messages from 2022-12-12 02:53:47 to 2022-12-13 20:09:30 UTC [more...]
[PATCH v2] pinctrl: sunxi: Add P2WI and RSB pinmuxes
2022-12-13 20:07 UTC (2+ messages)
[PATCH v2 0/3] arch-meson: introduce efusedump command
2022-12-13 18:31 UTC (4+ messages)
` [PATCH v2 1/3] asm/arch-meson: add missing meson_sm_write_efuse signature
` [PATCH v2 2/3] arm/mach-meson: move smc commands in cmd/meson
` [PATCH v2 3/3] cmd/arm: meson: sm: introduce efusedump command
[PATCH 0/8] sunxi: Update H616 DRAM driver
2022-12-13 17:08 UTC (8+ messages)
` [PATCH 4/8] sunxi: Convert H616 DRAM options to single setting
[PATCH v2] board: ti: common: board_detect: Fix EEPROM read quirk for 2-byte
2022-12-13 16:42 UTC (2+ messages)
[PATCH] Makefile: With BINMAN_ALLOW_MISSING=1 don't error on missing
2022-12-13 16:39 UTC (6+ messages)
[PATCH] Makefile: link with --no-warn-rwx-segments
2022-12-13 16:36 UTC (2+ messages)
[PATCH 0/5] Complete the migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT
2022-12-13 16:36 UTC (3+ messages)
` [PATCH 1/5] configs: am333x_guardian: move MTDIDS_DEFAULT in defconfif
[PATCH 0/7] updates for km board series
2022-12-13 16:36 UTC (3+ messages)
` [PATCH 1/7] board/km: move ls102xa boards to environment text files
[PATCH 1/4] riscv: spl: Introduce SPL_OPENSBI_OS_BOOT
2022-12-13 16:27 UTC (13+ messages)
cmd: exit: Exit functionality broken
2022-12-13 16:06 UTC (3+ messages)
[PATCH v3 0/3] Re-Send Timer support for ARM Tegra
2022-12-13 15:56 UTC (4+ messages)
` [PATCH v3 1/3] ARM: tegra: remap clock_osc_freq for all Tegra family
` [PATCH v3 2/3] drivers: timer: add timer driver for ARMv7 based Tegra devices
` [PATCH v3 3/3] ARM: tegra: include timer as default option
[PATCH] Revert "cmd: pxe_utils: Check fdtcontroladdr in label_boot"
2022-12-13 15:38 UTC (4+ messages)
[PATCHv2 0/4] FWU: Handle meta-data in common code
2022-12-13 14:59 UTC (3+ messages)
` [PATCHv2 2/4] fwu: move meta-data management in core
[PATCH 0/3] cmd: pxe: support INITRD and FDT selection with FIT
2022-12-13 14:48 UTC (15+ messages)
` [PATCH 1/3] cmd: pxe: reorder kernel treatment in label_boot
` [PATCH 2/3] cmd: pxe: support INITRD and FDT selection with FIT
` [PATCH 3/3] cmd: pxe: use strdup to copy config
[PATCH] Revert "cmd: pxe: use strdup to copy config" et al
2022-12-13 14:37 UTC (7+ messages)
[PATCH v1] arch/arm: sm: introduce efusedump command
2022-12-13 14:06 UTC (4+ messages)
[PATCH v2] cmd: clk: probe the clock before dump them
2022-12-13 13:58 UTC (2+ messages)
[PATCH V3 0/2] spi: cqspi: Fix register reads in STIG Mode
2022-12-12 23:35 UTC (5+ messages)
` [PATCH V3 1/2] spi: cadence_qspi: setup ADDR Bits in cmd reads
` [PATCH V3 2/2] spi: cadence_qspi: use STIG mode for small reads
[PATCH V2 1/1] Configs: enable gigadevice xilinx_zynqmp_mini_qspi_defconfig
2022-12-13 10:00 UTC (6+ messages)
[PATCH v2] net: eth-uclass: revalidate priv after stop() in eth_halt()
2022-12-13 11:01 UTC (5+ messages)
` [PATCH] usb: gadget: ether: split start/stop from init/halt
[PATCH] serial: ns16550: Enable clocks during probe
2022-12-13 10:40 UTC (5+ messages)
[PATCH] configs: phycore-rk3288: Enable CONFIG_LTO
2022-12-13 10:38 UTC
[PATCH v2] serial: ns16550: Enable clocks during probe
2022-12-13 9:06 UTC (2+ messages)
[PATCH 0/2] musb-new: fix omap peripheral support
2022-12-13 8:30 UTC (6+ messages)
` [PATCH 1/2] omap4: make musb probeable by simple bus
` [PATCH 2/2] musb-new: omap2430: fix musb probing in gadget mode
[PATCH 1/2] pmic: pca9450: Make warm reset on WDOG_B assertion
2022-12-13 7:44 UTC (4+ messages)
` [PATCH 2/2] ARM: imx: Remove PMIC reset configuration from board files
[PATCH 1/2] ARM: imx: bootaux: Fix macro misuse
2022-12-13 7:41 UTC (4+ messages)
` [PATCH 2/2] ARM: imx: bootaux: Fix LTO -Wlto-type-mismatch
[PATCH v5 0/3] Support UEFI SPI I/O protocol
2022-12-13 7:15 UTC (5+ messages)
` [PATCH v5 1/3] efi_loader: Add SPI I/O protocol support
[PATCH] serial: Do not write additional \r before \n for dm_serial drivers
2022-12-13 5:58 UTC (3+ messages)
[PATCH 0/1] cmd: change the return value when argc error
2022-12-13 5:58 UTC (3+ messages)
` [PATCH 1/1] "
[PATCH v1] imx8: scu_api: sync sc_rm_is_pad_owned api change
2022-12-13 4:08 UTC
[PATCH v1] net: nuvoton: fix build broken for use phy_get_interface_by_name
2022-12-13 3:13 UTC (8+ messages)
Converting to DM SERIAL for Kirkwood boards
2022-12-13 1:18 UTC (3+ messages)
[PATCH] tpm2: ftpm: open session with privileged ree login
2022-12-12 22:26 UTC (2+ messages)
[PATCH] drivers: pci: pcie_dw_common: add upper-limit to iATU
2022-12-12 21:35 UTC (2+ messages)
[PATCH] configs: set CONFIG_LMB_MAX_REGIONS=64 for all mt798[16] boards
2022-12-12 21:35 UTC (2+ messages)
[PATCH] arm: mach-omap2: Move common image process functions out of board files
2022-12-12 21:35 UTC (2+ messages)
[PATCH v1] ARM: dts: npcm7xx: add npcm750 gpio node compatible name
2022-12-12 21:35 UTC (2+ messages)
[PATCH v1 0/2]add npcm845 function config and dts node
2022-12-12 21:35 UTC (5+ messages)
` [PATCH v1 1/2] ARM: config: enable function for nuvoton npcm845 bmc
` [PATCH v1 2/2] ARM: dts: npcm8xx: add npcm845 function node
[PATCH] distro/pxeboot: Handle prompt variable
2022-12-12 21:35 UTC (4+ messages)
` AW: "
[PATCH] net: Fix memory corruption in eth_halt() if the stop handler frees the priv member
2022-12-12 21:19 UTC (2+ messages)
[PATCH v4 0/5] cmd: source: Support specifying config name
2022-12-12 19:14 UTC (7+ messages)
` [PATCH v4 1/5] image: Add fallback for fit_config_verify
` [PATCH v4 2/5] test: Add test for source command
` [PATCH v4 3/5] treewide: Use NULL for script image name
` [PATCH v4 4/5] cmd: source: Clean up a few lines
` [PATCH v4 5/5] cmd: source: Support specifying config name
[PATCH 1/2] arm: mediatek: add mt8195 SOC support
2022-12-12 19:02 UTC (6+ messages)
` [PATCH v3 "
` [PATCH v3 2/2] board: mediatek: add mt8195 demo board
[PATCH v3 0/4] cmd: source: Support specifying config name
2022-12-12 16:46 UTC (3+ messages)
` [PATCH v3 4/4] "
[PATCH] mtd: spi-nor-ids: add Macronix flash entry
2022-12-12 15:58 UTC (2+ messages)
Please pull u-boot-marvell/master
2022-12-12 15:43 UTC (2+ messages)
[PULL] Pull request for u-boot master / v2023.01-rc4 = u-boot-stm32-20221212
2022-12-12 15:43 UTC (2+ messages)
[PATCH V2 1/1] Configs: enable gigadevice
2022-12-12 13:05 UTC
[PATCH 0/3] Add support for USB onboard HUB, used on stm32 boards
2022-12-12 13:19 UTC (8+ messages)
` [PATCH 1/3] usb: onboard-hub: add driver to manage onboard hub supplies
` [PATCH 2/3] configs: stm32: enable USB onboard HUB driver
` [PATCH 3/3] ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp157c-ev1
[PATCH] ARM: dts: stm32: update vbus-supply of usbphyc_port0 on stm32mp157c-ev1
2022-12-12 10:44 UTC (2+ messages)
[PATCH v3 00/19] Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards
2022-12-12 14:31 UTC (21+ messages)
` [PATCH v3 01/19] ARM: dts: sam9x60: Add OHCI and EHCI DT nodes
` [PATCH v3 02/19] clk: at91: Add support for sam9x60 USB clock
` [PATCH v3 03/19] clk: at91: sam9x60: Register the required clocks for USB
` [PATCH v3 04/19] clk: at91: pmc: export clock setup to pmc
` [PATCH v3 05/19] clk: at91: sam9x60: Add initial setup of UPLL and USBCK rates
` [PATCH v3 06/19] usb: ohci-at91: Enable OHCI functionality and register into DM
` [PATCH v3 07/19] dt-bindings: reset: add sama7g5 definitions
` [PATCH v3 08/19] dt-bindings: clk: at91: Define additional UTMI related clocks
` [PATCH v3 09/19] ARM: dts: at91: sama7: Add USB related DT nodes
` [PATCH v3 10/19] ARM: at91: add sama7 SFR definitions
` [PATCH v3 11/19] reset: at91: Add reset driver for basic assert/deassert operations
` [PATCH v3 12/19] phy: at91: Add support for the USB 2.0 PHY's of SAMA7
` [PATCH v3 13/19] usb: ohci-at91: Add USB PHY functionality
` [PATCH v3 14/19] ARM: dts: at91: sama5d2_icp: Add pinctrl nodes for USB related DT nodes
` [PATCH v3 15/19] ARM: dts: at91: sama5d27_wlsom1_ek: Add pinctrl nodes for USB "
` [PATCH v3 16/19] configs: at91: sam9x60ek: Add required configs for the USB command
` [PATCH v3 17/19] configs: at91: sama5d2: Enable OHCI/EHCI related configs
` [PATCH v3 18/19] configs: at91: sama7: Enable USB and RESET functionality
` [PATCH v3 19/19] usb: ohci-at91: Add `ohci_t` field in `ohci_at91_priv`
[PATCH] arm64: zynqmp: Remove unused snps,refclk_fladj property
2022-12-12 14:27 UTC
[PATCH 1/1] net: missing break after net_ip6_handler()
2022-12-12 14:19 UTC (4+ messages)
[PATCH 1/2] arm64: zynqmp: Describe TI phy as ethernet phy ID on ZCU102 RevB & up
2022-12-12 14:14 UTC (2+ messages)
` [PATCH 2/2] arm64: zynqmp: Enable TI phy reset via GPIO
[PATCH] arm64: zynqmp: Remove unused USB DT properties
2022-12-12 14:06 UTC
[PATCH v5 0/1] Makefile: rework u-boot-initial-env target
2022-12-12 14:00 UTC (5+ messages)
` [PATCH v5 1/1] u-boot-initial-env: rework make target
[u-boot][PATCH 00/14] rawnand: omap_gpmc: driver model support
2022-12-12 13:58 UTC (9+ messages)
USB Device buffer overflow
2022-12-12 13:24 UTC (9+ messages)
` [PATCH] Prevent buffer overflow on USB control endpoint
[PATCH] phy: usbphyc: use regulator_set_enable_if_allowed for disabling vbus supply
2022-12-12 10:48 UTC (3+ messages)
` [Uboot-stm32] "
[PATCH] dm: pmic: ignore disabled node in pmic_bind_children
2022-12-12 10:48 UTC (3+ messages)
` [Uboot-stm32] "
[PATCH v2 00/19] Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards
2022-12-12 10:43 UTC (5+ messages)
` [PATCH v2 02/19] clk: at91: Add support for sam9x60 USB clock
` [PATCH v2 12/19] reset: at91: Add reset driver for basic assert/deassert operations
[PATCH] cmd: mtdparts: add SYS_MTDPARTS_RUNTIME dependency on CONFIG_MTDIDS/MTDPARTS_DEFAULT
2022-12-12 10:17 UTC (2+ messages)
` [Uboot-stm32] "
[PATCH] ARM: dts: at91: sama5d2: fix wrong interrupt-cells property
2022-12-12 10:07 UTC (2+ messages)
[PATCH v2 1/4] ARM: stm32: Fix ECDSA authentication with Dcache enabled
2022-12-12 9:40 UTC (4+ messages)
[PATCH v3 1/4] ARM: stm32: Fix ECDSA authentication with Dcache enabled
2022-12-12 9:18 UTC (6+ messages)
` [PATCH v3 2/4] ARM: stm32: Factor out save_boot_params
` [PATCH v3 3/4] ARM: stm32: Pass ROM API table pointer to U-Boot proper
[PATCH v3 1/1] arm: mvebu: Espressobin: Fix default env variables
2022-12-12 8:28 UTC (2+ messages)
[PATCH] patch V2: SPI NOR: ZynqMP: Zynq: GD25Q512: adding part # to the list
2022-12-12 8:12 UTC (2+ messages)
[PATCH] common: spl: ram: fix return code
2022-12-12 8:06 UTC (2+ messages)
[PATCH] patch V2: SPI: NOR: ZynqMp: enabling gigadevice part #
2022-12-12 8:01 UTC (2+ messages)
[PATCH] SPI NOR: versal_virt: enabling gigadevice part #s
2022-12-12 8:00 UTC (2+ messages)
[PATCH] patch: SPI NOR: versal_net_virt: Enabling gigadevice parts
2022-12-12 8:00 UTC (2+ messages)
[PATCH] SPI NOR: zynq_virt: enabling Gigadevice part # in zynq virt config file
2022-12-12 7:59 UTC (2+ messages)
[PATCH] patch: SPI: NOR: zynqmp_virt: enabling Gigadevice part #
2022-12-12 7:58 UTC (2+ messages)
[PATCH] patch v2: SPI NOR: zynqmp: zynq: gd55lx02g
2022-12-12 7:55 UTC (2+ messages)
[PATCH v1 00/17] Basic StarFive JH7110 RISC-V SoC support
2022-12-12 2:50 UTC (5+ messages)
` [PATCH v1 14/17] riscv: dts: jh7110: Add initial StarFive JH7110 device tree
` [PATCH v1 15/17] riscv: dts: jh7110: Add initial u-boot "
` [PATCH v1 16/17] riscv: dts: jh7110: Add initial StarFive VisionFive v2 board "
` [PATCH v1 17/17] configs: starfive: add starfive_visionfive2_defconfig
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox