messages from 2022-01-29 02:06:04 to 2022-01-31 13:08:04 UTC [more...]
Please test U-Boot Allwinner F1C100s support
2022-01-31 13:07 UTC (6+ messages)
[RESEND PATCH 1/2] imx: mx6ull: fix REFTOP_VBGADJ setting
2022-01-31 13:05 UTC (4+ messages)
` [RESEND PATCH 2/2] mx6: crm_regs: drop BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ
[PATCH] image: Control FIT signature verification at runtime
2022-01-31 3:41 UTC
[PATCH] gpio: Add gpio_request_by_line_name()
2022-01-31 3:24 UTC
[PATCH 0/2] EFI: Reset system after capsule-on-disk
2022-01-31 12:38 UTC (6+ messages)
` [PATCH 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk
` [PATCH 2/2] efi_loader: Reset system after CapsuleUpdate "
[PATCH] arm: kirkwood: Dreamplug : Use Marvell uclass mvgbe and PHY driver for Ethernet
2022-01-31 12:31 UTC (3+ messages)
Please pull u-boot-marvell/master
2022-01-31 11:37 UTC
[PATCH] arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for Ethernet
2022-01-31 11:33 UTC (2+ messages)
[PATCH u-boot-marvell 00/14] Another set of kwboot improvements
2022-01-31 11:33 UTC (2+ messages)
[PATCH] arm: kirkwood: Pogoplug V4 : Use Marvel network PHY driver
2022-01-31 11:32 UTC (2+ messages)
[PATCH v5 0/3] arm: kirkwood: Add support for Pogoplug V4
2022-01-31 11:32 UTC (2+ messages)
[PATCH] arm: mvebu: Espressobin: Fix URLs in comments
2022-01-31 11:31 UTC (2+ messages)
[PATCH 1/2] powerpc: mpc8xx: drop CONFIG_SYS_RESET_ADDRESS
2022-01-31 10:40 UTC (5+ messages)
` [PATCH 2/2] common: drop CONFIG_SYS_RESET_ADDR
[PATCH v3 00/31] Initial implementation of standard boot
2022-01-31 9:44 UTC (9+ messages)
` [PATCH v3 03/31] str: Fix a few bugs in trailing_strtoln()
` [PATCH v3 30/31] bootstd: doc: Add documentation
[PATCH 1/2] phy: zynqmp: Add support for sata and DP phy initialization
2022-01-31 9:44 UTC (3+ messages)
` [PATCH 2/2] scsi: ceva: Enable PHY and reset support
Early debug UART not working on AM33XX SoC
2022-01-31 9:43 UTC (5+ messages)
[PATCH] ARM: dts: stm32: Add USB OTG pinctrl and regulator nodes into SPL DT on DHCOR
2022-01-31 8:22 UTC (2+ messages)
RE:Re: [PATCH 1/2] fsl-layerscape: add dtb overlay feature
2022-01-31 8:07 UTC (3+ messages)
` "
` [EXT] "
[PATCH 00/10] board: sl28: add sl28cpld support and board cleanups
2022-01-31 7:51 UTC (2+ messages)
[PATCH 1/1] lib: allow printing RISC-V EFI Boot Protocol GUID
2022-01-31 6:18 UTC (5+ messages)
[PATCH v10 00/14] Add CAAM driver model support
2022-01-31 6:01 UTC (2+ messages)
[PATCH 0/4] Zynq qspi updates
2022-01-31 5:22 UTC (5+ messages)
` [PATCH 1/4] spi: zynq_qspi: Typecast rxbuf properly
` [PATCH 2/4] spi: zynq_qspi: Read only one byte at a time from txbuf
` [PATCH 3/4] spi: zynq_qspi: Add a check for baudrate and set default if not in limits
` [PATCH 4/4] spi: zynq_qspi: Add SPI memory operations to zynq qspi
[PATCH] spl: ymodem: Fix buffer overflow during Image copy
2022-01-31 4:19 UTC
[PATCH v2 0/5] DFU: Update dfu_alt_info parser etc
2022-01-31 2:52 UTC (6+ messages)
` [PATCH v2 1/5] DFU: Do not copy the entity name over the buffer size
` [PATCH v2 2/5] DFU: Accept redundant spaces and tabs in dfu_alt_info
` [PATCH v2 3/5] DFU: Check the number of arguments and argument string strictly
` [PATCH v2 4/5] doc: usage: DFU: Fix dfu_alt_info document
` [PATCH v2 5/5] cmd/dfu: Enable 'dfu list' command without DFU_OVER_USB
Pull request: u-boot-sunxi/master for 2022.04
2022-01-31 2:27 UTC (2+ messages)
[PATCH 0/5] DFU: Update dfu_alt_info parser etc
2022-01-31 0:05 UTC (4+ messages)
` [PATCH 5/5] cmd/dfu: Enable 'dfu list' command without DFU_OVER_USB
[PATCH] binman: Skip node generation for images read from files
2022-01-30 23:19 UTC (2+ messages)
[PATCH v2 1/2] Makefile: Create a file to indicate the config
2022-01-30 23:14 UTC (4+ messages)
` [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR
[PATCH] dm: Use parenthesis for the device_get_ops macro argument
2022-01-30 23:14 UTC (2+ messages)
[PATCH v1 0/5] Move board specific files to board directory
2022-01-30 23:14 UTC (11+ messages)
` [PATCH v1 3/5] scripts: Makefile.autoconf: allow CONFIG_SYS_CONFIG_NAME file to live in "
[PATCH] moveconfig: Fix code relying on now-stripped newline characters
2022-01-30 23:14 UTC (4+ messages)
[PATCH 0/2] sunxi: Fix two H616 DRAM bugs
2022-01-30 22:20 UTC (5+ messages)
` [PATCH 1/2] sunxi: fix H616 DRAM ODT support
` [PATCH 2/2] sunxi: Fix H616 DRAM read calibration for dual rank
[PATCH 0/3] sunxi: H6/H616: PRCM updates
2022-01-30 16:29 UTC (5+ messages)
` [PATCH 1/3] sunxi: prcm: Add a few registers
` [PATCH 2/3] sunxi: clock: H6/H616: Add resistor calibration
` [PATCH 3/3] sunxi: clock: H6: Adjust PLL LDO before clock setup
[PATCH] arm: dts: imx8mq-pinfunc: add a define for the SION bit
2022-01-30 13:12 UTC (4+ messages)
[PATCH] [v2] add kaslr-seed generation to extlinux.conf
2022-01-30 11:38 UTC (2+ messages)
[PATCH 1/2] clk: imx: select [SPL_]CLK_COMPOSITE_CCF for imxrt10{20|50}
2022-01-30 11:29 UTC (4+ messages)
` [PATCH 2/2] configs/*imxrt10*: remove [SPL_]CLK_COMPOSITE_CCF
[PATCH 0/2] get sdm845 boards u-boot usable as a secondary bootloader
2022-01-30 10:43 UTC (4+ messages)
` [PATCH 2/2] board: starqltechn: get board usable - fix defconfig and strip config options
[PATCH 0/3] save prev bootloader data, when u-boot chainloaded
2022-01-30 10:40 UTC (4+ messages)
` [PATCH 1/3 v2] arm: init: save previous bootloader data
` [PATCH 2/3 v2] board: starqltechn: get board usable - add bootcmd and docs
` [PATCH 3/3 v2] board: axy17lte: "
[PATCH 1/2] clk: imx: select [SPL_]CLK_COMPOSITE_CCF for imx8mn
2022-01-30 6:37 UTC (2+ messages)
` [PATCH 2/2] configs/*imx8mn*: remove [SPL_]CLK_COMPOSITE_CCF
[PATCH 0/4] gpio: sunxi: Handle pin configuration flags
2022-01-30 1:18 UTC (8+ messages)
` [PATCH 2/4] sunxi: gpio: Add per-bank drive and pull setters
` [PATCH 3/4] gpio: sunxi: Implement .set_flags
[PATCH v3 00/10] Add support for SUNIV and F1C100s
2022-01-29 23:00 UTC (15+ messages)
` [PATCH v3 01/10] arm: arm926ej-s: start.S: port save_boot_params support from armv7 code
` [PATCH v3 02/10] mach-sunxi: Move timer code to mach folder
` [PATCH v3 03/10] arm: arm926ej-s: Add sunxi code
` [PATCH v3 04/10] ARM: sunxi: Add clock and uart to sunxi headers
` [PATCH v3 05/10] sunxi: Add F1C100s DRAM initial support
` [PATCH v3 06/10] sunxi: board: Add support for SUNIV
` [PATCH v3 07/10] configs: sunxi: Add common SUNIV header
` [PATCH v3 08/10] mach-sunxi: Add support for SUNIV architecture
` [PATCH v3 09/10] ARM: dts: suniv: Add device tree files and bindings for F1C100s
` [PATCH v3 10/10] configs: sunxi: Add support for Lichee Pi Nano
[PATCH v4 0/4] Fix compiler warnings for 32-bit ARM
2022-01-29 22:22 UTC (10+ messages)
` [PATCH v4 1/4] checkpatch: Support wide strings
[PATCH 1/3] efi: Add debugging to efi_set_bootdev()
2022-01-29 21:58 UTC (6+ messages)
` [PATCH 3/3] efi: Drop unnecessary calls to blk_find_device()
[PATCH v2 1/3] efi: Add debugging to efi_set_bootdev()
2022-01-29 21:58 UTC (3+ messages)
` [PATCH v2 2/3] efi: Use device_get_uclass_id() where appropriate
` [PATCH v2 3/3] efi: Drop unnecessary calls to blk_find_device()
[PATCH] acpi: Move acpi_write_tables() to a generic header
2022-01-29 21:30 UTC
[BUG] efi_loader: ESRT table not correctly built
2022-01-29 21:28 UTC
[PATCH 00/11] Add support for SUNIV and F1C100s
2022-01-29 21:23 UTC (14+ messages)
` [PATCH 09/11] sunxi: Add support for SUNIV architecture
[PATCH 00/17] patman: Convert camel case
2022-01-29 21:14 UTC (18+ messages)
` [PATCH 01/17] patman: Convert camel case in tools.py
` [PATCH 02/17] patman: Convert camel case in command.py
` [PATCH 03/17] patman: Convert camel case in checkpatch.py
` [PATCH 04/17] patman: Convert camel case in commit.py
` [PATCH 05/17] patman: Convert camel case in cros_subprocess.py
` [PATCH 06/17] patman: Convert camel case in func_test.py
` [PATCH 07/17] patman: Convert camel case in get_maintainer.py
` [PATCH 08/17] patman: Convert camel case in gitutil.py
` [PATCH 09/17] patman: Convert camel case in project.py
` [PATCH 10/17] patman: Convert camel case in test_checkpatch.py
` [PATCH 11/17] patman: Convert camel case in test_util.py
` [PATCH 12/17] patman: Convert camel case in tout.py
` [PATCH 13/17] patman: Rename Print() to Tprint()
` [PATCH 14/17] patman: Rename Color() method to build()
` [PATCH 15/17] patman: Convert camel case in terminal.py
` [PATCH 16/17] patman: Update with new pylint scores
` [PATCH 17/17] RFC: tools: Add a camel-case conversion script
[PATCH 1/1] cmd: add serial console support for the cls command
2022-01-29 20:31 UTC
[PATCH] imx: imx8mn_beacon: Fix USB booting
2022-01-29 18:59 UTC (2+ messages)
[PATCH 1/1] bootcount: fix printf() code
2022-01-29 18:49 UTC (2+ messages)
[PATCH] dfu: mtd: skip empty pages when writing page for UBI partition
2022-01-29 18:49 UTC (2+ messages)
[PATCH v4 0/1] rsa: adds rsa3072 algorithm
2022-01-29 18:49 UTC (3+ messages)
` [PATCH v4 1/1] "
[PATCH 0/1] dm: serial: Remove old drivers and add migration deadline
2022-01-29 18:49 UTC (3+ messages)
` [PATCH 1/1] dm: serial: Add a migration deadline for serial
[PATCH v4] gitlab/azure: x86: Add a coreboot test
2022-01-29 18:49 UTC (2+ messages)
[PATCH 0/4] ARM: ti: AM64x: Clean up Ethernet boot support on AM64x SK
2022-01-29 18:49 UTC (9+ messages)
` [PATCH 1/4] net: ti: am65-cpsw-nuss: Fix err msg for port bind failures
` [PATCH 2/4] ARM: dts: k3-am642-sk: Disable cpsw_port1 in SPL
` [PATCH 3/4] configs: am64xx_evm: Increase BSS max size to 16K
` [PATCH 4/4] configs: am64x_evm_r5/a53_defconfig: Enable configs required for Ethboot
[PATCH 0/4] pci: Extend 'pci' and 'pci regions' commands
2022-01-29 18:48 UTC (9+ messages)
` [PATCH 1/4] pci: Fix setting controller's last_busno
` [PATCH 2/4] pci: Extend 'pci regions' command with bus number
` [PATCH 3/4] pci: Add checks for valid cmdline arguments
` [PATCH 4/4] pci: Extend 'pci' command with bus option '*'
[PATCH v3] spl: add support for custom boot method names
2022-01-29 18:48 UTC (2+ messages)
[PATCH 1/1] efi_loader: fix device path to text protocol
2022-01-29 18:06 UTC
[PATCH 0/2] lib: fix snprintf() for UTF-16 strings
2022-01-29 17:40 UTC (3+ messages)
` [PATCH 1/2] "
` [PATCH 2/2] test: test UTF-16 truncation in sprintf()
[PATCH] Convert CONFIG_REMAKE_ELF to Kconfig
2022-01-29 15:25 UTC
[PATCH] add kaslr-seed generation to extlinux.conf
2022-01-29 15:40 UTC (3+ messages)
[PATCH 1/1] test: test field truncation in snprint()
2022-01-29 15:33 UTC
[PATCH] rockchip: Set default LNX_KRNL_IMG_TEXT_OFFSET_BASE to SYS_TEXT_BASE
2022-01-29 15:27 UTC
[PATCH] armv8: spl: Fix build with LINUX_KERNEL_IMAGE_HEADER
2022-01-29 15:27 UTC
[PATCH v2 1/1] sandbox: fix build failure with musl and SDL
2022-01-29 14:16 UTC (2+ messages)
[PATCH V4] phy: nop-phy: Enable reset-gpios support
2022-01-29 13:27 UTC
[PATCH V3] phy: nop-phy: Enable reset-gpios support
2022-01-29 12:50 UTC (2+ messages)
[PATCH] squashfs: show an error message if the inode_table can't be, allocated
2022-01-29 12:50 UTC (2+ messages)
[PATCH] pylint: Adjust how the output is produced
2022-01-29 12:50 UTC (2+ messages)
[PATCH v2 00/12] Add support for SUNIV and F1C100s
2022-01-29 11:25 UTC (19+ messages)
` [PATCH v2 03/12] arm: arm926ej-s: Add sunxi code
` [PATCH v2 04/12] dt-bindings: clock: Add initial suniv headers
` [PATCH v2 06/12] ARM: sunxi: Add clock and uart to sunxi headers
` [PATCH v2 09/12] configs: sunxi: Add common SUNIV header
` [PATCH v2 11/12] ARM: dts: suniv: Add device tree files for F1C100s
[PATCH v1 1/1] env: fat: Allow overriding interface, device and partition
2022-01-29 8:26 UTC (3+ messages)
` "
i.MX8MN (ROMv2) fails to boot over USB
2022-01-29 4:00 UTC (10+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox