messages from 2026-05-27 18:47:08 to 2026-05-29 22:03:31 UTC [more...]
[PATCH v3 0/3] allow control DTB to double as "FIT image"
2026-05-29 22:02 UTC (6+ messages)
` [PATCH v3 1/3] image-fit.c: introduce CONTROL_DTB_AS_FIT config knob
` [PATCH v3 2/3] doc: develop: add section on embedding scripts inside control DTB
` [PATCH v3 3/3] test: hook up test of allowing control DTB to act as FIT image
[PATCH] arm: mvebu: usb: enable Armada 375 in XHCI driver
2026-05-29 20:56 UTC
[PATCH 0/9] fs: add change date to ls output
2026-05-29 20:01 UTC (5+ messages)
` [PATCH 3/9] fs: ext4: print change date in directory listing
Pull request: rpi-2026.07 rc4
2026-05-29 18:46 UTC
[PATCH] CI: Sage: Drop rpi_arm64 lwIP variants
2026-05-29 18:46 UTC (2+ messages)
[PATCH 0/5] mtd: rawnand: zynq: Fixes and software ECC support
2026-05-29 16:39 UTC (6+ messages)
` [PATCH 1/5] mtd: rawnand: zynq: Align the layout structures with the driver namespace
` [PATCH 2/5] mtd: rawnand: zynq: Add comments about very bad practices
` [PATCH 3/5] mtd: rawnand: zynq: Make sure an of node is attached
` [PATCH 4/5] mtd: rawnand: zynq: Do not fail the probe for no reason
` [PATCH 5/5] mtd: rawnand: zynq: Fix Software ECC engine support
[PATCH] mmc: sd: Handle UHS-I voltage signaling without power cycle
2026-05-29 17:21 UTC (5+ messages)
[PATCH v3] clk: imx: don't build i.MX/RTxxxx code for all users of CCF
2026-05-29 16:39 UTC
[PATCH] lmb: Reinstate access to memory above ram_top
2026-05-29 16:30 UTC (6+ messages)
[PATCH] Revert "lmb: Reinstate access to memory above ram_top"
2026-05-29 16:29 UTC
[PATCH v7 00/15] add software ecdsa support
2026-05-29 15:53 UTC (23+ messages)
` [PATCH v7 01/15] ecdsa: fix support of secp521r1
` [PATCH v7 02/15] mbedtls: enable support of ecc
` [PATCH v7 03/15] ecdsa: initial support of ecdsa using mbedtls
` [PATCH v7 04/15] test: lib: ecdsa: add initial test
` [PATCH v7 05/15] drivers: crypto: add software ecdsa support
` [PATCH v7 06/15] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented
` [PATCH v7 07/15] test: py: vboot: prepare integration test for ecdsa
` [PATCH v7 08/15] test: vboot: add "
` [PATCH v7 09/15] tools: fit_image_setup_sig: set required_keynode to -1
` [PATCH v7 10/15] tools: mkimage: pre-load: add support of ecdsa
` [PATCH v7 11/15] tools: binman: "
` [PATCH v7 12/15] boot: "
` [PATCH v7 13/15] tools: preload_check_sign: "
` [PATCH v7 14/15] test: py: vboot: prepare test for global signature with ecdsa
` [PATCH v7 15/15] test: py: vboot: add "
[PATCH v1] mtd: spi-nor: Add gd55lb02gf chips
2026-05-29 15:43 UTC (5+ messages)
` [PATCH v2] "
[PATCH v2] ARM: dts: stm32: add U-Boot specific dtsi for stm32mp157f-dk2
2026-05-29 15:31 UTC
[PATCH v2 0/5] NBX10G: Marvell Armada 8040 Nodebox 10G board support
2026-05-29 15:05 UTC (3+ messages)
` [PATCH v3 "
[PATCH v2 1/1] usb: fix typos in include/usbdescriptors.h
2026-05-29 14:19 UTC (2+ messages)
[PATCH v2 1/1] usb_kbd: remove match string
2026-05-29 13:43 UTC (3+ messages)
[PATCH v2] configs: socfpga: stratix10: Disable mkeficapsule tool build
2026-05-29 12:23 UTC (2+ messages)
[PATCH] dwc3: Fix fastboot re-run failure with flat DTS
2026-05-29 12:22 UTC
[PATCH v3 0/3] Enable Arm SMC watchdog for STM32MP1
2026-05-29 11:12 UTC (4+ messages)
[PATCH v6] tools: mkeficapsule: Rework pkcs11 support
2026-05-29 11:05 UTC
[PATCH v2 1/3] binman: imx8mimage: Handle nxp,boot-from = "fspi"
2026-05-29 10:53 UTC (3+ messages)
[PATCH] arch: arm: force 4K page alignment in linker
2026-05-29 10:18 UTC (2+ messages)
[PATCH v2 0/6] nvme: few fixups
2026-05-29 9:58 UTC (14+ messages)
` [PATCH v2 1/6] drivers: nvme: Log I/O timeouts
` [PATCH v2 2/6] drivers: block: Introduce blk_flush()/blk_dflush()
` [PATCH v2 3/6] drivers: nvme: Implement flush command
` [PATCH v2 4/6] cmd: Add flush support for all blk devices
` [PATCH v2 5/6] drivers: nvme: Export nvme_shutdown()
` [PATCH v2 6/6] docs: nvme: Update QEMU command for testing
` [v2,0/6] nvme: few fixups
[PATCH v2] image-fit-sig: Validate hashed-strings region size
2026-05-29 8:45 UTC (3+ messages)
` [PATCH v3] "
[PATCH v2] board: ti: am62ax: tifs-rm-cfg/rm-cfg: Update DMA resource sharing for CPSW
2026-05-29 7:56 UTC (2+ messages)
[PATCH v1 0/5] nvme: few fixups
2026-05-29 7:54 UTC (13+ messages)
` [PATCH v1 1/5] drivers: nvme: Log I/O timeouts
` [PATCH v1 2/5] drivers: nvme: Implement NVMe flush command (0x0)
` [PATCH v1 3/5] cmd: nvme: Add flush support
` [PATCH v1 4/5] drivers: nvme: Export nvme_shutdown symbol
` [PATCH v1 5/5] docs: nvme: Update QEMU command for testing
[PATCH v2 1/1] efi_loader: validate PE-COFF relocation data
2026-05-29 7:20 UTC (2+ messages)
[PATCH v5 0/7] Improve FIT signature handling
2026-05-29 7:03 UTC (11+ messages)
` [PATCH v5 1/7] qemu-arm: merge built-in DT
` [PATCH v5 2/7] mkimage: define log_err and log_info
` [PATCH v5 3/7] image-fit-sig: Optionally require signatures
` [PATCH v5 4/7] test: vboot: handle CONFIG_FIT_REQUIRE_CONFIG_SIGS in test_vboot
` [PATCH v5 5/7] iminfo: also verify signatures
` [PATCH v5 6/7] test: vboot: refactor run_bootm
` [PATCH v5 7/7] test: vboot: add iminfo checks
[PATCH 0/5] spi: Convert drivers to dev_read_* APIs
2026-05-29 7:00 UTC (5+ messages)
` [PATCH 2/5] spi: cadence_qspi: Use dev_read_addr_index_ptr()
` [PATCH 5/5] spi: ti_qspi: Use device APIs
[PATCH v3 0/6] reset: add board reset type
2026-05-29 3:48 UTC (7+ messages)
` [PATCH v3 1/6] reset: Allow per-board "
` [PATCH v3 2/6] reset: Add explicit cold reset support
` [PATCH v3 3/6] reset: Print reset type on diagnostic console
` [PATCH v3 4/6] reset: x86: Use cpu_hlt() in pch_sysreset_power_off()
` [PATCH v3 5/6] docs: reset: document cold reset option
` [PATCH v3 6/6] tests: reset: add cold/warm reset types
[RESEND v2 0/2] Add support for StarFive VisionFive 2 Lite eMMC board
2026-05-29 3:26 UTC (3+ messages)
` [RESEND v2 1/2] configs: visionfive2: Add VisionFive 2 Lite eMMC DT to OF_LIST
` [RESEND v2 2/2] board: starfive: visionfive2: Support VisionFive 2 Lite eMMC
[PATCH v2] drivers: watchdog: Fix dev_read_addr error check
2026-05-29 2:42 UTC (2+ messages)
[PATCH] rng: jh7110: Fix invalid usage of dev_read_addr
2026-05-29 2:15 UTC (2+ messages)
[PATCH 00/13] virtio: Sandbox emulator plus an assortment of fixes
2026-05-28 18:18 UTC (9+ messages)
` [PATCH 02/13] alist: Allow inclusion from OS headers
` [PATCH 11/13] virtio: emul_blk: Free disk data on remove
[PATCH 2/2] arm: axiado: Add AX3005 based SCM3005 board support
2026-05-28 18:08 UTC (2+ messages)
[PATCH v7 00/22] VBE serial part H: Implement VBE on Rockchip RK3399
2026-05-28 17:10 UTC (22+ messages)
` [PATCH v7 01/22] spl: Adjust xPL symbols
` [PATCH v7 02/22] spl: Allow VBE to handle xPL size
` [PATCH v7 03/22] vbe: Show the margin when using SPL_RELOC
` [PATCH v7 04/22] rockchip: Allow RAM init to happen in SPL on rk3399
` [PATCH v7 05/22] rockchip: dts: Add an fdtmap
` [PATCH v7 06/22] rockchip: dts: Specify the phase in the image
` [PATCH v7 07/22] rockchip: Provide a bootstd configuration
` [PATCH v7 08/22] rockchip: Add SPL into the main FIT
` [PATCH v7 09/22] rockchip: Add a template for SPL
` [PATCH v7 10/22] rockchip: Add a VPL image
` [PATCH v7 11/22] rockchip: Add TPL alternatives
` [PATCH v7 12/22] rockchip: Update rk3399 bootph-tags for VPL
` [PATCH v7 13/22] rockchip: Provide a VPL phase on rk3399
` [PATCH v7 14/22] rockchip: Add symbols for spl_reloc
` [PATCH v7 15/22] rockchip: rk3399: Adjust TPL stack to allow for bloblist
` [PATCH v7 16/22] rockchip: Allow SPL to set up SDRAM
` [PATCH v7 17/22] rockchip: Add a generic-ddr3 rk3399 board
` [PATCH v7 18/22] rockchip: Add documentation for VBE
` [PATCH v7 19/22] gitlab: Add an VBE board to the sjg lab
` [PATCH v7 20/22] rockchip: Set the skip-at-start property correctly
` [PATCH v7 21/22] vbe: Add a bootmeth driver for abrec
[PATCH v1] serial: lpuart: Fix RX FIFO Enable bitmask
2026-05-28 16:28 UTC (3+ messages)
U-Boot TFTP OACK option parser reads past unterminated values
2026-05-28 16:17 UTC (7+ messages)
` [SPAM Warning!]Re: "
[PATCH v2 0/2] This series introduces initial U-Boot support for mach-axiado AX3005 SCM3005 board, a quad-core ARM Cortex-A53 (ARMv8/ARM64) platform
2026-05-28 14:28 UTC (4+ messages)
` [PATCH v2 1/2] arm64: dts: axiado: Add AX3005 SCM3005 device tree
` [PATCH v2 2/2] grm: axiado: Add AX3005 based SCM3005 board support
[PATCH v1 0/4] arm: k3: replace tifsstub runtime filter with per-state FIT configurations
2026-05-28 13:27 UTC (5+ messages)
` [PATCH v1 1/4] arm: k3: select tifsstub via board_fit_config_name_match
` [PATCH v1 2/4] board: phytec: phycore-am62: select tifsstub via FIT config
` [PATCH v1 3/4] board: toradex: verdin-am62: "
` [PATCH v1 4/4] arm: k3: drop redundant tifsstub runtime filter
[PATCH v2] thermal: imx_tmu: extend with QorIQ/Layerscape TMU
2026-05-28 12:57 UTC
[PATCH v1] thermal: qoriq: add Layerscape on-die TMU
2026-05-28 12:55 UTC (4+ messages)
[PATCH] clk: enhance clk-gpio to also handle gated-fixed-clock
2026-05-28 12:42 UTC (2+ messages)
[PATCH] mtd: hbmc-am654: Use dev_remap_addr_index()
2026-05-28 8:35 UTC (2+ messages)
[PATCH v5] tools: mkeficapsule: Rework pkcs11 support
2026-05-28 8:34 UTC (2+ messages)
[PATCH v4 0/4] imx9{4,5,52}: Add Quickboot support
2026-05-28 7:37 UTC (7+ messages)
` [PATCH v4 1/4] imx9: Add support for saving DDR training data to NVM
[PATCH v2 0/6] net: Use dev APIs
2026-05-28 8:00 UTC (8+ messages)
` [PATCH v2 1/6] net: ethoc: Use dev_read_addr_index()
` [PATCH v2 2/6] net: qe: dm_qe_uec: Use dev_read_addr()
` [PATCH v2 3/6] net: calxedaxgmac: "
` [PATCH v2 4/6] net: dc2114x: Use dev_remap_addr()
` [PATCH v2 5/6] net: mvpp2: Use dev_read_addr_index_ptr()
` [PATCH v2 6/6] net: mvpp2: convert FDT access to ofnode API
[PATCH v1] arm: dts: fsl-lx2160a: wdt0 for watchdog node
2026-05-28 1:52 UTC (2+ messages)
[PATCH v1] arm: dts: layerscape: fix many DTS warnings
2026-05-28 1:51 UTC (3+ messages)
` [PATCH v2] arm: dts: fsl-lx2162a-qds: drop &dspi{0,1,2} block
[PATCH v5 0/8] fit: dm-verity support
2026-05-27 23:49 UTC (2+ messages)
[PATCH v2 0/6] reset: add board reset type
2026-05-28 0:02 UTC (9+ messages)
` [PATCH v2 1/6] reset: Allow per-board "
` [PATCH v2 2/6] reset: Add explicit cold reset support
` [PATCH v2 3/6] reset: Print reset type on diagnostic console
` [PATCH v2 4/6] reset: x86: Use cpu_hlt() in pch_sysreset_power_off()
` [PATCH v2 5/6] docs: reset: document cold reset option
` [PATCH v2 6/6] tests: reset: add cold/warm reset types
[PATCH RFC 00/18] rockchip: rk3568: add DRAM controller driver and initialize DRAM at TPL stage
2026-05-27 21:06 UTC (9+ messages)
` [PATCH RFC 02/18] clk: rockchip: rk3568: Fix probe with OF_PLATDATA enabled
[PATCH v1 0/4] reset: add board reset type
2026-05-27 19:59 UTC (6+ messages)
` [PATCH v1 1/4] reset: Allow per-board "
` [v1,0/4] reset: add board "
[PATCH v4 0/6] Relocate U-Boot in the last bank
2026-05-27 19:26 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox