[U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support

[Olof Johansson <olof.johansson@gmail.com>]

On Sep 22, 2009, at 2:50 PM, Wolfgang Denk wrote:

> Dear Ben Warren,
>
> In message <f8328f7c0909131022t700abe65p5083bdc3c4630e0f@mail.gmail.com 
> > you wrote:
>>
>>> I always use 'git am -s', which adds the SOB.   My understanding  
>>> is that
>> maintainers should do this as an indication of approval and help in
>> traceability.
>
> Please feel free to do that, but I consider this just adding
> line-noise, unless you _really_ express special approval.
>
> Which sense would it make if I added a s-o-b to each and every commit
> I'm pulling in from anywhere?

You're not pulling it, you are applying it. And the s-o-b is used to  
show the paper trail of who has touched it. So all you should need to  
backtrack the source of the code change is the list of the s-o-bs.

S-o-b is not an approval of the technical merits of the change. It's a  
pure bookkeeping measure to tell where a piece of code came from and  
who handled it on the way.

BUT in addition to this it's really useful for a newbie like me to see  
who to send a patch to, since it shows the list of maintainership (up  
to the first person that submits his work through git pulls, but that  
seems nonexistent for non-maintainers in u-boot anyway :)


-Olof