messages from 2019-08-08 07:09:12 to 2019-08-09 17:21:02 UTC [more...]
[U-Boot] Pull request, u-boot-tegra/master
2019-08-09 17:21 UTC
[U-Boot] [PATCH v1] apalis-tk1: support v1.2 hardware revision
2019-08-09 17:04 UTC (3+ messages)
[U-Boot] RFC: Migration target date for DM_ETH
2019-08-09 17:02 UTC (2+ messages)
[U-Boot] [PATCH] board_f: reserve noncached space below malloc area
2019-08-09 17:00 UTC (2+ messages)
[U-Boot] [PATCH V3 0/4] Prepare i.MX8MM clk
2019-08-09 16:59 UTC (12+ messages)
` [U-Boot] [PATCH V3 1/4] clk: imx: add Kconfig entry for i.MX8MM
` [U-Boot] [PATCH V3 2/4] clk: imx: add pll14xx driver
` [U-Boot] [PATCH V3 3/4] clk: imx: add i.MX8M composite clk support
` [U-Boot] [PATCH V3 4/4] clk: imx: add i.MX8MM clk driver
[U-Boot] drivers: net: driver for MDIO muxes controlled over I2C
2019-08-09 16:48 UTC (3+ messages)
[U-Boot] [PATCH v2 1/5] arm: dts: sync dts for i.MX6UL
2019-08-09 16:46 UTC (15+ messages)
` [U-Boot] [PATCH v2 2/5] arm: dts: sync dts for i.MX6ULL
` [U-Boot] [PATCH v2 3/5] arm: dts: import dts for i.MX6ULZ
` [U-Boot] [PATCH v2 4/5] imx: add i.MX6ULZ cpu type
` [U-Boot] [PATCH v2 5/5] imx: add i.MX6ULZ board
[U-Boot] [PATCH] cmd: avb: Fix requested partitions list
2019-08-09 16:16 UTC
[U-Boot] Please pull u-boot-mmc-20190809
2019-08-09 16:08 UTC (2+ messages)
[U-Boot] Pull request: u-boot-rockchip-20190809
2019-08-09 16:08 UTC (2+ messages)
[U-Boot] Booting Linux kernel on x86_64
2019-08-09 16:00 UTC (2+ messages)
[U-Boot] [PATCH 0/3] Intel FPGA PCIe fixes
2019-08-09 15:30 UTC (4+ messages)
[U-Boot] [PATCH] board: ls1028a: set up integrated PCI stream IDs and cache attributes
2019-08-09 14:31 UTC (5+ messages)
[U-Boot] [PATCH 00/11] Aquantia PHY driver updates to reduce FW dependency
2019-08-09 13:17 UTC (14+ messages)
` [U-Boot] [PATCH 01/11] include: phy: define XFI and USXGMII interface types
` [U-Boot] [PATCH 02/11] include: phy: add data field for private driver data
` [U-Boot] [PATCH 03/11] drivers: net: aquantia: use XFI, USXGMII interface types
` [U-Boot] [PATCH 04/11] drivers: net: aquantia: add PHY generation information
` [U-Boot] [PATCH 05/11] drivers: net: aquantia: set up SI protocol based on interface type
` [U-Boot] [PATCH 06/11] drivers: net: aquantia: set MDI reversal based on DT property
` [U-Boot] [PATCH 07/11] drivers: net: aquantia: set SMBus addr "
` [U-Boot] [PATCH 08/11] drivers: net: aquantia: use SI and LI status in loop waiting for link up
` [U-Boot] [PATCH 09/11] doc: bindings: add bindings document for PHY nodes
` [U-Boot] [PATCH 10/11] doc: bindings: Aquantia PHY node binding
` [U-Boot] [PATCH 11/11] drivers: net: fsl_enetc: use XFI, USXGMII interface type macros
[U-Boot] [PATCH] cmd: avb: Support A/B slots
2019-08-09 12:38 UTC
[U-Boot] [PATCH] image: android: Fix possible build errors
2019-08-09 12:31 UTC
[U-Boot] GitLab: make pipeline status public
2019-08-09 10:47 UTC (5+ messages)
[U-Boot] [PATCH] cmd: pxe: Use internal FDT if FDT file isn't found in FDTDIR
2019-08-09 10:20 UTC
[U-Boot] [PATCH 1/7] mmc: atmel_sdhci: fix uninitialized pointer deref on probe
2019-08-09 9:32 UTC (8+ messages)
[U-Boot] [PATCH] test/py: Fix MMC/SD block write test dependency
2019-08-09 9:32 UTC (2+ messages)
[U-Boot] [BISECTED] [BUG]: MMC initialization hang at Zynq Z-turn board
2019-08-09 9:31 UTC (3+ messages)
` [U-Boot] [PATCH] mmc: zynq_sdhci: fix uninitialized pointer deref on probe
[U-Boot] [PATCH] mmc: Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected
2019-08-09 9:31 UTC (2+ messages)
[U-Boot] [PATCH u-boot-marvell 1/1] pci: pci_mvebu: set BAR0 after memory space is set
2019-08-09 8:57 UTC (3+ messages)
[U-Boot] [PATCH v2 00/11] dm: Convert TPC70 to use DM and DTS in SPL and u-boot proper
2019-08-09 7:11 UTC (17+ messages)
` [U-Boot] [PATCH v2 01/11] imx: tpc70: config: Add script commands to update u-boot and OE's wic
` [U-Boot] [PATCH v2 02/11] imx: tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update
` [U-Boot] [PATCH v2 03/11] imx: tpc70: Add board_boot_order() to distinguish between eMMC and SD boot
` [U-Boot] [PATCH v2 04/11] imx: tpc70: DTS: Explicitly add imx6q-kp.dtb to Makefile for DTB compilation
` [U-Boot] [PATCH v2 05/11] imx: tpc70: cosmetic: Replace magic numbers when setting ENET clock
` [U-Boot] [PATCH v2 06/11] imx: tpc70: led: Enable LED default state
` [U-Boot] [PATCH v2 07/11] imx: tpc70: dts: Add TPC70 board (imx6q based) device tree description
` [U-Boot] [PATCH v2 10/11] imx: spl: tpc70: Do not remove clock related properties from DTS
[U-Boot] [PATCH V2 0/4] Prepare i.MX8MM clk
2019-08-09 6:56 UTC (7+ messages)
` [U-Boot] [PATCH V2 1/4] clk: imx: add Kconfig entry for i.MX8MM
` [U-Boot] [PATCH V2 2/4] clk: imx: add pll14xx driver
` [U-Boot] [PATCH V2 3/4] clk: imx: add i.MX8M composite clk support
` [U-Boot] [PATCH V2 4/4] clk: imx: add i.MX8MM clk driver
[U-Boot] [PATCH 0/4] Make some changes to SDP
2019-08-09 6:21 UTC (8+ messages)
` [U-Boot] 答复: "
` [U-Boot] 答复: "
` [U-Boot] 答复: "
[U-Boot] [PATCH] arm: baltos: switch to driver model for the watchdog timer
2019-08-09 5:40 UTC
[U-Boot] [PATCH] arm: baltos: use device tree alias to access Ethernet slave
2019-08-09 5:21 UTC
[U-Boot] [PATCH 00/22] i.MX8MM support
2019-08-09 4:15 UTC (23+ messages)
` [U-Boot] [PATCH 01/22] tools: imx8m_image: align spl bin image size
` [U-Boot] [PATCH 02/22] ddr: imx8m: fix ddr firmware location when enable SPL OF
` [U-Boot] [PATCH 03/22] imx8m: add image cfg for i.MX8MM lpddr4
` [U-Boot] [PATCH 04/22] imx: add IMX8MQ kconfig entry
` [U-Boot] [PATCH 05/22] imx: add IMX8MM "
` [U-Boot] [PATCH 06/22] imx: imx8mm: add clock bindings header
` [U-Boot] [PATCH 07/22] imx: add i.MX8MM cpu type
` [U-Boot] [PATCH 08/22] imx: spl: add spl_board_boot_device for i.MX8MM
` [U-Boot] [PATCH 09/22] imx8m: update imx-regs "
` [U-Boot] [PATCH 10/22] imx: add get_cpu_rev support "
` [U-Boot] [PATCH 11/22] imx8m: add pin header "
` [U-Boot] [PATCH 12/22] imx: add i.MX8MM PE property
` [U-Boot] [PATCH 13/22] imx8m: Fix MMU table issue for OPTEE memory
` [U-Boot] [PATCH 14/22] imx8m: set BYPASS ID SWAP to avoid AXI bus errors
` [U-Boot] [PATCH 15/22] imx8m: Configure trustzone region 0 for non-secure access
` [U-Boot] [PATCH 16/22] imx8m: soc: enable SCTR clock before timer init
` [U-Boot] [PATCH 17/22] imx8m: rename clock to clock_imx8mq
` [U-Boot] [PATCH 18/22] imx8m: restructure clock.h
` [U-Boot] [PATCH 19/22] imx8m: add clk support for i.MX8MM
` [U-Boot] [PATCH 20/22] arm: dts: import i.MX8MM dtsi
` [U-Boot] [PATCH 21/22] arm: dts: add i.MX8MM pin func
` [U-Boot] [PATCH 22/22] imx: Add i.MX8MM EVK board support
[U-Boot] Please pull u-boot-marvell/master (watchdog related)
2019-08-09 3:20 UTC (2+ messages)
[U-Boot] [PATCH v9 8/9] board: intel: Add new slimbootloader board
2019-08-09 1:38 UTC (5+ messages)
[U-Boot] [PATCH 1/3] spl: imx6: Let spl_boot_device return USDHC1 or USDHC2
2019-08-09 0:58 UTC (5+ messages)
[U-Boot] [PATCH 0/4] i.MX8M ddr update/fix
2019-08-09 0:52 UTC (7+ messages)
` [U-Boot] [PATCH 1/4] ddr: imx8m: Fix ddr4 driver build issue
` [U-Boot] [PATCH 2/4] imx8mq: Update the ddrc QoS setting for B1 chip
` [U-Boot] [PATCH 3/4] driver: ddr: Refine the ddr init driver on imx8m
` [U-Boot] [PATCH 4/4] ddr: imx8m: Fix the ddr init hang on imx8mq
[U-Boot] [PATCH v2 00/12] System Firmware Loader for TI K3 family SoCs
2019-08-08 20:01 UTC (15+ messages)
` [U-Boot] [PATCH v2 05/12] armV7R: K3: am654: Allow using SPL BSS pre-relocation
[U-Boot] [RFC PATCH 0/2] Add a driver for the Felix Ethernet switch on NXP LS1028A
2019-08-08 19:18 UTC (4+ messages)
` [U-Boot] [RFC PATCH 1/2] drivers: net: "
` [U-Boot] [RFC PATCH 2/2] arm: dts: ls1028a: add node for the integrated Ethernet switch
[U-Boot] [PATCH v2] ARM: imx: Support larger SPL size on IMX6DQ
2019-08-08 18:36 UTC (2+ messages)
[U-Boot] [PATCH] README: Clarify use of BSS during SPL board_init_f()
2019-08-08 18:21 UTC (2+ messages)
[U-Boot] [PATCH] riscv: cpu: Skip unavailable hart in the get_count() op
2019-08-08 14:57 UTC (6+ messages)
[U-Boot] [PATCH v9 9/9] x86: Skip setting up MTRRs in slimbootloader
2019-08-08 14:54 UTC (3+ messages)
[U-Boot] [PATCH v9 7/9] x86: slimbootloader: Add a slimbootloader device tree
2019-08-08 14:54 UTC (3+ messages)
[U-Boot] [PATCH v9 6/9] x86: slimbootloader: Set TSC information for tsc_timer
2019-08-08 14:53 UTC (3+ messages)
[U-Boot] [PATCH v9 5/9] x86: slimbootloader: Add serial driver
2019-08-08 14:53 UTC (3+ messages)
[U-Boot] [PATCH v9 4/9] x86: slimbootloader: Add memory configuration
2019-08-08 14:53 UTC (3+ messages)
[U-Boot] [PATCH v9 3/9] x86: Add a common HOB library
2019-08-08 14:53 UTC (2+ messages)
[U-Boot] [PATCH v9 2/9] x86: lib: fsp: Use EFI_GUID and efi_guid_t
2019-08-08 14:52 UTC (2+ messages)
[U-Boot] [PATCH v9 1/9] x86: Add new slimbootloader CPU type
2019-08-08 14:52 UTC (3+ messages)
[U-Boot] [PATCH v4] x86: ich-spi: Convert driver to spi-mem ops
2019-08-08 14:50 UTC (3+ messages)
[U-Boot] [PATCH 1/1] bios_emulator: remove stray break
2019-08-08 14:50 UTC (3+ messages)
[U-Boot] [PATCH] x86: qemu: Fix non-working ramboot and nfsboot environment variables
2019-08-08 14:50 UTC (2+ messages)
[U-Boot] [PATCH v8 1/9] x86: Add new slimbootloader CPU type
2019-08-08 14:35 UTC (2+ messages)
[U-Boot] [PATCH v1] MAINTAINERS: Add entries for Android A/B and AVB
2019-08-08 12:52 UTC (2+ messages)
[U-Boot] [PATCH] riscv: qemu: Fix kconfig build warning
2019-08-08 11:13 UTC (2+ messages)
[U-Boot] U-Boot/EBBR plugfest at ELC-EU?
2019-08-08 11:06 UTC (12+ messages)
` [U-Boot] (Offlist) "
[U-Boot] [PATCH v2 00/11] SPL support for RISC-V
2019-08-08 9:49 UTC (7+ messages)
[U-Boot] [PATCH v0] rockchip: rk3399: Add ROC-RK3399-PC support
2019-08-08 9:47 UTC (2+ messages)
[U-Boot] [PATCH v3 00/18] Fixes for the DWC3 USB generic driver
2019-08-08 9:39 UTC (5+ messages)
` [U-Boot] [PATCH v3 13/18] usb: dwc3: Kconfig: get rid of obsolete mode selection
[U-Boot] [RESEND PATCH] ARM: socfpga: update CONFIG_SPL_FS_LOAD_PAYLOAD_NAME to u-boot.img
2019-08-08 9:37 UTC (2+ messages)
[U-Boot] [PATCH] usb: dwc3: Kconfig: get rid of obsolete mode selection
2019-08-08 9:36 UTC (3+ messages)
[U-Boot] [PATCH v2] armv8: fsl-layerscape: Correct I2C clock divider for some of the plarforms
2019-08-08 9:04 UTC
[U-Boot] [PATCH 0/3] USB: Add cadence USB3 gadget driver and host driver
2019-08-08 9:03 UTC (4+ messages)
` [U-Boot] 答复: "
[U-Boot] [PATCH v3 1/2] disk: update to use SPL_PARTITIONS for SPL
2019-08-08 8:14 UTC (2+ messages)
` [U-Boot] [PATCH v3 2/2] part: always enable part_get_info_ptr() for driver
[U-Boot] [PATCH 1/2] armv8: ls1028a: configure PMU's PCTBENR to enable WDT
2019-08-08 8:00 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] watchdog: sp805_wdt: add expire_now method
[U-Boot] [PATCH 1/7] ARM: at91: Add the chip ID for SAMA5D2 LPDDR2 SiP
2019-08-08 7:48 UTC (7+ messages)
` [U-Boot] [PATCH 2/7] board: atmel: add sama5d27_wlsom1_ek board
` [U-Boot] [PATCH 3/7] ARM: at91: sfr: convert to Kconfig
` [U-Boot] [PATCH 4/7] ARM: at91: sfr: implement DDR input buffers open function
` [U-Boot] [PATCH 5/7] board: laird: wb50n: use configure_ddrcfg_input_buffers
` [U-Boot] [PATCH 6/7] ARM: at91: mpddrc: add lpddr2 initialization procedure
` [U-Boot] [PATCH 7/7] board: atmel: sama5d2_wlsom1_ek: add SPL support
[U-Boot] [PATCH 0/4] Prepare i.MX8MM clk
2019-08-08 7:09 UTC (4+ messages)
` [U-Boot] [PATCH 4/4] clk: imx: add i.MX8MM clk driver
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox