public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
 messages from 2026-03-25 13:25:57 to 2026-03-27 12:53:42 UTC [more...]

[PATCH 0/4] Add TPM2 support for AMD Versal Gen 2
 2026-03-27 12:52 UTC 

[PATCH v2 1/2] kbuild: Move U-Boot .incbin rules to Makefile.lib-u-boot
 2026-03-27 12:44 UTC  (6+ messages)
` [PATCH v2 2/2] kbuild: Use relative paths in generated .incbin directives

[PATCH v1 0/3] Relocate U-Boot in the last bank
 2026-03-27 12:23 UTC  (8+ messages)
` [PATCH v1 1/3] fdtdec: Deduplicate iterator function
` [PATCH v1 2/3] fdtdec: Introduce fdtdec_setup_mem_ram_top() to determine end of topmost DRAM bank
` [PATCH v1 3/3] common: Allow relocations on the top of the last bank

[PATCH 0/3] Add PCIe and NVMe support for AMD Versal Gen 2
 2026-03-27 12:10 UTC  (4+ messages)
` [PATCH 1/3] pci: Add AMD Versal2 DW PCIe host controller driver
` [PATCH 2/3] arm: versal2: Map PCIe DBI and config regions when PCIe is enabled
` [PATCH 3/3] amd: versal2: Enable PCIe/NVMe support and add NVMe boot target

[PATCH 0/2] u-boot: pinctrl: scmi: Use standard pin muxing format
 2026-03-27 11:45 UTC  (5+ messages)
` [PATCH 1/2] firmware: scmi: Fix setting the function
` [PATCH 2/2] pinctrl: scmi: Use standard device tree pin muxing format

Pull request doc-2026-04-rc6
 2026-03-27 11:19 UTC 

[PATCH] clk: versal: Fix out-of-bounds parent id for DUMMY_PARENT
 2026-03-27 10:10 UTC 

[PATCH v3 00/16] Add board support for Spacemit K1 SoC in SPL
 2026-03-27  9:32 UTC  (22+ messages)
` [PATCH v3 01/16] spacemit: k1: support multi-board infrastructure
` [PATCH v3 02/16] spacemit: k1: enable SPL with debug UART
` [PATCH v3 03/16] configs: k1: enable early timer support
` [PATCH v3 04/16] reset: k1: remove TWSI8 reset restriction
` [PATCH v3 05/16] dt-bindings: clock: import k1-syscon from upstream
` [PATCH v3 06/16] dts: k1: import dts file from upstream folder
` [PATCH v3 07/16] clk: spacemit: Add support for K1 SoC
` [PATCH v3 08/16] dts: k1: enable clocks in SPL
` [PATCH v3 09/16] board: k1: initialize clock and serial devices "
` [PATCH v3 10/16] configs: k1: add default option for clock driver "
` [PATCH v3 11/16] i2c: k1: add I2C driver support
` [PATCH v3 12/16] spacemit: k1: add TLV EEPROM support in SPL
` [PATCH v3 13/16] spacemit: k1: Add DDR firmware support to SPL
` [PATCH v3 14/16] power: pmic: add support for Spacemit P1 PMIC
` [PATCH v3 15/16] power: regulator: add support for Spacemit P1 SoC
` [PATCH v3 16/16] board: k1: enable pmic in spl
` [PATCH v2] doc: spacemit: add K1 SPL build and test guide

[PATCH 0/3] k3-am62-pocketbeagle2: add board and variant support
 2026-03-26 23:23 UTC  (8+ messages)
` [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support

[PATCH 0/6] env: scsi: support SCSI env without partition UUID
 2026-03-26 22:59 UTC  (7+ messages)
` [PATCH 1/6] env: scsi: rename ENV_SCSI_PART_UUID
` [PATCH 2/6] scsi: return ENODEV in scsi_get_blk_by_uuid()
` [PATCH 3/6] scsi: document return values of public functions
` [PATCH 4/6] scsi: move scsi_scan() call out of scsi_get_blk_by_uuid()
` [PATCH 5/6] env: scsi: add CONFIG_ENV_SCSI_HW_PARTITION
` [PATCH 6/6] env: scsi: document requirements for ENV_IS_IN_SCSI

[SECURITY][1/4] Stack buffer overflow in NanoPi2 board code (CONFIG_SYS_CBSIZE-dependent)
 2026-03-26 21:08 UTC  (2+ messages)

[PATCH] cmd/scsi: drop scsi reset command
 2026-03-26 20:39 UTC 

[PATCH] CI: Update sjg lab to match currently actively boards
 2026-03-26 19:46 UTC  (5+ messages)

[PATCH 0/7] Introduce SQUASHFS support in SPL
 2026-03-26 18:31 UTC  (2+ messages)

Pull request for fwu-next-26032026
 2026-03-26 18:31 UTC  (2+ messages)

Pull request: rpi-2026.04 rc5
 2026-03-26 16:49 UTC  (2+ messages)

[PATCH] video: simplefb: Map framebuffer region on probe on ARM64
 2026-03-26 15:18 UTC  (5+ messages)

[RFC][PATCH 1/3] fdtdec: Deduplicate iterator function
 2026-03-26 15:08 UTC  (5+ messages)
` [RFC][PATCH 2/3] fdtdec: Introduce fdtdec_setup_mem_ram_top() to determine end of topmost DRAM bank

[PATCH] board: dhelectronics: imx: Use second Ethernet MAC also from fuse
 2026-03-26 13:34 UTC  (3+ messages)

[PATCH 01/14] serial: atmel-usart: allow selecting from ARCH_MICROCHIPSW
 2026-03-26 11:26 UTC  (14+ messages)
` [PATCH 02/14] pinctrl: add Microchip LAN969x driver
` [PATCH 03/14] clk: add Microchip LAN966x and LAN969x support
` [PATCH 04/14] mmc: atmel: remove duplicate depends on ARCH_AT91
` [PATCH 05/14] mmc: atmel-sdhci: set GCK rate based on compatible
` [PATCH 06/14] mmc: atmel-sdhci: include arch specific clk.h only for AT91
` [PATCH 07/14] mmc: atmel-sdhci: add support for LAN969x
` [PATCH 08/14] i2c: at91-i2c: include arch specific clk.h only for AT91
` [PATCH 09/14] i2c: i2c-at91: allow selecting from ARCH_MICROCHIPSW
` [PATCH 10/14] usb: dwc3-generic: add support for Microchip LAN969x
` [PATCH 11/14] spi: atmel-quadspi: add Microchip LAN969x support
` [PATCH 12/14] net: add Microchip SparX-5 and "
` [PATCH 13/14] net: phy: add Microchip LAN8841 support
` [PATCH 14/14] arch: arm: add Microchip LAN969x support

[PATCH] clk: qcom: sc7280: add missing SDCC1 clocks
 2026-03-26  9:35 UTC  (3+ messages)

[PATCH] mmc: allow forward compatibility for EXT_CSD_REV
 2026-03-26  5:55 UTC 

[PATCH] kbuild: Use relative paths in generated .incbin directives
 2026-03-26 11:52 UTC  (9+ messages)

[PATCH] arm: mvebu: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-26 11:04 UTC  (2+ messages)

[PATCH] net: lwip: tftp: update image_load_addr after successful transfer
 2026-03-26 10:41 UTC 

[PATCH 0/4] i.MX8MP: Convert to DM_PMIC for a few boards
 2026-03-26 10:09 UTC  (13+ messages)
` [PATCH 1/4] imx8mp: phyboard-pollux-rdk: Convert to DM_PMIC

[PATCH] arm: bcm: Include missing errno.h
 2026-03-26  9:49 UTC  (3+ messages)

[PATCH] arm: stm32mp: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-26  9:42 UTC  (2+ messages)

[PATCH v2 0/4] u-boot: add SCMI GPIO/Pinctrl support
 2026-03-26  9:30 UTC  (4+ messages)
` [PATCH v2 3/4] scmi: pinctrl: add pinctrl driver for SCMI

[PATCH v2 00/10] TQMa6 with preparations for integrating additional TQ boards
 2026-03-26  9:21 UTC  (2+ messages)

[PATCH v3 0/8] Add support for TQMa7x
 2026-03-26  9:11 UTC  (9+ messages)
` [PATCH v3 1/8] Kconfig: update build-target for MX7 with SPL
` [PATCH v3 2/8] board/tq: Add common SoM API
` [PATCH v3 3/8] env: add env_set_runtime() helper
` [PATCH v3 4/8] arch: arm: dts: tqma7x: add u-boot device tree fragments
` [PATCH v3 5/8] arch: arm: dts: tqma7x: add boot phase properties
` [PATCH v3 6/8] board: tqma7: add code for u-boot with spl
` [PATCH v3 7/8] configs: tqma7: add defconfigs
` [PATCH v3 8/8] doc: tqma7: add documentation

[PATCH] usb: gadget: Move USB_GADGET_DUALSPEED to be slightly more visible
 2026-03-26  8:57 UTC  (3+ messages)
` [PATCH v2] "

[PATCH] dfu: Correct dependencies for DFU_TFTP
 2026-03-26  8:56 UTC  (2+ messages)

[PATCH v4 0/2] qcom: EFI PSCI runtime reset handling and config update
 2026-03-26  8:54 UTC  (2+ messages)

[PATCH v2 0/8] Add support for TQMa7x
 2026-03-26  8:18 UTC  (5+ messages)
` [PATCH v2 6/8] board: tqma7: add code for u-boot with spl

[PATCH v1] crypto: fsl: init caam_jr driver
 2026-03-26  8:12 UTC  (2+ messages)

U-Boot and legacy SPL power control on modern platforms
 2026-03-26  7:44 UTC  (5+ messages)

[PATCH] mx6ullevk: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-26  7:38 UTC  (2+ messages)

[PATCH] mx6sxsabreauto: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-26  7:38 UTC  (2+ messages)

[PATCH] mx6sllevk: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-26  7:38 UTC  (2+ messages)

[PATCH] imx8ulp_evk: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-26  7:37 UTC  (2+ messages)

[PATCH] osm-s-mx93: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-26  6:51 UTC  (2+ messages)

[PATCH 0/2] mtd: nand: raw: Cadence NAND cleanup
 2026-03-26  5:57 UTC  (5+ messages)
` [PATCH 1/2] mtd: nand: raw: Kconfig: clean up SPL Cadence NAND dependencies

[SECURITY][4/4] Stack buffer overflow in Samsung board code (sprintf concatenation)
 2026-03-26  4:41 UTC 

[SECURITY][3/4] Potential overflow in Toradex config block prompts (CONFIG_SYS_CBSIZE-dependent)
 2026-03-26  4:41 UTC 

[SECURITY][2/4] Buffer overflow in CLI boot retry path (CONFIG_SYS_CBSIZE-dependent)
 2026-03-26  4:41 UTC 

[PATCH 0/3] test/py: gpio: cleanups and improvement
 2026-03-25 23:06 UTC  (2+ messages)

[PATCH] mach-k3: move k3_falcon_fdt_fixup out of r5/common.c
 2026-03-25 23:05 UTC  (2+ messages)

[PATCH v2 0/4] add [ as alias for test, fix 0/1 argument handling
 2026-03-25 23:05 UTC  (2+ messages)

[PATCH next v3] arm: mach-k3: use Kconfig options for ATF/OPTEE size
 2026-03-25 23:05 UTC  (2+ messages)

[PATCH] fw_loader: Introduce SUPPORTS_FW_LOADER symbol
 2026-03-25 23:05 UTC  (2+ messages)

[PATCH] fdt: Prefer %pap over %llx
 2026-03-25 23:05 UTC  (2+ messages)

[PATCH] configs: adi: sc5xx: sync command configuration
 2026-03-25 23:05 UTC  (2+ messages)

[PATCH] virtio: Fix virtio initialization sequence
 2026-03-25 23:05 UTC  (3+ messages)
` [PATCH v2] "

[PATCH v2 0/2] virtio: rng: Handle oversized return buffers
 2026-03-25 23:05 UTC  (2+ messages)

[PATCH] arm: rockchip: Guard call of board_early_init_f in SPL
 2026-03-25 20:37 UTC  (6+ messages)

Please pull u-boot-tegra staging
 2026-03-25 20:32 UTC  (2+ messages)

[GIT PULL] Please pull mediatek-for-next-2026-03-24 into next
 2026-03-25 20:32 UTC  (2+ messages)

[PATCH 0/6] sunxi: add NetCube Nagami support and T113 secure boot enablement
 2026-03-25 19:26 UTC  (7+ messages)
` [PATCH 1/6] sunxi: move SID MAC fallback from board env setup to EMAC read_rom_hwaddr
` [PATCH 2/6] pinctrl: sunxi: add I2C3 mux for D1/T113-s3 (PG10/PG11)
` [PATCH 3/6] sunxi: add SPC setup for R528/T113 secure boot handoff
` [PATCH 4/6] boot: allow SPL FIT signature verification without DM
` [PATCH 5/6] sunxi: extend binman FIT description for signed SPL images
` [PATCH 6/6] sunxi: add support for NetCube Systems Nagami and associated carrier boards

[PATCH] librem5: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-25 19:00 UTC 

[PATCH] o4-imx6ull-nano: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-25 19:00 UTC 

[PATCH] imx93_frdm: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-25 19:00 UTC 

[PATCH] hikey960: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-25 19:00 UTC 

[PATCH] s5p4418_nanopi2: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-25 19:00 UTC 

[PATCH] engicam: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-25 19:00 UTC 

[PATCH] arm: at91: Drop unnecessary BOARD_EARLY_INIT_F usage
 2026-03-25 19:00 UTC 

[PATCH] spl: Remove unused CONFIG_SPL_FRAMEWORK_BOARD_INIT_F option
 2026-03-25 19:00 UTC 

[PATCH] arm: Remove redundant "xPL_SYS_MALLOC_F default y" entries
 2026-03-25 19:00 UTC 

imx8mm_evk: Broken defconfig for SPI boot?
 2026-03-25 18:08 UTC 

[PULL] Please pull qcom-fixes-24Mar2026
 2026-03-25 17:08 UTC  (2+ messages)

[PATCH 00/13] boot: Make fit_image_load() easier to maintain
 2026-03-25 16:54 UTC  (14+ messages)
` [PATCH 01/13] boot: Split out the first part of fit_image_load()
` [PATCH 02/13] boot: Move call to fit_image_select() and rename it
` [PATCH 03/13] boot: Tidy up setting of the OS arch on host builds
` [PATCH 04/13] boot: Move type and OS checking into a new function
` [PATCH 05/13] boot: Move handling of the load_op into a separate function
` [PATCH 06/13] boot: Move obtaining data from a FIT image into a function
` [PATCH 07/13] boot: Check the image is allowed before setting os.arch
` [PATCH 08/13] boot: Move the architecture check into check_allowed()
` [PATCH 09/13] boot: Move image-decompression into a separate function
` [PATCH 10/13] boot: Move decomp_image() into handle_load_op()
` [PATCH 11/13] boot: Move setting the OS arch into check_allowed()
` [PATCH 12/13] boot: Drop unnecessary data variable
` [PATCH 13/13] boot: Tidy local variables in fit_image_load()

[PATCH] net: phy: dp83867: reset PHY on init to ensure clean state
 2026-03-25 15:36 UTC 

[PATCH] rpi: Update the naming for bcm2712 SoC RevD naming
 2026-03-25 15:31 UTC  (4+ messages)

[PATCH 0/9] ARM: RPi5: Enable PCIe
 2026-03-25 11:51 UTC  (2+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox