messages from 2019-07-30 17:16:51 to 2019-08-01 03:36:32 UTC [more...]
[U-Boot] [PATCH 0/2] Disable K3_SYSTEM_CONTROLLER on K3 Arm64 cores
2019-08-01 3:36 UTC (9+ messages)
` [U-Boot] [PATCH 1/2] configs: am65x_evm_a53: Disable K3_SYSTEM_CONTROLLER
` [U-Boot] [PATCH 2/2] configs: j721e_evm_a72: "
[U-Boot] [PATCH] arm: dts: k3-am654-base-board: Fix cpsw_nuss power-domains property
2019-08-01 3:36 UTC (2+ messages)
[U-Boot] [PATCH] ARM: da850-evm: Replace CMD_SF with CMD_MTD
2019-08-01 3:36 UTC (2+ messages)
[U-Boot] [PATCH] ARM: da850evm: Split MTDPARTS into SPL and u-boot
2019-08-01 3:36 UTC (2+ messages)
[U-Boot] [PATCH v2 1/2] configs: am57xx_evm_defconfig: Enable 'bcb' command
2019-08-01 3:36 UTC (4+ messages)
` [U-Boot] [PATCH v2 2/2] configs: am57xx_evm_defconfig: Enable 'dtimg' command
[U-Boot] [PATCH v2] omap: Correct the fastboot product var
2019-08-01 3:35 UTC (2+ messages)
[U-Boot] [PATCH v3] env: ti: boot: Handle reboot reason from BCB
2019-08-01 3:35 UTC (2+ messages)
[U-Boot] Please pull u-boot-mmc
2019-08-01 3:35 UTC (2+ messages)
[U-Boot] [PATCH v2 00/11] SPL support for RISC-V
2019-08-01 3:32 UTC (2+ messages)
[U-Boot] [PATCH] riscv: serial: fix to load binary file over y-modem
2019-08-01 3:08 UTC (8+ messages)
` [U-Boot] [PATCH] riscv : serial: use rx watermark to indicate rx data is present
[U-Boot] [PATCH 0/4] Make some changes to SDP
2019-08-01 2:56 UTC (3+ messages)
` [U-Boot] 答复: "
[U-Boot] [PATCH 0/7] Add TPL support for Pine64 Rock64 board
2019-08-01 2:42 UTC (14+ messages)
` [U-Boot] [PATCH 1/7] rockchip: ram: add full feature rk3328 DRAM driver
` [U-Boot] [PATCH 2/7] rockchip: dts: rk3328: update dmc node for driver
` [U-Boot] [PATCH 3/7] rockchip: dts: rk3328: enable the drivers need by TPL/SPL
` [U-Boot] [PATCH 4/7] rockchip: Kconfig: enable TPL support for rk3328
` [U-Boot] [PATCH 5/7] rockchip: evb-rk3328: enable defconfig options for TPL/SPL
` [U-Boot] [PATCH 6/7] configs: rk3328: enable TPL for rock64-rk3328_defconfig
` [U-Boot] [PATCH 7/7] doc: rockchip: Adapt Pine64 Rock64 board instructions
[U-Boot] [PATCH 1/2] riscv: Sync csr.h with Linux kernel v5.2
2019-08-01 2:42 UTC (5+ messages)
` [U-Boot] [PATCH 2/2] riscv: Access CSRs using CSR numbers
[U-Boot] [BISECTED] [BUG]: MMC initialization hang at Zynq Z-turn board
2019-08-01 2:21 UTC (2+ messages)
[U-Boot] [PATCH 00/39] env: common: Remove environment definitions from common.h
2019-08-01 0:55 UTC (75+ messages)
` [U-Boot] [PATCH 05/39] env: Create a new file for environment functions
` [U-Boot] [PATCH 06/39] env: Move get_env_id() to env.h
` [U-Boot] [PATCH 07/39] env: Move env_get_f() "
` [U-Boot] [PATCH 08/39] env: Move env_init() "
` [U-Boot] [PATCH 09/39] env: Move env_relocate() "
` [U-Boot] [PATCH 10/39] env: Move envmatch() "
` [U-Boot] [PATCH 11/39] env: Move env_set_hex() "
` [U-Boot] [PATCH 12/39] env: Move env_set_ulong() "
` [U-Boot] [PATCH 13/39] env: Move env_get_ulong() "
` [U-Boot] [PATCH 14/39] env: Move env_get_yesno() "
` [U-Boot] [PATCH 15/39] env: Move env_get_hex() "
` [U-Boot] [PATCH 16/39] env: Move env_set() "
` [U-Boot] [PATCH 17/39] env: Move env_get() "
` [U-Boot] [PATCH 18/39] env: Move eth_env_get/set_enetaddr() "
` [U-Boot] [PATCH 19/39] env: Move uncommon functions "
` [U-Boot] [PATCH 20/39] env: Move set_default_vars "
` [U-Boot] [PATCH 21/39] env: Move env_load/save functions "
` [U-Boot] [PATCH 22/39] env: Move env import/export "
` [U-Boot] [PATCH 23/39] env: Drop env_crc_update()
` [U-Boot] [PATCH 24/39] env: Move get/set_default_env() to env.h
` [U-Boot] [PATCH 25/39] env: Move env_get_char() "
` [U-Boot] [PATCH 26/39] env: Move env_reloc() "
` [U-Boot] [PATCH 27/39] env: Rename environment to embedded_environment
` [U-Boot] [PATCH 28/39] env: Move env_valid to env.h
` [U-Boot] [PATCH 29/39] env: Move callback definitions "
` [U-Boot] [PATCH 30/39] env: Drop the ENTRY typdef
` [U-Boot] [PATCH 31/39] env: Drop _ENTRY
` [U-Boot] [PATCH 32/39] env: Rename the redundancy flags
` [U-Boot] [PATCH 33/39] env: Drop the ACTION typedef
` [U-Boot] [PATCH 34/39] env: Drop the double underscores in search.h
` [U-Boot] [PATCH 35/39] env: Move TOTAL_MALLOC_LEN to environment.h
` [U-Boot] [PATCH 36/39] env: Drop environment.h header file where not needed
` [U-Boot] [PATCH 37/39] env: Rename environment.h to env_internal.h
[U-Boot] [RFC/RESEND 00/22] Add support for Cavium Octeon-TX CN80XX/CN81XX
2019-08-01 0:32 UTC (9+ messages)
` [U-Boot] [RFC/RESEND 01/22] arm: introduce ARCH_THUNDERX
[U-Boot] Hi, I am new to U-Boot, how do I get started?
2019-07-31 22:27 UTC (3+ messages)
[U-Boot] [PATCH v1 0/9] apalis-tk1: fixes/updates for v2019.10
2019-07-31 22:13 UTC (18+ messages)
` [U-Boot] [PATCH v1 1/9] apalis-tk1: do not explicitly release reset_moci#
` [U-Boot] [PATCH v1 2/9] apalis-tk1: set apalis gpio 8 aka fan_en
` [U-Boot] [PATCH v1 3/9] apalis-tk1: provide proper USB vendor id
` [U-Boot] [PATCH v1 4/9] apalis-tk1: enable user debug by default
` [U-Boot] [PATCH v1 5/9] apalis-tk1: add pcie_aspm=off to defargs
` [U-Boot] [PATCH v1 6/9] apalis-tk1: switch to zImage
` [U-Boot] [PATCH v1 7/9] apalis-tk1/t30: colibri_t30: display reset reason
` [U-Boot] [PATCH v1 8/9] apalis-tk1: remove default vesa vga mode from vidargs
` [U-Boot] [PATCH v1 9/9] apalis-tk1: remove non-esential power rails on boot
[U-Boot] [PATCH v3] dm: core: device: switch off power domain after device removal
2019-07-31 21:31 UTC
[U-Boot] ARM: imx6: Add support for SD/MMC Manufacture Mode
2019-07-31 20:59 UTC
[U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190731
2019-07-31 19:57 UTC
[U-Boot] U-Boot/EBBR plugfest at ELC-EU?
2019-07-31 19:16 UTC (11+ messages)
` [U-Boot] (Offlist) "
[U-Boot] [PATCH v4] board/BuR/brsmarc1: initial commit
2019-07-31 18:18 UTC (2+ messages)
[U-Boot] [RFC] drivers: dma: ti-edma3: Enable edma3-tpcc
2019-07-31 17:07 UTC (2+ messages)
[U-Boot] [PATCH v2 1/2] dm: core: device: switch off power domain after device removal
2019-07-31 17:02 UTC (11+ messages)
` [U-Boot] [PATCH v2 2/2] serial: lpuart: request dm device removal when booting OS
[U-Boot] [PATCH 1/2] avb: Fix build when CONFIG_OPTEE_TA_AVB is disabled
2019-07-31 16:59 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] cmd: avb: Fix compiler warnings
[U-Boot] [PATCH] board_r: re-order the board_early_init_r()
2019-07-31 16:53 UTC (6+ messages)
[U-Boot] [PATCH 2/2] watchdog: omap_wdt: Disable DM watchdog support in SPL
2019-07-31 16:24 UTC (3+ messages)
` [U-Boot] [PATCH v2 1/2] watchdog: omap_wdt: Convert watchdog driver to use DT and DM
` [U-Boot] [PATCH v2 2/2] watchdog: omap_wdt: Disable DM watchdog support in SPL
[U-Boot] [PATCH 0/4] add pcie/ahci for mt7623/bpi-r2
2019-07-31 16:09 UTC (10+ messages)
` [U-Boot] [PATCH 1/4] ahci-pci: ASM1061 report wrong class, but support AHCI
` [U-Boot] [PATCH 2/4] ata: ahci: Don't forget to clear upper address regs
` [U-Boot] [PATCH 3/4] pci: mediatek: Add pci-driver for mt2701
` [U-Boot] [PATCH 4/4] arm: dts: Add PCI-E controller for mt7623
[U-Boot] [PATCH] ARM: omap3: overo: Fix MMC init for SPL
2019-07-31 15:30 UTC
[U-Boot] [PATCH 1/7] net: sh_eth: Add R8A77980 V3H gether support
2019-07-31 15:21 UTC (7+ messages)
` [U-Boot] [PATCH 2/7] net: sh_eth: Fix 64bit build warnings
` [U-Boot] [PATCH 3/7] pinctrl: renesas: Add R8A77980 V3H PFC tables
` [U-Boot] [PATCH 4/7] clk: renesas: Add R8A77980 V3H clock tables
` [U-Boot] [PATCH 5/7] ARM: dts: renesas: Add R8A77980 V3H DTs and headers
` [U-Boot] [PATCH 6/7] ARM: renesas: Add R8A77980 V3H platform code
` [U-Boot] [PATCH 7/7] ARM: renesas: Add R8A77980 V3H Condor board code
[U-Boot] [PATCH] Revert "ARM: davinci: da850: Manual pinmux only when PINCTRL not available"
2019-07-31 14:17 UTC
[U-Boot] imx7d: CPU core issue in secure mode
2019-07-31 14:12 UTC (5+ messages)
[U-Boot] [PATCH 1/1] sunxi: Fix pll1 clock calculation
2019-07-31 13:15 UTC
[U-Boot] question about spi flash driver for large ST micro
2019-07-31 12:37 UTC
[U-Boot] Please pull u-boot-video
2019-07-31 12:34 UTC (2+ messages)
[U-Boot] [GIT PULL] Xilinx/FPGA patches for v2019.10
2019-07-31 12:33 UTC (2+ messages)
[U-Boot] [PULL] u-boot-sh/master
2019-07-31 12:33 UTC (2+ messages)
[U-Boot] [GIT] Pull request: u-boot-clk (31.07.2019)
2019-07-31 12:22 UTC
[U-Boot] [PATCH v2] rpi: increase SYS_BOOTM_LEN to 64M on ARM64
2019-07-31 11:59 UTC
[U-Boot] [PATCH 0/3] amlogic: Add support for Odroid-N2
2019-07-31 9:54 UTC (4+ messages)
[U-Boot] [PATCH] rpi: increase SYS_BOOTM_LEN to 64M
2019-07-31 8:52 UTC (3+ messages)
[U-Boot] [PATCH] sifive: riscv: streamline HiFive Unleashed configuration infrastructure
2019-07-31 8:32 UTC (8+ messages)
` [U-Boot] [PATCH] sifive: riscv: update Hifive "
[U-Boot] [PATCH] imx: mx6slevk: enable DM_SPI and DM_SPI_FLASH
2019-07-31 8:30 UTC
[U-Boot] [PATCH] rpi3: Enable verified boot from FIT image
2019-07-31 8:16 UTC (2+ messages)
[U-Boot] [PATCH] pci_ep: Fix Coverity warning
2019-07-31 8:04 UTC
[U-Boot] [PATCH] ARM: dts: Sync Amlogic G12A with Linux 5.3-rc1
2019-07-31 7:23 UTC (2+ messages)
[U-Boot] [PATCH 1/1] clk: meson: remove duplicate logic
2019-07-31 7:17 UTC (2+ messages)
[U-Boot] [PATCH V3 01/16] clk: introduce clk_dev_binded
2019-07-31 7:02 UTC (16+ messages)
` [U-Boot] [PATCH V3 02/16] clk: use clk_dev_binded
` [U-Boot] [PATCH V3 03/16] clk: mux: add set parent support
` [U-Boot] [PATCH V3 04/16] clk: export mux/divider ops
` [U-Boot] [PATCH V3 05/16] clk: add clk-gate support
` [U-Boot] [PATCH V3 06/16] clk: divider set rate supporrt
` [U-Boot] [PATCH V3 07/16] clk: fixed_rate: export clk_fixed_rate
` [U-Boot] [PATCH V3 08/16] clk: imx: import clk heplers
` [U-Boot] [PATCH V3 09/16] clk: imx: gate2 add set rate
` [U-Boot] [PATCH V3 10/16] dm: clk: ignore default settings when node not valid
` [U-Boot] [PATCH V3 11/16] clk-provider: include clk-uclass.h
` [U-Boot] [PATCH V3 12/16] clk: add composite clk support
` [U-Boot] [PATCH V3 13/16] clk: gate: support sandbox
` [U-Boot] [PATCH V3 14/16] configs: sandbox: Enable composite clk
` [U-Boot] [PATCH V3 15/16] clk: sandbox: add "
` [U-Boot] [PATCH V3 16/16] test: dm: clk_ccf: test "
[U-Boot] x86 FSP 2
2019-07-31 3:03 UTC (4+ messages)
[U-Boot] [PATCH v2 1/1] test: dm_mdio: avoid out of bounds access
2019-07-30 22:21 UTC (2+ messages)
[U-Boot] [PATCH 1/1] drivers: net: pfe_eth: undefined return value
2019-07-30 22:20 UTC (2+ messages)
[U-Boot] [PATCH] net: mvpp2: support setting hardware addresses from ethernet core
2019-07-30 22:19 UTC (4+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH 1/2] net: Fix Covarity Defect 244093
2019-07-30 21:57 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] net: mdio: Clarify code flow Covarity 244085 & 244090
[U-Boot] [PATCH 1/1] test: dm_mdio: avoid out of bounds access
2019-07-30 21:44 UTC
[U-Boot] [PATCH 1/1] nand: davinci: avoid out of bounds array access
2019-07-30 21:29 UTC
[U-Boot] [PATCH 0/10] x86: Add generic VESA video driver
2019-07-30 20:52 UTC (3+ messages)
` [U-Boot] [PATCH 05/10] bios_emulator: Add some VESA interface debugging
[U-Boot] [PATCH 1/5] armv8: fsl-layerscape: add missing sec jr base address defines
2019-07-30 20:00 UTC (8+ messages)
` [U-Boot] [PATCH 3/5] armv8: fsl-layerscape: make icid setup endianness aware
` [U-Boot] [PATCH 4/5] armv8: ls1088a: add icid setup for platform devices
` [U-Boot] [PATCH 5/5] armv8: ls1028a: "
[U-Boot] [PATCH v2 0/4] efi_loader: implement ConvertPointer()
2019-07-30 19:35 UTC (5+ messages)
` [U-Boot] [PATCH v2 1/4] efi_selftest: fix SetVirtualAddressMap unit test
` [U-Boot] [PATCH v2 2/4] efi_loader: definition of efi_virtual_address_map()
` [U-Boot] [PATCH v2 3/4] efi_loader: implement ConvertPointer()
` [U-Boot] [PATCH v2 4/4] efi_selftest: sharpen ConvertPointer() test
[U-Boot] [PATCH 00/48] stm32mp1 patches for v2019.10
2019-07-30 17:16 UTC (7+ messages)
` [U-Boot] [PATCH 43/48] stm32mp1: ram: reload watchdog during ddr test
` [U-Boot] [PATCH 44/48] stm32mp1: ram: add pattern parameter in infinite write test
` [U-Boot] [PATCH 45/48] stm32mp1: Makefile cleanup
` [U-Boot] [PATCH 46/48] stm32mp1: clk: remove debug traces
` [U-Boot] [PATCH 47/48] stm32mp1: clk: use gd to store frequency information
` [U-Boot] [PATCH 48/48] MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox