messages from 2025-09-04 01:57:11 to 2025-09-08 14:21:47 UTC [more...]
LWIP buffer alignment
2025-09-08 14:21 UTC (2+ messages)
[PATCH -next v6 0/9] Add support for dynamic MMU configuration
2025-09-08 14:20 UTC (12+ messages)
` [PATCH -next v6 01/10] mach-k3: use minimal memory map for all K3
` [PATCH -next v6 02/10] mach-k3: use custom enable_cache
` [PATCH -next v6 03/10] arm: armv8: mmu: export mmu_setup
` [PATCH -next v6 04/10] arm: armv8: invalidate dcache entries on dcache_enable
` [PATCH -next v6 05/10] arm: armv8: mmu: add mem_map_fix_dram_banks
` [PATCH -next v6 06/10] mach-k3: map all banks using mem_map_fix_dram_banks
` [PATCH -next v6 07/10] arm: armv8: mmu: add mmu_unmap_reserved_mem
` [PATCH -next v6 08/10] spl: split spl_board_fixups to arch/board specific
` [PATCH -next v6 09/10] mach-k3: add reserved memory fixups for next boot stage
` [PATCH -next v6 10/10] mach-k3: add carveouts for TFA and optee
[PATCH] Fix detection of odd memory configurations on sunxi
2025-09-08 14:11 UTC (4+ messages)
` "
[PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed
2025-09-08 13:55 UTC (4+ messages)
[PATCH] boot: Increase kernel size limit to 128 MiB on ARM64/PPC/RV
2025-09-08 13:48 UTC
[PATCH 0/4] Enable USB 3.1 for Agilex5 SoCFPGA
2025-09-08 13:41 UTC (11+ messages)
` [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5
[PATCH] thermal: Convert .get_temp() return value to millicelsius
2025-09-08 13:09 UTC (4+ messages)
[PATCH 0/6] usb: host: ehci-msm: Clean up and fix crashes
2025-09-08 11:47 UTC (3+ messages)
[PATCH] board: rockchip: add Lunzn FastRhino R66S
2025-09-08 11:32 UTC
[PATCH v2 0/6] Fix UART autoboot issues on DragonBoard 410c
2025-09-08 11:31 UTC (7+ messages)
` [PATCH v2 1/6] board: dragonboard410c: Drop now unneeded bootph-all for console
` [PATCH v2 2/6] Revert "serial: serial_msm: Delay initialization to let pins stabilize"
` [PATCH v2 3/6] serial: msm: Cleanup register naming
` [PATCH v2 4/6] serial: msm: Reset after writing to DMEN
` [PATCH v2 5/6] serial: msm: Re-enable after resetting
` [PATCH v2 6/6] serial: msm: Use single character mode
[PATCH] net: ti: am65-cpsw-nuss: invoke phy_config() in driver's .start callback
2025-09-08 11:06 UTC (4+ messages)
[RFC PATCH v1 00/20] Introduce support for Raspberry PI 5
2025-09-08 9:36 UTC (3+ messages)
[PATCH] doc: add README.pmic guide for PMIC/regulator framework
2025-09-08 9:01 UTC (2+ messages)
[PATCH v4 0/5] Add support for MediaTek MT7987/MT7988 built-in 2.5Gb ethernet PHY (v4)
2025-09-08 8:34 UTC (6+ messages)
` [PATCH v4 1/5] misc: fs_loader: allow returning actual firmware data size in request_firmware_into_buf_via_script()
` [PATCH v4 2/5] misc: fs_loader: allow using long script name "
` [PATCH v4 3/5] net: mediatek: associate PHY device with dts node specified by phy-handle
` [PATCH v4 4/5] net: phy: Add MediaTek built-in 2.5Gb ethernet PHY driver
` [PATCH v4 5/5] MAINTAINERS: update ethernet-related file list for MediaTek ARM platform
[PATCH v3 0/3] PHYTEC imx8m boards: enable OP-TEE as default
2025-09-08 8:28 UTC (6+ messages)
` [PATCH v3 1/3] phytec-imx8m boards: enable OP-TEE for KASLR
` [PATCH v3 2/3] doc: phytec: update imx8m docs for optee builds
` [PATCH v3 3/3] doc: phytec: imx8m: Style and firmware update
[PATCH RFC 0/9] initial U-Boot SPL support on Amlogic GX SoCs
2025-09-08 8:27 UTC (16+ messages)
` [PATCH RFC 1/9] tools: mkimage: Add Amlogic Boot Image type
` [PATCH RFC 2/9] mmc: meson_gx_mmc: add minimal non-DM driver
` [PATCH RFC 3/9] mmc: meson_gx_mmc: don't bail if there is no clock driver
` [PATCH RFC 4/9] serial: serial_meson: add minimal non-DM driver
` [PATCH RFC 5/9] arm: meson: initial u-boot SPL support for GX SoCs
` [PATCH RFC 6/9] arm: meson: spl: add support for SPL DRAM init
` [PATCH RFC 7/9] arm: dts: meson-gx-u-boot: add binman configuration for U-Boot SPL
` [PATCH RFC 8/9] board: amlogic: add kconfig fragments for SPL
` [PATCH RFC 9/9] doc: board: amlogic: add u-boot-spl documentation
[PATCH v1] doc: board: ti: am335x_evm: Add documentation
2025-09-08 5:54 UTC (2+ messages)
[PATCH] phy: Reset init count on phy exit failure
2025-09-08 7:09 UTC (4+ messages)
[PATCH] clk: stm32: Pass udevice pointer to clk_register_composite()
2025-09-08 7:02 UTC (2+ messages)
[PATCH v5] disk: efi_loader: Improve disk image detection in efi_bootmgr
2025-09-08 6:15 UTC (2+ messages)
[PATCH v4 0/2] Restore support for i.MX95 A0 silicon
2025-09-08 3:40 UTC (4+ messages)
` [PATCH v4 1/2] binman: add a new entry type to support .bin file generation for the i.MX95 platform
` 回复: "
[PULL] u-boot-sh/master
2025-09-07 20:21 UTC
[PATCH] serial: sh: Handle HSCIF RX FIFO overflow
2025-09-07 19:16 UTC
[PATCH 1/2] board: dhelectronics: Check pointer before access in dh_get_value_from_eeprom_buffer()
2025-09-07 1:00 UTC (2+ messages)
` [PATCH 2/2] board: dhelectronics: Use isascii() before isprint() in dh_read_eeprom_id_page()
[PATCH] net: dwc_eth_qos: Fix support for stm32mp2 platform
2025-09-06 23:02 UTC
[PATCH] cmd: terminal: avoid serial_reinit_all() with DM_SERIAL enabled
2025-09-06 7:30 UTC (2+ messages)
[PATCH 1/2] thermal: rcar_gen3: Add Renesas R-Car Gen3/Gen4 and RZ/G2 thermal driver
2025-09-06 0:04 UTC (2+ messages)
` [PATCH 2/2] arm64: renesas: Enable thermal driver on R-Car Gen3 and Gen4
[PATCH] thermal: Sort the Makefile
2025-09-06 0:01 UTC
[PATCH] thermal: sandbox: Staticize sandbox_thermal_get_temp()
2025-09-06 0:00 UTC
No console output on Raspberry Pi Compute Module 5
2025-09-05 23:20 UTC (3+ messages)
[PATCH] configs: Fix crash on coreboot x86
2025-09-05 23:11 UTC (2+ messages)
[PATCH 0/7] doc: make pdfdocs: Address issues with the make pdfdocs target
2025-09-05 23:09 UTC (9+ messages)
` [PATCH 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files
[PATCH 0/3] cmd: mtd: improvements
2025-09-05 22:27 UTC (6+ messages)
` [PATCH 1/3] cmd: mtd: add markbad command support
` [PATCH 2/3] cmd: mtd: add nand_write_test "
` [PATCH 3/3] cmd: mtd: add nand_read_test "
[PATCH 2/2] ti: Do not remove ft_board_setup for CONFIG_NO_NET
2025-09-05 21:43 UTC (6+ messages)
[PATCH v3 0/4] Modernize U-Boot code formatting with clang-format
2025-09-05 20:53 UTC (5+ messages)
` [PATCH v3 1/4] clang-format: Add configuration file
` [PATCH v3 2/4] tools: zynqmp_psu_init_minimize.sh: Switch to clang-format
` [PATCH v3 3/4] Lindent: Remove wrapper around indent tool
` [PATCH v3 4/4] doc: Update U-Boot coding style guide with clang-format usage
[GIT PULL] Please pull u-boot-imx-next-20250905a
2025-09-05 20:14 UTC (2+ messages)
[PATCH v1] mach-k3: fix reading size and addr from fdt on R5
2025-09-05 19:00 UTC (2+ messages)
please pull u-boot-samsung master
2025-09-05 16:44 UTC (2+ messages)
[PATCH v3 0/5] Simplify image size checks
2025-09-05 14:22 UTC (27+ messages)
` [PATCH v3 1/5] Image size checks: Move all configs in one place
` [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently
` [PATCH v3 3/5] Image size checks: Use consistent help texts
` [PATCH v3 4/5] Image size checks: Deduplicate Makefile
` [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic
[PATCH v1] board: ti: am33xx: Fix serial_getc comparision in spl_start_uboot()
2025-09-05 13:33 UTC (5+ messages)
[PATCH 1/2] ti: Do not try to read the mac address if no NET is enabled
2025-09-05 13:14 UTC (3+ messages)
[PATCH v4] Add imx8mp-libra-fpsc board
2025-09-05 13:33 UTC (2+ messages)
[PATCH v2] imx8m[m,n,p]_evk: Add redundant environment support
2025-09-05 13:32 UTC (2+ messages)
[PATCH 1/2] configs: imx93-phycore_defconfig: Disable CONFIG_AHAB_BOOT
2025-09-05 13:32 UTC (3+ messages)
` [Upstream] "
[PATCH 00/11] Misc changes for Kontron i.MX6UL SoMs and Boards
2025-09-05 13:31 UTC (3+ messages)
` [PATCH 11/11] imx: kontron-sl-mx6ul: Switch to OF_UPSTREAM
[PATCH] arm: dts: imx93-phyboard-segin-u-boot: Clean-up already upstream nodes
2025-09-05 13:29 UTC (2+ messages)
[PATCH] tools: imx8image: Make imx8image_check_params() static
2025-09-05 13:28 UTC (2+ messages)
[PATCH v2 0/2] PHYTEC imx8m boards: enable OP-TEE as default
2025-09-05 13:12 UTC (10+ messages)
` [PATCH v2 1/2] phytec-imx8m boards: enable OP-TEE for KASLR
` [PATCH v2 2/2] doc: phytec: update imx8m docs for optee builds
[PATCH] crypto/rng: double the entropy delay interval for retry
2025-09-05 9:33 UTC
[PATCH 0/1] Add compatible for ADP5587
2025-09-05 11:25 UTC (2+ messages)
` [PATCH 1/1] gpio: adp5588: Add ADP5587 as compatible
Call for Participation: Embedded & IoT micro-conference at Linux Plumbers 2025
2025-09-05 8:27 UTC
[PATCH v3 0/5] Add support for MediaTek MT7987/MT7988 built-in 2.5Gb ethernet PHY (v3)
2025-09-05 5:35 UTC (7+ messages)
` [PATCH v3 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()
[PATCH v4] disk: efi_loader: Improve disk image detection in efi_bootmgr
2025-09-05 5:34 UTC (2+ messages)
[PATCH v2 0/4] riscv: dts: starfive: prune redundant jh7110-common overrides
2025-09-05 5:02 UTC (5+ messages)
` [PATCH v2 1/4] "
` [PATCH v2 2/4] riscv: dts: starfive: sync visionfive2 overrides with upstream Linux for-next
` [PATCH v2 3/4] riscv: dts: starfive: visionfive2 depend on SYS_CPU automatic dtsi inclusion
` [PATCH v2 4/4] riscv: dts: starfive: visionfive2 depend on SYS_CONFIG_NAME "
[PATCH] configs/coreboot_defconfig: Set X86_LOAD_FROM_32_BIT to use own GDT
2025-09-04 20:26 UTC
[PATCH v2 0/4] Modernize U-Boot code formatting with clang-format
2025-09-04 18:18 UTC (6+ messages)
` [PATCH v2 1/4] clang-format: Add configuration file
` [PATCH v2 2/4] tools: zynqmp_psu_init_minimize.sh: Switch to clang-format
[PATCH RESEND v5 0/2] cmd: mtd: fix benchmarking
2025-09-04 14:32 UTC (3+ messages)
` [PATCH RESEND v5 1/2] cmd: mtd: fix speed measurement in the speed benchmark
` [PATCH RESEND v5 2/2] cmd: mtd: add benchmark option to the help
[PATCH 0/4] Bringup of SM7150 SoC
2025-09-04 13:53 UTC (7+ messages)
` [PATCH 1/4] clk/qcom: add driver for SM7150 GCC
` [PATCH 2/4] pinctrl: qcom: add SM7150 pinctrl driver
` [PATCH 4/4] configs: qcom_defconfig: Enable SM7150 GCC and Pinctrl
[PATCH v3 0/7] Add display support for STM32MP25
2025-09-04 12:53 UTC (8+ messages)
` [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing
` [PATCH v3 2/7] video: simple_panel: add support for "panel-lvds" display
` [PATCH v3 3/7] video: stm32: STM32 driver support for LVDS
` [PATCH v3 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC
` [PATCH v3 5/7] video: stm32: ltdc: properly search the first available panel
` [PATCH v3 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot
` [PATCH v3 7/7] configs: stm32mp25: enable LVDS display support
[PATCH] clk: meson: Remove unreachable code
2025-09-04 9:57 UTC (2+ messages)
[PATCH] pwm: meson: Stop premature exit from for loop
2025-09-04 9:57 UTC (3+ messages)
[PATCH] adc: meson-saradc: uint cannot be less than zero
2025-09-04 9:57 UTC (2+ messages)
[PATCH v3] pinctrl: meson: support gpio toggle command
2025-09-04 9:57 UTC (2+ messages)
[PATCH] net: mdio: mux-meson-gxl: set reversed bit when using internal phy
2025-09-04 9:57 UTC (2+ messages)
[PATCH v2 0/7] Add display support for STM32MP25
2025-09-04 8:42 UTC (16+ messages)
` [PATCH v2 1/7] ofnode: support panel-timings in ofnode_decode_display_timing
` [PATCH v2 2/7] video: simple_panel: add support for "panel-lvds" display
` [PATCH v2 3/7] video: stm32: STM32 driver support for LVDS
` [PATCH v2 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC
` [PATCH v2 5/7] video: stm32: ltdc: properly search the first available panel
` [PATCH v2 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot
` [PATCH v2 7/7] configs: stm32mp25: enable LVDS display support
[RFC 00/10] Add support for StarFive VisionFive 2 Lite board
2025-09-04 2:39 UTC (5+ messages)
` [RFC 02/10] riscv: dts: starfive: Add VisionFive 2 Lite board device tree
[PATCH 0/2] Fix ADI driver header dependencies
2025-09-04 1:57 UTC (3+ messages)
` [PATCH 2/2] mmc: adi_sdhci: Update headers
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox