U-Boot on EDB9312 (was: RE: [U-Boot-Users] Binary file cat)

[Adam Bezanson <bezanson@comcast.net>]

They weren't made public yet but I can certainly do so. I'll look to update
my tree to the latest CVS (it's been awhile) and provide Wolfgang with a
patch to incorporate into CVS.

Regards,
Adam

-----Original Message-----
From: u-boot-users-admin@lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net] On Behalf Of llandre
Sent: Friday, July 30, 2004 12:08 PM
To: Adam Bezanson
Cc: u-boot-users at lists.sourceforge.net
Subject: U-Boot on EDB9312 (was: RE: [U-Boot-Users] Binary file cat)

Hi Adam,

I've just read the message about your port of U-Boot for EP9312.
Next month I'll start to work on the EDB9312 evaluation board and I want to 
use U-Boot as bootloader.
As I don't want to reinvent the wheel, I was wondering if your patches were 
made publicly available. It seems they were not included in the CVS
repository.



Thanks in advance,
llandre

DAVE Electronics System House - R&D Department
www.dave-tech.it

>Thanks, I'll give that a try. I should have clarified "my processor" a
>little more. It's a Cirrus Logic EP9312 and yes indeed there is a boot
>rom internal to the processor that does these checks for a signature
>that I've put in this header. Essentially it's a way for it to determine
>if there's a valid image in flash to boot from, otherwise it tries to
>boot from other interfaces.
>
>I certainly didn't want to do a global change to a Makefile for
>something like this.
>
>Regards,
>Adam



-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users