing code into a function
` [U-Boot] [PATCH 03/53] binman: Move GetFdtSet() into blob_dtb
` [U-Boot] [PATCH 04/53] binman: Use print() to print output
` [U-Boot] [PATCH 05/53] binman: Move image/fdt code into PrepareImagesAndDtbs()
` [U-Boot] [PATCH 06/53] binman: Convert GetFdtSet() to use a dict
` [U-Boot] [PATCH 07/53] binman: Rename state.GetFdts()
` [U-Boot] [PATCH 08/53] binman: Rename state.GetFdt()
` [U-Boot] [PATCH 09/53] binman: Adjust GetFdt() to be keyed by etype
` [U-Boot] [PATCH 10/53] binman: Adjust state.fdt_files to be keyed by entry type
` [U-Boot] [PATCH 11/53] binman: Simplify state.fdt_subset
` [U-Boot] [PATCH 12/53] binman: Drop state.fdt_set as this is not needed
` [U-Boot] [PATCH 13/53] patman: Update tout to avoid open-coding the debug levels
` [U-Boot] [PATCH 14/53] binman: Add a bit of logging in entries when packing
` [U-Boot] [PATCH 15/53] binman: Show a helpful error when a DT property is missing
` [U-Boot] [PATCH 16/53] dtoc: Update Fdt.FromData() to allow a name
` [U-Boot] [PATCH 17/53] dtoc: Update Fdt.GetNode() to handle the root node
` [U-Boot] [PATCH 18/53] binman: Store image fdtmap when loading from a file
` [U-Boot] [PATCH 19/53] binman: Support loading entry data "
` [U-Boot] [PATCH 20/53] binman: Allow state functions to fail to return data
` [U-Boot] [PATCH 21/53] binman: Store the entry in output_fdt_files
` [U-Boot] [PATCH 22/53] binman: Add an image name into the fdtmap
` [U-Boot] [PATCH 23/53] binman: Adjust Entry to read the node in a separate call
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox