From: "Ramon Fried" <rfried.dev@gmail.com>
To: "Tim Harvey" <tharvey@gateworks.com>,
"Joe Hershberger" <joe.hershberger@ni.com>
Cc: "Hannu Lounento" <hannu.lounento@ge.com>,
"Martyn Welch" <martyn.welch@collabora.co.uk>,
"Sebastian Reichel" <sebastian.reichel@collabora.co.uk>,
"U-Boot Mailing List" <u-boot@lists.denx.de>
Subject: Re: [PATCH] net: e1000: do not attempt to set hwaddr for i210 without FLASH
Date: Sat, 12 Jun 2021 21:23:42 +0300 [thread overview]
Message-ID: <CC1ULGUEDKTQ.304N5AUTNGY3F@stdcall-pc> (raw)
In-Reply-To: <CAJ+vNU367oEYmP0bRJbUN-zW6FegXwQcw42QMyBLCEKupqhh=A@mail.gmail.com>
On Fri Jun 11, 2021 at 7:01 PM IDT, Tim Harvey wrote:
> On Thu, Apr 22, 2021 at 5:11 PM Ramon Fried <rfried.dev@gmail.com>
> wrote:
> >
> > On Fri, Apr 16, 2021 at 11:25 PM Tim Harvey <tharvey@gateworks.com> wrote:
> > >
> > > commit f1bcad22dd19 ("net: e1000: add support for writing to EEPROM")
> > > adds support for storing hwaddr in EEPROM however i210 devices do not
> > > support this and thus results in errors such as:
> > > Warning: e1000#0 failed to set MAC address'
> > >
> > > Check if a flash device is present and if not return -ENOSYS indicating
> > > this is not supported.
> > >
> > > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> > > ---
> > > drivers/net/e1000.c | 4 ++++
> > > drivers/net/e1000.h | 1 +
> > > 2 files changed, 5 insertions(+)
> > >
> > > diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
> > > index 694114eca7..60613b7df0 100644
> > > --- a/drivers/net/e1000.c
> > > +++ b/drivers/net/e1000.c
> > > @@ -5673,6 +5673,10 @@ static int e1000_write_hwaddr(struct eth_device *dev)
> > >
> > > DEBUGOUT("%s: mac=%pM\n", __func__, mac);
> > >
> > > + if ((hw->eeprom.type == e1000_eeprom_invm) &&
> > > + !(E1000_READ_REG(hw, EECD) & E1000_EECD_FLASH_DETECTED_I210))
> > > + return -ENOSYS;
> > > +
> > > memset(current_mac, 0, 6);
> > >
> > > /* Read from EEPROM, not from registers, to make sure
> > > diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
> > > index 072851ba31..082154a997 100644
> > > --- a/drivers/net/e1000.h
> > > +++ b/drivers/net/e1000.h
> > > @@ -1245,6 +1245,7 @@ struct e1000_hw {
> > > #define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
> > > #define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */
> > > #define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/
> > > +#define E1000_EECD_FLASH_DETECTED_I210 0x00080000 /* FLASH detected */
> > > #define E1000_FLUDONE_ATTEMPTS 20000
> > > #define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
> > > #define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
> > > --
> > > 2.17.1
> > >
> > Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
>
> Joe / Ramon,
>
> Can one of you pick this up? If I need to re-submit with Ramon's
> 'reviewed by' please let me know.
>
> Best regards,
>
> Tim
Applied to u-boot-net/master, thanks!
Best regards,
Ramon Fried
prev parent reply other threads:[~2021-06-12 18:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-16 20:25 [PATCH] net: e1000: do not attempt to set hwaddr for i210 without FLASH Tim Harvey
2021-04-23 0:11 ` Ramon Fried
2021-06-11 16:01 ` Tim Harvey
2021-06-12 18:23 ` Ramon Fried [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CC1ULGUEDKTQ.304N5AUTNGY3F@stdcall-pc \
--to=rfried.dev@gmail.com \
--cc=hannu.lounento@ge.com \
--cc=joe.hershberger@ni.com \
--cc=martyn.welch@collabora.co.uk \
--cc=sebastian.reichel@collabora.co.uk \
--cc=tharvey@gateworks.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox