messages from 2019-10-14 07:27:58 to 2019-10-14 17:34:53 UTC [more...]
[U-Boot] [PATCH v5 00/15] splash screen on the stm32f769 & stm32mp1 boards
2019-10-14 17:34 UTC (25+ messages)
` [U-Boot] [PATCH v5 02/15] video: stm32: stm32_ltdc: add bridge to display controller
` [U-Boot] [PATCH v5 03/15] include: Add new DCS commands in the enum list
` [U-Boot] [PATCH v5 04/15] video: add support of MIPI DSI interface
` [U-Boot] [PATCH v5 05/15] dm: Add a dsi host uclass
` [U-Boot] [PATCH v5 06/15] video: add MIPI DSI host controller bridge
` [U-Boot] [PATCH v5 07/15] video: add support of STM32 MIPI DSI controller driver
` [U-Boot] [PATCH v5 08/15] video: add support of panel OTM8009A
` [U-Boot] [PATCH v5 09/15] video: add support of panel RM68200
` [U-Boot] [PATCH v5 10/15] board: Add STM32F769 SoC, discovery board support
` [U-Boot] [PATCH v5 11/15] ARM: dts: stm32f769: add display for STM32F769 disco board
` [U-Boot] [PATCH v5 12/15] ARM: dts: stm32mp1: add dsi host for stm32mp157c-ev1 board
` [U-Boot] [PATCH v5 13/15] ARM: dts: stm32mp1: add dsi host for stm32mp157c-dk2 board
[U-Boot] Please pull u-boot-video
2019-10-14 17:00 UTC (2+ messages)
[U-Boot] [PULL] u-boot-mmc mmc-10-10-2019
2019-10-14 17:00 UTC (2+ messages)
[U-Boot] cmd: clarification on 'env ask' command execution
2019-10-14 16:44 UTC
[U-Boot] [PATCH 0/5] remoteproc: add elf resource table loader
2019-10-14 15:53 UTC (10+ messages)
` [U-Boot] [PATCH 3/5] remoteproc: stm32: load resource table from firmware
` [U-Boot] [PATCH 4/5] stm32mp1: Fixup the Linux DeviceTree with coprocessor information
` [U-Boot] [PATCH 5/5] remoteproc: stm32: invert the is_running() return value
[U-Boot] [PATCH 26/34] binman: Correct symbol calculation with non-zero image base
2019-10-14 15:49 UTC (4+ messages)
` [U-Boot] [PATCH 00/34] binman: Various improvements and tidy-ups
[U-Boot] [PATCH v1] imx: defconfig: Enable CONFIG_SPL_FORCE_MMC_BOOT on display5
2019-10-14 15:43 UTC
[U-Boot] [PATCH v4 0/3] env: Add CONFIG_ENV_FULL_SUPPORT
2019-10-14 14:46 UTC (3+ messages)
[U-Boot] [ANN] U-Boot v2019.10 released
2019-10-14 14:39 UTC (8+ messages)
[U-Boot] [BUG] cmd : Local Hush Variable Could not be deleted
2019-10-14 14:35 UTC (3+ messages)
[U-Boot] [PATCH] net: phy: aquantia: wait for phy init sequence to finish
2019-10-14 14:27 UTC
[U-Boot] [PATCH 0/7] arm64: zynqmp: Switch to use dt-binding headers
2019-10-14 14:19 UTC (8+ messages)
` [U-Boot] [PATCH 1/7] dt-bindings: clock: zynqmp: Add clk header
` [U-Boot] [PATCH 2/7] arm64: zynqmp: Switch to xlnx-zynqmp-clk header
` [U-Boot] [PATCH 3/7] arm64: zynqmp: Use backward compatible string for gem
` [U-Boot] [PATCH 4/7] dt-bindings: arm64: zynqmp: Add power and reset headers
` [U-Boot] [PATCH 5/7] arm64: zynqmp: Use reset header in zynqmp.dtsi
` [U-Boot] [PATCH 6/7] arm64: zynqmp: Use power "
` [U-Boot] [PATCH 7/7] arm64: zynqmp: List lpd watchdog in dtsi
[U-Boot] [PATCH] arm64: zynqmp: Update nand device tree node properties
2019-10-14 14:12 UTC
[U-Boot] [PATCH] arm64: zynqmp: Fix DT style for ipi mailbox
2019-10-14 14:09 UTC
[U-Boot] [PATCH 0/3] cmd: fru: Add simple FRU generator and parser
2019-10-14 13:29 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] cmd: fru: Add support for FRU commands
` [U-Boot] [PATCH 2/3] cmd: fru: Add basic fru format generator
` [U-Boot] [PATCH 3/3] arm64: versal: Enable FRU command
[U-Boot] [PATCH 0/2] spi: cadence-qspi: Move to spi-mem APIs
2019-10-14 13:27 UTC (3+ messages)
` [U-Boot] [PATCH 1/2] spi: cadence_qspi: Move to spi-mem framework
` [U-Boot] [PATCH 2/2] spi: cadence-qspi: Add direct mode support
[U-Boot] [PATCH] zynqmp: configs: Add single nand flash mini u-boot configuration
2019-10-14 13:01 UTC
[U-Boot] [PATCH 0/3] crypto: Add manual relocation
2019-10-14 12:56 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] common: hash: Manually relocate struct hash_algo
` [U-Boot] [PATCH 2/3] drivers: crypto: rsa_mod_exp: Add manual relocation for ops->mod_exp()
` [U-Boot] [PATCH 3/3] common: image-sig.c: Add manual relocation
[U-Boot] [PATCH] ARM: dt: Also clean dtbo files
2019-10-14 12:54 UTC
[U-Boot] [PATCH] usb: composite: add BOS descriptor support to composite framework
2019-10-14 12:52 UTC
[U-Boot] [PATCH] arm64: zynqmp: Do not remove dpll_prog from psu_init
2019-10-14 12:51 UTC
[U-Boot] [GIT PULL] Pull request: u-boot-imx u-boot-imx-20191014
2019-10-14 12:51 UTC
[U-Boot] [PATCH] arm64: versal: Fix sdhci node address for versal-mini-emmc1
2019-10-14 12:50 UTC
[U-Boot] [PATCH v2] spl: Introduce SPL_DM_GPIO Kconfig define
2019-10-14 12:41 UTC (4+ messages)
[U-Boot] [PATCH v3 9/9] imx: config: Update KP's TPC70 config to support SWUpdate
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH v3 6/9] imx: tpc70: dts: Add TPC70 board (imx6q based) device tree description
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH v3 8/9] imx: tpc70: Convert TPC70 (imx6q) board to use DM/DTS in SPL and u-boot
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH 1/4] imx: Place imx_ddr_size() into a separate file
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH v3 3/9] imx: tpc70: Add board_boot_order() to distinguish between eMMC and SD boot
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH v1 2/2] board: colibri_imx7: reserve DDR memory for Cortex-M4
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH 3/3] ARM: imx6q_logic: Remove legacy pinmuxing code from board file
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH 2/3] board: tbs2910: Convert pci to driver model
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH 4/4] mx7ulp_evk: Use imx_ddr_size()
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH v3 2/9] imx: tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH 2/2] Add i.MX7D based Meerkat96 board support
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH v1 4/4] colibri_imx7: remove legacy sdboot wrapper
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH v1 1/4] apalis_imx6: remove legacy sdboot wrapper
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH 3/4] imx: mmdc_size: Allow building it for i.MX7ULP
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH 1/3] ARM: imx6q_logic: Enable 256KB OCRAM
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH v3 7/9] imx: dts: Add u-boot specific set of device tree properties for tpc70
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH 2/3] ARM: imx6q_logic: Enable Pin muxing in SPL
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH v1 2/4] colibri-imx6ull: remove legacy sdboot wrapper
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH v3 5/9] imx: tpc70: led: Enable LED default state
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH v1 1/2] common: fdt_support: add support for setting usable memory
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH] imx :hab: Add hab version command
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH 1/2] imx8: Jump from alias to OCRAM address at SPL init
2019-10-14 12:40 UTC
[U-Boot] [PATCH 1/3] ARM: dts: imx6q-tbs2910: Sync devicetree with kernel 5.3
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH 3/3] board: tbs2910: Convert eth to driver model
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH 1/2] mx6: mx6sabre common: Use more conventional spelling of fdtfile
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH 2/4] imx: mmdc_size: Fix checkpatch warnings
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH 2/2] imx8qm/qxp: Set SPL TEXT base to OCRAM base
2019-10-14 12:40 UTC
[U-Boot] [PATCH 2/3] pico-imx7d: Support distro boot for FIT image case
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH] i2c: imx_lpi2c: add ipg clk
2019-10-14 12:40 UTC
[U-Boot] [PATCH v3 4/9] imx: tpc70: cosmetic: Replace magic numbers when setting ENET clock
2019-10-14 12:40 UTC (2+ messages)
[U-Boot] [PATCH] imx: sys_proto: Fixing function imx6_is_bmode_from_gpr9()
2019-10-14 12:27 UTC
[U-Boot] [PATCH v2 0/4] xilinx: firmware: Synchronization firmware functions
2019-10-14 11:45 UTC (5+ messages)
` [U-Boot] [PATCH v2 1/4] arm64: versal: Clean pm_api_id usage
` [U-Boot] [PATCH v2 2/4] arm64: xilinx: Move firmware functions from platform to driver
` [U-Boot] [PATCH v2 3/4] arm64: versal: Rename versal_pm_request to xilinx_pm_request
` [U-Boot] [PATCH v2 4/4] arm64: zynqmp: Convert invoke_smc() to xilinx_pm_request()
[U-Boot] [PATCH] pci: layerscape: Only set EP CFG READY bit
2019-10-14 11:43 UTC
[U-Boot] [PATCH] imx: update i.MX8MQ device trees
2019-10-14 11:19 UTC
[U-Boot] [PATCH] spi: zynqmp: Remove unused platform headers
2019-10-14 11:16 UTC
[U-Boot] [PATCH] nvme: add more cache flushes
2019-10-14 11:11 UTC
[U-Boot] [PATCH] nvme: use page-aligned buffer for identify command
2019-10-14 11:10 UTC
[U-Boot] [PATCH 0/7] arm64: versal: Enable several features
2019-10-14 11:04 UTC (8+ messages)
` [U-Boot] [PATCH 1/7] arm64: versal: Enable LIBFDT_OVERLAY
` [U-Boot] [PATCH 2/7] arm64: versal: Enable USB driver support
` [U-Boot] [PATCH 3/7] arm64: versal: Enable CLK command
` [U-Boot] [PATCH 4/7] arm64: versal: Increase SYS_MALLOC_F_LEN
` [U-Boot] [PATCH 5/7] arm64: versal: Update boot delay to perform autoboot
` [U-Boot] [PATCH 6/7] arm64: versal: Enable bit stream loading support for versal platform
` [U-Boot] [PATCH 7/7] arm64: versal: Enable UHS support
[U-Boot] [PATCH] imx: require CCM driver only on i.MX8MM
2019-10-14 10:52 UTC
[U-Boot] [BUG] cmd : 'env exists envvar' does not display the existence of environment variable
2019-10-14 10:36 UTC (2+ messages)
[U-Boot] [PATCH 00/27] arm64: zynqmp: Update DT files
2019-10-14 10:16 UTC (28+ messages)
` [U-Boot] [PATCH 01/27] arm64: zynqmp: Sync names for SC with Versal
` [U-Boot] [PATCH 02/27] arm64: zynqmp: Use ethernet-phy as node name for ethernet phys
` [U-Boot] [PATCH 03/27] arm64: zynqmp: Enable iio-hwmon for ina226 on g-a2197-00
` [U-Boot] [PATCH 04/27] arm64: zynqmp: Add label property to all "
` [U-Boot] [PATCH 05/27] arm64: zynqmp: Fix i2c address of u70 on p-a2197-00 board
` [U-Boot] [PATCH 06/27] arm64: zynqmp: Added new tps53679 compatible string for a2197-0x boards
` [U-Boot] [PATCH 07/27] arm64: zynqmp: Fix typo in zynqmp-p-a2197-00-revA
` [U-Boot] [PATCH 08/27] arm64: zynqmp: Enable iio-hwmon for ina226 on m-a2197-01
` [U-Boot] [PATCH 09/27] arm64: zynqmp: Add label property to all "
` [U-Boot] [PATCH 10/27] arm64: zynqmp: Switch spi-flash to jedec, spi-nor on m-a2197
` [U-Boot] [PATCH 11/27] arm64: zynqmp: Fix m-a2197-01 DT based on latest schematics
` [U-Boot] [PATCH 12/27] arm64: zynqmp: Sync si570 setup and clock names
` [U-Boot] [PATCH 13/27] arm64: zynqmp: Remove fixme about memory size on zynqmp-p-a2197
` [U-Boot] [PATCH 14/27] arm64: zynqmp: dt: Delete no-1-8-v property from zcu102-rev1.0
` [U-Boot] [PATCH 15/27] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111
` [U-Boot] [PATCH 16/27] arm64: zynqmp: Add label property to all "
` [U-Boot] [PATCH 17/27] arm64: zynqmp: Fix the si570 clock frequency "
` [U-Boot] [PATCH 18/27] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106
` [U-Boot] [PATCH 19/27] arm64: zynqmp: Add label property to all "
` [U-Boot] [PATCH 20/27] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu104
` [U-Boot] [PATCH 21/27] arm64: zynqmp: Enable fpd_dma for zcu104 platforms
` [U-Boot] [PATCH 22/27] arm64: zynqmp: dt: Add missing DP83867 quirk
` [U-Boot] [PATCH 23/27] arm64: zynqmp: dt: Add optional gpio phy reset properties
` [U-Boot] [PATCH 24/27] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102
` [U-Boot] [PATCH 25/27] arm64: zynqmp: Add label property to all "
` [U-Boot] [PATCH 26/27] arm64: zynqmp: Turn comment to gpio-line-names
` [U-Boot] [PATCH 27/27] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100
[U-Boot] [PATCH 0/2] Fix memory instability on ROCK64
2019-10-14 10:07 UTC (7+ messages)
` [U-Boot] [PATCH 1/2] ram: rk3328: Use correct frequency units in function
` [U-Boot] [PATCH 1/2] ram: rk3328: Use correct frequency units in function【请注意，邮件由u-boot-bounces@lists.denx.de代发】 "
` [U-Boot] [PATCH 2/2] ram: rk3328: Fix loading of skew values
` [U-Boot] [PATCH 2/2] ram: rk3328: Fix loading of skew values【请注意，邮件由u-boot-bounces@lists.denx.de代发】
[U-Boot] [NXP-IMX] please pull imx-master-10-14
2019-10-14 10:02 UTC (3+ messages)
[U-Boot] [PATCH v2] arm: add initial support for the Phytium FT2004 SoC
2019-10-14 10:01 UTC (2+ messages)
[U-Boot] [PATCH] rockchip: rk3399: defconfig: no need to reserve IRAM for SPL
2019-10-14 9:56 UTC (2+ messages)
` [U-Boot] [PATCH] rockchip: rk3399: defconfig: no need to reserve IRAM for SPL【请注意，邮件由kever.yang@gmail.com代发】
[U-Boot] [PATCH v2 1/2] rockchip: make_fit_atf.py: allow inclusion of a tee binary
2019-10-14 9:55 UTC (6+ messages)
` [U-Boot] [PATCH v2 2/2] common: spl: atf: support booting bl32 image
` [U-Boot] [PATCH v2 2/2] common: spl: atf: support booting bl32 image【请注意，邮件由u-boot-bounces@lists.denx.de代发】 image
` [U-Boot] [PATCH v2 1/2] rockchip: make_fit_atf.py: allow inclusion of a tee binary【请注意，邮件由u-boot-bounces@lists.denx.de代发】
[U-Boot] [PATCH 0/1] rk3328: clk: Configure CPU clock during initialization
2019-10-14 9:54 UTC (4+ messages)
` [U-Boot] [PATCH 1/1] clk: rockchip: rk3328: Configure CPU clock
` [U-Boot] [PATCH 1/1] clk: rockchip: rk3328: Configure CPU clock【请注意，邮件由u-boot-bounces@lists.denx.de代发】
[U-Boot] [PATCH] rockchip: dts: rk3328: rock64: Add same-as-spl order
2019-10-14 9:54 UTC (3+ messages)
` [U-Boot] [PATCH] rockchip: dts: rk3328: rock64: Add same-as-spl order【请注意，邮件由u-boot-bounces@lists.denx.de代发】 order
[U-Boot] Using MinGW gcc cross-compiling host tools for Windows broken
2019-10-14 9:46 UTC
[U-Boot] [PATCH] ARM: zynq: Add missing pl353-smc node
2019-10-14 9:30 UTC
[U-Boot] [PATCH v2] pci: add DM based mpc85xx driver
2019-10-14 9:29 UTC
[U-Boot] [PATCH] ARM: zynq: Move BOOTM_NETBSD to Kconfig
2019-10-14 9:26 UTC
[U-Boot] [PATCH v3] ata: ahci allow 64-bit DMA for SATA
2019-10-14 9:21 UTC
[U-Boot] [PATCH v2] rockchip: rk3399: Add Leez P710 support
2019-10-14 9:09 UTC (3+ messages)
` [U-Boot] [PATCH v2] rockchip: rk3399: Add Leez P710 support【请注意，邮件由u-boot-bounces@lists.denx.de代发】
[U-Boot] [PATCH v4 0/6] power: pmic: support more PMIC
2019-10-14 9:08 UTC (2+ messages)
[U-Boot] [PATCH 0/3] gpio: zynq: Add support for Versal
2019-10-14 9:05 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] gpio: zynq: Add gpio driver "
` [U-Boot] [PATCH 2/3] gpio: zynq: Add gpio driver support for PMC gpio
` [U-Boot] [PATCH 3/3] arm64: versal: Enable GPIO command for Versal
[U-Boot] [PATCH 1/2] rockchip: make_fit_atf.py: allow inclusion of a tee binary
2019-10-14 9:03 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] common: spl: atf: support booting bl32 image
[U-Boot] [PATCH] rockchip: rk3399: rock960: Update config for TPL
2019-10-14 8:58 UTC (2+ messages)
[U-Boot] [PATCH] pci: layerscape: remove multiple definitions of SVR
2019-10-14 8:56 UTC
[U-Boot] [PATCH 00/10] power: Add AVS class 0 support for AM6
2019-10-14 8:41 UTC (11+ messages)
` [U-Boot] [PATCH 01/10] power: add driver for K3 Adaptive Voltage Scaling Class 0
` [U-Boot] [PATCH 02/10] arm: mach-k3: am6_init: Initialize AVS class 0
` [U-Boot] [PATCH 03/10] clk: clk-ti-sci: Notify AVS driver upon setting clock rate
` [U-Boot] [PATCH 04/10] power: regulator: tps6236x: add support for tps6236x regulators
` [U-Boot] [PATCH 05/10] arm: dts: k3-am65: Add VTM node
` [U-Boot] [PATCH 06/10] arm: dts: k3-am654-r5-base-board: enable wkup_i2c0 driver for spl
` [U-Boot] [PATCH 07/10] arm: dts: k3-am654-r5-base-board: add supply rail for MPU
` [U-Boot] [PATCH 08/10] arm: dts: k3-am654-r5-base-board: enable wkup_vtm0 node and link in supplies
` [U-Boot] [PATCH 09/10] configs: am65x_evm_r5_defconfig: Enable TPS62363 regulator support
` [U-Boot] [PATCH 10/10] configs: am65x_evm_r5_defconfig: Enable AVS class 0 support
[U-Boot] [PATCH] armv7: Support running at address other than linked to
2019-10-14 8:38 UTC
[U-Boot] [PATCH] configs: apalis-tk1: Do not define CONFIG_SYS_BOOT_RAMDISK_HIGH again
2019-10-14 8:34 UTC (3+ messages)
[U-Boot] [RESEND PATCH 0/5] usb: host: dwc2: use driver model for PHY and CLOCK
2019-10-14 8:00 UTC (6+ messages)
` [U-Boot] [RESEND PATCH 1/5] usb: host: dwc2: add phy support
` [U-Boot] [RESEND PATCH 2/5] usb: host: dwc2: add support for clk
` [U-Boot] [RESEND PATCH 3/5] usb: host: dwc2: force reset assert
` [U-Boot] [RESEND PATCH 4/5] usb: host: dwc2: add usb33d supply support for stm32mp1
` [U-Boot] [RESEND PATCH 5/5] usb: host: dwc2: add trace to have clean usb start
[U-Boot] [PATCH v3 00/15] dfu: update dfu stack and add MTD backend
2019-10-14 7:28 UTC (16+ messages)
` [U-Boot] [PATCH v3 01/15] dfu: cosmetic: cleanup sf to avoid checkpatch error
` [U-Boot] [PATCH v3 02/15] doc: dfu: Add dfu documentation
` [U-Boot] [PATCH v3 03/15] dfu: sf: add partition support for nor backend
` [U-Boot] [PATCH v3 04/15] dfu: prepare the support of multiple interface
` [U-Boot] [PATCH v3 05/15] dfu: allow to manage DFU on several devices
` [U-Boot] [PATCH v3 06/15] dfu: allow read with no data without error for EOF indication
` [U-Boot] [PATCH v3 07/15] dfu: add backend for MTD device
` [U-Boot] [PATCH v3 08/15] dfu: add partition support for MTD backend
` [U-Boot] [PATCH v3 09/15] dfu: add DFU virtual backend
` [U-Boot] [PATCH v3 10/15] dfu: add callback for flush and initiated operation
` [U-Boot] [PATCH v3 11/15] stm32mp1: activate DFU support and command MTD
` [U-Boot] [PATCH v3 12/15] stm32mp1: activate SET_DFU_ALT_INFO
` [U-Boot] [PATCH v3 13/15] stm32mp1: configs: activate CONFIG_MTD_SPI_NAND
` [U-Boot] [PATCH v3 14/15] stm32mp1: board: add spi nand support
` [U-Boot] [PATCH v3 15/15] stm32mp1: add support for virtual partition read
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox